126,668 used machines on RESALE, but how to find them? Machine Search
-Thermal oil magnetic pump with motor -Pump manufacturer Sterling Fluid Systems Model: ZTTZ 40160 / AP 1EO 1B 2 Engine see pictures
Complete processing cell with robot and ..., IRB 4400/45kg, ABB, used Top Special price ! This system is sold for an absolute special price of only 8% of the purchase price. If you have a VAT number, we will gladly issue an invoice without VAT. Used, top condition. Due to a series end, this processing cell is free and sold. The machine will be checked by us and can be tested by us before a possible purchase. The robot was regularly serviced by ABB and had an easy process step to complete. We cannot accept any further warranty. Complete deburring cell from Protex: A workpiece is placed in the processing shaft from the outside. The part is clamped onto the fixture. The robot picks the correct tool from the tool storage location and begins processing. The built-in swivelling table can be used to rotate the workpiece and carry out a further machining step. The chips fall into a ...
Specifications Cutting width: 5.8 x 50 mm Year of construction: 2003 Productivity: approx. 120 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: approx. 354 mm/s the security level: 3 Power supply: 400 V/4 kW
Specifications Cutting width: 3.8 x 50 mm Year of construction: 1997 Power supply: 400 V/ 4 kW Price: on request the safety step: DIN 66399 O-2/P-3/T-3/E-2/
Robot with controller and accessories, IRB 4400/45, ABB, used Top Special price ! This robot is sold for an absolute special price. If you have a VAT number, we will gladly issue an invoice without VAT. Used, top condition. Due to a series end, this robot is free and sold. The machine will be checked by us and can be tested by us before a possible purchase. The robot was regularly serviced by ABB and had an easy process step to complete. We cannot accept any further warranty. The system consists of: 1) Robot, ABB, IRB 4400/45 Type B M2000 Foundry version, 6 axes 2) Robot controller, ABB, type S4Cplus, 3) Schunk quick-change system SWK 040, 1x male 2x female 4) Control cabinet with 2 SCA-B4-70 10, E Motion servo amplifiers on the robot 5) All robot cables 8m and cabling of all devices with industrial plugs
Cutting width: 5.8 mm Year of construction: 1993 Productivity: approx. 100 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: 354 mm/s the safety standard DIN 66399: P2 Power supply: 400 V / 4 kW Machine is fully functional, after technical inspection. Price also includes the paint renovation. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
Part Number: 7687 SPECIFICATIONS - inlet width 540mm - inlet height 300mm - shaft width 630mm - shaft diameter 700mm - knife length 630mm - number of knives 2pcs - sieve dimensions 40x40mm - toothed pulling shaft at the bottom - lower shaft motor 4kW - toothed pulling shaft from above - upper shaft motor 4kW - belt feeder - length of the feeding belt 4720mm - width of the feeding belt 500mm - main motor 75kW - Autoewers (adjustable) - total dimensions of the machine length/width/height 3100x2000x1830mm - total dimensions of the feeder length/width/height 4800x780x980mm - weight about 5000kg ADVANTAGES – made in Germany – autorewers – used chipper, very good condition Net price: 120900 PLN Net price: 28447 EUR depending on the price of 4.25 EUR (Prices may change with higher fluctuations)
see performance data on photo with data
table diameter: 400 mm table load: ? t table height: 140 mm total power requirement: kW weight of the machine ca.: 100 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine is in good technical condition, a test run is possible by prior arrangement. OKUMA 5-axis vertical machining center MU-400VII with OSP-P300M-H – Tool magazine for 48 tools, BT40 (or Big Plus) – Tool breakage detection incl. automatic length measurement – Preparation for the function of automatic zero point shift (incl. software) – Collision avoidance system for 4-/5-axis milling centers – Coolant pump 0.8 kW instead of the standard version 0.25 kW – Flush cooling – Function for automatic zero point displacement incl. workpiece measurement, Renishaw OMP60 probe – Cutting edge control for 5-axis machining – Super NURBS Type A for 5-axis centers –Conveyor
Specifications Industrial shredders IDEAL 4104 Shredder Cutting width: 6 mm Power supply: 400 V/ 4 kW the safety step P2 DIN66399-1 Year of construction: 1993 Productivity: ok. 70 sheets (DIN A4, 70g/m²) Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
Specifications Cutting width: 12mm, 9mm, 6mm, 3mm Year of construction: 1988-1989 Productivity: approx. 70 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: approx. 200 mm/s the security level: P1 - P2 Power supply: 380 V/2.2 kW Machine is fully functional, after technical inspection We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
