sm 102 4 used for sale

Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: with support ribs -Length: 4480mm -Width: 2490mm -Height: 280mm -Plate thickness: 15 mm -Plate: with support ribs -Transport dimensions: 4530/2530/H280 mm -Weight: 4400 kg

Siemens Simodrive 6SC6512-4AA02-Z Frequency Inverter

Heat exchanger, heat exchanger, rotary heat exchanger, exhaust air heat exchanger Heat exchanger: air/air -Manufacturer: Klingenburg, rotary heat exchanger type RRSE 4066/2750 -Rotor: Diameter: 2570 mm -Speed: 8 rpm -Dimensions: 4066/2750/H460 mm -Weight: 850kg

Fan filter, fan row, air cooler, control cabinet fan, filter fan -Manufacturer: Schroff / Papst, fan assembly type 60700-018 with 3 axial fans -Axial fan: Papst Type 4850 N -Voltage: 220 V / 9 W -Dimensions: 480/180/H40 mm -Weight: 2.7 kg

Safety relay, safety control, emergency stop switch, switching device, safety sensor, safety switching device, evaluation device -Manufacturer: pilz, safety relay safety switching device -Type: PNOZ 1 24VDC 3S10 -Id.no.:475695 117758 -Number: 1x relay available -Dimensions: 110/90/H80 mm -Weight: 0.4kg

Kartenkleber für Sammelhefter - Card Gluer for Saddle Stitcher Mueller Martini 315 Type C 422 Year 1996 - Serial-No. 99.12964 C 422 Robatech Gluning unit - 1 gluing noise Card Gluer for Saddle Stitcher Mueller Martini 300-321-335 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply -Manufacturer: Block, AC/DC Power Supply -Type: GLC 400/24-3 -Quantity: 1x module available -Dimensions: 140/75/H90 mm -Weight: 2.3 kg

tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK50 holder -Shaft: Ø 16 x 400 mm -Dimensions: Ø 97 x 570 mm -Weight: 3.9 kg

Three Knife Trimmer With In-Feed, Magazine, Cutting Device, Delivery Belt Year of Construction: ca. 1990

energy chain, cable drag chain, energy guiding chain, cable chain, drag chain -Manufacturer: IGUS, energy chain cable drag chain 2 pieces -Length: 4250 mm -Width: 240 mm -Bending radius: 160 mm -Accessories: incl. clamps see photos -Transport dimensions: 920/890/H480 mm -Weight: 43 kg

three-jaw chuck, three-jaw lathe chuck -Manufacturer: Bergmans, three-jaw chuck type 4110 chuck size Ø 255 mm -Passage: Ø 65 mm -Bolt circle: Ø 140 mm / M12 -Dimensions: Ø 255 x 140 mm -Weight: 31 kg

Winch rope, crane rope, hoist rope, wire rope, stainless steel rope -Stainless steel cable: Crane cable Ø 4 mm type 7x19-4MM -Length: 500 m -Standard: AISI 316 -Price: complete -other crane ropes also available -Transport dimensions: Ø 300 x 270 mm -Weight: 34.4 kg

Kuvertiermaschine / Inserting machine Fracotyp-Postalia FPi4530 Serial-No. 10EY5510 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Universa 400 Standard Bj 2004 Compact 450 SO Bj 2005 MGZ 400 Hand Feeder Bj 2004 Immediately available from stock

steel ruler -Manufacturer: Hoffmann, precision steel ruler, stainless steel, length 2000 mm -Art.No.: 461400 2000 -Dimension 2040/30/1 mm -Weight: 0.5 kg

crane block, crane hook, load hook, single hook -Crane hook: load hook with holder -Load capacity: kg -Dimensions: see photos -Dimensions: 490/160/H1090 mm -Own weight: 81 kg

