sm 102 2 used for sale

Capacity: 200l, pouring height: 600mm, boiler diameter: 694mm, boiling time: 33min, connected load: 37kW, fuse protection: 3x 63A, protection class: IPX5, length: 1300mm, width: 850mm, height: 920mm, weight: 235kg. Electrically tiltable, heating type: electric, cover: double-walled. On-site inspection is possible.

grinding wheel diameter: - mm power requirement: 1 kW total power requirement: 1 kW weight of the machine ca.: 0,16 t dimensions of the machine ca.: 1,20,81,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Containex shower container including water boiler Austria Email is available. 1) Container Containex 20ft S, year of construction: 1994, length: 20 feet (approx. 6096mm), equipment: shower cubicles, washbasin, urinal, window. 2) Water boiler Austria Email (Havel Therm) VS-300-EU, volume: 300l, operating pressure: 10bar, test pressure: 15bar, max. operating temperature: 95°C, max. heat output: 150kW, heating time 6kW/4kW/3kW: 4h/6h/8h. Suitable for drinking water. Documentation available. On-site inspection is possible.

A Bosch low-pressure steam boiler is available. Total volume: 2480l, max. permissible pressure: 0.5bar, test pressure: 2bar, max. permissible temperature: 110°C, steam output: 1400kg/h, insulation thickness: 100mm. Machine dimensions X/Y/Z: approx. 2850mm/3800mm/3350mm, weight: approx. 3350kg. Documentation available. On-site inspection is possible.

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm Control: Heidenhain TNC 113 total power requirement: 4 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 222 m No. 5152 Universal tool milling machine Deckel FP 4 M (K) - 2203 Working area: 500 x 400 x 400 Drive: 4 kW Spindle holder SK 40 / DIN-2080 Speed range 50 - 2,500 min-1 Feed rates 8-630 mm/min stepless Rapid traverse 1.3 m/min Fixed table 800 x 460 mm Chip tray Heidenhain TNC 113 Active Digital readout Space requirement approx. 2 x 2 x 2m Weight approx. 1,500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Switching group: Dyn5, cooling type: ONAN, short-circuit voltage: 4.2%, short-circuit losses: 3883W, no-load losses: 394W, winding temperature: 65K, oil quantity: 327kg, oil temperature: 60K, oil type: Nytro Taurus, loss class: AoBK, winding material: aluminum, machine dimensions X/Y/Z: approx. 1150mm/850mm/1300mm, total weight: approx. 1650kg. Documentation available. On-site inspection is possible.

surface area: 430 x 710 mm no. of flutes: 5 groove width: ? mm table length: 710 mm table width: 430 mm table load: 200 kg weight of the machine ca.: 250 kg dimensions of the machine ca.: 800600700 m No. 5304 Universal table DECKEL 2038 - 500 / FP 3 + 4 Rotation range 360 Tilting range from/to machine 45/15° Swivelling range right/left +/- 45 Transport dimensions approx. 800 x 600 x 700 mm Weight approx. 250 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 800 600 mm table load: 0,25 t table height: - mm total power requirement: 3 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 1,1 x 0,8 x 0,8 m No. 4926 NC rotary table for inclined bed machines DECKEL 2238 002600 / passend zu FP 41 / FP 42 Working area: Table Ø 800 x 600 Control: Axis card for Dialogue 4 Table load approx. 250 kg Clamping grooves 16H7 Dead weight approx. 280kg Space requirement / transport dimensions approx. 1100 x 750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Two unused Allweiler and KSB pumps are available. 1) Thermal oil centrifugal pump Allweiler NIT 50-200U5 AW4, year of manufacture: 2023, flow rate: 40m³/h, delivery head: 54m, power: 7.4kW, speed: 2900rpm, pumped medium density: 0.75kg/dm³, viscosity: 1mm²/s, pipe diameter: 203mm. 2) Reconditioned cooling water pump KSB Etabloc, year of construction: 2021, flow rate: 26m³/h, delivery head: 15.5m, viscosity: 1mm²/s, speed: 2915rpm, MEI: 0.7, pipe diameter: 116mm. The KSB pump was overhauled in 2023. Documentation available. On-site inspection is possible.