An original control cabinet that was dismantled by PAAL Konti 275 C, built in 1994. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325,425, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
Aircooled chiller/Heat pump EMICON PAE 4902 S KC 488 kW / 570 kW Cooling capacity: 488 kW / 138.76 tons (12/7 — 35°C) Heating capacity: 570 kW / 162.08 tons (40/45 —7°C) Year of manufacture: 2013 Options: Heat pump. Hydraulic module. Recuperation. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 3 pcs. Copeland ZP385KCE-TWD 522 (scroll) + 1 pcs. Bitzer GSD80385VAB4-2 (scroll) + 2 pcs. Bitzer GSD80295VAB431 (scroll) Type of refrigerant: R410a Number of fans: 8 pcs. (EC-fans) Hydraulic module: 2 pcs. water pump Wilo DL80/160-11/2, expansion vessel. + 1 pcs. water pump Wilo IPL65/170-1.1/4 (Recuperation) Dimensions: 4.85x2.3x2.56 m Weight: 4495 kg Condition: Good
; Gross weight [kg]: 13500; Accessories: 40FT HC Unused Genset Container
; Power [PS]: 538; Engine: Scania DC13 320A 02-63; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 370
; Power [PS]: 479; Gross weight [kg]: 3900; Engine: Volvo TAD1382GE; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 320
; Power [PS]: 36; Gross weight [kg]: 835; Engine: Yanmar 4TNV98C-33G; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets:, CEE 63A 400V 5P, CEE 32A 400V 5P, CEE 16A 230V 3P, , Prices when changing alternator options may differ from the price online.; Water Tank Volume [l]: 100
; Power [PS]: 48; Gross weight [kg]: 1000; Engine: Yanmar 4TNV98CT-44G; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets:, CEE 63A 400V 5P, CEE 32A 400V 5P, CEE 16A 230V 3P, , Prices when changing alternator options may differ from the price online.; Water Tank Volume [l]: 120
Gallus EM 430 S (6 colors) Year of construction 2017 - Machine speed 1 – 150m/min (max. depending on the product
Process chiller / chiller air-cooled, Type: Phoenix PNG2 4302 HEX MTA S.p.A. The Phönix PNG2 4302 HEX are compact chilled water chillers that are suitable for outdoor installation. - Shell-and-tube evaporators, - Electronic Explosion Valves - Shut-off valves for compressors, - System with compressors and hydraulic soundproofing panels - Ambient temperature down to -20 °C - Storage tank and double P2 pump - Metal mesh protective filter for condenser coils (factory-installed) Cooling capacity (kW): 491 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 84 Available delivery pressure bar: 1.8 Ambient Temperature (°C): 32 Refrigeration circuit: Refrigerant R513A, GWP 631, safety classification A1. Refrigeration Circuits (Quantity): 2 Compressors (quantity): 2 Power levels (%): 12.5 to 100 infinitely variable Electrical data: V ...
Process chiller / chiller air-cooled, Type: Phoenix PNG2 4302 HEX MTA S.p.A. The Phönix PNG2 4302 HEX are compact chilled water chillers that are suitable for outdoor installation. - Shell-and-tube evaporators, - Electronic Explosion Valves - Shut-off valves for compressors, - System with compressors and hydraulic soundproofing panels - Ambient temperature down to -20 °C - Storage tank and double P2 pump - Metal mesh protective filter for condenser coils (factory-installed) Cooling capacity (kW): 491 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 84 Available delivery pressure bar: 1.8 Ambient Temperature (°C): 32 Refrigeration circuit: Refrigerant R513A, GWP 631, safety classification A1. Refrigeration Circuits (Quantity): 2 Compressors (quantity): 2 Power levels (%): 12.5 to 100 infinitely variable Electrical data: V ...
REF-2034 RISCO CONTINUOUS VACUUM SAUSAGE STUFFER Continuous vacuum sausage filling machine Manufacturer: RISCO Model: RS-4003-320SC Year: 1998 Power: 4.5kW Voltage: 400V. 50Hz. Three-phase Weight: 560kg Overall dimensions: 1,000mm width, 800mm length, 1,970mm height
ZASO MSA-4PS beam welding line was built in 2009 in Poland by ZASO Polski Sprzęt Spawalniczy. The machine enables precise longitudinal welding of, among others, plate girders, T-beams, I-beams and H-beams, using the MIG/MAG or SAW method. The applied technical solutions fully automate the process, with the guarantee of obtaining the highest quality welds. The machining process is performed by two torches with integrated correction slides, which allow them to be moved remotely in two axes. A special frame clamp system holds the welded parts throughout the process, without the need for preassembly or the use of special tooling. The overriding control system also synchronises the work travel with the welding power sources. The ZASO automatic welding machine is also distinguished by its modular work table, consisting of up to five modules, each 6 m long. It has an integrated cooling s ...
