sm 102 2 used for sale

Tires with rims, tires for lawn tractors, ride-on mowers -Tire size: 23x9.00-15 AS -Dimensions: Ø 720 mm -Weight: 22 kg

Key data: 2500 KW, 10500 V

Engine; MTU204000L64 Year of Construction 2024 Operation hours; 0 (New) Electric power; max 2500kWe Construction form; 20 cylinders in V configuration Voltage; 10.5 kV Apparent power; 2.711kVa Speed; 1.500 RPM Frequency; 50Hz Model; Containerized Fully equipped with heat coupling & CHP MTU, GAS GENERATOR, CONTAINERIZED, CHP ROLLS ROYCE

Heavy duty castors, heavy duty wheel, tire, wheel, swivel castor, -Payload: 1,000 kg -directable -Brake -Ball bearings -Tire size: 250 x 60 mm -Mounting plate: 140 x 175 mm -Total height: 305 mm -Number: 6x bikes available -Price: per piece -Weight: 10 kg/piece

Heavy duty castors, heavy duty wheels, tires -Payload: 1,000 kg -Ball bearings -Tire size: 250 x 60 mm -Mounting plate: 140 x 175 mm -Total height: 305 mm -Number: 9x wheels available -Price: per piece -Weight: 7 kg/piece

Key data: 2500 KW, 400 V

Engine; MTU204000L64 Year of Construction 2024 Operation hours; 0 (New) Electric power; max 2500kWe Construction form; 20 cylinders in V configuration Voltage; 400V Apparent power; 2.711kVa Speed; 1.500 RPM Frequency; 50Hz Model; Containerized Can be fully equipped with heat coupling & CHP MTU, GAS GENERATOR, CONTAINERIZED, CHP ROLLS ROYCE

Key data: 490 mm, 1250 , 990

Machine type: EVP-A 220 Manufacturer: ERBA Power kW: 1.5 Total volume: 250 lt. Description: The EVP-A 250 mass finishing machine from ERBA has a flat work container base with separation. It has an easily replaceable screening unit and an electrical control cabinet. Fully automatic PLC process control is optionally possible. Emptying or separation takes place via the integrated flap (manual/pneumatic). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The EVP-A 550 can be linked to other machines due to its lateral discharge. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The  ...

Müro A3/2000 WT block size press; good condition; cleaned and tested; 2 hot air dryers; Working width 525mm; Insertion height 200mm. Padding press Müro A3/2000 WT; good condition; cleaned and checked; two dryers; working width 525mm; working hight 200mm.

Key data: 490 mm, 1250 , 990

Machine type: EVP-RA 200 Manufacturer: ERBA Power kW: 1.5 Total volume: 230 lt. The EVP-RA 200 vibratory finishing machine from ERBA has a rising work container base with separation. It has an easily replaceable screening unit and an electrical control cabinet. A fully automatic PLC process control is optionally possible. The machine is characterized by high work efficiency by means of an integrated drop stage. Emptying or separation takes place via the integrated flap (manual/pneumatic). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely adjusted by means of a frequency converter. The EVP-RA 200 can be linked to other machines due to its lateral discharge. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories ...

Kannegiesser inclined belt conveyor Hopper Filling Funnel GF 2750-470-380 RA1311 This belt conveyor is from the year 2015 and is in good (used) condition. Additionally this conveyor is equipped with a height adjustment and can therefore also be used as an inclined conveyor. Due to the 2-layer PVC belt, the transported goods can be transported at a height of 260 mm up to a height of 750 mm. Due to a constant conveying speed of 0.3 m/s you benefit from a continuous material flow in your intralogistics. Technical data: Conveying length (NL): 2750 mm Framework width (NB): approx. 470 mm belt width (GuB): 380 mm Height / Belt run (BH): from 260 mm to 750 mm rising +/- 50 mm height adjustment Number of support feet: 2 pieces, movable on fixed rollers Load (kg/rm): 30 kg Conveying speed (v m/s): 0.3 m/s constant Drive: TM 113i drum motor Electrical data: 400 V / 50 Hz / 0.3 kW Deflection drum ...

Key data: 415 mm, 1290 , 980

Machine type: EVK 200 Manufacturer: ERBA Heating element kW: 1.5 Total volume: 200 lt. Description: With the ERBA Granulate Dryer EVK 200, workpieces can be easily separated from the granulate with the integrated screening device. It has excellent drying ability, a direct heating system and digital temperature control. The working tank is completely sprayed with polyurethane on the inside. The EVK 200 can be linked to other machines. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. The European Commission provides a platform for out-of-court online ...

