sm 102 2 used for sale

TBA 19 machines have been developed for the filling of compact formats. The 250 milliliter Slim format is one of the most requested volumes. In this format, the system is used for many types of products. Before and during the repair work, we constantly check the condition of all existing parts and, if necessary, replace them before reassembling the machine. After extensive work in our workshop, we test all machine components intensively. Our aim here is the smooth interaction of all machine groups up to the finished product. These tests at the end of the technical work are particularly important for the later use of the machine. We can find existing errors in the system and fix them before the next production use. TBA 19 machines are available in different development stages. We will be happy to explain the extensive steps to make the system operational again for you. On request, we ca ...

capacity 90 degrees: round: 110 mm capacity 90 degrees: flat: 255x160 mm capacity 90 degrees: square: 210x210 mm capacity 45 degrees: round: 160 mm capacity 45 degrees: flat: 165x110 mm cutting range 45 degree right side: square: 150x150 mm cutting speed: 11/13/17/22/26/34 m/min stroke speeds: 50/64/82/100/128/164 Hübe/min dimensions of saw-blade: 400x36x2 mm power requirement: 1,8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stainless steel tanks Manufacturer: Becker Tankbau Capacity 14.250 litres Cylindrical stainless steel container, single-walled, no agitator Diameter 2.40 m, total height approx. 4.10 m

Steam generator Manufacturer Beckermesser Type BM 2090 Operating pressure 4 bar Boiler heating 9 kW/h Steam capacity approx. 13.5 Kg/h Water capacity approx. 9.8 litres Documents available

TBA 19 machines have been developed for the filling of compact formats. The 250 milliliter base format is one of the most requested volumes. In this format, the system is used for many types of products. Before and during the repair work, we constantly check the condition of all existing parts and, if necessary, replace them before reassembling the machine. After extensive work in our workshop, we test all machine components intensively. Our aim here is the smooth interaction of all machine groups up to the finished product. These tests at the end of the technical work are particularly important for the later use of the machine. We can find existing errors in the system and fix them before the next production use. TBA 19 machines are available in different development stages. We will be happy to explain the extensive steps to make the system operational again for you. On request, we can  ...

Designed as a machine for smaller formats, the 19 200 Base is capable of producing 7500 packs per hour. It is suitable for filling different products. Preferably, aseptic products are filled in the machine, which are previously fed into the filling line via a UHT or a pastorizer for preservation. Subsequently, it is possible to equip the filling machine with different downstream equipment. You are welcome to contact us to find the right selection for your requirements. We are also happy to support you in the planning and implementation of the necessary conveyor belt systems to connect the individual machines as a line. All machines undergo extensive technical work before they are put back into operation, which we always carry out in our workshop. In the end, there are always tests to be fully verified. These tests guarantee the perfect condition of the machine for the customer. On reques ...

Steam generator Manufacturer Beckermesser Type BM 2090 Operating pressure 4 bar Boiler heating 9 kW/h Steam capacity approx. 13.5 Kg/h Water capacity approx. 9.8 litres Documents available

Used stationary dissolver made by Teja, type: DDZ-90-7.5/2000, capacity: 2000 liters. Dissolver equipped with cooling jacket, anchor mixer with scrapers and dispersing mixer. Acid-resistant execution. Motor power 90 kW.

Designed as a machine for smaller formats, the 19 200 Base is capable of producing 7500 packs per hour. It is suitable for filling different products. Preferably, aseptic products are filled in the machine, which are previously fed into the filling line via a UHT or a pastorizer for preservation. Subsequently, it is possible to equip the filling machine with different downstream equipment. You are welcome to contact us to find the right selection for your requirements. We are also happy to support you in the planning and implementation of the necessary conveyor belt systems to connect the individual machines as a line. All machines undergo extensive technical work before they are put back into operation, which we always carry out in our workshop. In the end, there are always tests to be fully verified. These tests guarantee the perfect condition of the machine for the customer. On reques ...