New industry-standard hotbox for up to 400 bar and up to 28 litres per minute. EQUIPMENT - Epoxy coated steel frame with stainless steel cover - 4-wheel chassis with solid rubber tyres - Connection hose 1,5m - Water inlet temperature max. 60° - Heating capacity approx. 90 kW - Water outlet temperature in the steam range up to max. 140°C - With thermal switch and flow monitor Diesel tank: 20L Power supply: 1x 230V Dimensions: (L x W x H): 700mm x 570mm x 800mm Weight: 65kg Shipping possible. Errors and prior sale excepted. We refer to our terms and conditions.
This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: Premus Precitool Type: Preciset 420 Measuring range X: 420 mm Measuring range Z: 420 mm Pressure: 6-8 bar Frequency: 50/60 Hz Power: 600 VA Voltage: 100-120 V~ / 200-240 V~ Weight: ~120 kg Accessories: Data clips incl. coding section zidCode Scanner All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health. Further legal Information can be found on the website of Witzenmann GmbH under the keywords "Imprint", "Terms and Conditions" and "Data Protection".
Multi-blade saw with feed belt, suitable for the very precise cutting of low materials. The perfect solution for parquet manufacturers. Technical parameters: Power of the main motor : 3 / 4 kW Diameter of the shaft: 30 mm Length of shaft: 400 mm Width of the feed belt: 400 mm Power of the feed motor: 0.55 kW Feed speed : 2 - 12 m/min Tool diameter : 300 mm KuSING has been manufacturing woodworking machines since 1991. Machine in stock.
; Gross weight [kg]: 4560; Engine: Iveco CURSOR13TE3A.S551; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 650
The new powerful dry-running pumps: The ADH series is specially designed for solar developed for the demanding processes of the semiconductor and LED markets, With a suction capacity of 600-4500 m3/h. Semiconductors: High H2 pumping rate The performance of the ADH series brings the following advantages to the process: -ADL process performance: high pumping efficiency of light gases enables faster chamber emptying between process steps - Epitaxy and EUV: high pumping speed and high flow rate Tolerance meets the most demanding process specifications Adixen AD30K dry pump, high vacuum, AD 30 KL Manufacturer: Alcatel Adixen Type: AD30K.H Year of manufacture: 2008 Adixen AD100K.H Manufacturer: Alcatel Adixen Type: AD100K.H Year of manufacture: 2008 Vacuum pump: Manufacturer: AERZEN Type: GM 2000 CM-C Speed: 6000 rpm Voltage: 200-460 V Frequency (mineral oil/PFPE ...
X - axis 600 mm Y - axis 450 mm Z - axis: 450 mm B - Axis - 120 / + 45 ° C - Axis 360 ° Spindle speed range 20,000 rpm Spindle drive 18 KW Torque 91 Nm Tool holder 63 SK Pallet size 350 x 350 mm Large pallet load 150 kg Number of tool locations in the magazine 60 Large tool diameter 80 (125) mm large tool length 200 mm Gross tool weight 6 kg Tool change time approx. 3 sec. Feed range m/min Express feed m/min Rapid traverse B - axis 50 rpm Rapid traverse C - axis 140 rpm Machine weight 8100 kg Machine dimensions 6.6 x 4.0 x 2.8 m CNC HEIDENHAIN iTNC 530 Electr. Handwheel Probe BLUM Laser Direct displacement measuring systems 60-speed tool changer NC - Swivel rotary table (Torque) 7-fold pallet changer Spindle coolers SIGMATEC 15 / 900 cbm/h Oil Mist Extraction Internal coolant device 18 - 70 bar Conveyor
New brush machine KUSING K2Le-400 Working width 400mm Working height up to 310mm (with brushes Ø 250mm) 2 working heads 2x 4kw Feed speed 2-12 m/min. Suitable for brushes Ø 250mm, L 400mm, D 40mm. Motorized spindle lift. Weight 1100 kg. The machine of the highest and heaviest category, suitable for serial production and heavy work.
