sm 74 4 used for sale

Key data: 1 KW, 400 V

Equipment Description Engine Manufacturer / Model: Wärtsilä 4R32 LN-E VASA Configuration: 4-cylinder Fuel Type: Heavy Fuel Oil / Diesel Oil compatible Year of Manufacture: 1994 Total Operating Hours Since New: 7,430 hours Engine Control System: PLC Intel Pentium with Wärtsilä Operator Interface Alternator Manufacturer / Type: ABB ALPC 560 Rated Output: 1,781 kVA Voltage: 400 V Frequency: 50 Hz Scope of Supply The offer includes: Complete engine assembly Alternator coupled to engine Standard engine-mounted auxiliaries Existing PLC control system Available documentation and manuals (if available) Condition The generating set is offered in used condition. The unit has accumulated only 7,430 operating hours since new, indicating comparatively low utilization for this engine type. The equipment can be supplied: As inspected / ex-location Inspection by  ...

Capacity: 250 - 400 ton V ? Ring nominal force: 20 - 200 ton Counter ram nominal force: 10 - 100 ton Ram stroke: 30 - 200 mm V-Ring stroke: 40 mm Counter ram stroke: 40 mm Max. die size: 765 x 760 x 610 mm Number of strokes: 40 s.p.m. Approach speed: 120 mm / sec Return speed: 135 mm / sec Working speed: 5 - 50 mm / sec Die Weight total: 2400 kg

feed pressure: 24 bar liter capacity: 160 l/min total power requirement: 1,5 kW weight of the machine ca.: . t dimensions of the machine ca.: . m High pressure pump The technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale, only our terms and conditions of business and sale apply. About usmore than 400 of our own machines in stockover 12000 m² storage area, crane capacity 70 tmore than 1000 articles accessories for your workshopIf you want to sell machines production lines or your company, please contact us.You will find further offers on our website. Visits are possible by arrangement.We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw size:45 mm injection shot weight in Polysterol:149 g/PS closing pressure:100 kN

grinding length:400 mm workpiece weight:250 kg weight of the machine ca.:4,1 t swing diameter:250 mm grinding spindle speed:2387, 2938 U/min

Stock# U2443-4 Used stainless steel jet stream mixer by Ystral Gmbh (DE) type Y12.500L.LL/LDT-4DA GMP. Agitator is directly driven by el motor 12.5 / 3.5 kW, 1465/725 rpm, 400 V, 50 hz. Shaft has working length 1100 mm. Cage has internal diameter 245 mm. Three blade propeller has diameter 200 mm.

The JMC 407 is the top seller among our alligator scissors. It is cost-effective, has a sufficient blade length and enough power for most metal recycling tasks. It is suitable for cutting many materials, such as profiles, pipelines, motors, cables or gearbox housings. The shears are also often used for cleaning scrap metal or cutting vehicle radiators. The machine has a control system without electronics and a manually adjustable hold-down device, which also acts as a protective cover. Using the foot pedal, the scissors can be used in single or continuous operation. The opening width can be adjusted using simple clamping screws. The scissors are from our demonstration pool and can of course be viewed or tested. Further information at BPS Recyclinganlagen GmbH at infoRecyclinganlagen.info

Harrison M400 Ø 430 x 1000 mm Distance between centers: 1000 mm Swing over bed: 430 mm Swing over cross-slide: 254 mm Diametre of main spindle bore: 65 mm Power on main spindle: 7,5 kW Number of speeds: 10 > 2000 rpm Length: 2740 mm Width : 1000 mm Height: 1270 mm Weight: 2 ton

turning diameter:360 mm turning length:520 mm total power requirement:20 kW weight of the machine ca.:3,8 t dimensions of the machine ca.:3 x 2 x 2 m

max. wheel diameter:600 mm max. module:10 min. module:2 total power requirement:1,4 kW weight of the machine ca.:0,68 t dimensions of the machine ca.:1,6x0,75 m diameter of hob:15 mm gear width:140 mm