Clamping plate with T slots, plate field, welding table, welding table, plate boring machine -Width: 2005 mm -Length: 2000 mm -Height: 210 mm -Plate thickness: 120 mm -Plate: with support ribs -Groove width: 28 mm -Dimensions: 2000/2005/H210 mm -Weight: 2700 kg

roller conveyor, conveyor track, roller conveyor belt, roller track -Roll width: 2000 mm -Conveyor length: 5000 mm -Roller drive: via conveyor chain

Profile steel shear, profile shear, punch, punching machine, hole punch -Pressure force: 40 tons -Punching -scissors -cut -disengage -mechanical release -Foot switch: 1 -various stamps and dies -Dimensions: 800/1250/H1800 mm -Weight: 1112 kg

Threaded rod, threaded bolt, threaded rods according to DIN 975 -Diameter: M24 -Threaded rod: galvanized -Quality: 4.8 -185 pieces, length: 2000 mm, price per piece: 15 EUR net -19 pieces, length: 3000 mm, price per piece: 20 EUR net

Absolute encoder, incremental encoder with solid shaft -Manufacturer: Lenord Bauer -Type: GEL 260-VN00500A000 -Dimensions: 90/90/H120 mm -Weight: 0.62 kg

Connected load 380V 16A Pneumatic connection 6bar Total length of the machine 4300 mm Total width of the machine 1300 mm Highest press length 2650 mm Press width 1000 mm Press height 1000 mm Press pressure up to 150 bar Electric width adjustment with digital display Foot switch for pressing

pressure: 200 t throat: 450 mm stroke: 30 - 140 mm table surface area: 1100 x 850 mm dayligth: 500 mm ram surface: 800 x 600 mm ram adjustment: 110 mm tool hole in ram: Durchm. 65 x Tiefe 105 mm no. of strokes: 45 Hub/min total power requirement: 15 kW weight of the machine ca.: 14,2 t dimensions of machine L x W x H: 3,18 x 2,09 x 3,05 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Conversion processor, control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2083027407 -Type: 2083027407 -Number: 10x control cards available -Price: per piece -Dimensions: 30/195/H265 mm -Weight: 0.37 kg

Control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2083015407 -Type: 2083015407 -Number: 11x control cards available -Price: per piece -Dimensions: 20/195/H265 mm -Weight: 0.31 kg

Vernier caliper, caliper, caliper -Measuring range: 0-250 mm -for: internal measurements -Number: 1x caliper available -Price: per piece -Weight: 0.75 kg

USED TETRA PAK A1 TFA 500ML FINO FILLING MACHINE FOR SALE YEAR 2018 Item #: Usm-200 Category Tetra Pak A1 A1-1000 TFA 500ml Filling Machines, Year: 2018, Working Hours only 3422, Speed 9800 Packs Per Hour, Step 1000. The filling machine still on production.

Continuous melt filter The Berlyn Corporation, today: Berlyn ECM S/N 109F160

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Power: 3.12 kVA -Input: 3x 208-240V 12.0A OR 1x220-240V -Output: 3x 0-220 V -Output frequency: 500 Hz -Number: 1x converter available -Dimensions: 110/250/H180 mm -Weight: 2.2 kg

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, alignment plate -Width: 2245 mm -Length: 2500 mm -Height: 780 mm -Plate thickness: 25 mm -with: supporting ribs -Weight: 2720 kg

T-slot plate, measuring plate, measuring table, clamping plate with T-slots, plate field, welding table, welding table -Dimensions: 250/1450/H170 mm -Sheet thickness: 28 mm -Plate is: with supporting ribs -1x T-slot: 12 mm -1x: Longitudinal groove -Weight: 156 kg

USED TETRA PAK TBA 19 200ML SLIM 20V COMPLETE FILLING LINE FOR SALE YEAR 2006 Item #: Usm-202 Category Tetra Pak TBA 19 TBA 19 200ML SLIM COMPLETE FILLING LINE Filling machine TBA/19 TBA 200 Slim, Version 20V, Year 2006, Working hours 29000 Straw Applicator Tetra Straw Applicator 21 Cardboard packer TCBP 70 Automatic palletisation unit Conveyors & Paper trolly

Clamping plate with T-slots Plate field Welding table Welding table Plate boring machine -Width: 795 mm -Length: 2800 mm -Height: mm -Plate thickness: 35 mm -Working height: 960 mm -Plate with: support ribs -Groove width: 22 mm -Dimensions: 860/2870/H960 mm -Weight: 1470 kg

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor -Max. speed: 1500 rpm -Shaft: Ø 35 mm -Number: 1x motor available -Dimensions: 540/200/H250 mm -Weight: 50 kg

USED TETRA PAK TPA 19 200ML PRISMA COMPLETE FILLING LINE FOR SALE YEAR 2002 Item #: Usm-203 Category Tetra Pak TBA 19 USED TETRA PAK TPA 19 200ML PRISMA FILLING LINE FOR SALE TPA 19 200ml Prisma Square, Version 10V, Working hours 23000 Straw Applicator Tetra Straw Applicator 21 Cardboardpacker TCBP 70 Automatic palletisation unit Conveyors & Paper Trolly Condition: Still on production.

