130,800 used machines on RESALE, but how to find them? Machine Search
Vacuum conveyor with electric vacuum pump. - Specifications: capacity: 1500-2500kg/h (with max. 5m conveying distance) |housing: stainless steel 304 | required compressed air: 0.6 MPa | air consumption: approx. 60L/min | power supply: 220V | power consumption: 7.5kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Vacuum conveyor with electric vacuum pump. - Specifications: capacity: 200-600kg/h (with max. 5m conveying distance) |housing: stainless steel 304 | required compressed air: 0.6 MPa | air consumption: approx. 15L/min | power supply: 220V | power consumption: 2.2kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Vacuum conveyor with electric vacuum pump. - Specifications: capacity: 50-200kg/h (with max. 5m conveying distance) | housing: stainless steel 304 | required compressed air: 0.6 MPa | air consumption: approx. 15L/min | power supply: 220V | power consumption: 1.5kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Checkweigher to check if product meets target weight. 6 sorting stations with 2 way reject device, each. - Specifications: belt width: 220mm | weight range: 5-1000g | accuracy: +/- 0.3-3g | max. speed of the machine in neutral: 60 cycles/minute | power: 220V, 1-phase | machine dimensions (mm) approx.: L2459xW684xH780(weighing belt). Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
High speed weigh checker with max. speed of 150 cycles/minute in neutral. Stainless steel (SS304) version, Memory Card parameter storage (up to 100 parameters), touch screen operation. Suitable to supply corrective signal to connected equipment. - Specifications: accuracy: +/- 0.5-1.5g | belt size: L450xW220mm | minimum scale: 0.1g | belt speed: 5-150m/min | power: 220V, 250W. Optional devices: blower device, T-push device, two way swing arm, slide down device. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Checkweigher with reject device to check if product meets target weight. New version with data readout. - Specifications: belt width: 220mm | measuring area (weighing belt): L500xW220mm | weight range: 10-1000g | accuracy: +/- 0.1-3g | max. speed of the machine in neutral: 80 cycles/minute | power: 0.3kW, 220V, 1-phase | machine dimensions (mm) approx.: L2269xW574xH780(weighing belt) | weight: 140kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Weigh checker with reject device to check if product meets target weight. - Specifications: belt width: 220mm | weight range: 5-999g | accuracy: +/- 1.5g. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Weigh checker with reject device to check if product meets target weight. - Specifications: belt width: 220mm | weight range: 1-10kg | accuracy: +/- 3.5g. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
X-ray inspection system especially for tin cans and plastic containers, jars. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: conveyor belt width: 200 mm | detection accuracy: Pb from ? 0.2 mm, Fe from ? 0.28 mm, SUS from ? 0.28 mm, non-metallic such as stone, glass, from ? 1.2 mm | X-ray output: 150 kVp, 7.5 mA | X-ray detector resolution: 0.4 mm | X-ray emissions: < 1usv/h | X-ray beam: vertical scan | conveyor belt height: 900 ? 30 mm | conveyor speed (dependent on product dimensions): 10 ?60 m/min | screen: 15 touch screen | software: intellisens?X-ray | operating temperature: 5 ? 35 ?C | reject system: optionally available according to requirements | power: 220VAC, 50/60Hz | dimensions of the system: L2000xW1300xH2060 mm | weight: 650 kg. Please note that our new prices are often below the usual used pric ...
X-ray inspection system for small single bags, packs. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: conveyor belt width: 250 mm | detection accuracy: Pb from ? 0.2 mm, Fe from ? 0.28 mm, SUS from ? 0.28 mm, non-metallic such as stone, glass, from ? 1.2 mm | X-ray output: 80 kVp, 1.25 mA | X-ray detector resolution: 0.4 mm | X-ray emissions: < 1usv/h | X-ray beam: horizontal scan | conveyor belt height: 850 ? 30 mm | conveyor speed (dependent on product dimensions): 10 ? 100 m/min | screen: 15 touch screen | software: intellisens?X-ray | operating temperature: 5 ? 35 ?C | reject system: optionally available according to requirements | power: 220VAC, 50/60Hz | dimensions of the system: L800xW860xH1580 mm | weight: 270 kg. Please note that our new prices are often below the usual used prices. Please feel free t ...
