sm 102 2 used for sale

pressure: 200 t stroke: 400 mm total power requirement: 7,5 kW weight of the machine ca.: 2300 kg dimensions of the machine ca.: 2.000 x 1.200 x 2.800 mm Control: Producer: HIDROLIKSAN YOM: new Type: HD 160 Thrust: 160 ton. Stroke: 400 mm Throat depth: 480 mm Total power requirement: 5,5 kW Distance between frames: 1.200 mm Cylinder-Ø: 120 mm Dimensions (LxWxH): 1.800 x 1.000 x 2.550 mm Weight: 1.400 kg Additional information: • solid, welded construction • pressure cylinder lateral adjustable • operating electrical per switch lever / • pressure indication per Manometer • material support per cylinder, adjustable in height • CE-mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 250 mm -Type: B2-40/18x250 TGL 10906 -Piston rod: Ø 18 mm / M16 -Holes: Ø 24 mm -Dimensions: 285/75/H90 mm -Weight: 4.2 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders, tie rod cylinders, tilting cylinders -Manufacturer: Pacoma, Hydraulic cylinder: stroke 220 mm -Art.No.: 3483441M91 29 L 01 07328450 -Piston rod: Ø 60 mm -Dimensions: Ø 75 x 320 mm -Weight: 8.5 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: single-acting stroke 205 mm -Type: unfortunately without type designation -Piston rod: Ø 32 mm -Hole: Ø 20 mm / Distance: retracted 335 mm -Dimensions: 390/50/H55 mm -Weight: 3.8 kg/piece

plate width: 2000 mm plate depth: 3000 mm plate height: 350 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 2500 mm grinding width: 600 mm workpiece height: 800 mm Table dimensions: 2500x600 mm vertical movement: 800 mm throat: 650 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stepless automatic feed for table 3-40 m/min Return feed for table Filter attachment Hydraulic unit Coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2500 mm swing diameter: 2800 mm turning height: 2200 mm table load: 15 t turning speeds: U/min Feed: mm/U digital readout: Rest: 2 Side head: total power requirement: 55 kW weight of the machine ca.: 56 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 3000 mm weight max. in kg: 250 kg swivelling range: . Grad height: 3800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Lifting height 3800 mm Crane number 1.27 The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: single-acting stroke 200 mm -Type: unfortunately without type designation -Piston rod: Ø 32 mm -Hole: Ø 20 mm / Distance: retracted 335 mm -Dimensions: 390/50/H55 mm -Weight: 3.9 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 210 mm -Type: unfortunately without type designation -Piston rod: Ø 35 mm -Holes: Ø 30 mm / Distance: retracted 430 mm -Dimensions: Ø 70 x 495 mm -Weight: 8.5 kg

Key data: 2500 V, 2711 , 6300

Engine; MTU204000L64 Year of Construction 2025 Operation hours; 0 (New) Electric power; max 2500kWe Construction form; 20 cylinders in V configuration Voltage; 6300 kV Apparent power; 2.711kVa Speed; 1.500 RPM Frequency; 50Hz Model; Containerized Fully equipped with heat coupling & CHP MTU, GAS GENERATOR, CONTAINERIZED, CHP ROLLS ROYCE

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 210 mm -Type: unfortunately without type designation -Piston rod: Ø 35 mm -Holes: Ø 35 mm / Distance: retracted 540 mm -Dimensions: Ø 110 x 635 mm -Weight: 20.8 kg

4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Manufacturer: Forkardt, power chuck type KSH 200 -Chuck size: Ø 200 mm -Jaw width: 24 mm -Passage: Ø 49 mm -Mounting: Cone Ø 105-102 mm -Thread: M52 -Dimensions: Ø 200 x 130 mm -Weight: 23.1 kg

4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Power chuck: chuck size Ø 215 mm -Jaw width: 20 mm -Passage: Ø 52 mm -Mounting: Cone Ø 106-103 mm -Thread: M60 -Bolt circle: Ø 133 mm -Dimensions: Ø 215 x 90 mm -Weight: 19 kg

Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier -Tool carriage: support carriage support carrier -Support plate: 265 x 180 mm -Dimensions: see photos -Dimensions: 290/280/H70 mm -Weight: 21.1 kg