Heidelberg-SM52-PM52-Pliers Gripper-MV.031.491.08 Blower G3G125 – EBM – Original – HDD – Spare Part – New Part Number: HDD – L2.179.1501 for Heidelberg printing presses This part is also suitable for the following types of machines: CD 102 / CX 102, CS 92, Primefire 106, SM 102 / SX 102, SM 52 / SX 52 / PM 52 XL 105 / XL 106 L 145 / XL 162 – Installation locations – Positions: Appendix – Display – Twist - Price on request

Block size press Müro 4x5000/A2 WT; cleaned and tested; 3x dryer; insertion width 700mm; Insertion height 525mm. Padding press Müro 4x5000/A2 WT; cleaned and checked; three heaters; working width 700mm; working hight 525mm.

CTP-Mitsubishi - DPX 460 – Platesetter with Rip-Mate PC Year of construction: approx. 2007 incl. software and accessories incl. roll films in their original packaging For the production of ready-to-print die-cut polyester printing plates Mitsubishi SILVER DIGIPLATE Suitable for the following printing presses: For Heidelberg QM 46, GTO 46, GTO 52 For Ryobi 5xx For Roland Edelmann Practica 400x510mm For Heidelberg Speedmaster SM 52 – PM 52 2x Supply Rolls 1x integrated register punch for PM52- SM52- Autoplate

Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Charger for forklifts: Miditron Type D 400G 48/100 PWF-PMT -Input voltage: 400 V 50 Hz -Power: 48 V/100 A -Dimensions: 555/530/H690 mm -Weight: 112 kg

V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 6-groove pulley type SPB 450 x 6 TB 4040 -V-belt width: 17 mm -Mounting: Taper bushing Ø 80 mm (can be changed) -Dimensions: Ø 455 x 120 mm -Weight: 42 kg

roll diameter: 400 mm roll length: 1000 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch total power requirement: 45 kW Condition: used, overhauled Specification: Rolling mill 400 x 1000 mm - second-hand monobloc model, motor under the rollers - roller diameter: 400 mm - roll length: 1000 mm - Rolls: with core bore, with central chamber for water cooling - Fixed friction between the rollers - Rollers mounted on bronze bushes with circulating oil lubrication via pump, - equipped with new Johnson-Fluiten slewing rings, for connection to the water circuit - Gap adjustment: hydraulic, NEW - Hydraulic unit: NEW - Manually tiltable steel guide plates with mechanical safety lock with mechanical safety interlock - Stainless steel roller container for holding the mixture - bi-directional safety belly bars - Safety brake for NOT stop - ...

roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not driven -Roll width: 480 mm -Rollers: Ø 80 mm -Roll spacing: 200 mm -Dimensions: 1920/520/H150 mm -Weight: 50 kg

Key data: 320 KW, 400 kVA

Currently we offer a: FG Wilson generator set Type: S400 Engine Scania DSC 12 Generator S-Star Power: 400 KVA / 320 KW Hz 50 150 RPM AVR Control: MX321 Year of manufacture 2001 Hours 1001 You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK40 holder 2 pieces -Type: 40 x 27 x 315mm / 40 x 27 x 400mm -Shaft: Ø 27 mm -Price/Delivery: complete -Transport dimensions: 595/130/H70 mm -Weight: 10.5 kg/total

tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK40 holder -Type: SK40 x 40 x 400 -Shaft: Ø 32 mm -Dimensions: Ø 62 x 590 mm -Weight: 8.6 kg

range L-W-H: 400x300x200 mm saw diameter: 420 mm weight of the machine ca.: 3500 kg Producer: KASTO Type: HBA 420U Year of manufacture: 1985 Dimensions (width x height x depth): approx. 400x200x300 cm At7Zcq Fully automatic NC horizontal bandsaw 1 chip conveyor, 1 external chip conveyor, 1 person. driven roller conveyor approx. 450 cm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK50 holder -Type: SK50 x 22 x 400 -Shaft: Ø 22 mm -Dimensions: 600/90/H93 mm -Weight: 5.9 kg

transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: Legrand, Transformer Transformer -Type: 42304 -Power: 160 VA -Dimensions: 150/110/140 mm -Weight: 4.6 kg

