sm 102 2 used for sale

Qty. 1 Second-hand cut-to-length line – in production Mfc.: Vigano (Italy), PLC: Siemens Built: 2000 available in 9 - 2023 Status: Still in production Strip width: 580 - 2000 mm Thickness: 1.5 – 6.0 mm Max coil weight: 30 tons Max width 1250 mm up to S420MC (max thickness 5 mm) Length of sheet: 580 - 6000 mm Tolerance: +/- 1 Daily production: 80 tons

Teigschlagmaschine verwendet. Die Maschine ist nach einer Generalüberholung betriebsbereit. Enthält zwei Stangen und zwei Kessel. Für weitere Informationen kontaktieren Sie mich bitte.

split chiller, chiller - water-cooled, Type: OCEAN Tech OCTME 230 – 66 kW Manufacturer: MTA S.p.A. OCEAN Tech OCTME 230 are water-cooled chillers for indoor installation in split version (without condenser) without hydraulic circuit (pump, accumulator) incl. crank tray heating, phase monitoring. Cooling capacity kW 66.2 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 11.4 Condensing temperature: 45°C Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 27 Max. current (A) 45 Starting Current Circuit (A) 178 Protection class: IP22 Dimensions: Length mm 1735, width mm 660, height mm 1200 Weight kg 383 Connection cold water G 2" B Refrigerant connection Ø mm: 22 / 28 ODF Serial No.: 2200388958 Year of construction 2022 Condition: Optical 1 , Technically ok (Stock unit, as good as new) Pri ...

Turbulent mixer / paddle dryer Manufacturer : Drais Volume : 2500 ltr. Material : wetted areas in stainless steel Drive : 57 / 40 KW Operating pressure : 5 bar Electr. Power supply : 380 V / 50 Hz; --> Machine with extendable mixing unit.

Volume : 2200 ltr. Material : Mild steel --> Batch mixer, mixer shaft speed : 120 rpm

split chiller, chiller - water-cooled, Type: OCEAN Tech OCTME 230 – 66 kW Manufacturer: MTA S.p.A. OCEAN Tech OCTME 230 are water-cooled chillers for indoor installation in split version (without condenser) without hydraulic circuit (pump, accumulator) incl. crank tray heating, phase monitoring. Cooling capacity kW 66.2 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 11.4 Condensing temperature: 45°C Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 27 Max. current (A) 45 Starting Current Circuit (A) 178 Protection class: IP22 Dimensions: Length mm 1735, width mm 660, height mm 1200 Weight kg 383 Connection cold water G 2" B Refrigerant connection Ø mm: 22 / 28 ODF Serial No.: 2200388958 Year of construction 2022 Condition: Optical 1 , Technically ok (Stock unit, as good as new) Pri ...

turning diameter: 1040/1900 mm turning length: 2000/3000/1250 mm swing diameter over bed slide: 740 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Make: EST-Ticino type: 520/2000 distance between centers min/max: 2000/3000 mm center height 520 mm Max. turning diameter over bed 1040 mm Max. turning diameter over support 710 mm max. turning diameter/length 1900 x 1250 mm spindle passage 135 mm with 3 jaw chuck with 4-jaw chuck quick change holder in very good and immediately ready condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The scope of delivery includes: 01x Shelf connector, used ( for lateral attachment to the shelf stand ) Manufacturer: Jung Heinrich Type: Esmena Material color: sendz. galvanized for shelf spacing: approx. 250 mm L – Profile: 85 x 40 mm Weight: 0,68 kg | Pcs.