Axial Dry Cooler, Güntner GFH090.2A/2x3-M(S) Manufacturer: Güntner. Medium: Water Glycol 70/30% Medium temperature: Inlet 90º C. Outlet 70º C. Cooling Capacity: 800kW Air temperature: 35º C. Fans: 6 pieces, 1.5kW, 400V, 50Hz, 3 conductors Connection: Inlet 1x DN80, Outlet 1x DN80 Dimensions: LxWxH = 6,200x22921x1460mm Weight: 1358kg Sound pressure level: 53 dB(A) 10m distance, Year of Make: 2016 Condition: Good, leakage and fans tested Jenbacher, Dry cooler, Dry air cooler, Emergency cooler, drycooler, Glycol cooling water

Chuck flange, flange mount, lathe chuck flange, driving flange, lathe chuck face plate, chuck flange for power chucks -Manufacturer: Röhm, chuck flange for power chucks, three-jaw chucks, four-jaw chucks, faceplate -Type: 55021/22-6 Ø 210 mm -Bolt circle: Ø 133 mm -Dimensions total Ø 210 x 170 mm -Weight: 12.4 kg

Axial Dry Cooler, Güntner GFH090.2A/2x3-M(S) Manufacturer: Güntner. Medium: Water Glycol 70/30% Medium temperature: Inlet 90º C. Outlet 70º C. Cooling Capacity: 800kW Air temperature: 35º C. Fans: 6 pieces, 1.5kW, 400V, 50Hz, 3 conductors Connection: Inlet 1x DN80, Outlet 1x DN80 Dimensions: LxWxH = 6,200x22921x1460mm Weight: 1358kg Sound pressure level: 53 dB(A) 10m distance, Year of Make: 2016 Condition: Good, leakage and fans tested Jenbacher, Dry cooler, Dry air cooler, Emergency cooler, drycooler, Glycol cooling water

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Bruckner, rotating centering point centering cone -Type: unfortunately without type designation -Recording: MK5 -Centering tip: Ø mm -Dimensions: Ø 95 x 295 mm -Weight: 6 kg

Available For sale Gas Generator MWM Type TCG 2016 V 16 1300 KVA Year 2007 Boigas book maintenance

Very agile machine made in Japan. Even faster than Robodrill for in tooling. MECTRON 3-axis machining centre type MTV E 210 (year 2010) Agile high power machine for fine tooling Made in Japan. It is faster than Robodrill, more tools. X/Y/Z travels 250/250/250 mmpositioning precision 0,003mm repatible +/-0,002mmmax. feed 36m/min @ 1,0g table size 400/300mm, spindle nose 100 - 350mm of tablemax load on table 80kg HSK E 25 spindle, max 30000 UminRigid Tapping 8000/min30x tool changermax tool D30x100 SINUMERIK 840DSL controlmax. program memory 2MBabsolute position detection COMPCAD, Slope processing, Rigid tapping, Circular interpolation, Measuring function, Polar coordinates interpolation, Background editing, Macro, G10, USB, backslash compensation, canned cycleNC Options: Ethernet, 4th axis, cylindrical interpolation, tool life management, 2nd measurement function, position monitoring func ...

electric magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate -Manufacturer: Elsterwerda, magnetic clamping plate type ED 215 -Clamping surface: 200 x 150 mm -Connection: 220 Volt DC -Dimensions: 370/150/H80 mm -Weight: 14.3 kg

Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket -Duplex sprocket: 1 inch 12 teeth -Type: 20B-2 1 1/4 x 3/4 -Shaft mount: inner Ø 50 mm -Dimensions: see photos -Total dimensions: Ø 138 x 80 mm -Weight: 3.8 kg.

Offer 25021 Technical data approx.: - Compressive force 250 t - Projection 360 mm - Table size approx. 1100 x 800 mm - Diarrhea hole in the table approx. 320 mm - Tappet area approx. 800 x 475 mm - Peg hole in the tappet mm - Plunger adjustability 110 mm - Stroke adjustment 30 - 140 mm - Max. stroke rate 45 1/min - Pneumatic connection 6 bar - Drive 400 V / 22 kW - Space requirement approx. W 1400 x H 2990 x D 2700 mm - Weight approx. 13 T

CNC controller: Mitsubishi M-720BM (MAPPS 2) Capacity X-axis travel mm: 260 Z-axis travel mm: 590 Turning length mm: 510 Max. turning diameter mm: ø: Ø356 Upper turret Tool holder: 12 Main spindle Speed spindle rpm: 5000 Drive power spindle kW: 15/11 Spindle bore mm: 73 Manufacturer: KITAGAWA Equipment Chip conveyor Signal lamp Tool measuring arm High pressure pump Workarea light 4th axis Interface for Bar feeder Rated power kVA Working time hours Under power: 7456 Spnidle: 5423 Basic machine dimensions / weight Length mm: 3495 Width mm: 2050 Height mm: 2230 Weight kg: 5800