X-ray inspection system for small single bags, packs. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: conveyor belt width: 270 mm | detection accuracy: Pb from ? 0.2 mm, Fe from ? 0.28 mm, SUS from ? 0.28 mm, non-metallic such as stone, glass, from ? 1.2 mm | X-ray output: 80 kVp, 1.25 mA | X-ray detector resolution: 0.4 mm | X-ray emissions: < 1usv/h | X-ray beam: horizontal scan | conveyor belt height: 850 ? 30 mm | conveyor speed (dependent on product dimensions): 10 ? 100 m/min | screen: 15 touch screen | software: intellisens?X-ray | operating temperature: 5 ? 35 ?C | reject system: optionally available according to requirements | power: 220VAC, 50/60Hz | dimensions of the system: L900xW685xH1680 mm | weight: 300 kg. Please note that our new prices are often below the usual used prices. Please feel free t ...
Suitable for automatic grinding of tooth faces, tooth backs, and bases on carbide-tipped circular saw blades in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be ground automatically and in a single pass. Accessories: Full enclosure Measuring probe Grinding device with oil cooling Automatic fire extinguishing system Grinding mist extraction system N 183 Alphanumeric keypad Oil drip tray Machine light, saw diameter: 80-840 mm, Bore diameter: from 10 mm, sheet thickness: < 8 mm, Tooth pitch: 6 - 120 mm, Cutting length:
Granulating sieve Manufacturer: Frewitt Type: MGI - 205 Capacity: up to 1,000 kg/h (depending on the product) Motor power 0.75 kW-1.0 kW Bearings dust-tight inside and out, rotor speed infinitely adjustable The machine is suitable for dry granulation, screening, crushing, grinding, wet granulation. Rotor speed infinitely adjustable, easy cleaning Seven sieve inserts available (table is not included), documents available
Clamping Force: 60 tons (600 kN) Injection Unit Orientation: Vertical Rotary Table: Included Screw Diameter: Approximately 35 mm Shot Size: Around 4.4 oz (125 g) Injection Pressure: Up to 210 bar Injection Speed: Approximately 139 mm/s Mould Opening Stroke: 305 mm Ejector Stroke: 106 mm
Manufacturer: Engel Model: Victory 1800/ 260 Year of Manufacture: 2008 Specifications: - Clamping Force: 260 tons - Screw Diameter: 60 mm - Operating Hours: 88,266 Find more here - / Contact us at -
MUNK Günzburger Steigtechnik 303406 Aluminum access ladder machine crossing with platform (bridge) 1900-750-2500 RA2414 Technical data: Manufacturer: Munk Günzburger Steigtechnik Type: machine crossing with pedestal Condition: very good (used) Total size: 1900-750-2500 mm (WxDxH incl. handrail) step dimensions: 85 x 600 x 45 mm step/tread height: 230 mm platform dimensions: 800 x 650 mm Platform height: 1350 mm bottom edge 1420 top edge Steps: 6 (5 steps + platform on each side) Maximum working height: 3450 mm maximum load: 150 kg Weight: 38 kg Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag ...
