sm 52 2 used for sale

consisting of: 12-head rinser 12-head long-tube beer filler 4-head crown corker capacity: 2200 bph

Tables for hydrsulic press for clamping on the stump or for the edition on the table. Multiple available. The tables are from a 420to press with installation height 1,250mm The round tables have a continuous opening in the middle. More data and photos on request

Strapping machine SMB SM1-600; good condition; cleaned and tested; Frame size 600x600mm; Bandwidth 5mm; Core diameter 200mm; Power max.42 Strappings/min.; suitable for PP-band 5mm DIN 55535; Stand-up device; Footswitch. Strapping machine SMB SM1-600; good condition; cleaned and checked; frame size 600x600mm; band width 5mm; core diameter 200mm; speed up to 42 straps/min.; used for PP-band DIN55535; floor mounted machine; foot switch.

-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg

Qty. 1 Second-hand strip casting production line Mfc.: EMA-Indutec, Marx, Air Blue, Güntner, Demag, G. Buchholz Built: 1992, 1995, 1997, 1999, 2000 Income material: Scrap Strip width: 300 mm Thickness: 10 – 20 mm – can be reduced! Plate length: 16 m can be extended! Coil weight: 1.5 T (steel) Scope of supply: Induction crucible furnace 20 kV Transfomer Cooling unit Casting machine Duo Mill Stand Coiler Run-out table Quenching Compressor

The extrusion line was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film
 - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Roll width: 2500 mm Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system  ...

SMG DS 315-1500/1300 CNC hydraulic press was manufactured in 1984 in Germany. The machine, consisting of two interconnected stations, is used for pressing metal workpieces in manual, semi-automatic and automatic mode with a pressing force of up to 315 tonnes. All the machine’s machining parameters are set using a CNC control with a full-colour, touchscreen display. The press is equipped with a hydraulic and pneumatic sheet metal feeder, servo drives for feed rollers to set a very precise stroke of up to 0.1 mm, safety cages and workpiece feed and drop control sensors. The SMG 315 T machine underwent a complete overhaul in 2007, during which components such as pumps and safety installations were replaced. Technical data of the SMG DS 315-1500/1300 press - maximum press force: 315 t - working table dimensions (L x W): 1500 x 1300 mm - upper machine point (from the table): 750 mm ...

Shrinkwrapper capacity: approx 60 packs / min (single-lane) Presently equipped for handling of the following formats: 0,33l cans – 0,5l cans 3 x 4 = 12 cans shrinked in foil (printed), without pad 6 x 4 = 24 cans shrinked in foil (printed), without pad

Shrinkwrapper capacity: approx 120 packs / min (double lane) Presently equipped for handling of the following formats: 0,33l – 0,5l cans 3 x 4 = 12 cans on pad, shrinked in foil (printed) 6 x 4 = 24 cans on pad, shrinked in foil (printed)

Qty. 1 Second-hand slab manipulator Mfc.: SMM Built: 2009 Slab dimensions: Length: 2000-3200 mm Width: 720 – 1450 mm Thickness: 320 – 406 mm Drive power: 55 kW, 400 V

Accuracy: 0.7 mm Application: Production and montagelinins, quality control Location: Rüsselsheim The measurement is based on the analysis of surface curvature. The deformation is detected by the detector built into the scanning head. During the measurement, the image of the detector is converted into a point cloud using the control software. Each of the points describes the geometry using X, Y, Z coordinates. The system then enables personalized analysis and reporting. The scanners can also be purchased individually. Visit by appointment. Disassembly, transport and commissioning by specialist company optionally possible.

