sm 102 2 used for sale

Double Z mixer with discharge screw Type : UK 2000 AEL Manufacturer : Werner & Pfleiderer Volume : 2000 ltr. Material : Areas in contact with the product in stainless steel

Sumbel Enano 250 banding machine; cleaned and tested; Working width 250mm; suitable for cold glue; was overhauled in 2010. Gluing machine Sumbel Enano 250; cleaned and checked; woking width 250mm; used for cold glue; Rebuilt in 2010.

Stainless steel tanks Manufacturer: SAV Type 20062 Capacity 2260 litres Year of construction 2000 Operating temperature product room 95 °C Double jacket for heating and cooling, pressure-resistant up to 8 bar Material V4A

Key data: 550 mm

Max. saw length: 6,000 mm Smallest cutting length: 335 mm Max. saw blade diameter: 550 mm Automatic length positioning via E 255 control Swivel inside and outside 22.5° - 90° - 140° Tilt the angles between 45 and 90 degrees Digital Angle Displays Moving roller conveyor Minimum quantity spraying device

max. wheel diameter: 2800 mm gear width: - mm max. module: 20/30 min. module: Control: Siemens 840 D total power requirement: 40 kW weight of the machine ca.: 50 t The machine has only a few working hours and is like new. With internal milling head. Note: If you require an external milling head, we can offer it separately. - The price of the new machine of this caliber is 2.3 million Euro. - With minimal operating hours, the machine is essentially new. - It is one of Gleasons largest machines - It has the possibility of dry or wet milling, and internal and external gearing. - The machine underwent a comprehensive manufacturers inspection in July 2023 and is in impeccable working order. - Machine is currently partially assembled to allow potential buyers to verify all functionalities. If you wish to see the machine in operation, we have two identical machines running in our produc ...

max. dia. of grinding wheel: 200 mm grinding wheel width: 32 mm grinding wheel hole diameter: 51 mm turning speed range: 2900 U/min total power requirement: 0,9 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inverter heat pump. Very good condition. Was used for heating. Closed circuit. Glycol. Serviced. Power approx. 53 kW

Rheinmetall axle Verse No: 2520-12-341-1309 TKZ : 2300002-100 220 000

Grinding length 500 mm Grinding width 230 mm Table size 760 x 200 mm Automatic delivery Magnetic disk Filter system

We currently offer: Number 001 Generator set Type: IL 250-4 Engine Iveco Generator LeRoy Somer Power: 250 KVA Year of construction 2002 Hz 50 IP 23 AVR Regulator R448 Hours 299 Metrics: L: 5.10m H: 1.90m B: 1.00m Weight: 2800 kg Accessories: Control cabinet You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Manufacturer: Sysmex Model: CS 2500 Year of Manufacture: 2012 The CS-2500 is a fully automated, high-performance hemostasis analyzer designed for advanced laboratory needs. Utilizing multi-wavelength technology and PSI™ checks, it delivers precise results for coagulation, chromogenic, immunoturbidimetric, and aggregation testing—all in full random access. Compact and efficient, this benchtop system is an ideal solution for mid- to high-volume laboratories. Find more here - / Contact us at -

power capacity: 63 / 93 kW volt: 380 V ampere: 122 / 178 A weight of the machine ca.: 0,5 t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2000 mm y-travel: 620 mm z-travel: 520 mm control: Heidenhain TNC 530 CNC turning speed range - main spindle: max. 15000 min/-1 tool taper: BT 40 table clamping surface:: 2500 x 550 mm tool change unit: 30-fach connected load: 25 KVA weight: 10,5 t Dimensions (LxWxH): 8,0 x 2,6 x 2,75 m Vertical CNC Machining Center - 30-station tool changer - Handwheel - Chip conveyor - Belt filter system - Several SK40 tool holders The system can be dismantled to 2.45 m. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 660 mm, 1495 mm

Mazatrol Matrix Max. Rotary Diameter 660 mm Max. turning length 1,495 mm Travel X-axis: 580 mm Y-axis: 150 mm Z-axis: 1,545 mm W-axis: 1,490 mm B-axis -30 to 210° Rapid traverse X/Y/Z/W 50/40/50/30 m/min Main spindle Drive power: 22 kW Max. spindle speed 4,600 rpm C-axis Max. bar passage: 65 mm Sub-spindle Drive power: 18.5 kW Max. spindle speed 5,000 rpm C-axis Milling spindle Drive power: 18.5 kW Max. spindle speed: 12,000 rpm B-axis: 0.0001° Capto C6 Tool magazine / ATC 120 tool positions Max. tool diameter: 90/125 mm Max. tool length: 300 mm Max. tool weight: 10 kg lower turret Drum turret 9 tool stations 6 powered tool stations Max. speed: 6,000 rpm Special equipment Mayfran Consep 2000 II Chip Conveyor, Double Switching Filter Preparation IKZ 70 bar 70 bar high pressure pump Milling spindle synchronized threading Cyl ...