One air shower is available. Two identical air showers with glass inlet and outlet doors and one air shower with glass inlet door and fire protection outlet door (fire protection door). Insulation class: 54, motor power: 40kW, machine dimensions X/Y/Z: approx. 1100mm/1100mm/2950mm. On-site inspection is possible.

grinding wheel diameter: ? mm power requirement: 1 kW total power requirement: 1 kW weight of the machine ca.: ? t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An Aristo plotter equipped for solid and corrugated board with Multihead OT.T.M.P. II-2 is available. Working width: 2000mm, working length: 3200mm, static repeat accuracy: +/-0.08mm, max. speed: 2.3m/s, max. acceleration: 2G, max. material passage height: 55mm, vacuum pump power: 5.5kW. Machine dimensions X/Y/Z: approx. 2700mm/4250mm/1100mm. Documentation available. On-site inspection is possible.

bore capacity in steel (diameter): 55 mm arm length: 2500 mm workpiece height max.: - mm total power requirement: 8 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 4 x 1 x 3 m Radial drilling machine MK 5 Spindle holder MK 5 Speed range 30 - 1500 min-1 Feed rates 0.05 - 0.6 mm/rev Space requirement approx. 3.7 x 1 x 3 m Weight approx. 5 tonnes (estimated) Working range: MK 5 x 2500 Drive: 3.7 / 6 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A PCB destacker (PCB feeder) for the semiconductor industry is available. Transfer height: 950mm, transfer height adjustment: +/-25mm, belt speed: 12m/min, PCB edge support: 3mm, component clearance (bypass mode) top/bottom: 30mm/30mm, PCB thickness range: 0.6mm-4mm, PCB length range: 80mm-460mm, PCB width range: 75mm-460mm, max. PCB stacking height: 220mm, machine dimensions X/Y/Z: approx. 700mm/1000mm/1300mm, weight: approx. 200kg. Documentation available. On-site inspection is possible.

A Memmert universal oven and a Binder climate chamber are available. 1) Memmert UM 500, temperature range: 30°C-200°C, volume: 108l, internal dimensions X/Y/Z: 560mm/480mm/400mm, external dimensions X/Y/Z: 710mm/760mm/550mm. 2) Binder KBF 240, temperature range: 0°C-100°C, volume: 240l, output: 2.2kW, max. operating pressure: 15bar, refrigerant: R134a, internal dimensions X/Y/Z: 800mm/600mm/500mm, external dimensions X/Y/Z: approx. 1050mm/1150mm/750mm. Documentation available. On-site inspection is possible.

current capacity: - kVA throat: - mm contact pressure capacity: - kp total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m No. 1244 CNC portal spot welding machine PEI PROG-2515 Working area: 2500 x 1500 Siemens control Welding capacity of the butt spot welder 3+3 mm Welding capacity of the gun 2+2 mm Feed rates: X+Y 800 mm/sec, Z: 400 mm/sec, A 120°/sec. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mm plate thickness: 3 mm distance between columns: 2540 mm total power requirement: 9 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: 3,5 x 3,5 x 2 m No. 5120 Swivel bending machine FASTI 212 Working area: 2500 x 3 Sheet support behind the machine Space requirement approx. 4 x 4 (2) x 2 m Weight approx. 5.7 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 50 mm square edge steel: 45 mm L-beam: 150 x 14 mm total power requirement: 4 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,3 x 1 x 2,1 m No. 3418 5-fold combined profile steel shears with flat steel shears PEDDINGHAUS 210 Super 16 pressure capacity 80 to Round steel 50 mm Square steel 45 mm angle steel 150 x 14 mm Punching up to 90 mm diameter 5.5 HP Space requirement 2.30 x 1.0 x 2.1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 t distance between columns: 600 mm stroke: - mm total power requirement: 22 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 2 x 2 x 3,2 m No. 3421 Mould press 2500 / 700 kN Single stroke 2-hand Single stroke foot switch Automatic continuous run set-up and tipping Table 500 x 500 Working range: Pressure capacity 250 tonnes Drive: ^22 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

