sm 102 2 used for sale

Coating/varnishing machine manufactured in 2011. This CEFLA Smartparquet MRF-2VS/300 features a working width of 300 mm and a total installed power of 6 kW. If you are looking to get high-quality coating capabilities, consider the CEFLA Smartparquet MRF-2VS/300 machine we have for sale. Contact us for further details.

Center height: 225mm, distance between centers: 1000mm, swing over bed/cross slide: 450mm/260mm, spindle bore: 65mm, max. spindle speed: 3000rpm, max. feed rate: 10m/min, tool turret: 4, main motor power: 7.5kW, control: Fanuc 0i Mate TC. Machine dimensions X/Y/Z: approx. 3500mm/1500mm/1700mm, weight: approx. 1550kg, operating hours: approx. 27000h, feed hours: approx. 1329h. Documentation available. An on-site inspection is possible.

Inv. Num. : 8718 Type: LDC 250 Producer: SMERAL Created: 1987 Parameters: Compressive force: 245 t Maximum stroke rate upper table: 38 1/min Adjusting the ram: 120 mm Ram stroke: 200 mm Machine weight: 29800 kg

Meat grinding machine Manufacturer: Sind Voltage: 380V / 50Hz

General SKU212T515 LocationBarneveld MakeBuss-SMS GMBH Main Features MaterialStainless steel Specified Features - Separator Separatorcheck Capacity225 Ltr. Used onBulk pharmaceuticals (medicine) InletDN 25 Liquid outletDN 25, DN 25 Mounted on stainl. steel framecheck MaterialStainless steel 1.4571 (316Ti) General No.22.11.0519/4 Year of construction1994 Floorspace0.75x0,85 m Total height1.38 m Weight230 kg Extra SpecificationsTÜVoperating pressure: -1/3.2 bartest pressure 4.8 bartemperature: -10/200 °COils & fatSeparatorsGeneric medicinesBiotechnologyFeed additivesCosmeticsFood additivesLubricants & oleoDairySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIBuss-SMSIndustries > Food & Feed > Oils & fatCentrifuges > SeparatorsIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > BiotechnologyIndustries > Food & Feed > Feed additivesIndu ...

Qty. 1 Second-hand Complete Aluminium Extrusion Line Mfc.: SMS, Junker, Allen Bradley Force: 2500 MT Built: 1983 Modernised: 2017 Allen Bradley Ethernet Control System & NITROGEN DIE Cooling system Billet dia.: 8” Length: 450 – 950 mm Scope of supply: Log Loading Table Log Furnace Extrusion Press Run-out table Single Cable Puller Cooling Ventilator System Section Stretcher Storage Table Finishing Profile Saw Aging Furnace Die Heating Furnace Automatic Stacker Spare Parts

Electrolux Smart Variomix 200L Boiling pan 2017, Stainless, 200L cooking kettle, electrically heated, 39.7Kw, max temp 127'c, with spare mixing arm and spare parts, 3Ph

A repair-required Safan CNC press brake is available. Working width: 2050mm, press force: 400kN, ram stroke: 180mm, installation height: 450mm, closing speed: 90mm/s, working speed: 20mm/s, machine dimensions X/Y/Z: approx. 3000mm/1500mm/2500mm, weight: approx. 5000kg. The tool clamping system of the machine is defective. Documentation available. An on-site inspection is possible.

Year : 2001 Thermal stripping machine for cleaning parts covered with plastic, paint such as dies, nozzles, filters. The combustion chamber is heated to approximately 420 degrees. The metal parts to be cleaned are placed in a basket which is introduced into the preheated cleaning chamber. Perfect cleaning for a cycle time of 90 to 150 min. Dimensions of the cleaning chamber: diameter 220 mm and Length: 350 mm Dimensions of the basket : diameter 210 mm and length: 260 mm Dimensions (L x W x H) : 0,90m x 0,70m x 1,60m Weight : 120 kg

VP-2500HP-CL32, year of manufacture 2017 64 CL feeder, 32 push feeder, 4 heads Find more here - .ucymachines/ Contact us at - sales@ucymachines

