slotting machine vertical used for sale

Manufacturer: Arburg Type: 470 C 1500 - 350 Year of construction: 2005 Control: Selogica Closing type: Hydraulic Closing force: 1500 kN Tie bar spacing: 470 mm x 470 mm Plate size: 650 mm x 650 mm Tool height: min 250 mm Opening distance: 500 mm Plate spacing max.: 750 mm Screw: 45 mm Lifting volume: 230 ccm / 210 gram PS Injection pressure: 1670 bar general Engine: 30 kW Heating: 10,2 kW Dimensions: 4.9 m x 1.7 m x 2 m Weight: 4600 kg Screen text: German Optional extras Robot Arburg Multilift + 100mm column extension El. Dosing + LGS 6 heating control points Robot interface Core train x1

Key data: 406 mm, 584 mm

Inv. Num. : 9153 Type: DS-30SSY Producer: HAAS Created: 2015 Parameters: Hours: 3002 h Maximum turning length: 584.2 mm Maximum turning diameter: 406.4 mm Maximum turning diameter over bed: 807.7 mm X-axis travel: 317.5 mm Y-axis travel: 50.6 mm Travel Z-axis: 584 mm Maximum main spindle power: 14 kVA Maximum spindle speed: 4800 1/min Number of all tools: 24 pieces Spindle bore: 88.9 mm Weight: 7259 kg Equipment: Chip conveyor Pick-up spindle C-axis Bar Feeder Tool Alignment System System for removing parts after cutting Driven Axial Holder ER32 (Heimatec) Driven radial bracket ER32 (Heimatec) Holders for rotary tools, other holders and jaws

Jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, -Table dimensions: 700 x 405 mm -Travel paths: Z 330 mm/Y 410 mm/X 630 mm -Quick stroke: 155 mm -Recording: MK4 -Speeds: 31 - 1500 rpm -Dimensions: 1570/1800/H2600 mm -Weight: 2600 kg

Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Manufacturer: Fronius, remote control RCU5000i Univ.SD -Art.No.: 4,046,098 -Voltage: U1 24 V -Dimensions: 180/260/H50 mm -Weight: 1.5 kg

Code 0736 Description hydraulic surface grinding machine Make ORION ( HAHN & KOLB ) Model 308 Serial No. 5128 Year 1978 Tablesize 1520 x 300 mm Table grinding size L x B x H 800 x 350 x 500 mm Magnetical plate size L x B 800 x 300 mm Speed table movement 2 - 30 m/min. Rapide vertical movement 0,4 m/min Max. distance table – centre grinding wheel 640 mm Max Grindingstone diameter x Wide x Taper 300 x 50 x Ø 76 mm Spindel power 5,5 and 7,5 kW Spindel speed 1440 and 2880 rpm Weight 3500 kgs Motor power 5,5 / 7,5 kW – 380 Volt Accessoiries Elec. Magneticplate 800 x 300 mm Coolant Condition Machine is in good condition

Multifunctional punch, punch press, hole punch, pneumatic hole punch -operated: pneumatically -Year of manufacture: 1995

Code 0776 Description Surface grinding machine Make ELB Type SWBD 030 MCNC82 Machine No. 18.346.0383 Manufacturing date 1983 Control MCNC / 82-PC Tablesize 3520 x 600 mm Table grinding size L x B x H 3000 x 600 x 600 mm Magnetical plate size L x B 3000 x 400 mm Speed table movement 0,2 – 6 m/min. Max. distance table – centre grinding wheel 850 mm Speeds vertical 3 – 375 mm/min. Speeds cross 1,2 m/min. Speeds grindingwheel stepless 750 – 1400 omw/min Grindingstone: Ø 600 x Wide:100 x Bore: 200 mm Weight 18.000 kg Motor power 37 kW – 380 Volt Accessoiries Electro table 3000 x 400 mm Grinding unit with water cooling Filtering unit with paperfilter Profile grinding unit Condition Machine is in very good condition