Key data: 340 KW, 425 kVA

We currently offer: Number 5 P425E generator set Engine Perkins Type: 2006-TTAG Generator S'Star Type: PR 500 H Power 425 KVA / 340 KW V 400/230 Hz 50 RPM 1500 A 613.5 IP 22 AVR Control SX440 Year of manufacture 1996 Hours: 7411 dB 100 Metrics: L: 5.40m H: 2.30m B: 1.65m Weight: approx. 7000 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

conveyor belt, belt conveyor, transport belt, belt conveyor -Conveyor belt: Conveyor belt stainless steel with mesh belt -Speed: 27 m/min -Conveyor belt width: 420 mm -Conveyor belt length: 1000 mm -Motor: DRdrives 0.18 kW see photo nameplate -Dimensions total: 1010/700/H185 mm -Weight: 36 kg

Key data: 320 KW, 400 kVA

We currently offer: Number 31 Tessari generator set Engine Iveco Alternator Iveco Power: 400 KVA / 320 KW Hz 50 RPM 1500 IP 22 AVR Control SX440 Hours: 7837 Year of construction 2002 Metrics: L: 5.30m B: 1.75m H: 2.60m You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

PLC controller, electronic module, PLC control -Manufacturer: Mitsubishi, Programmable Controller -Type: FX2N-48MR-DS FX2N-5A FX2N-2LC -Individual components: see photos -Price/Fee: complete -Dimensions: 290/85/H95 mm -Weight: 1.3 kg

Absolute encoder, encoder, rotary encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, incremental encoder -Manufacturer: Heidenhain, Incremental Encoder -Type: ROD 426.000B 9000 -Art.No.: 295 434 GK -Shaft: Ø 6 x 11 mm -Dimensions: 170/150/H60 mm -Weight: 0.4 kg

We currently offer: Number 34 Iveco generator set Generator mecc old Type: ECO40 Power: 400 KVA RPM 1500 Hz 50 IP 23 Year of manufacture 2018 Hours: 10503 Metrics: L: 3.30m B: 1.65m H: 2.15m You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

gear motor, electric motor, electric gear motor -Manufacturer: ABM Baumüller, gear motor type IIb / DLB 421 -Speed: 50 rpm -Power: 0.8 kW -Design: B3 -Shaft: Ø 35 x 80 mm -Dimensions: 475/240/H235 mm -Weight: 38 kg

Hidraulics unit Vickers Electric motor: Manufacturer: Siemens Type: 1LA7133-4AA61ZA11 8.6kW Vane Pump: Manufacturer: Parker Type: PV032R1K1JHNMMK The unit is in good condition. see pictures for more details.

Hidraulics unit Vickers Electric motor: Manufacturer: Siemens Type: 1LA7133-4AA61ZA11 8.6kW Vane Pump: Manufacturer: Parker Type: PVL32EH140C2 The unit is in good condition. see pictures for more details.

Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Conveyor belt: Conveyor belt conveyor belt unused -Width: 140 mm -Length: 4300 m -Transport dimensions: Ø 220 x 140 mm -Weight: 2.6 kg

Universal surface grinding machine of the Jung brand suitable for tooling, fixture construction, training and mould making Bssx7D8P Travel distances : 400 x 150mm Table size : 520x150mm Grinding length 400mm Grinding width 150mm Workpiece height 240mm Table size 520x200mm Connection 50Hz 380V Motor 4.5KW Machine weight approx. 2250kg Dimensions 2500x2100x1900mm

hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, traction motor, drive motor -Manufacturer: Bosch, hydraulic pump -Type: 0 510 425 307 -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Quantity: 1x pump available -Dimensions: 130/90/H120 mm -Weight: 3.4 kg