General SKU345S727 LocationBarneveld MakeBuss-SMS TypeM-2500 No.0020 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Technical specs Max. temperature150 °C Main Features MaterialStainless steel Volume2500 Ltr. Motor30 KW Specified Features - Paddle dryer Paddle dryercheck Capacity2500 Ltr (bruto 3200 Ltr) Trough sizesdia.1630 x1675mm InletDN300 OutletDN300 With jacket(174 Ltr) Shaft can be heated(60 Ltr) Max. temperature150°C. With mechanical sealcheck Motor30,0 KW, 400/680 Volt Speed mixing shaft1-51 rpm MaterialStainless steel 1.4571 (316Ti) With jacketcheck General Year of construction1995 Total height2,8 m Weight± 12.000 kg Extra Specificationsthis Buss-SMS is equipped with a mechanical seal reconditioned by EagleBurgmann- with Fima dust Filter, Type TMF3/1.65, pressure: -1/+1bar, max  ...

CNC lathe, year 2013, CNC SMART. Used machine in good condition. More info & price on IndustrialBuyer.

turning diameter: max. 356 mm turning length: 705 mm control: MSX 850 III MAPPS Mitsubishi greates pass round over bed: 923,8 mm Swing dia. over traverse guideway: 755 mm standard turning dia.: 275 mm Main spindle:: max. spindle speed: 4.000 min/-1 power capacity - main spindel: 18,5 / 15 kW spindle nose: JIS A2-8 spindle bearing diameter: 140 mm spindle bore: 91 mm max. bar capacity: 80 mm chucking diameter: 305 mm C-Axis: 0,001 ° Subspindle:: Spindle speed range subspindle: max. 6.000 min/-1 power capacity - Sub spindle: 11 / 7,5 kW spindle nose: JIS A2-5 spindle bearing diameter: 85 mm spindle bore: 43 mm chucking diameter: 210 mm C-Axis: 0,001 ° turret:: number of toolpositions: 12 pos. Number of driven toolspositions: 12 pos. Shank diameter: 26 mm Drill shank diameter: 50 mm Spindle speed - driven tool stations: max. 6.000 min -1 turret change time: 0,25 sec. axis stroke:: x-a ...

SMEC NS 2000 MYear of manuf. : 2022 Control : Siemens SINUMERIK 828D Turning diam. : 288 mmTurning length : 243 mm____________Description:Main spindleTechnology:Belt-driven spindleSpeed:4,500 rpmPower (max.):20 kWBar capacity:67 mmWorkpiece clamping:3-jaw chuck, Samchully MH-208BV1Tool holder:Technology:12-station turretTool holder:BMT45Tool drive:5,000 rpmTravel in X/Y/Z:175/-/350TailstockTechnology:Manual adjustmentTubus stroke:80 mmTubus diameter:65 mmMount:MT4Features/Accessories:Chip Management:Chip ConveyorCoolant Management:IKZ Pump with Oil Skimmer and High Pressure, 10 barAutomation:PreparedFinished Parts Removal:Parts Catcher with Collection Box

Horizontal turning machine manufactured in 2012. This Mazak Quick Turn Smart 200 features a 12-position turret and is equipped with a Hainbuch chuck, enhancing its versatility. It has a bar capacity of 65 mm, making it suitable for various turning applications. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn Smart 200 machine we have for sale. Contact us for further details.

This 3-axis CMS Smartline 2040 waterjet cutting machine was manufactured in 2023. It features an impressive X-axis stroke of 4,000 mm, Y-axis stroke of 2,000 mm, and a maximum cutting thickness of up to 220 mm. The machine includes a robust worktable size of approximately 4,150 × 2,080 mm and is equipped with a high-pressure intensifier pump. If you are looking to get high-quality cutting capabilities, consider the CMS Smartline 2040 machine we have for sale. Contact us for further details.