Filter area: 20 m² (20 filters, approx. 460 mm x 1100 mm) Volume flow: 1500 m³/h Compressed air pressure: 6 bar Filter resistance: 8 mbar Total length: approx. 4300 mm Total width: approx. 2400 mm Diameter: approx. 1800 mm Tube diameter: approx. 125 mm each
Inv. Num. : 8438 Type: AF-200-75 Producer: Arisa Generated: Parameters: Maximum retraction speed: 200 t Top table length: 950 mm Top table width: 750 mm Maximum number of strokes: 20 1/min Ram stroke: 250 mm
table length: 3000 mm table width: 2000 mm table load: 200 t total power requirement: kW weight of the machine ca.: 8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: / mm plate thickness: / mm distance between columns: / mm total power requirement: kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
degree: 700 Grad The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 75 mm total power requirement: 14 kW weight of the machine ca.: 10 t - capacity at boring: 75 mm ( St 45 ) - spindle diam. 115 mm - taper in spindle: 110 mm/ Morse 6 - distance column to drilling spindel: 500.. . 2000 mm - vertical adjustment of arm: max. 1100 mm - distance column to drilling spindel: 450.. 2000 mm - drilling depth: 450 mm - range of speeds: 12,5 ...1600 U/ min // rpm - feed: 0,63 ... 3,15 mm / U - angle of arm: 360 ° The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 250 t throat: 400 mm stroke: 30...140 mm table-size: 1000 x 750 mm hole in the table: 360 x 400 mm ram surface: 630 x 500 mm ram adjustment: 110 mm total power requirement: 18 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate width: 3500 mm plate depth: 2000 mm plate height: 360 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t chamfer lenght: 2050 mm total power requirement: 11 kW weight of the machine ca.: 5,9 t dimensions of the machine ca.: m - ram adjustment: 150 mm - distance ram to table: 400 mm - stroke: 150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate width: 2500 mm sheet thickness - max.: 32 mm sheet thickness - max.: 39 mm sheet thickness - min.: 8 mm bale length: 2700 mm number of straightening: 7 Rollers number driven straightening rollers: 5 Stk straightening roll diameter: 290 mm diameter of input / output straightening rollers: 345 mm number of support rollers: 13 Stk diameter of support rollers: 288 mm stroke of upper beam: 120 mm straightening feed: 16 m/min rated power of main drive: 90 kW : 138 kw weight: 79 t - max. sheet thickness( St 50): 32 mm - max. sheet thickness( St 34): 39 mm - min. sheet thickness( St 50): 8 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 6 mm total power requirement: 3 kW weight of the machine ca.: 1,05 t work table:: 1000 x 800 mm Knife length: 205 mm dimensions of the machine ca.: m pressure: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 0,5...5 mm sheet width: mm punching force: 20 t travel -x axis: 1250 mm travel -y axis: 750 mm number of strokes: 20 per min ram stroke max. - stepless: 40 mm total power requirement: 14 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m pressure: t - max. thickness: 0,5 … 5 mm - travel in X : 1250 mm enlargeable to 2000 mm - travel in Y axis: 750 mm enlargeable to 1000 mm - number of strokes: 20 per min - stroke: 40 mm - Stanz- Ø 100 mm 1,5 mm -( punch diam. and thickn.) Ø 50 mm 3,5 mm Ø 16 mm 12,0 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning speeds: 6000 U/min x-axis: 550 mm z-axis: 200 mm rapid traverse: 30/20 m/min feed: 11 m/min control: Siemens 840 C total power requirement: 35 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: m - speeds: [1/min.] : 6.000 - torque [Nm]: 480 - swing diam.: 290 mm - power: [kW] 34 - chuck diam. 200 mm - turret: 12-fach, VDI 40, Sauter - driven tools 7,8 KW, - x -travel: 550 mm - z- travel: 200 mm - rapid travel: (X/Z) [m/min] 30 / 20 - feeds: (X/Z) [m/min.] 11 KN - connected load: [KW] 36 kW - machineweight: [kg] 6.500 - chip conveyor, pick up conveyor links,300mm wide, Auswurfhöhe 800mm - Messsystem direkt-linear, Glasmaßstäbe in allen Achsen, Heidenhain - parts conveyor for feeding parts into the machine - Specification: - Overhauled in 2007 for approx. €50,000, complete headstock replaced. - Feed unit replaced The data for this ad was created with ModulMW ...