volume capacity: max. 2250 m³/h : 2550 pa power capacity: 2,2 kW Suction- Tube: 250 mm Number of working hours: 1450 h power requirement: 2,2 kW Packing: ca. 1200 x 900 x 1600 mm Shipping weight: 250 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 50 / 65 kW volt: 220 V ampere: 181/230 A weight of the machine ca.: ? t dimensions of the machine ca.: ? m (passend für Kutter MEISSNER RSM 200) n 1460/2940 min-1, iP 23 Temperature sensor for motor protection + tropically insulated The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1200 mm y-travel: 400 mm z-travel: 400 mm total power requirement: 5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 3 x 2 x 2 m No. 4427 Universal tool milling machine DECKEL FP 4 L / 2707 Working area: 1200 x 400 Fixed angle table Control: 3-axis digital display Weight approx. 3.5 tons Space requirement 3 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

surface area: 260 x 600 mm no. of flutes: 5 groove width: 12 mm total power requirement: 0 kW weight of the machine ca.: 0,06 t dimensions of the machine ca.: - m Swiveling angle table Workspace: clamping surface 260x 600 Control: permissible load 200 kg / own weight 60 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 710 mm y-travel: 600 mm z-travel: 455 mm Control: Dialog 11 total power requirement: 7,5 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 4 x 3,5 x 2,5 m No. 4430 Universal tool milling machine Working area: 710 x 600 x 455 mm Drive: 7.5 Control: Dialog-11 control Spindle holder SK 40 Speed range up to 6,300 Fixed table Cabin Coolant container Space requirement see data sheet Weight approx. 5 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 220 mm z-travel: 400 mm Control: Dialog 2 total power requirement: 1,6 / 2 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,5 x 2,5 x 2,2 m No. 5290 Universal tool milling machine DECKEL FP 2 NC / 2801 Working area: 300 x 220 x 400 Drive: 1.6/2 kW Control: Dialog 2 contouring control Fixed table with chip tray Spindle SK 40 Speed range up to 3150 min-1 Quill stroke 65 + 60 mm Space requirement c.3 x 3.5 m Transport dimensions approx. 2 loading meters Weight approx. 1300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 300 mm z-travel: 400 mm total power requirement: 3 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 2,52,52 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3000 mm y-travel: 4000 mm z-travel: 1500 mm Control: Heidenhain TNC 430 M total power requirement: 120 kVA weight of the machine ca.: 83,2 t dimensions of the machine ca.: m 3/5 axes CNC portal milling machine with integrated C-axis and changeable milling heads. The machine had a purchase price of € 1.4 million in 2002. An inspection in the sellers plant under power is possible after previous appointment. Condition: The machine was overhauled in 2018, costs of over € 100.000,-. - Drives of the X-axis renewed - New hydraulic power unit - Complete electrical wiring renewed - Spindle cooling unit new - 2 pieces longitudinal conveyors new - Coolant pump new - Cover complete X-axis new - Bellows Y-axis new - Exchange measuring ruler X-axis - Fork head spindle bearing new Belleville spring assembly new Drive motor A-axis new Spindle cone ground - Overhaul milling gear (2020) Work ...