Three-phase oil transformer DIN 42500 The four impellers/ wheels are also exist and included the external dimensions are approx. Width 1.4 m Length 2.2 m Height to top edge of LV connection bolt 2.0 m Hermetic version with DGPT2 and Euromold plug connections Find more here - /

2013 SEPARFLEX 250 A Automatic water separator Find more here - / Contact us at -

Lifting strut, lifting gear, lifting drive, lifting linkage -Lifting strut: hydraulic lifting rod -Type: unfortunately no type designation -Part No.: 831/65 U10-2.8 -Dimensions: see photos -Dimensions: 1070/210/H130 mm -Weight: 12.7 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve -Morse taper sleeve: Extension sleeve MK4 -Dimensions: Ø 47/265 mm -Weight: 1.8 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: ABW, live center -Type: ZNB 204 -Recording: MK4 -Dimensions: Ø 100 x 215 mm -Weight: 3.5 kg

2021 Doosan Puma GT 2100 CNC lathe Type: Puma GT 2100 Producer: Doosan Year: 9/2021 Hours: 1008 Full functional, under power. Find more here - / Contact us at -

Analyzer, vapor pressure tester, Minivap VPS -Manufacturer: Grabner, steam pressure tester Minivap VPS -Type: 210-000-00 -Carton dimensions: 200/185/H320 mm -Weight: 7.9 kg

6-axis robot with controller, an associated programming device and, on request, the bagging scale shown for sale. The operating hours are probably less than 100 hours. The system is being sold because of a product change. Previously, the robot filled powder into paper bags (20kg), sewed the bags shut and palletised them. Find more here - / Contact us at -

Höfer Press for sale. Model: HKP 260 + HKP 40 Year: 2005 Dimensions: Dimensions of the HKP260 (for transport): L x W x H 5100 x 2300 x 3000 mm Dimensions of the HKP40 (for transport): L x W x H 3900 x 2300 x 2400 mm Dimensions of each hydraulic unit: L x W x H 1400 x 1400 x 600 mm Loading table dimensions: L x W x H 4900 x 2100 x 1100 mm Outfeed table dimensions: L x W x H 2900 x 2100 x 1100 mm Heating unit dimensions: L x W x H 1400 x 500 x 1300 mm (2x) Main control cabinet dimensions: L x W x H 2000 x 1000 x 400 mm Dimensions of entire system ready for operation: L x W x H 14600 x 2600 x 3000 mm Weight of the HKP260 press (for transport): approx. 13000 kg, all attachments removed Weight of the HKP40 baler (for transport): approx. 6300 kg, all attachments removed Weight of the hydraulics: approx. 350 kg Weight of the switch cabinet: approx. 400 kg Weight of the heaters: ...

Clamping rail, guide rail, support rail, stop rail, T-slot rail -Clamping rail: with T-slot on both sides -Length: 200 mm -Groove width: 10 mm, dimensions see photo technical drawing -Dimensions: 200/55/H32 mm -Weight: 1.9 kg

Manufacturer KRAUSS MAFFEI Type KM 200-700 C1 M. Year 2005 • Dimensions(LxWxH) 5600x1900x2200 • Weight 11000 kg Injection molding machines are used for manufacturing parts from different plastics in a wide range of colors, shapes and sizes. Processing of thermosetting plastics involves transforming the initial material in the machine into a plastic state by heating it and injecting it under pressure into a closed shape (mold) and removing it from the mold after a cooling phase. Find more here - / Contact us at -

Clamping rail, guide rail, support rail, stop rail, T-slot rail -Clamping rail: with T-slot on both sides -Length: 250 mm -Groove width: 14 mm, dimensions see photo technical drawing -Dimensions: 250/56/H41 mm -Weight: 2.4 kg

gear, gears, gear shaft, pinion shaft -Gear shaft: straight-toothed pinion shaft -Gear: Diameter Ø 42 mm / 14 teeth -Tooth width: 83 mm -Dimensions: see photo technical drawing -Number: 9x gear shaft available -Price: per piece -Total dimensions: Ø 42 x 220 mm -Weight: 0.9 kg/piece