Cutter knife, cutter knife for chop chopper, chop cutter, dicer, multi-purpose cutter, slicer and portion cutter -Manufacturer: Knecht, cutter knives 4 pieces -Type: R320 5 220 428 92 -Price/Delivery: complete -Dimensions: 330/300/H80 mm -Total weight: 5.6 kg

Cutter knife, cutter knife for chop chopper, chop cutter, dicer, multi-purpose cutter, slicer and portion cutter -Manufacturer: Knecht, cutter knife 2 pieces -Type: R320 5 220 428 92 -Price/Delivery: complete -Transport dimensions: 370/230/H40 mm -Weight: 2.8 kg

saw blade diameter: 400 mm capacity 90 degrees: round: 135 mm capacity 90 degrees: square: 130 mm : 200 x 80 mm saw blade turning speeds: U/min total power requirement: kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 2,0 x 1,8 x 1,95 m Automatic circular saw with - Feed type RB 1500 - Roller conveyor 1500mm Good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade, wood saw blade, circular saw blade -Manufacturer: AKE, saw blade 904-12 -Type: Ø 400x3.5/2.8x60 Z 72 = T 18.32 -Art. No.: 0211-5107670X HW -Speed: n max. 4300 rpm -Number: 3x saw blade available -Price: per piece -Dimensions box: 490/490/H10 mm -Weight: 3.2 kg/piece

Vacuum cleaner motor, radial blower for sweeper, radial blower, fan, blower -Manufacturer: SPAL, radial fan from sweeper Hako Hamster 500 E -Type: 008-B37/C-42D -Voltage: 24 V -Connection input: Ø 70 mm -Connection output: 100 x 45 mm -Dimensions: 150/120/H145 mm -Weight: 0.7 kg

Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley -Manufacturer: Steel, crane chassis without drive -Beam width: adjustable, set to max. 130 mm -Load capacity: kg -Dimensions: see photos -Dimensions: 405/360/H350 mm -Weight: 43 kg

Technical Parameters Maximum cutting performance Round: 650mm Square 650×800mm Saw blade Speed 20~80 m/min Size 54X1.6 Guidances Tungsten carbide and bearing blade guides Cleaning Wire Brush & Flood Coolant Voltage Hydraulic Power 7.5 kW Hydraulic 2.2 kW Coolant 0.12 kW

Workspace Workpiece, weight (max.) 500 kg Table dimensions 813 mm x 406 mm Distance spindle nose - table surface 580 mm Dimensions magnetic clamping plate 800 mm x 400 mm Scale ring pitch Y-axis 0.005 mm Scale ring pitch Z-axis 0.02 mm Auto. Transverse Feed Z-Axis 0.1 mm - 8 mm Speed 1450 1/min Auto. Vertical feed 0.005 mm - 0.05 mm Travel Travel X-axis 910 mm Y-axis travel 450 mm Feed hydr. Feed X-axis 7 m/min - 23 m/min Rapid traverse Y-axis 480 mm/min Rapid traverse Z-axis 990 mm/min Drive power Motor power main drive 4 kW Dimensions and weights Grinding wheel dimensions 350 mm x 40 mm x 127 mm Dimensions (length x width x height): 3.6 m x 2.4 m x 1.9 m Weight 3400 kg

approx. 500 pieces, storage box / tray, SSI Schaefer, type MF 4060 (40 x 30 x 6cm) - used - : Price per unit ex location (net): 2,50 € We reserve the right to purchase a minimum quantity! Manufacturer: SSI Schaefer Type: MF 4060 PP Year of manufacture: unknown External dimensions L x W x H 396 x 297 x 60 mm Internal dimensions L x W x H 366 x 267 x 42 mm Usable height in stack 27 mm Capacity 4.1 litres Content load (max.) 20 kg Color: Blue Condition: good, Available: immediately Location: CZ, Bor, later camp Frankenberg / Saxony