Description: Type : Oil Transformer Finish : Hermetic Make : SGB Year of construction : 2016 Condition : New Rated power : 4200 KVA Medium Voltage : 22KV +- 2X 2.5% Low voltage : 400 V Groupset : Dyn 5 Frequency : 50 Hz Cooling Type : ONAN Gross vehicle weight : 9030 kg Oil weight : 1940 kg DIALA S4 ZX-I Other sizes and voltages also available from 100 KVA to 3500 kva. All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery . Available for further questions Mon to Sat 8 a.m. to 10 p.m.

Key data: 250 mm

Kitagawa TT 250 HMM03 NC Rotary Tables Table diameter 250 mm Spindle bore Ø 70 mm Weight 260 kg If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Mesh bag packaging machine. Designed to handle PE mesh film to make pillow or gusset bags, suitable for packing fresh vegetable and fruits such as potatoes, onions, apples, cabbage, peas, carrots, pears, lemons, grapefruits, kiwi, etc. Full stainless steel version, PLC controller and touch screen. Print mark sensor. Suitable films: PE-Net, Net-film combinations, etc. Bag styles: pillow, gusset and gusset bag with handle holes. - Specifiations: film width: max. 1.000mm | bag length: 100-600mm | bag width: 240-490mm | max. speed of the machine in neutral: 14 cycles/minute | compressed air: 0.6m?/6bar | power: 220V, 5kW. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 diff ...

Pflugscharmischer, Fabr. Loedige, type: FKM 1200 D. 2 MZ, capacity 1200 ltr., usable capacity approx. 900 ltr., product contact stainless steel, double jacket for heating or cooling, max. 6 bar, 2 pcs cutter heads, mixer drive 22 kw., cutter head drive: 4 kw. each, 400 V. complete with control cabinet, frequency converter available, filling funnel available

Linear weigher and mixer for the mix of two different products - ideal e.g. for seeds, tea, cereals, nuts, sugar, salt, glutamate, rice, generally grainy, granular products. - Specifications: capacity weighing hopper: 15 L | weighing range: 1000-12000g | accuracy: +/- 10-20g | max. speed of the machine in neutral: 25 cycles/minute | power: 220V, 6A, 1.2kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Linear weigher and mixer for the mix of two different products - ideal e.g. for seeds, tea, cereals, nuts, sugar, salt, glutamate, rice, generally grainy, granular products. - Specifications: capacity weighing hopper: 3 L | weighing range: 50-2000g | accuracy: +/- 2-5g | max. speed of the machine in neutral: 55 cycles/minute | power: 220V, 6A, 1.2kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Linear weigher and mixer for the mix of two different products - ideal e.g. for seeds, tea, cereals, nuts, sugar, salt, glutamate, rice, generally grainy, granular products. - Specifications: capacity weighing hopper: 4.5 L | weighing range: 50-3000g | accuracy: +/- 2-5g | max. speed of the machine in neutral: 30 cycles/minute | power: 220V, 6A, 1.2kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Linear weigher with 100g up to 5000g weighing range. Weighing/dosing of granular and chunky products. 2 weighing heads with load cells and 3 vibrating feeders allow fast and precision weighing. - Specifications: capacity weighing hopper: 8 L | number of weighing heads: 2 | weighing range: 100-5000g | accuracy: +/- 1-3g | max. speed of the machine in neutral: 20 cycles/minute | power: 220V, 1-phase | stainless steel version SUS 304. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are pos ...

Linear weigher with 100g up to 10,000g weighing range. Weighing/dosing of granular and chunky products. 2 weighing heads with load cells and 2 vibrating feeders allow fast and precision weighing. - Specifications: capacity weighing hopper: 20 L | number of weighing heads: 2 | weighing range: 100-10,000g | accuracy: +/- 1-25g | max. speed of the machine in neutral: 20 cycles/minute | power: 220V, 1-phase | stainless steel version SUS 304. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo a ...