length: 4000 mm width: 2000 mm weight of the machine ca.: 8,5 t Price 1,000 euros per square meter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 250 t throat: 360 mm Table dimensions: 1250 x 630 mm table diameter: 250 mm dimension of ram: 850 x 450 mm dayligth: 800 mm piston stroke: bis 500 mm diameter of piston: 400/360 mm ram stroke speed: abwärts 200 mm/sec ram stroke speed: aufwärts 110 mm/sec total power requirement: 20,5 kW weight of the machine ca.: 8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control measuring range: 50g-150g, accuracy class: XIII(1), scale graduation: 1g, readability: 1g, product weight min./max.: 10g/500g, cadence: 90rpm, measuring speed: 0.52m/s. Documentation available. On-site inspection is possible.
A Varpe double-track scale including a Loma metal detector is available. Accuracy class: XIII(1), scale division: 1g, readability: 1g, product weight min./max.: 30g/500g, cadence: 103rpm, speed: 0.5m/s. Documentation available. On-site inspection is possible.
roll diameter: 200 mm roll length: 400 mm rolls drilled: Peripher Nip adjustment: hydraulisch total power requirement: 2x 5,5 kW Condition: new rolling mill, with CE marking, with 2 year warranty Specification: Monoblock laboratory rolling mill 200 x 400 mm - new - Roller diameter: 200 mm - Roll length: 400 mm - Roll bore: peripherally drilled - Individual drives: variable friction ratio - Roller bearings: roller bearings with manual grease lubrication - Gap adjustment: hydraulic - Gap adjustment: approx. 1 - 20 mm, during normal operation operation - Speed range approx.: 2.5 - 19.5 rpm - New hydraulic unit for roller gap and emergency system emergency system - New Johnson-Fluiten rotary joints - two adjustable guide plates Tecafine PE5 Natural to reduce the working range. - Working range approx.: 100 to 360 ...
round bar steel: - mm square edge steel: - mm L-beam: - mm total power requirement: 7,5 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 2,212,35 m div. punches and dies Foot switch Spare blade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 250 mm roll length: 500 mm rolls drilled: peripher Nip adjustment: hydraulisch total power requirement: 2x 5,5 kW Condition: new rolling mill, with CE marking, with 2 year warranty Specification: Monobloc laboratory rolling mill 250 x 500 mm - new - roll diameter: 250 mm - Roll length: 500 mm - Roll bore: peripherally drilled - Single drives: variable friction ratio - Roller bearing: roller bearing with manual grease lubrication - Gap adjustment: hydraulic - new hydraulic unit for roller nip and emergency system - New rotary unions make Johnson-Fluiten - two adjustable guide plates to adjust the working range on the rollers. - Working range approx.: 100 to 460 mm - Roller gap, during the working phase 25 mm - tiltable guide plates made of nylon-polyethylene Material - Stainless steel tank - New saf ...