🔧 GE-Elements 200 x 250 cm †flexible, versatile, and ready for their next job! Looking for a formwork solution that adapts to your project †while staying budget-friendly? Then take a closer look at our GE elements. 😉 Whether used as hand-set or large-area formwork , these elements provide a solid base for a wide range of applications. Thanks to the modular system , even individual or more complex layouts can be handled without overcomplicating things. 💡 The elements feature a robust flat steel frame and are compatible with all PASCHAL systems †perfect if you want to integrate them into your existing setup. 🔁   👉 Please note: These elements are used and show significant signs of wear . They are best suited for medium to low requirements or projects where functionality matters more than appearance.   With the universal con ...

Horizontal turning machine manufactured in 2007. This Pinacho Smart-turn6 260 features a distance between centers of 1,500 mm and a maximum turning diameter with soft jaws of 500 mm. It is equipped with a spindle speed of 2,400 rpm and a spindle bore of 80 mm. If you are looking to get high-quality turning capabilities, consider the Pinacho Smart-turn6 260 machine we have for sale. Contact us for further details.

round bar steel: div mm square edge steel: div mm L-beam: div mm No. 2984: 1 used plate, profile and bar shear with notcher 50 to manufactured by PEDDINGHAUS, type 210 / 13 Standard, built 1965 No. 3418: 1 used combined section shear 80 tonnes manufactured by PEDDINGHAUS, type 210 Super 16, built ca85 Cuonnbjt0a No. 3668: 1 used steel section shear + punching machine 95 to PEDDINGHAUS, type 210 Super 20, year of construction 1978 Space requirement 2.20 x 1.00 x 2.35 m, weight approx. 4.5 tonnes No. 3286: 1 used steel profile shear 65 to MUBEA / MUHR & BENDER, type KBL 16 N No. 1096 1 used hole punch 26 to EDEL SMO 26, various accessories The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

B&A REF: WITTMANN BATTENFELD SmartPower TON: 300 SCREW DIAMETER: 65MM SHOT WEIGHT: 991 STROKE VOLUME: 1078CM3 INJECTION PRESSURE: 2070AR PLATEN SIZES: 1130 X 1155MM DBTB: 800 X 720MM MIN MOULD HEIGHT: 400MM MAX MOULD HEIGHT: 850MM MOULD OPENING STROKE: 850MM MAX DAYLIGHT: 1250MM EJECTOR STROKE: 300MM CONTROLS: UNILOG B8 CORE PULLING: 2 AIR VALVES: 6 MOTOR: SERVO HYDRAULIC HEATING CAPACITY: 24.5KW ROBOT: WITTMANN WX 152 SERVO SCREW DRIVE: HYDRAULIC HOT RUNNER: 8 ZONE

CONTROLS   CNC controls MITSUBISHI M720BM BASIC FUNCTIONS   number of spindles: 2   number of turrets: 1   live positions: yes   number of c-axes: 2 WORKING RANGE TURNING   swing diameter (max): 700 mm   turning diameter (max): 350 mm MAIN SPINDLE   spindle revolutions (max): 4000 /min   spindle bore diameter: 90 mm   c-axis: yes X/Z SLIDE   - rotation speeds (max): 6000 /min TOOL MAGAZINE   number of positions: 24 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 7500 kg ATTACHMENTS (TURNING)   chip conveyor: yes   coolant unit: yes   hydraulic system: yes   European CE standards: yes Machine in a good condition The spindle guides need to be replaced. Machine equipment (1500.- CHF (below)): - 1x double face and longitudinal turning tool holder - 3x face and longitudinal turnin ...

Key data: 395 mm, 450 mm

6-axis CNC turning center Control: SIEMENS Sinumerik 828D incl. OPERATE + PPU290 Flat guides in all axes Main and sub-spindle Max. speed: 6,000 1/min 12-station turret (all driven) Speed of tools: 5,000 1/min Y-axis B-axis Travel: X= 235, Z= 580, Y= +- 52.5, W= 580 mm Bar Passage: 67 mm incl. tool package Chip conveyor

cylindrical grinding machine, year 2012, CNC Sinumerik, con controllo di contatto Dittel Marposs Sensitron 6. Used machine in good condition. More info & price on IndustrialBuyer.