Fork carrier or tine adjustment device incl. 4 tines for Kalmar DCF 60 Kaup 4T419N4, used, tight, ready for use
PVC Compounding Plant, Hot/Cooling Mixer A hot/cooling mixing system including accessories must be handed in. The control system (PLC) is outdated and needs to be reinstalled. The system is still installed and must be handed in from the site. Hot mixer: Henschel Fluidizing Mixer FM 1500 A Engine power: 180/280 kW, 2-speed 750/1500 rpm Külmischer: Henschel Cooling Mixer KMH 4500 Double jacket, 6 mixing tools, 77 rpm Motor power 55 kW Accessories: - Liquid scale 25 kg - Liquid scale 250 kg - Weighing container for powdered media 650 kg - Conveyor belt for bag addition - Feeding station for big bag with discharge aid and rotary valve (Not shown on P&I) - Weighing container for plastic recyclate 600 kg - Transmitter and buffer tank for discharge from cooling mixer - Kaeser EB 420 C suction blower - Suction blower (blue)
Small compact brush machine for companies that are just starting out with brushing. Specifications: Working width 400mm Working height n.a. (or limited by the height of the feeder) 1 working head 3 kW (4kw optional). Suitable for brushes dia.250mm, L 400mm, d40mm. Brush from below, without feed is possible to work manually. Made in Slovakia, EU. Parameters adjustable on request. The price is without feeder and without tools
We sell 32 x Cisco 9200L-48P-4G-E, 2 x Cisco 9500-16X-E In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and components in refurbished conditions from ...
Small compact brushing machine for companies that are just starting brushing or are looking for a compact machine for processing heavy wood Specifications: Working width 400mm Working height n.a. (or limited by the height of the feed) 2 working heads 3 kW (4kw optional). Suitable for brushes dia.250mm, L 400mm, d40mm. Brush from below, without feed is possible to work manually. Made in Slovakia, EU. Parameters adjustable on request. The price is without feeder and without tools
We sell These are original Cisco SFPs. 100 x QSFP-40G-SR-BD, 44 x X2-10GB-SR We will sell the complete package only to the highest bidder early next week. In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are onl ...
2018 Forge from 60 to 400 Ton Forging and Annealing Furnace ATI furnace It is made for heat treatment of steel (originally 100Cr6 steel). Possible customers : automotive suppliers The last heat treatment on this line was made in 2018. For a better industrial usage, the supervision of the line need to be upgraded. The original constructor is FDI (Deleau Furnace), which was bought by ATI Furnace ati furnace nabertherm
; Gross weight [kg]: 800; Engine: Perkins 403A-15G2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger, Including: sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55
; Gross weight [kg]: 798; Engine: Perkins 404D-22G; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger, Including: sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55
; Gross weight [kg]: 3860; Engine: Volvo TAD1343GE-B; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 515
It is made for heat treatment of steel (originally 100Cr6 steel). Possible customers : automotive suppliers The last heat treatment on this line was made in 2018. For a better industrial usage, the supervision of the line need to be upgraded. The original constructor is FDI (Deleau Furnace), which was bought by ATI Furnace ati furnace nabertherm Forge from 60 to 400 Ton Forging and Annealing Furnace
It is made for heat treatment of steel (originally 100Cr6 steel). Possible customers : automotive suppliers The last heat treatment on this line was made in 2018. For a better industrial usage, the supervision of the line need to be upgraded. The original constructor is FDI (Deleau Furnace), which was bought by ATI Furnace ati furnace nabertherm
Wheel diameter: 400 mm Cutting height: 200 mm cutting width: 350 mm Motor output: 1,5 kW Table dimensions: 400 x 500 mm Table tiltable: 45 Grad saw band length: 2950 mm machine weight ab.: 150 kg Dimensions (L/W/H): 700 x 600 x 1800 mm wood band saw Thanks to the heavy cast-iron table, the wood band saw offers good stability. The machine has a longitudinal guide and a miter guide and is supplied with a saw band. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SUMAB R 400 Für Blöcke, Bordsteine, Pflastersteine Produktionsfläche: 1100x500mm Palettengröße: 1200x550 mm Maximale Produkthöhe: 330 mm Mindestprodukthöhe: 40 mm Produktionskapazität in 8 Stunden / 100 %: Hohlblock: 6.912 Stück (20x20x40 cm) Pflasterstein: 550-640 m2 (10x20x6 cm) SUMAB R 400 For blocks, curbstones, pavers Production area: 1100x500mm Pallet size: 1200x550 mm Maximum product height: 330 mm Minimum product height: 40 mm Production capacity in 8h / 100%: Hollow block: 6,912 pieces (20x20x40 cm) Paving stone: 550-640 m2 (10x20x6 cm)
Key data: 30 , 13 , 206
Compresseur WORTHINGTON CREYSSENSAC type Rollair 4000 Compresseur à entrainement direct en bon état
maximum number of results exceeded
please refine your search