Code 5976 Description Hydr. Surface grinding machine Make DANOBAT Type RT – 1200 Machine No. 565 Manufacturing date 1989 ( 1990 in use ) Table size 1400 x 700 mm Grinding dimensions L x W x H 1200 x 750 ( 800 ) x 800 mm Magnetic plate size L x W 1000 x 600 mm Table speed movement 1 - 25 m/min. Max. distance table surface – centre grinding wheel 1000 mm Speeds cross 0,1 - 5 m/min. Vertical movement 0,005 – 0,05 mm Spindle rotation 1500 rpm Spindle power 7,5 kW Grinding wheel size Ø 400 x 50 ( 100 ) x Ø 127 mm Weight 8.500 kgs Total power 12 kW – 380 Volt Accessoiries Electro magnetic plate 1000 x 600 mm from Tecnomagnete Coolant Pendel control Condition Machine is in good condition

Code 4925 Description Surface grinding machine Make ELB Model OPTIMAL 1 VA II Serial No. 180730982 Year 1982 Tablesize 900 x 250 mm Table grinding size L x B x H 600 x 300 x 250 mm Magnetical plate size L x B 500 x 250 mm Speed table movement 1 – 25 m/min. Rapide vertical movement 0,15 m/min Max. distance table – centre grinding wheel 500 mm Grinding stone dim. Stone x Wide x Taper 300 x 50 x Ø 75 mm Spindel power 3,7 and 4,5 kW Spindel speed 1400 and 2800 rpm Weight 3500 kgs Motor power 3,7 and 4,5 kW – 380 Volt Accessoiries Elec. Magneticplate 500 x 250 mm Coolant with paperfilter 2 x DRO Grinding stones, etc. Condition Machine is in good condition

Code 61047 Description Hydr. Surface grinding machine Make ALPA Model RT 1000 Serial No. 53377 Year 1985 Tablesize 1200 x 300 mm Table grinding size L x B x H 1000 x 350 x 400 mm Base size L x B 1000 x 300 mm Speed table movement 3 – 40 m/min. Rapide vertical movement 0,15 m/min Max. distance table – centre grinding wheel 600 mm Grinding stone diam. Stone x Wide x Taper Ø 400 x 50 x 127 mm Spindel power 8,8 kW Spindel speed 1460 rpm Weight 3000 kgs Motor power 8,8 kW – 380 Volt Accessoiries Magneticplate 1000 x 300 mm Coolant Grinding stones, etc. Condition Machine is in normal condition

Code 61062 Description Hydr. Surface grinding machine Make DANOBAT Type RTS - 1600 Machine No. 16 220 Manufacturing date 1975 Table size 1800 x 550 mm Grinding dimensions L x W x H 1600 x 600 x 650 mm Magnetic plate size L x W 1600 x 550 mm Table speed movement 1 - 25 m/min. Max. distance table surface – centre grinding wheel 750 mm Speeds cross 0,1 - 5 m/min. Vertical movement 0,005 – 0,05 mm Spindle rotation 1500 rpm Spindle power 15 kW Grinding wheel size Ø 400 x 50 ( 100 ) x Ø 127 mm Weight 10.000 kgs Total power 20 kW – 380 Volt Accessoiries Electro magnetic plate 1600 x 550 mm from Tecnomagnete Coolant Vertical grinding spindel Condition Machine is in good condition

Code 61063 Description Surface grinding machine Make ABA Model FFU 2000/60 Serial No. 208 125 Control Abamatic 3 Year 1986 Tablesize 2510 x 500 mm Grinding surface L x B x H 2000 x 600 x 700 mm Magnetical plate size L x B 2000 x 500 mm Speed table movement 3 – 30 m/min. Max. distance table – centre grinding wheel 900 mm Grinding stone dim. Stone x Wide x Taper Ø 400 x 50 x Ø 127 mm Spindel power 26 kW Spindel speed 1600 - 3000 rpm Motor power 26 kW – 380 Volt Total electr.com. 34 kW Total space L x W x H 7000 x 3500 x 2650 mm Weight 10500 kgs Accessoiries Elec. Magneticplate 2000 x 500 mm Coolant with paperfilter Digital readout Grinding stones, etc. Condition Machine is in good condition

Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. echnische data: External dimensions LxWxH: 1650x1440x1950 mm Weight: approx. 650 kg Clamping surface XxY: 930x630 mm Travel XxYxZ: 900x600x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reverse play: appr ...