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Manufacturer: LEUCO -Type: Ø 212x40x60 20° -Outer: Ø 212 mm -Angle: 20° -Socket: Ø 60 mm -Hole circle: 100 mm -Number: 2x milling cutters available -Price: per piece -Weight: 8 kg

Transmitter -Manufacturer: Endress Hauser -Type: FTC 282 -Number: 2x devices available -Price: per piece -Dimensions: 60/170/H135 mm -Weight: 1.1 kg

Converters, converters, converters, drive converters, controllers -Type: Movitron 235 -Input: 380-415V -Output -Number: 1x available -Price: per piece -Dimensions: 155/350/H175 mm -Weight: 4.6 kg

USED TETRA PAK A3 COMPACT FLEX 250ML BASE FILLING LINE FOR SALE Item #: Usm-205 Category Tetra Pak A3 CF/Flex A3 Compact Flex 250ml Base Filling Machine, version 200v, working hours 2300, Year 2011 Straw applicator TSA 30, Year 2011 Conveyors and Paper trolly The current pack size on machine is 250ml Base and it can be change to 200ML and 330ml both kits available with machine. The spare parts lot also available. Condition: Tetra Pak maintained and still on production

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Power: 0.9 kVA -Input: 3x 208-240V 12.0A OR 1x220-240V -Output: 3x 0-220 V -Output frequency: 500 Hz -Number: 1x converter available -Dimensions: 110/250/H180 mm -Weight: 1.9 kg

USED TETRA PAK TBA 19 200ML SLIM 20v FILLING LINE FOR SALE Item #: Usm-209 Category Tetra Pak TBA 19 1-Used Tetra Pak TBA 19 200ML Slim 20v Filling Machine, Year of manufacturing 2004, speed 7500 packs per hour 2-Straw applicator tsa 21, 3-Conveyors and Paper trolly

Transnorm conveyor belt GF 29750-900-800 RA2215 Technical data: Conveyor length (NL): 29750 mm frame width (NB): 900 mm, 1000 mm with motor belt width (GuB): 800 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, SA47/T DT80 N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2001 condition: good (used) Conveying length in mm: 29750 Nominal / outside width in mm: 900 Belt width in mm: 800 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor sp ...

Frequency converter, frequency converter, drive inverter, controller, variable speed drive -Power: 16 A -Input: 220V -Output: 3x 0-220 V -Output frequency: 0-100Hz -Quantity: 1 piece available -Dimensions: 300/270/H110 mm -Weight: 4.2kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Power: 16 A -Input: 220 V -Output: 3x 0-220 V -Output frequency: 0-100 Hz -Number: 1x converter available -Dimensions: 300/230/H110 mm -Weight: 3.6 kg

Automatic ingredient dosing and weighing with recipe computer Suitable for dusty, crushed, crystalline, granular products such as salt, sugar, baking aids, spices Dimensions: Length: 3760 mm Width: 750 mm Height: 1880 mm 14 containers with a volume of up to 60 litres Stainless steel Discharge type:Vibro-discharge apparatus 0.085 kW Discharge via: Weighing conveyor belt Dosing accuracy: 10 to 15 grams Dosage quantity/component: up to 10 litres Total dosage: up to 20 litres Discharge capacity: 2 - 10 kg/min (depending on the material)

Servo Amplifier Module -Manufacturer: FANUC -Type: A05B-2400-C060 -Number: 1x converter available -Dimensions: 380/120/H190 mm -Weight: 2 kg

Mazak VTC 200 B moving column machining center ::TECHNICAL SPECIFICATIONS::: CNC Model: Mazatrol - CNC Version: Fusion 640M - Tool Mount: ISO 40 - Spindle Power: 18.5Kw Number of spindle speeds: 12000 - Number of tools: 24 - X-axis travel: 1120mm - Y-axis travel: 510mm - Z-axis travel: 510mm Table dimensions: 1460 x 510mm Guides: roller CNC divider: yes Rotation: Continuous High refrigerant pressure: yes Chip conveyor: belt Presetting: yes :::D DIMENSIONS AND WEIGHT::: Length: 3312mm Width: 2850mm Height: 2651mm Weight: 6100Kg