Key data: 210 mm, 305 mm, 5000 1/min
CNC Lathe Make: Gildemeister Model: CTX 200 Control: Heidenhain Pilot 1190 Year of manufacture 1996 Switch-on hours: approx. 38,000 h Specifications Circumferential diameter over bed 440 mm Circumferential diameter over carriage 210 mm Turning length 305 mm Bar passage 42 mm Speed 5000 rpm Turret 12 stations Tool holder 20 VDI Machine dimensions L x W x H 2800 x 1651 x 1771 mm Machine weight approx. 3000 kg Accessories: Various tool holders Collet chuck on main spindle Tailstock Documentation
Manufacturer: Tonello Model: Laser Blaze 250TN Year of Manufacture: 2011 aprox 1,4x1,4m garments, for denim fabrics Find more here - / Contact us at -
x-travel: 600 mm y-travel: 400 mm z-travel: 500 mm total power requirement: 6 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 380 mm, 575 mm, 5000 1/min
Smooth G control Travel X/Y/Z/W 230/100/625/575 mm Main spindle Max. speed 5,000 rpm Main spindle spindle nose A2-6 Sub-spindle Max. speed 6,000 rpm Sub-spindle spindle nose A2-5 16-cavity tool turret, VDI 16 driven tool stations 5.5 kW Max. speed ang. Tools: 5,000 rpm Toolsetter Parts catcher Full C-axis on main and counter spindle Cylinder interpolation Synch. Tapping Preparation Renishaw OMP Conveyor Interface for bar feeder 15 bar high pressure pump
VIET CHALLENGE 211B 1100mm calibrating machine with 2 belts: – 1st calibrating roller belt – 2nd sanding roller belt – pneumatic on/off of the rollers, from the control panel – cleaning blowers on both belts – 2620x1130mm abrasive belt development – belts with single motor 11 kW / 15 HP – rubberized pressure rollers – automatic table positioner, with digital reader – Advancement mat in good condition – variable belt feed speed – front and rear support roller conveyors Machine according to CE regulations
Vacuum homogenizing system Make Haagen & Rinau Type Unimix RU IV 200 Net capacity 200lt Stirrer with scraper 1500/300 rpm 3.7/4.4 KW Homogenizer 1500/300 rpm 2.0/2.4 KW Heating by steam double jacket, max 6bar
Key data: 2 mm, 8 kW, 40 mm
Panhans 245 Easy Swivel Spindle Milling Machine Brand: Panhans Type: T26 CNC M-No.: 245 Easy Year of Make: 2008 Control: 2-axis electric control, spindle height and inclination, 2-fold handwheel adjustment with digital readout stops together and right stop in offset Control panel: Eye level, Rotatable Motor power: 7.5 kW Swivel milling spindle: -45 tot + 45° Milling mandrel: ø40 mm with SK40 and mandrel fix quick coupler Height adjustment milling spindle: Electric height adjustment with fast and creep gear Adjustment range 150 mm Electro-pneumatic milling spindle locking mechanism Central lubrication with long-lasting grease Speed: Frequency controlled, with digital display, automatic brake, central lubrication Spindle holder: Mandrel snelwisselsysteem (pneumatic locking) Table size: Table widening on both sides, 2405mm with extendable support front Axis ...
used
Max stock diameter 20 mm Number of tool stations 30 Spindle speed 10.000 rpm Main Spindle Axes 4 Back Spindle Axes 4
Specifications Maximum pressure: 75 tons Year of Make: 1999 Press force: 90.9 t/m² Number of bindings: 4 vertical Channel cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1550 mm Bale weight: 500-750 kg Weight: approx. 25 tons Power connection: 400 V Bale tying: automatic Motor: 75 kW (possibility of switching to 55 or 45 kW) Press capacity at idle: max 750 m³ / hour Press capacity under operating conditions: max 350 m³ / hour Theoretical throughput to density 35 kg/m3: approx. 12 tons/hour Theoretical throughput to density 60 kg/m3: approx. 21 tons/hour Theoretical throughput to density 100 kg/m3: approx. 33 tons/hour Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the channel. Automatic binding with wire Cho ...
: 0460 mm : 270 mm : 1500 mm : 230 mm : 76 mm : 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
90 mm Extruders Machine, 2024 Model Gearbox: YRE2430XEİ: 18.67 Motor: Gamak brand, 30 kW, 1470 RPM Transmission: Belt / Pulley Overall Dimensions: 2700 mm / 1500 mm Production: Made in Turkey, 2024
EX-120 L/D:1600/90 Gearbox: Leyond Motor: Gamak, 37 kW, 1475 RPM TCU: None Control Panel: None Transmission: Belt - Pulley Overall Dimensions: 2700 x 1800 x 1500 mm Production: Made in ENGLAND
Eichinger 2041.10 waste box van; Volume 750L; Load capacity 300kg; tilting; on wheels. Waste box wagon Eichinger 2041.10; capacity 750L; lifting capacity 300kg; tiltable; with rolls.
maximum number of results exceeded
please refine your search