Extraordinary precision Milling, engraving or cutting is possible with the highest precision, due to the high-quality inclined toothed racks installed on each axis. Ideal for processing plate material With the large machining area, the T-Rex is the best possible choice for milling plate materials, as well as for text or image engraving on 2D, 2.5D or 3D workpieces. Thanks to a assembly aid on the short side of the CNC milling machine, the work surface can be ideally and comfortably equipped with the plate material. The ball rollers allow an effortless glide of the plates. External dimensions LxWxH: 3780x2850x1950 mm Weight: circa 1950 kg Clamping surface XxY: 3030x2020 mm Travel XxYxZ: 3000x2000x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reverse play: approx. 0.015 mm Working speed: 12000 mm per minute  ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. Technical specifications: External dimensions LxWxH: 1970x2150x1950 mm Weight: approx. 950 kg Clamping surface XxY: 1230x1320 mm Travel XxYxZ: 1200x1300x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reve ...

Gantry type grinding machine Make: Hiatachi Seiki Modell: 9GA-NRAA Table: 2500 x 1200 mm Max. Table travel: 2000 mm Capacity: 1500 x 900 x 500 mm Control: Fanuc 15 MA Year: 1995

Code 71164 Description Universal Hydraulic Cylindrical Grinder Make SHIGIYA SEIKI Model GU – 27.100 H Serial No. 10222 Year 1978 Grinding length, max. 1000 mm Grinding diameter, max. 265 mm Centre height 135 mm Max. Weight workpiece 130 kg Table tilting angle - 3° till + 7° Table speeds 0,05 – 7 m/min Diam. Grinding wheel 350 mm Width Grinding wheel, max. 25 – 50 mm Motorpower grindingwheel 3,7 kW Speeds workpieceholder steples from 17 – 250 rpm Total power 9,3 kVA 380 Volts Machine size L x W x H 4,0 x 1,8 x 1,6 meter Weight 3200 kg Accessories Coolant, books, electric cabinet,etc. Condition Machine is in good condition

Code 81199 Description Hydr. Surface grinding machine Make DANOBAT Type RT – 1200 Machine No. 504 Manufacturing date 1987 Table size 1400 x 450 mm Grinding dimensions L x W x H 1200 x 600 x 450 mm Magnetic plate size L x W 1200 x 450 mm Table speed movement 1 - 30 m/min. Max. distance table surface – centre grinding wheel 675 mm Speeds cross 0,1 - 5 m/min. Vertical movement 0,005 – 0,05 mm Spindle rotation 1200 rpm Spindle power 7,5 kW Grinding wheel size Ø 450 x 50 ( 100 ) x Ø 127 mm Weight 6000 kgs Size of machine 3250 x 1850 x 2600 mm Total power 19 kW – 380 Volt Accessoiries Electro magnetic plate 1200 x 450 mm from Tecnomagnete Coolant Pendel control Condition Machine is in normal condition

Sieb ball mill used, completion and steel construction by arrangement Drum Ø ca. 2700 mm Drum width approx. 1200 mm The substructure can be offered by our own special machine construction. Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

X-axis: 4500 mm Y-axis: 2500 mm Z-axis: 1000 mm Year: 1986 Voltage: 380 V Power: 80 kW Weight: 63000 kg Size: 9500x9800x6100(h) mm

for self-adhesive Tesa adhesive tape, Carton adjustable in height and width, Space requirement:1250 x 800 x 1600 mm high Weight 180 kg from location warehouse

Transpak TP 6000 Professional strapping machine from a renowned manufacturer, designed for high speed and trouble-free operation. -Up to about 30 straps per minute. -Frame inner dimensions approx. 850 x 600 mm. -Firm strapping by 12 mm tape. -Automatic belt forwarding and belt return. -Strap tension adjustable. -Triggering: strapping via hand button or foot switch or alternatively automatic mode selectable (sensor in the table top). -Uncomplicated and ergonomic bobbin changing and threading system. -Designed with ergonomic roller conveyors on the table surface. -Working height approx. 820 mm. machine can be moved via castors. The machine can be demonstrated under power.