Offer 24236 Specifications: - max. working width 2550 mm - max. cutting capacity St 40 4.0 mm - Cutting angle 1.30 ° - Positioning-controlled back gauge 20 - 750 mm - Front angle stop + support arms - E. footswitch - Stroke rate up to 34 rpm depending on cutting length - Drive 400 V / 3 kW - Table height approx. 850 mm - Space required including back gauge, without front support arms -ca. W 3250 x H 1250 x D 2000 mm - Weight approx. 3500 kg

Used autoclave KRENN with fully automatic. Control and 240 liter capacity -2024 overhauled- - Completely overhauled 2 years ago and like new - New insulation, new radiators, new control system - 240 litre capacity - Electrically heated - Boiler, core temperature and F-value adjustable - completely overhauled - Incl. fully automatic control ADITEC MIC 900 with 7" TFT Color Touch screen - 50 programs programmable with 10 steps each - No manual intervention necessary - Pressure control, temperature, cooling and back pressure are controlled automatically - After beep, the lid can be opened and the products are sterilized - Incl. USB data logger - Incl. 3 pieces of 1/3 high stainless steel baskets - Incl. 1 stainless steel base plate - Device mobile - Condition: Very good, as good as new, ready for immediate use - 6 months warranty - Delivery time: 1 week after order Te ...

Packaging line for shrink bags The line consists of : Vacuum packaging machine MULTIVAC C 700 Chamber dimensions (LxBxH): 1060x440x200 mm Machine dimensions (LxBxH): 1270x850x1150 mm Seal bar length: 1 x 1060 mm Machine cycle: 15-40 sec. Voltage: 400 V-3-50 Hz Power: 7,0 kW ; 22 A HENKELMAN DIPTANK 200 A Automatic platform with conveyor belt Digital temperature control Stainless steel casing Maximum loading capacity: 30 kg Immersion depth: 200 mm Immersion time: 3-5 seconds (adjustable) Cycle time: 22 seconds Compressed air consumption 50 l/min 6 bar Automatically controlled water supply Water drain Automatic water level control Built-in scale protection Time switch to preheat water

swing diameter: 640 mm max. turning passage: 640 mm control: Simens 840 D Powerline - - - - - Main spindle - - - - -: - - - - - - bar material dia.: 65 mm chuck diameter: 200 - 315 mm spindle bore diameter: 80 mm diam. of main spindle in forward position: 120 mm --- Subspindle ---: - - - - - - bar material dia.: 65 mm chuck diameter: 315 mm spindle bore diameter: 80 mm forward bearing diameter: 120 mm - - - - - General data - - - - -: - - - - - - spindle distance: 1.500 mm turning length: 1.185 mm Main-/Counter -spindle turning speeds: 5.000 U/min driven tools turning speeds: 12.000 U/min Slide cross: X1, Y1: 550 / 180 mm Slide cross: Z1: 1.185 mm Slide cross: B1: 240 ° Slide cross: X2: 180 mm Slide cross: Z2: 1.050 mm Slide cross: Z3: 1.150 mm CNC Turning- and Milling Center | DMG GILDEMEISTER - GMX 250 linear equipped with main/counter spindle, chip conveyor, tool changer, a turret fo ...

Key data: 253 KW

Used Jenbacher 208 gas engine, GenSet BJ 1993; no documentation or operating hours available; Jenbacher maintenance contract; since motor was not covered when uninstalled - it looks like that; Price on request, ATTENTION Location 6135 AUSTRIA

Ref. №: 4018 Sausage line The line include: HP10 E type 161 Continuous vacuum filler for straight filling and portioning Machine features: All in one 250 l hopper Standard double screw Standard double screw housing Integrated CAN-bus control: Graphical display Double screw drive with 7.0 kw AC servo Infeed scroll drive with 4 kw ac motor with frequency inverter Nominal output, total: 14 kw ;21 A VEMAG lifting and tipping device for HPE with 250 l hopper To fit standard trolley, 200 l capacity VEMAG high-performance linking machine for identical lengths with casing magazine LPG 209: For linking and portioning all common types of casing in identical lengths With casing magazine for collagen, polyamide or cellulose casings For sausage calibers from 13 to 40 mm For shirred casing lengths up to 430 mm For sausage lengths from 20 mm to approx. 400 mm Nominal ...

Code: 0103 Brand: LOESER - GERMANY Model: AA-220 Wooden dowel production machine complete with n° 2 dowels

Dry Extraction Wall Spänex TAW compact 215 Paint mist extraction wall with dry separator Complete supply air system Hot water heating coil Spray chamber control with touchscreen 2 x 2.0 kW drive power 6000 m³/h volume flow Year of construction: 2011 From joinery liquidation / retirement in GOOD - CONDITION from the carpentry workshop

We sell here a water pump for M.A.N. 2842 with the part number: 51.06500.6598. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales team with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, except for one E70. Our mobile response team is active nationally and internationally. They bring the necessary tools and know-how with them. Draw on over 25 years of professional experience. With our modern engi ...