Fiorini Storage Tank 8000 Liters VKB 2.0 - 1000L 4" Buffer tank 8000 liters 2x125FL 8 bar Make: IVRP - Fiorini Type VKG – 8,000 – V – 2x125FL – 8 bar Special model Painted on the outside, black on the inside 20mm insulation 2x flange connections DN 125 3 threaded connections 1/2" PN 8 bar Tmax: +60°C Dimensions: Diameter mm 1840, height mm 3465 Weight kg approx. 252.7 (empty) Connection: 2x DN125 Product no.: G0300062000035 Year of construction 2023/24 Condition: Optical 1-2, Technically ok Stock Equipment, as good as new Price: on request in Euro (plus VAT from Nettetal) – 3 months warranty (Technical changes and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Rheon VX is a series of stress free dividers, which can divide most of doughs - even extremely moist. From rye tin bread to italian ciabatta flat bread (see photos for examples and our test products). The machine has been fully renovated in 2020 and is ready for work! Weight range: One row: 100 - 2000 gr two rows: 30 - 1500 gr Length range: 75 - 999 mm Max. cutting speed per row: 20 cuts per minute. If you find the machine interesting, let me know via phone, mail or whatsapp!

; Gross weight [kg]: 520; Engine: Yanmar 4TNV88-22G; Accessories: Tanker, Battery, Control Panel; Water Tank Volume [l]: 60

Cutting length: 4300 mm Cutting height: 2150 mm automatic: , ELCON precision panel saw type D 215 ----------------------------------------------------- Cutting height: vertical 2,150mm, horizontal 2,100mm Cutting length: 4,300mm ----------------------------------------------------- Technical description: Cutting depth: max. 60mm Saw blade outlet behind the plate: max. 25mm Saw blade: diameter 250mm, bore 30mm, Z=48 hollow roof tooth Saw blade rotation: 5,100 rpm. Motor: 4 kW (S 6) Measurement reading for: horizontal saw cuts: via scale and strip cutting stop vertical saw cuts: above scale Extraction nozzle: 100 & 80mm Required air pressure: 6 bar Features: -Material support with 1 roll per meter of cutting length, switched on and off by foot pedal suspendable -1 infeed and outfeed roller -pneumatically yielding slatted frame -Central support, 1 support element per meter of cutting length ...

Machine Details Stock number 1105-03830 Machine type CNC lathe Brand HYUNDAI Type HIT 200 M Year of construction 2000 Control type CNC Control SIEMENS 810 D Storage location FRANCE Country of origin KORREA Delivery time immediately Freight base from stock Price Technical details Turning diameter 325 mm Turning length 400 mm Control SIEMENS 810 D Circumferential diameter over bed 500 mm Travel - x 215 mm Travel - z 420 mm Rapid traverse speed 24 m/min Speed range 30 - 4500 rpm Tool turret 12 FOLD VDI40 Spindle bore 52 mm Mounting cone in the tailstock quill MK 4 Tailstock quill diameter 80 mm Tailstock quill stroke 130 mm Drive power 15 kW Operating voltage 380 V/ 50 Hz Total power requirement 23.5 kVA Machine weight ca. 4.5 t Information MACHINE WITH C AXIS AND DRIVEN TOOLS - Control: SIEMENS 810 D - Hydraulic 3-jaw chuck Ø 204 mm - Tailstock with ...

Item tool holders for milling machine with SK40 (inner suit M16) DIN 2080 SK40-ER16 Long milling mandrels for Horzon valley milling in different diameters, partly with bearings Short milling mandrels for holding cutter heads Recordings with Morse cone in different sizes Everything according to photos

rotary table dia.: . mm max. dia. of grinding wheel: . mm with manual ongoing: . 0 manually feed: . 0 0.4 KW The technical Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 1931; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Caterpillar DE200GC Generator Set specifically designed for stand-by duty.; Water Tank Volume [l]: 325

; Gross weight [kg]: 400; Registration Number: 1

New and unused 2019 generator set with 0 running hours.; Gross weight [kg]: 13380; Engine: Perkins 4016-61TRG3; Accessories: Battery, Control Panel

offer 22346 Specifications: - Cutting length up to 200 mm - Cutting thickness - steel up to 6 mm - Stainless steel up to 4 mm - infinitely variable cutting angle adjustment 30 - 135 ° - Stroke rate 60 1/min - Table support surface with T-slots 800 x 1000 mm - Depth stops with scale and angle adjustment - Table height 860 mm - Drive 400 V / 2.2 kW - E. - Foot switch - Space requirement approx. W 1000 x H 1650 x D 1700 mm - Weight approx. 1300 kg