Linear weigher with 100g up to 3000g weighing range. Weighing/dosing of granular and chunky products. 2 weighing heads with load cells and 3 vibrating feeders allow fast and precision weighing. - Specifications: capacity weighing hopper: 5 L | number of weighing heads: 2 | weighing range: 100-3000g | accuracy: +/- 1-3g | max. speed of the machine in neutral: 20 cycles/minute | power: 220V, 1-phase | stainless steel version SUS 304. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are pos ...

Weighing unit with 2 heads. Max. weighing of 1.000g/1 liter (depending on product). - Specifications: accuracy 0.5-1.0g | 220V/1kW | max. speed of the machine in neutral: 25 cycles/minute. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Weighing unit with 2 heads. Max. weighing of 2.500g/2.5 liter (depending on product). - Specifications: accuracy 2-5g | 220V/1kW | max. speed of the machine in neutral: 25 cycles/minute. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Very large linear weigher for high volume weighing with 2 heads. - Specifications: weighing range: 5-50kg | max. speed of the machine in neutral: 20 cycles/minute | accuracy: 0.2% (depending on product) | power: 2.0kW | machine dimensions: L3300xW3000xH4700mm (including 1400mm standing frame/can be customized) | weight: 1800kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Very large linear weigher for high volume weighing with 2 heads. - Specifications: weighing range: 3-30kg | max. speed of the machine in neutral: 20 cycles/minute | accuracy: 0.2% (depending on product) | power: 2.0kW, machine dimensions: L3100xW2800xH3600mm (including 1400mm standing frame/can be customized) | weight: 1200kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Very large linear weigher for high volume weighing with 1 head. - Specifications: weighing range: 5-25kg | max. speed of the machine in neutral: 10 cycles/minute | accuracy: 0.2% (depending on product) | power: 2.0kW | machine dimensions: L3000xW2800xH4200mm (including 1400mm standing frame/can be customized) | weight: 1500kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Linear weigher with spiral conveyor for sliced or pulled meat such as gyros, kebabs, pulled pork, or also minced meat, fresh/humid fruits, fresh vegetables, etc. Weighing range: 10-3000g. 2 weighing heads with load cells allow fast and precision weighing. - Specifications: capacity weighing hopper: 5 L | number of weighing heads: 2 | weighing range: 10-3000g | accuracy: +/- 1-10g | max. speed of the machine in neutral: 20 cycles/minute | power: 220V, 1-phase | touch screen control | stainless steel version SUS 304. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times f ...

Weighing unit with 24 weighing heads for very precise weighing, with 1 Liter volume each. Special design for weighing 4 or 6 different products simultaneously and then merging them or to weigh one product in high speed. Optional for extra charge: CAN bus protocol for higher speed. - Specifications: max. speed of the machine in neutral: 50 cycles/minute (with 4 - 6 products simultaneously) | weight range per product for 6 products: 1-200g | accuracy +/- 0.5-1.5g | PLC controlled, operating via 10 Touchscreen (operation menu in English) | stainless steel 304 | IP65 | 220V/2,5kW, 15A | machine dimensions: L2630xW1700xH1815mm | weight: 1200kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task ...

Weighing unit with 24 (2x12) weighing heads for very precise weigh checking, with 1.0-Liter volume each. Special design to mix two different products or to weigh one product in high speed - Specifications: max. speed of the machine in neutral: 150 (or 2x60) cycles/minute | weighing range: 10-1000g | accuracy: +/-0.1-2.0g | touchscreen (large version) operation | stainless steel | 220V, 3kW | L2176xW1456xH1483 | 1000/1100kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - ...

Weighing unit with 24 weighing heads for very precise weighing, with 0.8 Liter volume each. Special design to mix up to four different products or to weigh one product in high speed. - Specifications: max. speed of the machine in neutral: 220 cycles/minute (when one product is processed, and depending on product). Weighing range 2-500g, Accuracy +/-1g, 10.4 inch Touchscreen (operation menu in three languages). - Stainless steel, IP64 (upgrade to IP65 possible, for additional costs) 220V/4kW, L2136xW1456xH1433mm, 1100kg. Deviations from the sample image are possible. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from sto ...

Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for premade plastic tubes with closed cap. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 50 cycles/minu ...