Inv. Num. : 8264 Type: MA-400HA Producer: OKUMA Created: 2008 Parameters: Work table length: 400 mm Work table width: 400 mm Maximum spindle speed: 8000 1/min X-axis travel: 560 mm Y-axis travel: 610 mm Z-axis travel: 625 mm

Manufacturer: Engel Verstellmotor Geräteträger, Year: 1994, Type: Serie A/GNM 4150-B5.2, Volt/Hz: 42/3,1 mpere, pm: 3000, Year :1994

x-travel:1120 mm y-travel:370 mm z-travel:410 mm total power requirement:14,5 kW weight of the machine ca.:3850 kg dimensions of the machine ca.:3,5 x 3,5 x 2,2 m Table dimensions:400 x 1600 mm spindle taper ISO:50

diameter:400 mm total power requirement:110 V, 125 W weight of the machine ca.:72 kg

grinding diameter:4000 mm centre height:310 mm weight of the machine ca.:17 t dimensions of the machine ca.:10.5 x 3.6 x 1,9 m

Inv. Num. : 8265 Type: FU 400/V/2 Producer: Heckert Generated: Parameters: Work table length: 1600 mm Work table width: 400 mm Maximum vertical spindle speed: 1400 1/min X-axis travel: 1150 mm Y-axis travel: 370 mm Z-axis travel: 430 mm Machine height: 1980 mm Machine length: 2490 mm Machine width: 2270 mm Machine weight: 3850 kg

Hersteller : Ferrocontrol, Spare part from machine: Plattenlager Systraplan, Type: FIPC 1.2.-CF-426B-010-C1, Control: 761,

cutting range for steel to:20 mm total power requirement:3~ 220 / 380 V weight of the machine ca.:100 kg dimensions of the machine ca.:500 x 750 x 1000 mm

Inv. Num. : 8273 Type: Bylas 4020-2 Producer: Bystronic Created: 1994 Parameters: Control system: Bystronic CNC 90 Maximum power: 3.5 kW Work table length: 4000 mm Work table width: 2000 mm Maximum sheet thickness when cutting (stainless steel): 0.2-6 mm Maximum sheet thickness when cutting (aluminum): 1-6 mm Maximum sheet metal cutting thickness (steel): 0.2-12 mm Maximum sheet metal cutting thickness (copper/brass): 1-4 mm Maximum sheet metal cutting thickness (galvanized): 0.2-8 mm Maximum woodcut thickness: 50 mm Maximum cutting thickness for plastic: 50 mm Equipment: Replacement resonator (2kW) Spares

Decanter Z53-4/454 manufactured in stainless steel by FLOTTWEG in 2003. Technical features Model Z53-4/454 Year of manufacture 2003 Maximum speed 3250 rpm Maximum sediment density 1.3 g/cm³ Drum inner diameter 529 Discharge diameter 315 mm Seal material NBR Working temperature 0/100 ºC Drum motor 63 kW mm Screw motor 15 kW Equipment configuration Electrical panels Hydraulic power pack Slide gates Transport information Weight 5300 Kg Documentation CE Certificate Maintenance Manual Operation Manual Drawings Electrical Diagrams Electrical Panel Manual Condition Inspected Made by FLOTTWEG

Decanter Z4E-4/454 made of stainless steel by FLOTTWEG in 2004. Material Stainless steel Technical features Model Z4E-4/454 Year of manufacture 2004 Maximum speed 4200 rpm Maximum sediment density 1.4 g/cm³ Working temperature 0/100 ºC Documentation CE Certificate Maintenance Manual Operation Manual Drawings Electrical Diagrams Electrical Panel Manual Condition Inspected Made by FLOTTWEG