New and unused 2023 generator set with 0 running hours.; Gross weight [kg]: 7753; Engine: Perkins 4008-30TAG3; Accessories: Battery, Control Panel, Including : coolant heater and battery charger

Rated current (A): 2500, Poles: 3; Gross weight [kg]: 61; Accessories: Multiple breakers in stock!, NEW/UNUSED

We offer for sale a Cummins gas CHP 2000 KW. Specifications Engine: Cummins Type: D67 Power: 2000 KW Year of construction: 2007 Revolution: 1500 1/min Generator: Stamford Power: 2650 KVA Voltage: 380 V Frequency: 50 Hz Operating hours: 59,000 h

Diosna D 240a plus with 2 boilers Tipper Diosna HK 166 - after general overhaul

; Gross weight [kg]: 11000; Accessories: 40FT HC used Genset Container , ex FG Wilson P1650-E3, Inside dimensions: 8820x2200x2600 )LxWxH in mm)

; Gross weight [kg]: 6650; Accessories: 20FT Unused Genset Container

UPW 25x100 Thread rolling machine Available 2 machines. Pressure 25TONS Max. Workpiece Diameter 100mm Min. Workpiece Diameter 10mm Thread Length at Plunge Operation 180mm Thread Length at Continuous Operation 2000mm/80mm Distance Of Roll Spindles 150/325mm Length Of Roll Spindle Fixtures 180mm Dia. Of Rolling Tool 230mm Roll Spindle Turning Speed Range 20-90 U/Min Shaft Dia 63mm Weight 3,25 tons

; Gross weight [kg]: 13500; Accessories: 40FT HC Unused Genset Container

Key data: 370 mm, 600 mm

Machine Type: CNC Lathe Manufacturer: Okuma Type: LU300-2ST Year of Make: 2005 Control: OSP-E100L Delivery time: in stock Machinery  Parts conveyor belt and parts collection tray – workpiece chute with removal conveyor belt incl. electrical kit  2 disc turret with VDI40 (12 + 8 stations)  Power clamping cylinder for hollow chips – Hole in the drawbar 52mm  Extension Kit "D" – Kit one touch IGF-D  Open/close chuck while the spindle is running via M-Code  Reinforced coolant pump 8 bar  Coolant on A and B turrets can be switched via M function  Interface for connecting rod feed  Chip conveyor Technical details  Swing diameter over bed: 530mm  Swing diameter over slide: 380mm  Distance between the tips: 600mm  Max. turning diameter: 370mm  Max. turning length: 600mm  Travel X-axis: upper 260mm  ...

; Gross weight [kg]: 785

Panhans 261 tenon cutter Brand: Panhans Type: 261 M-No.: 1112 Machine data: saw: 2.6 KW, 3.000rpm, tool: ø400 mm, 160 mm cutting height Slot spindle 7.5 kW - 4,000 rpm, tool: ø400 mm, spigot length: 170 mm spindle clamping length: 160 mm Table: Manuel, with pneumatic workpiece clamps Tish height: Travel 80 mm Stop: Stop can also be used as miter stop Dimensions: approx. 1.9 m x 1.6 m, 1.7 m high, plus tenon table: 0.50.8 m Weight: 600 KG

; Gross weight [kg]: 2203; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 418

; Gross weight [kg]: 2238; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 418

Spiral kneader Kemper SP 250 A for max 400kg dough Spiral kneader Kemper SP 250 A with 2 stainless steel boilers, functionally tested and cleaned immediately available for sale in stock. The machine is equipped with 2 speeds and automatic timer. The boiler and the mixing tool are made of stainless steel. Optionally available with up to 8 boilers. -Kemper spiral kneader extendable -2 automatic timers -2 speeds -for max. 250kg flour / max. 400kg dough -with flour dust cover -with 2 boilers (optional with more boiler) -Stainless steel boiler, spiral and guide rod -380 volts 50Hz