Fully automatic twist-off lid capping machine for bottles and containers. The sealing machine is equipped with a vacuum device for a longer shelf life of your products. With two twist-off heads the rotary capper closes the lids quickly with 5-20 NM. Conveyor belts (infeed and outfeed of containers/bottles) for integration into the packaging line are included. - Specifications max. speed of the machine in neutral: 17 cycles/minute (corresponds to max. 35 bottles/container per minute) | conveyor belt speed can be adjusted accordingly: 0-15m/min | bottle diameter: two ranges: a) 30-85mm, b) 80-150mm | lid diameter: customized | adjustable height of the twist off heads: 50-180mm | vacuum degree: -85kpa | materials used: mainly stainless steel 304 | protective screens and links of the conveyor belt are made of plastic | machine dimensions: L1800xW660xH1700mm | weight: 650kg. The machine phot ...

Automatic liquid filling and capping system. Suitable for various liquids and oils from the food industry (water, juices, liqueurs, olive oil, sunflower oil, etc.) as well as from non-food (perfumes, cosmetic oils, detergents, etc.). The liquid filling system has 2 filling heads moving in vertical and horizontal direction, which allow continuous filling and thus a higher number of cycles. Automatic detection of the position of the bottles and of the neck diameter of the lid. The Advantage is less adjustment work and sensor settings (within a certain range) have to be carried out. The change to different bottle dimensions is considerably facilitated, which ultimately results in lower machine downtime due to the time savings. Easy adjustment to different bottle width and height without the need for additional format sets. After filling, the bottles are conveyed by a conveyor belt to the au ...

Automatic weighing unit for granulate like products (chemicals, food, sugar, coffe, detergents, etc.) into bottles, cans or similar. Including hopper, vibrating feeder, weighing unit, housing to minimize dust, rack and conveyor. - Specifications: stainless steel version (SS304) | 2 head weigher each with weighing range of 10-2000g | Accuracy:

Economical blister machine with a quick format change unit for more flexibility. Universal feeder for handling of almost all types such as capsules, flat tablets, oval tablets, capsule tablets, triangular tablets or other various shapes. Adjustable sealing pressure for different product requirements. The machine is additionally equipped with a film waste material trimming cutting device which allows production runs of approximately 90 minutes. Integrated camera inspection systems (pinhole detector, BASLER color camera) automatically eject defective blisters and ensure the quality of the blister packs. Two holding devices for two blister film rolls and the integrated blister film splicer increase efficiency during material changeover. The length of the final blister is adjustable by software. Including water chiller system, 1 x aluminum format set with dedicated feeder, aluminum/PVC forma ...

Vertical packaging machine for forming and sealing pillow bags and gusseted stand-up pouches (gusset tool needed). Equipped with: quick change former assembly | SIEMENS PLC | WEINVIEW touch screen | eye mark sensor for seal/cutting position | servo driven sealing unit for end sealing | servo motor for film pulling | ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 60 cycles/min | bag sizes: L(60-500)xW(120-410)mm (double film pulling L = 800mm), gusseted stand-up pouches: L(60-500)xW(100-350)xD(40-150)mm (double film pulling L = 800mm) | suitable film width: 260-850mm | product contact parts from: AISI 304 (optional for surcharge AISI 316) | power supply: 220V, 50/60Hz | power consumption: 8.0kW | air pressure: 0.7MPa | compressed air consumption: 0.25-0.40m?/min | weight: 770kg. Please note that our new prices are often bel ...

Vertical packaging machine for forming and sealing pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). The packaging machine is equipped with: touch screen operating interface | plc | eye mark sensor for seal/cutting position | pneumatic sealing unit for end sealing | servo motor for film pulling | ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 40 cycles/min | bag sizes: L(40-600)xW(115-400)mm, (double film pulling possible for longer bags) | suitable film width: 200-820mm | product contact parts from: AISI 304 (optional for surcharge AISI 316) | power supply: 220V, 50/60Hz | power consumption: 4.2kW | air pressure: 0.2-0.8MPa | compressed air consumption: 1.0m?/min | dimensions (LxWxH): 238516301950mm | weight: 980kg. Please note tha ...

X-ray detector for food and other (e.g. medical, chemical, textile) products in packaging (non-metallic or metallic, even cans), flexible setting of detector head, suitable for detecting small products and specials applications. With protective device. - Specifications: detecting speed: 0.17-0.46m/sec | detecting accuracy: FE from ? 0.8mm, SUS from ? 0.8mm | tunnel size WxH: 230x120mm | max. passing size WxH: 230x120mm | power: 220V/1kW | dimensions and weight: L1230xW795xH1600mm, 800/900kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