Qty. 1 Second-hand blower and PET filling line Mfc.: SMI, SARCMI, KOSME, EC-JET, SIMONAZZI, ZAMBELLI, PROCOMAC, ACMI, ATLAS, SIAD, ASKI, SIDEL Built: 1976 – 2012 Plastic Cap Product: Still & sparkling water Capacity: 12 000 bottles/hour Scope of supply: Blower machines Filler Labeller Conveyors Shrinkwrapper Palletiser Compressors Chiller Dryer

Thank you for your interest in our used machines, which we can offer you as follows: Manufacturer: SME Group Model: FM 5540 shrink wrapping machine Built: 2010, hardly used Max Package Dimensions: 450x330x150mm Machinery Dimensions: 1685x828x1480mm Max welding dimensions 550x450x120mm Weight: 125kg Electrics: 1pH 110V/220V 50/60Hz, 2.5kw Foil: PVC, PP and POF We offer this machine " in existing condition " for sale, excluding any warranty/defect claims or assurances. from the hess. Lichtenau; Unpacked

Smalcalda knife head with inserts, used    Type: FEPN 250-22 Manufacturer/make: Smalcalda Diameter: 250 mm Through hole: 50 mm Slot width: 12 mm Insert slots: 12

Flat cutter knife head with inserts, used   Type: FEPN 315-22 Manufacturer/make: Smalcalda Diameter: 315 mm Through hole: 50 mm with SK 50 Insert places: 14

Flat cutter knife head with inserts, used   Type: FEPN 400-22 Manufacturer/make: Smalcalda Diameter: 400 mm Through hole: 50 mm with SK 50 Insert places: 16

4 col gearless flexoprinting machine to print foil and paper with waterbased color or UV color. The Machine can be further used to coat foil or paper. Working width 1.4 m Diameter Mono un - and rewinder = 1000 mm Speed = 350 m/min.

Pneumatic riener for ship rivets Comes with the following accessories, 1 x impact bolt for round head 16 mm 1 x impact bolt for round head 22 mm

Pneumatic riener for ship rivets Comes with the following accessories, 1 x impact bolt for round head 20 mm 1 x impact bolt for round head 22 mm 1 x impact bolt for round head 25 mm Description M22 Weight Weight 9.2 Length mm Length mm 475 Risense size Risense size M22 Cill diameter mm rinie size 22 Impact energy Hz. Impact energy Hz. 20 Air Consumption L / sec. Air Consumption L / sec. 20 Stroke frequency J. J. Stroke frequency J. J. 35 Working pressure Mpa working pressure Mpa 0.63 Inner tube diameter mm inner diameter mm hose 16

N° 0214: 1 gebr. Hydraulic quick-stroke two-stand press Fabr. SMG, Type DS 63, Bauj. 1984 with pressing force 630 kN, retraction force 51 kN Arb.-Ber.: Table area 660 x 460 mm, drive power: 15 kW Accessories: The press was upgraded to UVV 11.064 VBG 7n5.2 in 1991. Other: Light width between the stands 680 mm, max. distance between table top and pestle 385 mm, ejector force 15 kN largest pestle stroke 150 mm.

Rated press force 400 kN Impact stroke 8-95 mm Stroke stroke number 70/142 /min Impact adjustment 60 mm Table area 660x530 mm Impact surface 400x250 mm Recording 3-4 kW Compressed air operating pressure 0.6 Mpa