Pressure:175 t chamfer lenght:4100 mm distance between columns:3600 mm column arm:410 mm ram stroke speed:180 mm/sec return speed:135 mm/sec working speed:10 mm/sec work stroke:275 mm oil volume:200 l dayligth:550 mm table height:900 mm table width:90 mm total power requirement:15 kW weight of the machine ca.:12000 kg dimensions of the machine ca.:5100 x 2150 x 2850 mm

material width:450 mm material thickness:0,5 - 1,0 mm no. of straightening rolls:6 straightening roll diameter:53 mm number of draw-in rolls:2 diameter of draw-in rolls:96 mm power requirement:1,0 kW weight:0,65 t dimensions (WxDxH):1,0 x 1,0 x 1,55 m

hole diameter in sheet thickness: Ø 30 in 12 mm hole diameter in sheet thickness: Ø 19 in 19 mm pressure capacity max.: 45 to weight of the machine ca.: 1.700 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Indramat Permanent Magnetmotor , Type: MAC093C-0-FS-4HC/110-A-0/WI634LX, FREETEXT1: Atlanta Getriebe, FREETEXT2: Atlanta 5844097, FREETEXT3: P 4,25, FREETEXT4: 2,9 kg, FREETEXT5: N1 1500 U/min,

Manufacturer: Giardina, Type: Dualtech 401, Year: 2007, Control: Programm, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 1500, Spraying line: Ja, Conveyour system: Band, Laquer circles: 3, by rollers: Ja, Jet dryers (number): 2, Sanding machines (number): 1, Design sanding machine no 1: Costa CT 32/1350, IR dryers (number): 1, Belt conveyors (number): 1, Jet dryers (number): 2, Year :2007

Manufacturer: SEW Umrichter, Type: Movitrac 3005-403-4-00, Serial number: 14607, Serial number: 8256578, Serial number: 14607, FREE TEXT: Technische Bitte den Bildern entne,

Manufacturer: Tesa SA Vermessungtisch, Type: Messfeld 560 X 750 X 410 MM<CRLF>, FREETEXT1: Rechner und Steuerung sind vorhanden, FREETEXT2: Anlage wird vor <CRLF>Verkauf auf Funtion geprüft,

Manufacturer: Frenostat Bremsgerät Typ 2000 Hilger und Kern, Type: 400/60/3132000, Model: 137700,

Manufacturer: KEB Homag Gruppe, Type: 07.FO.RO1-4AO8, Model: 95120275/135514, Hz: 50/60 HZ, Power Output: 1,8 KVA,

Manufacturer: Siemens Z Achsmotor IMA Bima 410, Type: Permanentmagnetmotor , Model: 1 FT5064-1AG71-4BB0, Serial number: NoEH063 7112 01 004 VDE 0530,

Manufacturer: NUM 1060 Telemecanique komplette Einheit mit Bildschirm, Type: 44BE, Serial number: 205202101/1453, Year: 2001, Hz: 50-60, Year :2001

Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann, Type: 657.452.69,

Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann, Type: 657.451.03,

Hersteller : Kuhnke Streckenkarte, Spare part from machine: Heesemann, Type: 657.451.03,

Manufacturer: Becker , Type: SV.5.430/2, Year: Turbine zum Kühlen von Transportkette, Control: A 1781760, Year :Turbine zum Kühlen von Transportkette

Manufacturer: Meinert Plattenlager, Type: Puffer Portal P 420, Year: 2005, Storage program: 3-Teck, Online connection to following machines: Säge, Plattenstärken min-max mm: 16-25, Plattenlängen min-max mm: 240-2800, Plattenbreite min-max mm: 2100, Beschichtet Platten: yes, Massivholzplatten: yes, Halbformatplatten-Format: yes, Einlagerplätze: 5, Auslagerplätze: 1, Netto Platzanzahl: 35, Verstellbare Saugtraverse : yes, Span length mm: 9500, Geschwindikeitfahrträger Brücke m/min: X-80/Y-150/40-Z-40, FREE TEXT: 1 X Querverfahrwagen/Bodenrollenbahnen 4 Stück/, Year :2005

Manufacturer: Klöckner Möller AMX Frequenzumrichter, Type: AMX3-460-16-400, FREE TEXT: ULN:460 F:50/60, Free text 1: UN: 460V , Free text 2: IN 16 Ampere,

Manufacturer: KEB Homag Gruppe, Type: 07.FO.RO1-4AO8, Serial number: 95120264/135514, Hz: 50/60Hz, Power Output: 1,8 KVA,