table length: 2400 mm table width: 1200 mm table height: 200 mm weight of the machine ca.: 913 kg 280030.XD7D - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Sidewall made of high quality steel S355J2+N + plasma nitriding - Bore Ø 28 mm - Holes surface in diagonal grid - Rounded corners, edges and holes - Side panel height 200 mm - Holes in the side wall in the diagonal grid - Including scaling on the surface - Structure reinforced with ribs - Grid lines enable precise build-ups Including 4x feet basic equipment 650 item no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 6,2 t chamfer lenght: 285 mm mm distance between columns: 230 mm dayligth: 215 mm throat: 70 mm stroke: 100 mm working feed: 9,8 mm/sec return speed: 50 mm/sec quantity of oil: 10 l Control: DELEM DA 41T total power requirement: 0,7 kW weight of the machine ca.: 250 kg dimensions: 900 x 1300 x 550 mm • Basic version as a C-frame • Compact table model • Ideal for prototypes and small series • Very short setup time • Functionally simple • Wide range of applications • Low noise level • Low energy consumption • Easy handling including special equipment: - CNC control DELEM DA 41T The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 240 mm saw band length: 2730 mm cutting width: 270 mm cutting speed: 37 + 74 m/min dimensions of saw-band: 2730 x 27 x 0,90 mm : 240 mm : 230 mm : 270 x 230 mm : 210 mm : 200 mm : 200 x 210 mm : 130 mm : 130 mm : 130 x 160 mm total power requirement: 1,2 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 1,6 x 1 x 1,7 m high-quality processed metal band saw with 2 band speeds, miter up to 60°, automatic cooling and AutoCut feed system - for sawing solid material and profiles execution High-quality processed and equipped metal band saw for saw cuts best quality For sawing solid material and profiles made of steel, stainless steel and aluminium Miter cuts up to 60 degrees left Saw band speed adjustable in 2 stages Frame and gearbox made from one piece, very quiet and low-vibration cut Easy, clear miter adjustment with scale Quick release vice with  ...

cutting diameter: 220 mm saw band length: 2450 mm cutting width: 250 mm cutting speed: 40 / 80 m/min dimensions of saw-band: 2450 x 27 x 0,9 mm : 100 mm : 90 mm : 90 x 90 mm : 160 mm : 160 x 110 mm : 250 x 190 mm total power requirement: 0,75 / 1,1 kW table height: 925 mm weight of the machine ca.: 218 kg dimensions of the machine ca.: 1300 x 700 x 1530 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 2000 mm Working width: 600 mm Wheel width: 600 mm roll diameter: 90 mm number of rolls: 8 Stck. work height max.: 660 - 815 mm Colour: blau / rot weight: 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 200 mm weight of the machine ca.: 1,0 t The table Professional Extreme Article no. 4-280030.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4000 mm y-travel: 2000 mm z-travel: mm : 4000 bar total power requirement: 35 kW weight of the machine ca.: t dimensions of the machine ca.: m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC ...

: 2000 mm Working width: 400 mm Wheel width: 400 mm roll diameter: 60 mm number of rolls: 8 Stck. work height max.: 810 - 910 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 28 mm wall strength: 2 mm bending radius min.: 90 ° Control: 3D TubeSoft Slim total power requirement: 3,5 kW weight of the machine ca.: - kg dimensions of the machine ca.: - mm Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

carrying capacity: 250 kg number of suction cups: 6 suction cup dia.: 215 mm Vacuum lifter VH 6-250 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. is routed to the lifting device nex ...

plate thickness: 6 mm pressure: 12 t cutting range: Breite x Länge 200 mm no. of strokes: 15 Hub/min cutting angle: 30 - 140 ° total power requirement: 4 kW weight of the machine ca.: 1,02 t dimensions of the machine ca.: 1065 x 900 x 1210 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 255 mm saw band length: 2765 x 27 x 0,9 mm table height: 950 mm : 18-110 m/min : 255 mm capacity 90 degrees: square: 240 mm capacity 90 degrees: flat: 300 x 180 mm capacity 45 degrees: round: 210 mm capacity 45 degrees: square: 190 mm capacity 45 degrees: flat: 200 x 160 mm capacity 60 degrees: round: 135 mm capacity 60 degrees: square: 110 mm capacity 60 degrees: flat: 130 x 100 mm capacity 45 degrees: round: rechts 180 mm capacity 45 degrees: square: rechts 160 mm capacity 45 degrees: flat: rechts 180 x 100 mm : 1,5/1,8 kW : 350 kg : 1700 x 900 x 2000 mm Manufacturer no. 20437 Description: - Miter cuts left 60° and right 45° - Quick-action clamping stick can be moved in the T-slot for quick position changes - Hydraulic brake cylinder - Large ball-bearing turntable for easy miter adjustment (durable) - Chip clearing brush - Machine base with automatic cooling system  ...