Sind Hamburger forming machine

Professional strapping machine from a renowned manufacturer, designed for high speed and trouble-free operation. -Up to about 30 straps per minute. -Frame inner dimensions approx. 850 x 600 mm. -Firm strapping by 12 mm tape. -Automatic belt forwarding and belt return. -Strap tension adjustable. -Triggering: strapping via hand button or foot switch or alternatively automatic mode selectable (sensor in the table top). -Uncomplicated and ergonomic bobbin changing and threading system. -Designed with ergonomic roller conveyors on the table surface. -Working height approx. 820 mm. machine can be moved via castors. The machine can be demonstrated under power.

X-axis stroke 8,000 mm Y-axis stroke 1,000 mm Z-axis stroke 2,000 mm ISO 50 spindle cone Front bearing spindle diameter 100 mm Total table top 1,000x10,000 mm Maximum workpiece weight per 1m board length 2,500 kg Nominal main propulsion power 22 kW Spindle rpm range - continuous 11-2,500 per minute

ACES RACES: Transverse table (X-axis) 2,040 mm Vertical head (Y-axis) 1,600 mm Spindle axial (Z-axis) 810 mm Longitudinal wagon (W-axis) 1,200 mm Spindles: Rease undersea spindle diameter 127 mm ISO 50 Inner Cone Cutter spindle diameter 221.4 mm SPEED: Continuous change field spindle speed 2-1,250 RPM Advances: Continuous change field feed rate for all axes 1.5-3,000 mm/min Fast feed rate for all axes 3,000 mm/min Powers: Spindle Engine 20 Kw, Advanced Motors 26 Kw, Auxiliary Services 4 Kw table: Size 1.520x1.270 mm Range 8 ton

Professional strapping machine with internal frame dimensions of approx. width 850 x height 600 mm from a renowned manufacturer, designed for high speed and trouble-free operation. Equipped with an ergonomic and uncomplicated bobbin changing and threading system. -Equipped with ergonomic casters on the table surface. -Strapping release alternatively possible by hand switch or table photocell (automatic operation). -Up to approx. 20 straps per minute. -Band width 12 mm. -Strap tension infinitely adjustable. -Fully automatic tape threading and tape penetration monitoring. -Closure type: Welding in the heating wedge method. -Electronic temperature control. -The machine can be moved via castors. The machine can be demonstrated under power.

MIG/MAG welding machine, MIG/MAG welding machine -Max. welding current: 320 A -2-roller drive -Air-cooled -incl. ground cable -with removable wire feeder -Gas valve -Hose package -Dimensions: 1000/500/H970 mm -Weight: 170 kg

Working areaTurning diameter500 mmDistance between spindles1435 mmMax. Turning Length1100 mmGeneralTurning/milling center with turning length 1100 mm - mounting HSK-A 63 DIN 69893 - B-axis ±120 - Y-axis ±100 mm - 60-fold chain magazine - Absolute, direct path measuring systems in X-, Y- and Z-axis - Hydraulically movable tailstock with foot pedal - Double switch filter - Electric handwheel - DMG MORI IoT connector - Clamping pressure adjustment on the control - 5-axis simultaneous machining; Control: CELOS X with Siemens SINUMERIK ONE Main drive 1Drive power (100% DC)14 kWDrive power (40% DC)17 kWSpeed range- 5000 rpmTorque (100% DC)275 NmMax. torque (40% DC)345 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-15000 rpmDrive power (40% DC)22,5 kWDrive power (100% DC)19 kWTorque (100% DC)85 NmTorque (40% DC)120 NmFloor space/WeightDimensions (L x W x H)5,77 x 2,33  ...