turning diameter:570 mm turning length:- mm control:- Diameter of rotation above the bed slide:360 mm Maximum width:2.000 mm revolutions per minute:max. 2500 U/min :11 kW max. longitudinal feed:7,5 m/min max. transverse feed:7,5 m/min rapid traverse longitudinal:12 m/min rapid traverse cross:15 m/min Pinole diameter:95 mm Pinolenhub:220 mm Pinolen intake: MK 5 weight of the machine ca.:2,97 t dimensions of the machine ca.:3,8m x 1,3m x 2m m Technical description: - Tool turret - automatic - 8-fold (see also options) - CAPTO Revolver Disc - Machine bed - made of perlite casting GG-26 - high stiffness due to strong ribbing - Bed slides - guideways hardened and ground - automatic lubrication of the bed rail - Reitstock - manual - Quick clamp - Operator station - two movable handwheels on the operator panel - a movable handwheel - Control - "Siemens 828 D" CNC control - Siemens "Comfort" (in ...

pressure:200 t distance between columns:2100 mm stroke:550 mm Distance table/ram, stroke up:1800 mm table surface area:2000 x 2800 mm table height over floor:760 mm ram surface:2000 x 2000 mm Side window:2000 mm feed down:400 mm/s power requirement:51,0 kW weight:33,0 t dimensions (WxDxH):3,25 x 3,5 x 5,4 m Height above floor:5,4 m foundation pit:not necessary

pressure:200 t distance between columns:2100 mm stroke:550 mm Distance table/ram, stroke up:1800 mm table surface area:2000 x 2800 mm table height over floor:760 mm ram surface:2000 x 2000 mm Side window:2000 mm feed down:400 mm/s power requirement:52,0 kW weight:33,0 t Dimensions (WxDxH):3,25 x 3,5 x 5,4 m Height above floor:5,4 m foundation pit:not necessary

pressure:250 t distance between columns:930 mm stroke:200 mm Distance table/ram, stroke up:600 mm table surface area:900 x 860 mm die cushion capacity:100 t die cushion stroke:50 mm die cushion area:350 x 400 mm table height over floor:950 mm side window:380 x 380 mm ram surface:850 x 700 mm feed down:400 mm/s feed up:400 mm/s working feed:30 mm/s oil volume:350 l power capacity:45,0 kW weight:11,5 t Dimensions (WxDxH):2,0 x 1,2 x 3,4 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic depth stop:mechanical foundation pit:not necessary

Pressure:200 t distance between columns:1910 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:800 mm table surface area:1900 x 1150 mm pressure of drawing cushion in table:80 t stroke of drawing cushion in table:300 mm die cushion area:1500 x 950 mm table height over floor:800 mm side window:1000 mm ram surface:1900 x 1100 mm return capacity:36 t speed down:400 mm/s speed up:170 mm/s working speed:30,5 mm/s oil volume:1500 l height over floor:4,85 m height beneath floor:2,6 m power requirement:45,0 kW weight:38,0 t dimensions (WxDxH):3,05 x 2,8 x 5,55 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic

-reliably high load capacity across the entire beam length thanks to homogeneous web material -secured component load capacity, as all of the straps are machine stress graded and load-tested -consistent product characteristics owing to high dimensional stability -multiple savings compared to squared timber due to improved load capacity combined with lower weight -Certification EN 13377 -Produced in Austria from Doka Industrie The length of the H20 smart beam varies from 2,45m until 5,90m. Costs: 5,00 EUR/rm For more information or an appointment, you can contact me at any time. Phone: + 43 664 1296830 or Email:office@berger-international.at

42 x SFS smart prop plus 20-350 new â 36,20EUR/St â?¬1520,40 = NET 1 x Doka stacking rack new 130,00EUR Unlimited quantities / construction support also available separately Prices exclusive VAT and transport -Tragkraft min. 20 kN at any extended length (according to German approval Z 8,311 946) Maintaining the value of the supports for many years thanks to high-quality manufacturing and galvanizing -schnelles and safe release of the clamped support through optimized thread pitch European Community product, produced according to DIN 1065 tap-proof works thanks to crushing and resiliency issues like at 0049 176 70044689 Mr. Becker