2012 Envair CDC F 2G2D & 2012 REUKO Isolator and cleanroom Last filter change and last maintenance were on 09.01.2014 (see test report in the appendix) The air handling unit is designed for a room size of approx. 12 m2 (file room 3.46 in the appendix). The isolator has the complete documentation incl. test reports. It has been used very little (see current operating hours below) and is connected to an air handling unit (designed for approx. 12 m2). These are the technical parameters: REUKO climate service ENVAIR Isolator (Cytostatic isolator (CMR) 1.2m) a. Manufacturer: Envair Deutschland GmbH b. Type: CDC F 2G2D (2-Hand, Isolator clean room class A) c. Build: 06. 2012 d. Use: Reconstitution during 2 clinical trials (including cytostatics); idle operation for several months e. Details: isokinetic measuring probe, For the processing of: - Cytostatics - antivirals -hazardo ...

PLC controller, central assembly, RAM, CPU, central processing unit, central device -Manufacturer: Siemens, SIMATIC S7-400, CPU 414-2 WORK MEMORY -Type: 6ES7 414-2XG03-0AB0 -CPU: CPU 412-2 -Dimensions: 215/25/H290 mm -Weight: 1.0 kg

Clamping plate, marking plate, measuring plate, measuring table, surface plate, marking plate -Manufacturer: Stolle, clamping plate with support ribs -Length: 2005 mm -Width: 1500 mm -Plate thickness: 40 mm -Plate: with support ribs -Transport dimensions: 1500/2005/H500 mm -Weight: 1800 kg

Screening system The parts list of the screening system. The system was initially operated with a generator and now has a permanent power connection. - Vibratory conveyor trough with double balancing drive - Single deck vibrating screen SEWU 2400x5000 - Industrial trailer with all-wheel steering and swing axles, mechanical support feet, payload 47 tons - Steinert overband magnetic separator UMP 90 180 W - Trough conveyor belt, center distance 13 m, belt width 2 m - MTS conveyor belt scale in the fine grain belt - Draabe Luftfeuchtungsystem MyFog Find more here - / Contact us at -

Makfil Andromeda 2001 + tool inserts Find more here - / Contact us at -

- SFE. Superfast 2x18L CO2 Extraction System manufactured by Thar Process. The supercritical fluid extraction system is designed to extract oil, oleoresins, and other ingredients which become soluble in supercritical CO2 at high pressure and temperature. SFC. Isolator SFC 20 CO2 Purification System manufactured by Thar Process. Purification SFC is a normal-phase chromatographic technique that uses CO2 as the main mobile phase. Find more here - / Contact us at -

Description: Eagle Systems CFM 106-20K Eco-Eagle Foil Module Consisting of: 1. Bi-directional differential shaft (x2) 2. Automatic pneumatic connection 3. SS Dual hardened helical gears both shafts 4. Quick release rubber module spreader rollers 5. Lower in-feed roller assembly for proper foil path 6. Heavy duty linear thrust bearings 7. Precise air transducers 8. Air pressure control sensor 9. PID closed loop air system control 10. Eco-Power” Minimal power servo motor control 11. Closed loop sensors for foil speed control 12. Fail safe closed loop sensors for multi foil roll control 13. Foil position encoder 14. Fail safe wiring system 15. Solid state relays 16. Mode indication by lights 17. Fully automatic control 18. Fail safe press guarding 19. Full Module guarding 20. Foil shaft lifting beam 21. All electrical and pneumatic controls contained within the modu ...

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1800 mm -Cross-section: 200 x 60 mm -Recording: see photos -Transport dimensions: 2060/1080/H200 mm -Total weight: 487 kg

Crane block, crane hook, load hook, single hook -Crane hook: Load hook load capacity 250 kg -Type: PNo 025 -Hook opening: 32 mm -Dimensions: see photos -Dimensions: 165/105/50 mm -Own weight: 0.9 kg

plastic strapping, strapping tape, packaging tape, tensioning tape, plastic tape -Strapping band: Plastic strapping band 8 rolls Ovp -Type: 5 x 0.5 mm core 200 mm -Width: 5 mm -Roll: Ø 395 x 190 mm -Price/Delivery: complete -Transport dimensions: 800/800/H390 mm -Total weight: 87 kg

2005 STRIKO WESTOFEN MH I-2 3000/2000 Charging system Oven Technical data: See pictures Find more here - / Contact us at -

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: AROWA, three-jaw chuck chuck size Ø 200 mm -Passage: Ø 55 mm -Bolt circle: Ø 175 mm / M10 -Accessories: incl. 2nd set of interchangeable jaws -Dimensions: Ø200 x 105 mm -Weight: 13.8 kg