Key data: 275 mm, 4000 1/min

Mori Seiki NL 2500 SY / 1250 CNC lathe with Y-axis, driven tools and 2nd spindle CNC control MSX-850-lll (mitsubishi 720 BM) Turning diameter 275 /366 mm Spindle bore diameter 80 mm Spindle speed 4000 rpm Spindle motor 18.5/15 Kw X-axis travel 260 mm Y-axis travel +50 / -50 mm Travel Z-axis: 1345 mm Travel of the W-axis (sub-spindle to main spindle) 1275 mm Min. indexing C-axis main spindle 0.001° Number of tools on the turret 12x Number of driven tools 12 x Tool cone BMT Bar Feeder LNS Quick Load Servo lll Spindle-motor-driven tools 6000 U/ If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Control Fanuc Turning diameter ... 380mm Axis X ... 151mm Axis Z ... 339mm Circumferential diameter via support ... 290mm Spindle speed ... 20-6000 rpm. Machine weight ... 4200kg Main engine power ... 7.5kW L x W x H ... 2885/3865x1720x1670mm The machine is in good condition, possible to test under power.

AGFA/ Cawo Cawomat 2000 IR - X-ray processing machine • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. • You buy the system in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer! • The offer is subject to prior sale.

- AISI 304 stainless steel Equipment: - Round manhole with handwheel - Level indicator - Tester - Floating lid, air chamber and pump - gallows - Partial drain, Friedrich ball valve no. 2 40 - Total drain, Friedrich ball valve no. 2 40 Dimensions: - Ground clearance: 315 mm - Diameter: 1690 mm - Height: 2180 mm

Machine Type: Electrode Inverter Welding Rectifier without bi-power device Make Merkle Type MobiARC 284 cel Appendix No. 103.101 Connection voltage 3 x 400 volts Adjustment range 20 – 280 amps Duty cycle 35% ED at 280 amps 60% ED at 240 amps 100% ED at 210 amps Current adjustment infinitely variable max. weldable material thickness 7 mm Cooling inverter through built-in fan Portable assembly system design Fuse 16 Ampere Dimensions L x W x H 485 x 200 x 435 mm Weight 17 kg Age 9 years Connection for hand and foot remote control Condition workshop tested, very good, incl. UVV test protocol Scope of supply welding system with the following accessories: 1 piece of electrode cable 1 piece ground cable 1 pair of welding gloves with cuff 1 piece slag hammer heavy version 1 piece steel wire brush 2-row 25 pcs rod electrodes ...

; Power [PS]: 24; Gross weight [kg]: 650; Engine: Perkins 404J-22G; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets:, - CEE 32A - 400V - 5P, , You can also order this Generator with a Leroy Somer or Stamford Alternator., Prices when changing Generator options may differ from the price online.; Water Tank Volume [l]: 70

; Power [PS]: 24; Gross weight [kg]: 630; Engine: Yanmar 4TNV88-22G; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets: , - CEE 32A - 400V - 5P, , You can also order this Generator with a Leroy Somer or Stamford Alternator. , Prices when changing Generator options may differ from the price online.; Water Tank Volume [l]: 70

Inv. Num. : 6496 Type: BCE 1-45-25D Producer: Battenfeld Created: 2007 Parameters: Switch-on hours: 47000 h Table dimensions: 2500 x 400 mm Screw length: 25 mm Screw diameter: 45 mm Material: PVC Towing speed: 3.5-50 m/min Head diameter: 45 mm Machine dimensions: 2580 x 900 x 1100 mm Weight: 1030 kg Line Components: Calibration table type CT2500/V1 Extruder Type 1-45-25D Towing type B100E

Automatic Transfer Switch - ATS Panel - ATI Panel, 1000 Ampere - Applicable for generators up to 675 kVA; Gross weight [kg]: 180

Key data: 410 mm, 240 mm, 4 kW

SCM 2041 FS Planer and Thicknesser Manufacturer SCM Italy AB 66989 Ref 110830 Year of manufacture approx. 1994, from school use in good condition 3 cutterblock Planing shaft speed 5000 rpm Planing: Table length 2000 mm Planing width 410 mm Support table length 1040 mm Support table length 910 mm Max. Chip thickness: 10 mm Jointing fence swivelling 0 - 45° Table adjustment for planer with rotary lever Pressure link vibration guard Thickness planing: Planing width 410 mm Max. chip thickness: 7.5 mm Chip thickness: 7.5 mm Min. planer thickness: 3 mm Max. planer thickness: 240 mm Planing thickness: 240 mm Thicknessing table length: 730 mm Sliding table roller Planing shaft speed 5000 rpm Feed speeds 6 and 10 m/min Height adjustment of thicknessing table with handwheel Infeed roller steel Exit roller steel Connections: Motor power: 4 kW with motor brake  ...