We offer: Doka / Form-on smartPROPplus 20 550 new a 62.60€ / piece net Doka stacking rack 1.55 x 0.85m new 130.00€ ( 30 pcs in frame) Heavy load supports , galvanized DIN 1065 , at each extension length 20kn load -Load capacity min. 20 kN at each extension length (according to general building inspection approval Z-8.311-946) -Preservation of the value of the supports over many years thanks to high-quality production and galvanizing -fast and safe release of the clamped support due to optimized thread pitch -safe working thanks to squeezing and fail-to-back protection - They offer on 1 construction support ! If you have any questions, call Mr. Becker on 0176-700 44689 the sale and sale of scaffolding/formwork systems and construction machinery; Formwork restoration on fair terms. Company SFS Meisterbetrieb Andreas Becker e. Kfm., Tel. [07305-9562350],  ...

Electric heating: 48 KW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: integrated indoor of the chamber, friction generator Smoking material: wood Without the after-burning system Installation dimensions of the machine in cm: Width: 160 Length: 250 Height: 250 Trolley dimensions in cm: 100100200 height Delivery time: 30 working days after advanced payment

Type: FESSMANN T 3000 3 trolleys Heating: steam Control panel: DP 11 Base width: 151 cm Base depth: 347 cm Corpus height: 250 cm Min. room height: 304 cm Recommended room height: 320 cm Smoke-trolley dimensions (HxWxD), cm: 198x104x102 Connected load for HP heating: 111 kW Smoke generator: RZ 550 Machine width: 55,0 cm Machine length: 115,0 cm Machine height: 159,0cm Rated power: 1,8 kW

Type: FESSMANN T 3000 3 trolleys Heating: steam Control panel: DP 11 Base width: 151 cm Base depth: 347 cm Corpus height: 250 cm Min. room height: 304 cm Recommended room height: 320 cm Smoke-trolley dimensions (HxWxD), cm: 198x104x102 Connected load for HP heating: 111 kW Smoke generator: RZ 550 Machine width: 55,0 cm Machine length: 115,0 cm Machine height: 159,0cm Rated power: 1,8 kW

Electric heating: 18 KW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: integrated indoor the chamber Smoking material: wood chips Without the after-burning system Installation dimensions of the machine in cm: Width: 130 Length: 120 Height: 230 Trolley dimensions in cm: 9090160 height Delivery time: 30 working days after advanced payment

Electric heating: 28 KW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood chips Without the after-burning system Installation dimensions of the machine in cm: Width: 150 Length: 140 Height: 270 Trolley dimensions in cm: 100100200 height Delivery time: 30 working days after advanced payment

Electric heating: 28 KW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood chips Without the after-burning system Installation dimensions of the machine in cm: Width: 150 Length: 145 Height: 275 Trolley dimensions in cm: 100100200 height Delivery time: 30 working days after advanced payment

Electric heating: 18 KW Adjustable air circulation Servo motor fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood chips Without the after-burning system Installation dimensions of the machine in cm: Width: 130 Length: 120 Height: 220 Trolley dimensions in cm: 8080170 height Delivery time: 30 working days after advanced payment

Fessmann smokehouse with capacity for one trolley, designed for professional meat processing and smoking applications. It features electric heating with a power of 17 kW and an integrated smoke generator mounted in the smokehouse door, ensuring even smoke distribution and stable processing conditions. Its compact construction and practical dimensions make it suitable for butcher shops, meat processing facilities, and small production plants. 1 trolley Heating: electric, 17kW Installation dimensions: Base width:112 cm Base depth: 110 cm Height total: 235cm Corpus height (without el.motor height and pipes): 187cm Smoke-generator – built in door

Due to production change, we are selling our still very young Fessmann Smoke/Cooking System T3000, oil-fired Bj 2022 Height 100cm Car size 198x104x102 Control: FoodCon.2 Touch 12" Incl. cooling coil and cooling machine 3.3kw autom. pneumatic door opener Voltage: 400V Front door hinge on the left Smoke Introduction: Top Complete system package: incl. matching grater smoke generator: RR325 M suitable for beech/oak/spruce wood incl. matching refrigeration dryer Beko model DPRA50 incl. matching refrigeration machine / outdoor installation 3.3kw

Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood chips Without the after-burning system

New CNC working machine brand: Cosmec Type: Smart 30, 5 Achsen Configuration example: other equipment possible on request The smart serie: - Flexibility through cantilever construction - Best equipped for door processing - Protection by laser system (instead of step mats) - Especially good for machining light / small workpieces The controlling: OSAI CNC system control + Aspan CAD-CAM software: - Aspan uses simple commands to execute the machining process - By entering dimensions you can precisely position the machining operations - The machining operations are displayed on the virtual workpiece. - Diverse macros facilitate programming (of holes, slots, linear milling, arc milling...) Aspan Doors - Software module for easy creation of programs for door processing. - Different door types are already stored (doors with milled arches, round doors...) - Doors can ...

Smoke detector -Dimensions: 125/180/H270 mm Price: per piece Quantity: 2 available -Weight: 4.6 kg

Consists of a cooking cabinet and smoking unit, including documentation. On-site inspection is possible.

Electric heating: 28 kW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood chips Without the after-burning system Installation dimensions of the machine in cm: Width: 150 Lenght: 145 Height: 275 Trolley dimensions in cm: 100 x 100 x 200

HEIDELBERG DIANA SMART 115, Manufacturer: HEIDELBERG, Year of construction: 2018, - 2018, - Folding Carton Line, - longitudinal seam carton:, - max. 1150 x 600 mm, - min. 75 x 55 mm, - min. 45 x 55 mm (with small carton device), - Fold-bottom carton:, - max. 1150 x 600 mm, - min. 146 x 80 mm, - 4-point erecting carton:, - max. 1150 x 680 mm, - min. 120 x 110 mm, - 6-point erecting carton:, - max. 1150 x 630 mm, - min. 250 x 130 mm, - with BELKHOFF control system, - Rolling and drying tunnel, - TÜNKERS EAS 480 output station, right, 2019, - in production, - Available: immediately, - Located in: Germany

Manufacturer: Mycronic Model: SMD TOWER 6150-7 The SMD Tower is an automated and flexible storage unit designed for positioning near the production line. The SMD Tower provide a controlled environment with the right components in the right place at all times, enabling quick and smooth changeovers in your SMT line. You can even store your most frequently used components with an Agilis feeder attached. The SMD Tower 6150-7 has a max capacity of 980 and a footprint of 1.46m². The key benefits of the SMD Tower: • 75% reduction of labour cost • 50% reduction in P&P downtime • 90% reduction of retrieval time • It keeps track of all stored reels and component quantities • A unique identification code ensures the right component is always provided or storage making mix-ups almost impossible • Needs barely one square meter of space to store up to 658 reels, and can be integr ...

SMI LSK 45 Shrink Wrapping Machine Model: LSK 45 Year of Manufacture: 2001 Capacity: up to 45 packs/minute Packaging Type: Film only (without cardboard pad/tray) Number of Infeed Lanes: 4 Suitable Container Sizes 500 ml 1.0 litre 1.5 litre 2.0 litre Available Pack Configurations 3 x 2 3 x 3 4 x 3 Additional Information Professionally dismantled on January 31, 2026. Machine was fully operational prior to dismantling. Technical documentation included. Video available upon request.

The Smipack DV150 is a fully automatic monobloc overlap shrink wrapper with an inline infeed conveyor. It packs products like glass/PET bottles, cans, jars, and boxes at speeds up to 25 packs per minute using a single film reel system. [1, 2, 3, 4], Key Features, Operation Modes: Works with film-only, or with pad/tray configurations depending on exact model variations (like ALX-T or ALX-P)., Infeed System: Multi-row inline infeed with an electromechanical oscillating sorter to align products., Film Handling: Single film reel design with optional printed film centering devices., Shrink Tunnel: Built with an efficient double-chamber shrinking setup. [1, 2, 3, 4, 5, 6], Technical Specifications, Max Output: Up to 25 packs per minute (ppm), Max Product Height: 380 mm, Max Reel Size: 650 x Ø 400 mm, Working Pressure: 6 Bar, Machine Weight: Approx. 1,682 kg, ed linking conveyor into a high-pe ...