ZINSER 2425-I plasma cutting machine was built in 2013 in Germany by ZINSER GmbH. The machine, which is designed for precision cutting, marking and bevel cutting of tubes and sheet metal, has AC servo drives with precision planetary gears that guarantee excellent handling characteristics at high speeds and rapid direction changes. For the machining process, plasma or oxy-fuel torches are used, which move along the large work table on two linear guides. A sturdy portal structure with an efficient filtration system further eliminates any contamination, leaving the work area safe and comfortable. All this is complemented by a state-of-the-art CNC control with touchscreen. The ZINSER 2425 plasma cutting machine weighs 1325 kg. Technical parameters of the ZINSER 2425-I plasma cutting machine - CNC controller: ZINSER CNC 5010 - input power: 4000 W - maximum workpiece thickness: 200 mm - ...

Key data: 20000 kN, 135 mm

Dosing 1: Plasticizing 1: Screw diameter mm 135 Screw diameter mm 120 | 135 | 150 Dosing Stroke Screw stroke mm 610 Maximum injection capacity cm3 6899 | 8731 | 10780 Screw speed min-1 125 Worm torque Screw torque Nm 14000 Maximum screw speed reduced torque min-1 135 Reduced torque maximum screw speed Nm 12963 Reduced screw speed maximum screw torque min-1 112 Maximum screw torque reduced screw speed Nm 15630 Plasticizing performance (3-zone) 1.2 Recovery rate (3-zone screw) 1.2 g/s 165 | 222.9 | 231,3 Plasticizing performance (barrier) 3 Recovery rate (barrier screw) 3 g/s 208.3 | 279.2 | 264,6 1) Values for polystyrene up to injection unit 2550 according to ETR 10100 1) Data for GPPS up to injection unit 2550 acc. ETR 10100 2) Values for HDPE from injection unit 3550 according to ETR 10100 2) Data for HDPE from injection unit 3550 onward acc. ETR 10100 3) Values for HDP ...

- For vertical shooting - Load capacity - 250 kg - Suction plate diameter 2 x 300 mm

Used BT ANT / Stacker Trucks Overall good condition Year 2017 Battery about 70% Manufacturer: BT / Toyota Type SPE200D Type of electric stacker truck Drive type: Electric Load capacity 2,000 kg PYLON DATA Mast Type Duplex with Free Lift Lifting height 2,500 mm Overall height 1,785 mm Free stroke 1,350 mm Fork length 1,200 mm

Clamping angle, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Material: Steel -Dimensions: 245/202/H130 mm -Wall thickness: mm -Weight: 28 kg

Lump crusher BÜHLER MBP 2015 in good condition 4 kw with 119 rpm Belt drive ø235 : 460, n= 61 rpm, cleaned, tested, test run carried out in our specialist workshop mounted on steel frame

RACING Longitudinal travel of the X-axis mast 16,000mm Vertical travel of the Y-axis head 3,000mm Z-axis head transverse travel 1,250mm Cross stroke boring spindle W axis 700mm HEAD DIMENSIONS 410 X 505mm MANDREL Boring spindle diameter 140mm ISO 50 spindle attachment Spindle rotation speed: 5 – 3,000rpm ADVANCES Continuous working axes X, Y, W, Z 0.5 – 6,000mm/min Fast X, Y, Z axes 18,000 mm/min Rapid W axis 10,000mm/min Working thrust 2,000kg ENGINE POWER: Spindle motor in continuous service (S1%) (AC) 42 Kw Axis feed motors (AC) 50 Nm Auxiliary engines 4.5 Kw Machine in excellent condition.

height: 820 mm work height max.: ca. 2250 mm weight: 2,6 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 400 mm, 1000 mm

Pinacho Mustang 200 - CNC lathe - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-cavity tool turret - Year of construction 2001 Specifications Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm - Bed width: 300 mm Headstock: - Bore main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: MK5 - Spindle speeds: 2 - Constant cutting speed: 0-750 / 750-3000 rpm Feeds: - Working thrust Z/X: 0 - 7000 mm/min - Rapid traverses Z/X: 10 m/min Tailstock: - Tailstock Ø: 58 mm - Tailstock shaft travel: 155 mm - Morse taper tailstock: 4 Engines: - Power main motor: 7.5 kW - Power DC motor Z-axis: 6.8 Nm - Power DC motor X-axis: 3.4 Nm - Motor pump power: 0.57 ...