Refrigerant compressors system Bitzer -Type: 6H-25.2Y-40P (x7), 6HE-28Y-40P (x1) -Volume: 110.5 m3/h (x7), 111 m3/h (x1) -Cooling capacity for R404A: 605 kW at -5°C/40°C, 500.8 kW at -10°C/40°C, 260 kW at -25°C/40°C -Dimensions: 5100 x 800 x 1850 mm -Items in magazine: 1 -Reference number: Z 101 -Condition: Used in good condition

Haendle roller gear 2,000 mm x 800 mm, with new gearbox and runner rings, after overhaul. Throughput capacity 100 t/h

Automatic Transfer Switch - ATS Panel - ATI Panel, 1250 Ampere - Applicable for generators up to 865 kVA; Gross weight [kg]: 180

1. Qty. 3 Bell Batch Annealing Furnaces (Pair of bases 1-6) Mfc.: EBNER Type: HOG 180/320 St – H2 Built: 1989 Stopped: 2025 Each pair of bases (units: 1-2, 3-4, 5-6) has one cooling hood and one heating hood. Coil Max. outer diameter: 1,650 mm Max. stacking height: 3,200 mm Hood dia.: 2000 mm Useful dia. (inner hood): 1800 mm Useful height (coil dia. 1540 mm): 3400 mm Useful height (max. coil dia. 1650 mm): 3200 mm Max. base load: 50 T 2. Qty. 1 Bell Batch Annealing Furnaces (Pair of bases 7-8) Mfc.: EBNER Type: HOG 180/230 St – H2 Built: 1989 Stopped: 2025 Coil Max. outer diameter: 1,650 mm Max. stacking height: 2,300 mm Usefull dia. (inner hood) 1800 mm Hood dia.: 2000 mm 2 Protective hoods with inner shell Max. temp. under hood: 750 °C Maximum base load: 35 t 2 Control stations

For Sale: Hammelmann Aquajet 204 High-Pressure Pump Unit – Demo Model Model: Aquajet 204 Machine No.: C5.02204.1617 Year: 2025 Engine Power: 200 kW - 2150 RPM Pressure Rating: Up to 2800 bar - 40 l/min Plunger Diameter: 20 mm Oil Type: PAO ISO VG 320 Oil Quantity: 12.5 litres Condition: Demo model – very well maintained Current Hours: Approx. Less than 500 (still in use; hours may increase) Crankcase: Filled with high-quality synthetic oil (Shell Omala S4 GX 320) This unit is ideal for hydrodemolition, surface preparation, industrial cleaning, and other ultra-high-pressure applications. Still in operational use and available for inspection.

For Sale: Hammelmann Aquajet 204 High-Pressure Pump Unit – Demo Model Model: Aquajet 204 Machine No.: C5.02204.1617 Year: 2025 Engine Power: 200 kW - 2150 RPM Pressure Rating: Up to 2800 bar - 40 l/min Plunger Diameter: 20 mm Oil Type: PAO ISO VG 320 Oil Quantity: 12.5 litres Condition: Demo model – very well maintained Current Hours: Approx. 500 (still in use; hours may increase) Crankcase: Filled with high-quality synthetic oil (Shell Omala S4 GX 320) This unit is ideal for hydrodemolition, surface preparation, industrial cleaning, and other ultra-high-pressure applications. Still in operational use and available for inspection.

