129,522 used machines on RESALE, but how to find them? Machine Search
Dust extraction, welding fume extraction, filtering, self-cleaning, pneumatic, vacuum dust extraction, absorbers for plasma, lasers, sandblasting and all types of dry dust. Donaldson Torit Model: 2DF 4C EX Cartridge filter cartridges, which are pneumatically cleaned by pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum.
Dust extraction, welding fume extraction, filtering, self-cleaning, pneumatic, vacuum dust extraction, absorbers for plasma, lasers, sandblasting and all types of dry dust. Donaldson Torit Model: 2DF 4C EX Cartridge filter cartridges, which are pneumatically cleaned by pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Year of construction: 1995 Voltage : 660 V Power : 4 kW Frequency : 50Hz Capacity : Unknown
pressure: 100 t chamfer lenght: 2050 mm control: CYBELEC DNC 880S weight: 8000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine Details Stock-No. 1105-03893 Type of machine Surface Grinding Machine - Horizontal Make CANTALUPPI Type 2100 x 450 Year of manufacture 1975 Type of control conventional Storage location FRANCE Country of origin Germany Delivery time immediately Freight basis EX WORK Technical details grinding length 2100 mm grinding width 450 mm workpiece height 650 mm table surface area 2200 x 750 mm distance table - spindle center max. 600 mm table speeds 1 - 25 m/min Cross Feed Autom. 1 - 60 mm/stroke grinding wheel size 400 x 100 x 76 mm grinding wheel speeds 1450 rpm total power requirement 15 kW Additional information Accessories: Magnetplate, 2100 x 400 mm, grinding wheel with flange, draw-off Device.
Technical data for the shelf connector: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Shelf connector, used for shelf spacing: 250 mm Total length: 250 mm Cross-section: U 35x25 mm Material thickness: approx. 2.00 mm Material color: sendzimir galvanized Borehole diameter: 11 mm Weight: 0,330 kg | Pcs. 02x Screws M10 x 35 mm 02x Nuts M10 General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.
Brand Bauer Model: GF-24KW Year of construction: Unused, 2023 Serial Number: On request Capacitance (KvA) 30 Capacity(kw) 24 Engine model ZH4100D Fuel: Diesel Alternator model YHG-24KW Voltage 400 Frequency (Hz) 50 RPM 1500 Amperes (A) 43.3 Dimensions LxWxH (mm) 1600 x 760 x 1650 Weight (Kg) ca 600 Number of pieces in stock 2 Made in China Comments Unused open skid diesel generator, Smartgen genset controller
Key data: 4200 mm, 1090 , 70
Screw diameter: 70 mm Injection weight in polystyrene: 1090 g Clamping force: 4200 kN Screw diameter: 70 mm Stroke volume: 1212 cm³ Injection weight in polystyrene: 1090 g/hp Injection pressure: 1,877 bar Clamping force: 420 t Lights Tie bar spacing H x V: 810 x 710 mm Tool installation height - min.: 380 mm Opening distance: 710 mm Microprocessor control: NC4 Screen text: German Operating instructions: German FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- Pump drive power: 45 kW Total connected load: 82.4 kW Total weight: 20,000 kg Total size: 7.9 x 2.3 x 2.5 m Payment terms: 100 % before taking over the machine, net only
Machine type: Pulse arc inverter welding machine with touch display Make MERKLE Type HighPULSE touch 280 K Serial No. 130.233 Connection voltage 3 x 400 volts Setting range 25 – 280 amps Duty cycle 35 % d.c. at 280 amps 100% d.c. at 200 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable industrial plant design with a connection for water cooling Wire feeder 4-roller drive DV 26 Fuse 16 amps Dimensions L x W x H 600 x 300 x 565 mm Weight 33 kg Age: 2 years Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welding gloves wi ...
Machine type: Pulse arc inverter welding machine with touch display Make MERKLE Type HighPULSE touch 280 K Connection voltage 3 x 400 volts Setting range 25 – 280 amps Duty cycle 35 % d.c. at 280 amps 100% d.c. at 200 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable industrial plant design with a connection for water cooling Wire feeder 4-roller drive DV 26 Fuse 16 amps Dimensions L x W x H 600 x 300 x 565 mm Weight 33 kg Age: 6 months Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welding gloves with cuff 1 piece sp ...