turning diameter: 720 mm turning length: 2250 mm control: CNCN 300 turning diameter over bed slide: 480 mm 3-jaw-chuck diameter: 650 mm total power requirement: 44 kW weight of the machine ca.: t dimensions of the machine ca.: m Voltage 380VHertz 503-jaw chuck ø (mm) 650 Including: Turret, 9 positionChip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 720 mm turning length: 2250 mm control: CNCN 300 turning diameter over bed slide: 480 mm 3-jaw-chuck diameter: 650 mm total power requirement: 44 kW weight of the machine ca.: t dimensions of the machine ca.: m Voltage 380VHertz 503-jaw chuck ø (mm) 650 Including: Turret, 9 positionChip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 t distance between columns: 580 mm stroke: 150 mm dayligth: 370 mm table surface area: 560x400 mm ram surface: 400x350 mm hole in the table: 80 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: 1500x500x2500 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: unbkt. mm table load: unbkt. t table height: unbtk. mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): x mm bore capacity in steel (diameter): x mm throat: x mm throat: x mm bore stroke: x mm bore stroke: x mm POLYHEDRAL DRILLING MACHINE Drilling range: -Square: Spanner opening 3-27mm -Hexagon: Spanner opening 3-32mm Drilling depth: -Square -14mm -Hexagon-13mm Throath150mm Misc accessories More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 t distance between columns: 1650 mm stroke: 900 mm table-size: 1600 x 1000 mm total power requirement: 65 kW weight of the machine ca.: 31 t dimensions of the machine ca.: 3 x 2 x 5 m Cushion in table. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t throat: 400 mm stroke: 20 - 160 mm table surface area: 1200 x 800 mm ram adjustment: 100 mm no. of strokes: 60 Hub/min ram surface: 860 x 520 mm total power requirement: 15 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 1,7 x 2,5 x 3,23 m The machine should b partially overhauled new painting new seals The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t throat: - mm stroke: 8 - 90 mm table size: 630 x 430 mm ram adjustment: 60 mm no. of strokes: max. 65 Hub/min total power requirement: kW weight of the machine ca.: 2480 kg dimensions of the machine ca.: m - tiltable - table mounting plate - mechan. Overload protection in plunger (break plate) - pneum. clutch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Good condition and compact packaging machine

Capacity: 1000 tons Stroke: 140 mm Table plate size: 910x920 mm Ram adjustment: 15 mm Main motor power: 28 kw Total power: 30 kW Dimensions (length x width x height): 2100x2500x4700 mm Height above floor: 3800 mm Total weight: 31000 kg

handle applicator Smipack type: HA80SX Maximum output up to: 80 ppm Working board height: 650-810 mm

Material thickness: 0 mm Throat: 7000 mm

Capacity: 630 t Folding length: 6200 mm CNC Brand: Cybelec CNC Model: Modeva 12 S Make SMD 630 Ton Type PBH 630 - 6200 Year 2011 Cybelec MODEVA 12S Capacity (metric tons) Force = 630 Ton Folding length (mm)L = 6.200 Down stroke or Up strokeB = 5.200 Tandem type Y1/Y2/X/X1/R/Z1/Z2/V Hydraulic top clampWeight 75.000 Kg New Euro 300.000  

blowing machine SMI SR 14 • Year: 2004 • Speed: 20.000 bph • 14 cavites. • Bottles formats: • 0.5Lt – 1.5Lt – 2Lt • Stamp included. • Safety protections.

Pneumatic Press Fabr. SMC Cylinder Type CDS 1 WFN 160-150-A51Built in 1987Pressing force: 150 kg = 9.9 kgf / cm²Stroke: 160 mmRam diameter: 50 mmDistance between the side uprights: 360 mmProjection: 150 mmInstallation height: 280 mmOutside dimensions approx: 450 x 350 x 800 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

SMT Lathe 80001350 The machine was designed and manufactured to produce rotor shafts for power tools. The machine is designed and manufactured to perform the following operations automatically. - Load/unload parts automatically from/to tool carrier line with a pick-up & placement unit between the shaft ends. - Rotate ring seat + flat rotate commutator + rotate commutator. - Ring mounting - Commutator side - Ring mounting - Drive wheel side The machine has several production programs to produce different parts. Each program uniquely corresponds to a wave type Specifications Anchor wavelength from up to 92.5 - 163.1 mm Bearing pin diameter commutator side 8; 10; 12.5 mm Drive side 12; 8 mm Min. Available length bearing position 3.6 mm Package diameter 52; 55; 59 mm Ring dimensions Outer diameter 40 - 57.4 mm Inner diameter 37.4 - 56 mm Ring width 4 - 8 mm R ...