TECHNICAL SPECIFICATIONS Manufacturer: BINDER+CO Designation: BIVITEC clamping shaft screen Type: LIV/ED 2600x8 Design: Dry sieving Number of screen decks: 1 Year of construction: 2005 Screen length: 8,000 mm Screen width: 2,600 mm Weight: approx. 16.5 t SPECIFIC COMMENT - Incl. drive - Incl. supports ------------------------------------------------- TECHNICAL SPECIFICATIONS Manufacturer: BINDER+CO Description: BIVITEC Flip Flow Screen Type: LIV/ED 2600x8 Version: Dry screening Number of screen decks: 1 Year of construction: 2005 Screen length: 8,000 mm Screen width: 2,600 mm Weight: approx. approx. 16.5 t SPECIFIC COMMENT - Incl. drive unit - Incl. supports

Caterpillar DE220GC Generator Set specifically designed for stand-by duty.; Gross weight [kg]: 1933; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 325

; Power [PS]: 272; Gross weight [kg]: 2859; Engine: Caterpillar C9; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 500

; Power [PS]: 299; Gross weight [kg]: 2859; Engine: Caterpillar C9; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 610

; Gross weight [kg]: 3500; Engine: N67TM7; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super Silent Canopy, - Stage V version available: Deutz TCD7.8 - Genset 220 kVA St5 SuperSilent- DPX-21006 + €44.000, -; Water Tank Volume [l]: 500

TECHNICAL SPECIFICATIONS Designation: Discharge belt Version: stationary Axle distance: 6,000 mm Belt width: 1,200 mm Year of construction: 2006 Drive power: 15 kW Drive type: Plug-on gear motor Support: free supporting structure Catwalk: not available Handover: Transfer hood Belt tension: Tensioning carriage Galvanized version: yes SPECIFIC COMMENT - Exhaust conveyor belt with close upper belt stations - No trough angle / straight load flow

; Gross weight [kg]: 2420; Engine: NEF45TM2A; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy, -Deutz TCD4.1 - Genset 110 kVA St5 SuperSilent- DPX-21004 + €23.500, -; Water Tank Volume [l]: 360

-Noise rating: 55 dB at 7m; Gross weight [kg]: 3400; Engine: NEF67TM3A; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy; Water Tank Volume [l]: 500

-Noise rating: 55 dB at 7m; Gross weight [kg]: 3400; Engine: NEF67TM3A; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy; Water Tank Volume [l]: 500

; Gross weight [kg]: 3651; Engine: Perkins 1206J-E70TTAG; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets: 125A, 63A, 32A (2x), 16A (2x single phase), Including: Coolant heater and battery charger; Water Tank Volume [l]: 822

Technical data for the pallet rack traverse: Shewing system: SSI Schaefer Type: PR600 The scope of delivery includes: 01x pallet rack traverse, new (second choice) Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Truss type: ASM50-CES80|40|1.5 Design: Stepped traverse for panel thickness: 22 mm Agraffe: 5 HK (hook) 2,400 mm clear width 02x locking pins, new Execution: compl. galvanized For securing the longitudinal members against unintentional lifting

; Power [PS]: 1360; Gross weight [kg]: 6985; Engine: Caterpillar C32; Accessories: Control Panel, Caterpillar C32 Genset from the official CAT Rebuild Programm., Engine is completely rebuild by CAT or even unused/surplus., All other components are usually new., Comes with the standard CAT factory warranty.

; Gross weight [kg]: 1500; Engine: Deutz TD2.2L3-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 150

Technical data for the pallet rack traverse: Shewing system: SSI Schaefer Type: PR600 The scope of delivery includes: 01x pallet rack traverse, new Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Truss type: TRV1-240-084-30CE Agraffe: 5 HK (hook) 2,400 mm clear width 02x locking pins, new Execution: compl. galvanized For securing the longitudinal members against unintentional lifting

; Gross weight [kg]: 1600; Engine: BF4M 2011; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 175