High-speed Metal Detector for the use in high-speed production lines, stainless steel framework, touch screen. - Specifications: detecting speed 0.2-1.7m/sec | detecting accuracy: FE from ? 0.8mm, SUS from ? 1.8mm | tunnel size WxH: 300x120mm | max. passing size WxH: 250x80mm | power: 220V/0.3kW, 50Hz/60Hz | dimensions and weight: L1505xW600xH890mm, 150/250kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Metal Detector for food and other (e.g. medical, chemical, textile) products, also suitable for wet products, stainless steel framework, touch screen, easy integration into existing production line. - Specifications: weight of the product: max. 50kg | detecting speed: 0.5m/sec | detecting accuracy: FE from ? 1.5mm, SUS from ? 2.5mm | tunnel size WxH: 450x250mm | max. passing size WxH: 410x210mm | power: 220V/0.45kW, 50Hz/60Hz | dimensions and weight: L1800xW800xH950mm, 180/280kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Metal Detector for food and other (e.g. medical, chemical, textile) products, also suitable for wet products, stainless steel framework, touch screen, easy integration into existing production line. - Specifications: weight of the product: max. 5kg | detecting speed: 0.5m/sec | detecting accuracy: FE from ? 1.5mm, SUS from ? 2.0mm | tunnel size WxH: 125x250mm | max. passing size WxH: 100x215mm | power: 220V/0.3kW, 50Hz/60Hz | dimensions and weight: L1627xW528xH1420mm, 110/210kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Vertical weighing and filling system for pre-made large bags/sacks. Suitable for granular products such as seeds, pet food, wood pellets etc. The system includes product feed, automatic weighing unit, conveyor belt and sealing OR sewing module. The pre-made bags are manually clamped into the pneumatic clamp support by hand. The product is dosed by weight and filled into the bag. The bag is then by conveyor belt to the sealing or sewing module for sealing or sewing. - Specifications: Weight range: up to max. 25kg | max. speed of the machine in neutral: 200 bags/hour | accuracy: ?0.2% FS | power: AC 220V/380V, 50Hz, 2kW | compressed air: 6bar, 0.17 m? | product contact parts are made of AISI 304 stainless steel | dimensions of the system depend on the final layout, can be customized. That machine/system is available in different versions for different packaging sizes and with different pac ...

Vertical filling machine for liquids into 3-side-seal- or pillow-bags. Including liquid dosing device (for high viscosity liquids). Twin filling layout for high capacity. Can be linked to CIP system to have an automatic circulating system to guarantee clean feeding pipes. The packaging material is sterilized by UV lights inside the machine to assure a clean environment for the packaging material and the liquid product. Contamination of the liquid product can be reduced during the packaging process to have a longer shelf life. - Specifications: max. speed of the machine in neutral: 100 cycles/minute | suitable for volumes from 200-1000ml | accuracy: +/- 1.5% | max. film width: 320mm | bag width: 100-160mm (depending on pouch type) | bag length: 95-165mm | 0.7m?, 6bar | 380V, 3.9kW | machine dimensions: 1700x1100x2950mm | weight: 720kg. That machine/system is available in different version ...

Vertical packaging machine including dosing system(s) with 4 manufacturing lanes to produce stick-packs with back center sealing (alternativ: with 3-/4-side seal - surcharge applies) to pack powder (pepper, milkpowder, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), auger filler with servo motor, with hopper. - Specifications: accuracy: +/-0,3-1% | max. speed of the machine in neutral: 4x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-100)mm | power: 220V, 3.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1500xW1300xH1900mm | weight: 450kg. That machine/system is available in different versions for different packaging sizes and with different packagin ...

Vertical packaging machine including dosing system(s) with 4 manufacturing lanes to produce stick-packs with back center sealing (alternativ: with 3-/4-side seal - surcharge applies) to pack normal liquids (water, vinegar, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), piston Pump with 60 liter hopper. - Specifications: max. speed of the machine in neutral: 4x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-100)mm | power: 220V, 3.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1500xW1300xH1900mm | weight: 450kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that o ...

Vertical packaging machine including dosing system(s) with 4 manufacturing lanes to produce stick-packs with back center sealing (alternativ: with 3-/4-side seal - surcharge applies) to pack granules (sugar, salt, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), swing cup volume filling device for granules. - Specifications: max. speed of the machine in neutral: 4x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-100)mm | power: 220V, 3.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1500xW1300xH1900mm | weight: 450kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note tha ...

Sidesleever for thick PE films, that can do full wrapping of the product. All 4 sides are properly sealed. XL version for large products, inclusive suitable shrink tunnel. Suitable for dust protection and transport purposes. Low cost packaging solution even for large products of up to W+H