Adjustable jaw from 90 to 45 degrees, High: 1210 mm, Long: 1280 mm, Width: 710 mm, Weight: 410 Kg, Voltage: 220/380 V, Total power: 2.5 Cv, Ø max. cut: 260 mm, Blade length: 450 x 38 mm (18 ), Specification: Hydraulics
x-travel: 2.200 mm y-travel: 560 mm z-travel: 720 mm control: 840 D Powerline ShopMill Siemens Main spindle:: turning speed range - main spindle: 20 - 12.000 min/-1 power capacity - main spindel: 35 / 25 kW max. Torque: 130 / 87 Nm tool taper: SK 40 internal coolant system feed: 40 bar work table:: table surface area: 2.600 x 600 mm max. table load: 2.200 kg number of T-slots: 6 T-slot - width: 18 H7 mm T-slot - distance: 100 mm Tool-Presetter:: number of toolpositions: 30 pos. max. tool length: 300 mm max. tool weight: 6 kg max. tool diameter: 80 / 125 mm feeds:: feed speeds: 20.000 mm/min input unit: 0,01 mm rapid traverse ( X / Y / Z ): 100 / 50 / 50 m/min measuring system: Resolution: 0,001 mm total power requirement: 60 kVA weight of the machine ca.: 12,5 t dimensions of the machine ca.: 6,0 x 3,7 x 2,9 m Documents: Chip conveyor: Coolantsystem: high pressure coolant: throu ...
Key data: 3500 mm, 810 , 60
Screw diameter: 60 mm Injection weight in polystyrene: 810 g Clamping force: 3500 kN Screw diameter: 60 mm Stroke volume: 891 cm³ Injection weight in polystyrene: 810 g/hp Injection pressure: 2,420 bar Clamping force: 350 t Lights Tie bar spacing H x V: 720 x 720 mm Tool installation height - min.: 350 mm Opening distance: 730 mm Microprocessor control: NC5 Screen text: German Operating instructions: German FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- Pump drive power: 55 kW Total connected load: 78.1 kW Total weight: 17,300 kg Total size: 7.4 x 2.0 x 2.4 m Payment terms: 100 % before taking over the machine, net only
Capping machine for bottles. Capper incl. various format parts, exit turntable, infeed vibrators. The machine stays in line with a filling machine GRONINGER, DFV 6000.
Screwdriver Alcoa Year of construction: 1991 Type: DC 2090ZS Control: Siemens S5 Capacity: up to 50,000 bhp
Kettner Type: Pressant 2000EP Model: Box Depalletizer Year of construction: 1990 Capacity: max 40 pallets/pcs.
Key data: 2500 mm, 521 , 55
Screw diameter: 55 mm Injection weight in polystyrene: 521 g Clamping force: 2500 kN Screw diameter: 55 mm Stroke volume: 570 cm³ Injection weight in polystyrene: 521 g/hp Injection pressure: 2,470 bar Clamping force: 250 t Lights Tie bar spacing H x V: 630 x 630 mm Tool installation height - min.: 300 mm Opening distance: 550 mm Microprocessor control: Selogica direct Screen text: German Instruction manual: German FHK interface for robots: Euromap 67 Core pull: 1 x Without material hopper / Without water battery: -/- all-electric injection moulding machine Total weight: 14,500 kg Total size: 6.7 x 2.1 x 2.3 m Payment terms: 100 % before taking over the machine, net only
Kettner Year of construction: 1990 Type: Pressant 2000EP Model: Box Palletizer Capacity: max. 40 pallets/pcs.
; Gross weight [kg]: 2550; Engine: Volvo TAD840GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger; Water Tank Volume [l]: 400
1 x Weftstraithner Fab: PLEVA Type: SL1 WORKING WIDTH 1800 MM. for use in Stenter- sanforizing and all finisching Machine. the Machine is with wheel and can move to different machines.