Manufacturer: Becker Vakuumpumep, Type: 425 BSK, Year: 2000, Volume flow m³/min: 25/30, Enddruck mbar: 600<CRLF><CRLF>, revolutions rpm: 1750, Drive power kW: ca. 1 kw, Year :2000

Manufacturer: Kuper, Type: KFE TAN 2 1600/450, Year: 1979, Control: Kuper, Foil wrapping machine mm: 1600, Foil stations: 1, Welding frame dimensions mm: 1450, Intermediate transport mm: 3.000, Shrinking tunnel mm: 4.800, Schrumpftunnel kW Leistung: 70, Heating: Elektro - 59 kW, Through running hight mm: 200, Working width mm: 800, Conveyour system: Band/Stange, Year :1979

Manufacturer: IMA, Type: Quadromat 4012 F, Year: 1995, Program: yes, Min-max edge material mm: 0,5 - 8,0, Min.-max. workpiece length in mm: 250, Min-max feed m/min: 10, Premilling: yes, Min.-max. batten magazine mm: 0,5 - 8,0, Mitre stations: yes, radius milling: yes, Corner tracing type: yes, 2 Motoren: yes, Year :1995

Manufacturer: Siemens Trafo , Type: 4AV3494-0AG00,

Manufacturer: Igomak, Type: T 450, Year: 1976, Hydraulical/pneumatical: Hydraulisch, Press depth mm: 500, Press length mm: 1000, Press press opening max mm: 450, Number of cylinders: 3 Zylinder 180 mm Durchmesser, FREE TEXT: Heizplatte oben/ 7,5 Kw Leistung, Year :1976

Manufacturer: Wire Electronik, Type: GNV 451-20/130, Seriennummer: 85957, Frequenzumrichter: yes, Input: 3X 130 Volt, Output DC Volt: 220 V/50-60 HZ,

Manufacturer: Doppelgehrungssäge, Type: DKG 400 A, Year: ca.1984, Control: Hand , Pneumatical clamping system: yes, Saw blade tiltable up to °: 45-90, Schnitthöhe min-max mm: ca. 70, Schnitttiefe min-max mm: 100, Schnittlänge min-max mm: 3500, Power saw engine kW: 3 KW,100 Hz, Width adjustment by engine: yes, Action controlled: yes, Saw blade diameter max mm: 300, rotations controlled: 4500, Bohreinheit Horizontal: 100, On customer order: inkl. Bohrstation, Year :ca.1984

Overview This Labeling Machine was built in 2005 by Gernep. It was in operation in a fruit juice plant in Germany till 01/2022. In this company it was only used in single-shift operation for about 100 days a year, which is why the condition of the machine is still very good. Tech Specs: Capacity: 6,000 bph at 1L bottles Number of aggregates: 2 Accessories: Formats for 1.0 l VdF glass bottles, 0.7 l VdF, 0.2 l glass bottles goiter neck Various spare parts included

This Pinacho STH 400-105×3000 was manufactured in 2017. A robust horizontal turning machine with a swing over bed of 400 mm and a distance between centers of 3000 mm. Features a high-torque spindle and CNC-controlled feed for precise heavy-duty turning. Ideal for machining shafts, pipes, and flanges. Consider the opportunity to buy this Pinacho STH 400-105×3000 horizontal turning machine. Contact us for more information.

This 3-axis Gildemeister CTX 400 Serie 2 was manufactured in 2002. It features a spindle speed of up to 5,000 rpm and a z-axis travel of 635 mm, along with an x-axis travel of 570 mm over the bed. The machine includes a 12-position turret and is equipped with a 3-jaw chuck, chip conveyor, and coolant system. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 400 Serie 2 machine we have for sale. Contact us for further details.

Manufacturer: Indramat Motor mit Getriebe Atlanta, Year: 1999, Type: MAC93C-0-FS/4HC/110-A-0, Kw output: ca.10, Bauart Flanschmotor: yes, Preis pro Stück Euro: 1500, Available: sofort, Year :1999