x-travel: 2000 mm y-travel: 920 mm z-travel: 900 mm table surface area: 2200 x 750 mm table load: 3 t number of T-slots: 6 T - slots - width: 18 mm T - slots distance: 120 mm spindle taper: ISO 50 DIN 69871-B spindle speed max.: 3000 U/min transmission ratio: 1 speeds infinitely variable range 1: 60 - 3000 U/min weight of the machine ca.: 21,6 t feeds longditudinal/cross/vertical: 0 - 5000 mm/min rapid traverse: 15000 mm/min total power requirement: 38 kw weight of the machine ca.: 11 t Pull studs DIN69872-B | IKZ Hours: Control on: 43036 h Machine on: 41311 h Program run 13894 h The machine is already dismantled The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 1200 kg workpiece diameter: 20 - 800 mm total power requirement: 0,75 kW traversing speed: 80 - 1600 mm/min weight of the machine ca.: 56 kg range L-W-H: 520 x 470 x 390 mm - For machining cylindrical workpieces - Flat frame - Castors with polyurethane coating - Clear controls - Infinitely variable speed - The control electronics are of a robust and closed housing protected - With foot switch for start/stop - Drive with DC electric motors and gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t stroke: 400 mm table surface area: Arbeitsbreite 1300 mm pressure: 243 bar oil volume: 64 dm³ ajustment speed: 5,73 mm/sec work speed: 1,84 mm/sec return speed: 7,08 mm/sec total power requirement: 3,0 kW weight of the machine ca.: 1690 kg Inner diameter of the cylinder [mm]: 320 Piston rod diameter [mm]: 140 Diameter piston crown [mm]: 175 - adjustable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work - with digital display This 200 ton hydraulic press is equipped with a movable cylinder (left- right), a height-adjustable work table, a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing fitted. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Mitsubishi Area of application: Production of chassis components made of cast iron in batches Nodular graphite in one clamping position, production of large series or largerones. Quantities, current cycle time

table length: 2400 mm table width: 1200 mm table height: 200 mm weight of the machine ca.: 1,0 t The table Professional 750 Article no. 4-280030.PD 2400x1200x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 2000 mm Working width: 600 mm Wheel width: 600 mm roll diameter: 90 mm number of rolls: 8 Stck. work height max.: 800 - 950 mm Colour: blau / rot weight: 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: MAZAK Mazatrol 640T Nexus swing over bed: 610 mm swing diameter over bed slide: 350 mm turning length: 982 mm c-axis: indexing: 0.001 ° turning speeds: 4000 U/min tool taper: ASA A2-8 tailstock quill taper MT: 5 rapid traverse X-axis: 30 m/min rapid traverse Z-axis: 33 m/min Overall size: 4500 x 2000 x 1600 mm weight of the machine ca.: 6.5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mm centre height: 195 mm turning diameter over slide rest: 246 mm turning length: 650 mm spindle turning speed - stepless: 0-2500 U/min total power requirement: 7,5 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2x1.3x1.6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2000 mm y-travel: 550 mm z-travel: 560 mm weight of the machine ca.: 10 t dimensions of the machine ca.: 5.5 x 3.2 x 3.1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: 2-40 mm drilling length: x mm lip angle: 40-180 ° weight of the machine ca.: 0.4 t Dressing device Point thinning attachment More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 550 mm y-travel: 410 mm z-travel: 450 mm b-axis: +110/-110 ° spindle turning speed range: -15000 U/min spindle taper: BT Big Plus 40 tool change unit: 40x size of pallet: 2x D-250 mm weight of the machine ca.: 8.6 t 5 axes machining center FANUC G-Tech 30i Coolant through spindle 3D measuring probe Tool measuring device Misc pallets Misc tool holders More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.