Max. punching and shearing capacity: 400 kN For example, punches 20 mm holes in 15 mm steel Shears on the flat steel shear on 120 mm to 12 mm steel Further technical data on request With an assortment of stamps and dies as desired

Quantity: 2 pieces Manufacturer: Knoll Type: 200 S-1 Year of Make: 2013 Total length: 4 m Conveyor belt: 2 m

Control Siemens 840Dsl Speed [rpm] 24000 Travel X/Y/Z [mm] 2600/1700/950 Tool Attachment HSK-A63 Spindle: Technology Swivel head with motor spindle Speed 24,000 rpm Power (max.) 15 kW Torque (max.) 14.3 Nm Tool holder HSK-A63 A-axis +/- 120° C-axis 270° General: Tool Magazine 18 Stations Clamping area 2,350 x 1,700 mm Rapid traverse in X/Y/Z 80/80/60 m/min Equipment/accessories: Workpiece Measurement Probe, m&h RWP 20.50 Tool Measurement Laser, Hexagon Tool breakage detection stylus, m&h TS 35.20 Setup operation Electronic handwheel 3D extruder CEAD S25 Granulate dryer/conveyor Vismec Other equipment spindle coolers

BAZ Hurco VMX 24 t

2021 Kraft VPS-100/2500 Cardboard cutting machine VPS100 from Kraft The machine was built in 2021 and was used very little. VPS100/2500 Basic machine plus - 10 x tool for longitudinal machining - 1 x tool for cross processing - 2 x rubberized rollers as counter-cut or transport medium - 1 x upper pressure controlled in segments above the feed roller - 1 x control cabinet decoupled and integrated in the basic machine Additional: - Freestanding control panel - Automatic outfeed device - Automatic carton changer with 6 chutes (4 with side-by-side function) - Mguard router - Wireless 1D code scanner incl. interface - 3 free Kraft Boxdesigner licenses + 1 license on the machine Description With the VPS100 automatic box cutting machine you can finally produce the right packaging, at the right time, in the right quantity. Reduce your cardboard consumption to what is necessary ...

Note: The pictures serve to illustrate the material. - The workbench frames are picked unassembled; - The production time is usually about 3 - 5 working days. Basic dimensions: Width: approx. 1,250 mm Depth: approx. 700 mm Height: approx. 940 mm The scope of delivery includes: 04x Square tube, used Material colour: sendzimir galvanised Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Borehole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma Profile, used Material colour: sendzimir galvanised CS-Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 970 mm 02x CS Sigma Profile, used Material colour: sendzimir galvanised CS-Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 420 mm 01x Particleboard, used Particleboard thickness: 38 mm Particleboard width: 1,250 mm Particleboard depth: approx. 700 mm Surface: coat ...

Tetra Pak TBA19 200 ml Slim Filling Line Reliable Tetra Pak carton filling line designed for efficient packaging of liquid food products in 200 ml Slim cartons. The TBA19 filling system offers stable performance and proven technology for beverage and dairy production environments. General Information - Manufacturer: Tetra Pak - Model: TBA19 - Year of Manufacture: 2007 - Version: V030 Technical Specifications - Capacity: 7,500 packs per hour - Package Volume: 200 ml - Package Format: Slim Machine Description The Tetra Pak TBA19 is a reliable and efficient filling solution designed for medium-capacity carton packaging lines. With its V030 version upgrade, the machine offers improved operational stability and performance for continuous industrial production. Key Features - High production capacity: up to 7,500 packs per hour - Compact and space-efficient design, s ...

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 5   X-axis travel: 800 mm   Y-axis travel: 600 mm   Z-axis travel: 800 mm   W-axis travel: 1250 mm   rotating range B-axis from: 0 °   rotating range B-axis up to: 360 ° WORKING RANGE -BORING-   drilling depth (max): 800 mm   drilling capacity full bore (steel): 25 mm SPINDLE / HEAD   tool fixture: HSK A50   drive power: 15 kW AXIS DRIVES   feed velocity (max): 15000 mm/min TOOL MAGAZINE   number of positions: 20 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 5600 mm   space requirements -front/back-: 4910 mm   total height: 2700 mm   total weight approx.: 10800 kg 20 toolstationswith rotating table 800x600approx 46300hIncluding chip conveyor and variou ...

Equipments: as is Good condition Overtemperature protection max. 170°C Plant power max. 7.5 kW PUR gluing unit

Key data: 3500 kN

Awaiting refurbishment is this Arburg 221KS 350/100 U injection moulding machine. Fitted with a Selogica controller. This is a universal machine from Arburg which allows for the clamp unit to be pivoted vertically, ideally suited to insert moulding. These small machines are sought after for the many moulding options they can suit, from a very compact machine. Occasional vertical moulding requirement? These machines are ideal. In standard horizontal configuration, they operate the same as any traditional machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fa ...