Can filling line 30.000 cans/h for 0,5l - Depalletizer Transpak yera 2006 - Can rinser Trntech Hysek year 1998 - Flash Pasteurizer Arsopi year 2006, 150 hl - Buffer Tank Arsopi year 2006 - Monoblok Krones year 1997 - Can lid magazine - Seamer Ferrum year 1997 - Filling level inspector Krones 2 pcs. year 1997 - Can rotator 2 pcs. - Heater Krones year 1998 - Can dryer 2pcs. year 2013 - Trayer SMI LSK30T year 2005 - Multipack Kisters year 1993 - Code printer Videojet - Divider - Palletizer H&K-KHS year 1991 - Pallet magazine Kettner year 1981 - Pallet wrapper Haloila year 2006 - Pallet label aplicator Interex year 2017 - Conveyors

Nominal force 400 kN Stroke rate - 70/140 / min Motor 3/4 kW Exploitable stroke - at constant. Clutch brake temperature 50/45/min Capacity - material thickness 4-6.4 m - with single strokes, 2-3.2 mm - with continuous stroke Table 660 x 530 mm, table top 650 x 515 x 75 mm Stroke adjustment - 10-125 mm, Dimensions 1250 x 1600 x 2370 mm - High , Btto 4500 kg Reconditioned machine - warranty 9 months from delivery date

pack 2 packs, packs of 4, 6 packs

Cardboard sleeve packer SMURFIT mod. CECPAK J 100 Year: 2006 Speed: 30 PPM Interlocking closure system Suitable for forming clusters for bottles with inside and outside necks Machine equipped for 250 ml bottles, size 2 X 2 Safety protections.

Hydraulic self-centering bezel, Luenette, Lynette SMW AUTOBLOK Hydraulic bezel with hydrostatic bearing Suitable for GILDEMEISTER / MAX MÜLLER Lathe MD 5 Type: SLK 8-70 N Clamping range: 8 to 70 mm Operating pressure: approx. 60 bar Bezel base: 245 x 240 mm Type: fixed - 3 pieces roller bearing 35 mm- roll width 18 mm - hydraulically self-centering Dimensions L x W x H: 350 x 250 x 550 mm Net weight: 65 kg good condition; used

Capacity: 700 t Table length: 5000 mm Table width: 5000 mm Stroke: 2000 mm CNC Brand: Siemens CNC Model: Siemens Simatic Playback Max. product5000 Ø Max. plaatdikte28 mm Max. bordel radius700 mm Min. product Ø800 Min.plaatdikte4 mm Min. bordel radius35 mm Werksnelheid190000 mm/min. Vermogen kW140 kW

Capacity: 50 t Table length: 2200 mm Table width: 2200 mm Stroke: 800 mm Max. product2200 Ø Max. plaatdikte10 mm Max. bordel radius150 mm Min. product Ø800 Min.plaatdikte3 mm Min. bordel radius25 mm  CNC Controll MIPC Q Playback with GAP control Large package TOP rolls 5 units  Large package forming & pressure rolls 5 units Loading attachment Unloading attachment Under power out put 6 units Controllable forming roll drive Hydraulic displacement drive Clamping device without hole Basket bottem Knocker bottom Pressure vessel bottom Boiler bottoms Flat floor Plate base diffuser bottom Tank bottom Tank bottom Radar reflectors Engine parts Dispense air Silo hoppers Cooker hoods Container parts Hemispheres

1 of used multi-packer, make SMI, type MP 300 RD, new 2002. Capacity upto 300 cycles/minute. Used for PET bottles dia. 66-73 mm x height 179-230 mm, as 2x2=4 and 2x3=6 bottles per sleeve. Future formats (not commissioned) 2x4=8 and 1x3=3. With Roto-Divider.

Semi-automatic angle welding machine type FP870A Specifications: Welding frame size: 870 x 620 mm passage height: 300 mm film width: 800 mm film roll diameter: 300 mm Automatic welding frame closure Suitable for polyolefins and LDPE films Power up to 900 cycles/hour; depending on machine equipment, product and film. With foot pedal Power supply: 230 V heating capacity: 3.1 kW The machine is still in the original box from the manufacturer. Delivery ex works without installation and commissioning, but can be organized for an extra charge.