AVIA FNE 50N CNC milling machine was built in 1998 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A. The machine is fully operational and has been regularly serviced throughout its service life. The AVIA FNE 50N was designed for precision machining of workpieces made of, e.g. steel, cast iron or aluminium. The machining process is performed inside a large work space by means of a reliable spindle with stepless rotational speed adjustment. When removed from the head, the spindle can operate both vertically and horizontally, with the same parameters. The work table with a length of approximately 1250 mm and a width of 500 mm, on the other hand, has T-slots for easy mounting of workpieces and tooling. All this is complemented by an intelligent HEIDENHAIN controller, offering convenient operation and access to many advanced functions. The AVIA FNE toolroom milling machine weighs 3000 ...

complete in standard version with: - Fully automatic electronic control with Program selector switch RINSE-GLUE-GLUE/DRIVE - Dowel feeding via electronic vibratory conveyor with potentiometer for infinitely variable adjustment of the dowel conveying capacity - Automatic dowel diameter and dowel length control with Auto-DL-Selekt system (automatic ejection of incorrect dowel lengths +/- 5 mm into the collection container) - Closed glue system with 6 bar glue pressure via glue nozzle for glues with a viscosity of 150 to 2,250 mPas - Stepless electronic glue quantity adjustment with potentiometer by means of time preselection by electronic control - Glue/water selector switch for rinsing/cleaning the glue system with EasyClean function button (automatic cleaning program for glue hose and glue nozzle via spray funnel and dirty water collection container) - Control lamp for glue r ...

Code 171305 Description CNC surface grinding machine Make DANOBAT Model PSG - 1000 Serial No. 30102 A Control Fanuc 210i - M Year 2001 Tablesize 1000 x 500 mm Grinding surface L x W x H 1000 x 600 x 450 mm Long ( X axes ) 1150 mm Cross ( Z axes ) 500 mm Speed table movement 1 – 30 m/min. Max. distance table – centre grinding wheel 650 mm Max. workpiece weigth 1500 kg Max. table load 1500 kg Magnetical plate size L x W 1000 x 500 mm Grinding stone dim. Stone x Wide x Taper Ø 400 x 100 x Ø 127 mm Spindel power 7,5 kW Spindel speed 1500 rpm Motor power 7,5 kW – 380 Volt Total electr.com. 20 kW Total space L x W x H 3950 x 3150 x 2550 mm Weight 5500 kgs Accessoiries Elec. Magneticplate 1000 x 500 mm Coolant with paperfilter Digital readout Grinding stones, etc. Condition Machine is in g ...

Code 0739 DESCRIPTION CNC Universal toolroom milling machine Make Maho Model MH 700 C S/N 75915 Year 1984 Control Philips CNC 432 Table 900 x 500 mm Longitude ( X – axis ) table 700 mm Vertical ( Y – axis ) table 450 mm Cross ( Z – axis ) spindle 500 mm Spindle out ( H/V ) 100 mm Max. distance table / spindle horizontal 700 mm Max. distance spindle / table vertical 500 mm Spindle taper 40 ISO Speeds 20 – 3150 rpm Feeds X-Y-Z 1 – 3000 mm/min Rapides 6 m/min Spindle motor 8 kW - 380 Volts Accessories Table 900 x 500mm Condition Machine is in good condition

Hello

Specifications Bottero 108F Flat Poly Flat Glass Grinding Machine The Bottero 108F Plat Poly is a robust and precise glass grinding machine, designed for grinding and polishing flat glass edges in an industrial production environment. This used unit from 2004 works correctly and is ideal for companies looking for a reliable machine for daily edge finishing. Technical specifications Model: Bottero 108F Flat Poly Year of construction: 2004 Machine type: Straight-edge grinder (flat + poly) Number of grinding heads: 8 Machining: Flat edge, Polished edge, Deburring, Polishing Glass thickness: 3–40 mm (typical for this model) Transport system: Powered chain conveyor with glass guide Cooling system: Water-cooled grinding sections Speed ​​control: Variable adjustable Connections: 400V power supply, Water inlet/outlet Machine condition: Functioning we ...