; Gross weight [kg]: 9896; Registration Number: 1; Engine: Perkins 4008-30TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including ATS System for Automatic start/stop when the grid fails.; Water Tank Volume [l]: 2060
Technical data for the pallet rack beam: Shelving system: Hovuma The scope of delivery includes: 01x Pallet rack traverse, used Material color: green INP profile: 80 x 42 mm Agraffe: 2 hooks clear width: 2,400 mm max. load per pair of trusses 2,400 kg, at the same time. distributed load 02x locking pins, used Version: complete. galvanized To secure the longitudinal beams against unintentional lifting
Key data: 5 KW, 1450 1/min
4 poles
table length: 2000 mm table width: 2000 mm table height: 200 mm bore: 28 mm weight: 1299 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
For sale : 200/250 ml Square conversion kit for A3flex machine. I send photos by email.
Catalogue number: 6824 TECHNICAL SPECIFICATIONS - max width of the workpiece 220mm - max height of the workpiece 125mm 4 spindles: 1) horizontal bottom 220mm 7,5kW 2) vertical right 125mm 3) vertical left 125mm; (2 and 3 spindles) 11kW 4) horizontal top 220mm 11kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - 4 pulling, toothed and metal insertion rollers from above - from above 1 double shaft pulling, rubber - from the bottom of the pulling shaft, rubber - feed on cardan shafts - smooth regulation of feed speed 6-22m / min - feed motor 3kW - lifting motor 0,55kW - electrical setting of planing thickness - length of the introductory table top 2470mm - central lubrication - diameter of extraction connection 3x120mm, 140mm - locked in the cabin - dimensions length / width / height 3940x1450x1470mm - weight 1666kg – unpainte ...
The Okuma MA series is a horizontal machining center with long travel distances for heavy-duty machining. The travels X/Y/X 1000/900/1000 mm. This machine is designed for very high precision and, above all, stability when machining large workpieces. The pallet size is 630 x 630 mm -OSP P200M -BJ 2008 -Cuttng Time 17,500 h -Renishaw Tool Eye -ATC 150 SK50 -2 pallet system -Spindle speed 6000 RPM -B-axis NCB 0.001 degrees -X/Y/Z 1000/900/1000 mm -Mayfran Consept coolant system with chip conveyor & high pressure pump 60 bar In addition, we will be happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and the subsequent service. We operate Okuma CNC service throughout Europe both electronically and mechanically and on top of ...
Robot Fanuc LR Mate 200iC/5L R30iA Control: R30iA Year:11/07 Number of axes: 6 Max. payload: 5Kg Max. working range: approx. 892 mm Scope of delivery : Robot,Control,Cable,Teach Panel
Max. bending length: 2000 mm Max. sheet thickness: 8 mm steel Clockwise and counterclockwise rotation Motorized rear roller infeed Safety kill switch Conical rounds possible
The scope of delivery includes: 01x Rear wall grille, used Material color: creamy white overall width: approx. 2,200 mm total height: approx. 1,200 mm Mesh size: approx. 60 x 50 mm Frame profile abm. (width): approx. 20 x 20 mm Frame profile abm. (height): approx. 15 x 15 mm Wire thickness: approx. 3.00 mm Weight/ pcs.: approx. 8,14 kg Internal designation: RW-2
Flywheel size: SAE4, 2 units available; Gross weight [kg]: 87; Accessories: Including: 3 current transformers
; Gross weight [kg]: 652
; Power [PS]: 61; Gross weight [kg]: 4000; Accessories: Tanker, Battery, Control Panel, Stahldach, Input: AC socket: 3P/5W, 1x125kW - DC socket: 1x50kW - AC socket: 3P, 1x60kW, Output: AC socket: 3P/5W, 1x125kW; Water Tank Volume [l]: 300
The scope of delivery includes: 01x Rear wall grille, used Material color: creamy white overall width: approx. 2,200 mm total height: approx. 1,000 mm Mesh size: approx. 60 x 50 mm Frame profile abm. (width): approx. 20 x 20 mm Frame profile abm. (height): approx. 15 x 15 mm Wire thickness: approx. 3.00 mm Weight/ pcs.: approx. 7,17 kg Internal designation: RW-3
Vertical panel saw 5200 x 2200/2100 mm 4 kw motor Panel saw with pliers For trimming pruning
Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: Aircontrol 5.0 (4-20mA) Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator Performance data Volume flow at operating pressure 7.0 bar 0.27-1.86 m³/min Volume flow at operating pressure 10.0 bar 0.37-1.50 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 13.3 kW Rated power motor; IP55 11.0 kW Oil volume 4.7 lt Pressure dew point refrigerant dryer ( 20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above cooling medium temperature 4 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 63 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dr ...
Stock# U2412-3 Unused progressing cavity pump by Allweiler type AEB 1E 200. Pump is driven via Nord gearbox and el motor 2.2 kW, 1445 rpm, 230/400 V, 50 hz. Pump works with rotation up to 150 rpm. Working output depends on product and rotation and can reach from 5 l/min, up to 500 l/min. At current rotation on gearbox pump can reach 60 l/min / 3600 l/h. Mounted on carbon steel base.
Key data: 7 , 10 , 1
Oil lubricated screw compressor Cooling: Air-cooled design Drive: Efficient IE3 motor with belt drive Control: fixed speed Control: Airlogic² T touchscreen full-color display Refrigeration Dryer: Integrated Performance data Volume flow at operating pressure 9.5 bar 1.15 m³/min Operating pressure min. / max. 5.5 / 10 bar Total power consumption at 9.5 bar / full load 10.0 kW Rated power motor; IP55 7.5 kW Oil quantity 3.7 lt Installation data Ambient conditions min. / max. 1 / 46 °C Cooling air demand 1188 m³/h Free fan pressure 30 Pa Sound level 65 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Dimensions and weight Length x width x height 1625 x 665 x 1535 mm Weight 355 kg Compressed air outlet G 3/4 "ig Capacity compressed air tank 270 lt
Modell: PPK STADLER Motor: ELECTRIC Operative Data: W. 6.500 mm x L. 2.500 mm x H. 4.000 mm Hourly Production: 15 t/h N° Paddles: 2x 6 Pz Useful Length: 2.180 mm Power Consumption: 4 kW N° Fractions: 2 Weight: 8.000 Kg Treated Materials: PAPER / CARDBOARD
Rheometer Make: Alpha Technologies Model MDR 2000 P
FrymaKoruma (ProXES) Type DinexH 200 vacuum high shear emulsifier for the production of high-quality emulsions, suspensions, creams and lotions, total volume 200 litres, usable volume 160 litres, minimum volume 15 litres, usable operating pressure product chamber -1.0/0.0 bar, usable operating pressure double jacket -1.0/+6.0 bar, scraper agitator (single-arm, counter-rotating scraper agitator, direction reversal for cleaning, flow breaker with perforated mixing blade mounted in the lid, PTFE scraper plate, agitator drive 1.5 kW, agitator speed fixed), high-performance homogeniser (rotor/stator system, tool size 160 mm, power 22 kW), main vessel lid (domed design, camera installed on the lid, 1 DN 125 sight glass incl. wiper and light, 1 DN 32 vent valve incl. electro-pneumatic valve, 1 pressure transducer, lid closure by means of segment clamp screws), container lid can be lifted, tilte ...
Stock # UG6363 Used chocolate enrober line by Chocoma (Denmark) with a belt width of 320 mm. The construction of the line is made of stainless steel, aluminum and painted mild steel. The line consist of: - chocolate enrober machine type 2MP32, belt speed adjustable in the range of 0,45 - 1,75 m/min, - cooling tunnel type C + CS, belt speed adjustable in the range of 0,0 – 3,0 m/min, - tempering machine / jacketed mixing tank type 2T.
table length: 600 mm table width: 400 mm x-axis: 400 mm y-axis: 300 mm z-axis: 350 mm workpiece sizes: 900 x 630 x 350 mm volume: 490 L total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Mooney Viscometer Make: Alpha Technologies Model MV 2000 Rotational Speed 0.1 to 10 rpm, temperature Range ambient to 200C, torque Range 0.01 to 200 MU, rotors large: 38.10 mm D, small: 30.48 mm D.
Cool Guntner Type: GHN080.2F/210-E Cooling capacity: 54 kW at DT8, 43 kW at DT7 Surface: 235 m2 Air flow: 37 320 m3/h Fin spinning: 10 mm Electric heaters Fans: 2 x 800 mm Dimensions: 4000 x 900 x 1300 mm Refrigerant: Freon Volume: 86.5 l Waga: 460 kg Items in stock: 3 Reference number: CH 392 Price on request, We have many other equipment : Bitzer, Copeland, Frascold, Lunite, Kueba, Guentner, Eco, Alfa-Laval, Goedhart, Helpman
maximum number of results exceeded
please refine your search