Code 9602 DESCRIPTION Vertical JIG Grinder Make HAUSER Modell 3 SMO Serial No. 257 Machine No. 1519-2564 Table surface 600 x 320 mm Table movement longitude (X) 400 mm Table movement cross (Y) 250 mm Max. grinding diameter Ø 190 mm Column-Spindle 300 mm Max. height under spindle 500 mm Vertical movement spindle 90 mm Vertical movement grindinghead 500 mm Max. speeds grindingspindle up to 80.000 omw./min Weight 2000 kg Total power 6,6 kW – 380 Volts Accessories Grinding spindles, etc. Condition Machine is in good condition

Specifications The Bavelloni SB10 is a robust, industrial edge finishing machine for grinding and polishing flat glass. This model is known for its reliability, ease of operation, and long service life. Ideal for manufacturing companies seeking an affordable and proven solution for daily edge finishing. Specifications Model: Bavelloni SB10 Year of construction: 1992 Type: Single-sided edge finishing machine Edits: Straight edge Arris (facet) Polishing Number of spindles: 10 Glass thickness: 3 – 30 mm Flow rate: adjustable Power supply: 400V – 3 phases Cooling system: integrated water circulation Condition of the machine The machine is functional and complete Mechanically in good condition for its age Electrically operated Suitable for overhaul or direct use in less intensive production Can be demonstrated working (if applicable) Price & Delivery Price: o ...

Code 101237 Description Universal Cylindrical Grinder Make WMW Heckert Model SA 5 U x 630 Serial No. 3115 Year 1981 Grinding length, max. 630 mm Grinding diameter, max. 275 mm Centerheight 140 mm Max. Weight workpiece 125 kg Table tilting angle - 5° till + 11,5° Diam. Grinding wheel 500 mm Width Grinding wheel, max. 100 mm Motorpower grindingwheel 5,5 kW Speeds workpieceholder 31,5 – 710 rpm Total power 12,5 kVA 380 Volts Machine size L x W x H 3,9 x 2,3 x 1,6 meter Weight 4800 kg Accessories coolant with magnetic some tooling Condition Machine is in good condition

Code 71139 DESCRIPTION CNC Center lathe with 2 axis Make P B R Model T 30 SNC x 1500 S/N 30 H / 87 Year 1996 Control Siemens Sinumerik 805 Distance between centers 1500 mm Max. swing 630 mm Max. swing over slide 330 mm Spindle bore 105 mm Spindle speed in 2 ranges stepless ( in program ) 7 – 310 / 44 - 2000 rpm Motor power 15 kW Connected load 33 KVA Machine weight 5500 kg Accessories 8 ATC Duplomatic toolholder R 10 Hydraulic 3 chuck Ø 315 mm 1 fixed steady with 320 mm bore 1 open steady cooling equipment Condition Machine is in good condition

Code 81176 DESCRIPTION CNC Center lathe with 2 axis Make P B R Model T 30 SNC x 3000 S/N 30 – S / 80 Year 1995 Control Heidenhain Manual Plus ( 1998 ) Distance between centers 3000 mm Max. swing 630 mm Max. swing over slide 330 mm Spindle bore 105 mm Spindle speed in 2 ranges stepless ( in program ) 7 – 310 / 44 - 2000 rpm Motor power 15 kW Connected load 33 KVA Machine weight 6000 kg Accessories 3 chuck of 315 mm 1 fixed steady 1 open steady cooling equipment Condition Machine is in good condition

Drilling capacity in steel (diameter): 80 mm Thread cutting in steel: M 80 x 4 mm Projection: approx. 500/2500 mm kl./gr. Distance between contact surface and drill pinole: 650/2300 mm Pinole stroke: 500 mm Table clamping surface: 1250 x 2800 mm Speeds: 9 - 1800 rpm Feeds: approx. 2 - 1250 mm Spindle drive: 7.5 kW Weight: 12000 kg Space requirement: 4000 x 1280 x 4100 mm

UHLMANN BLISTER LINE Ideal for pharmaceutical production in cleanrooms, fully automated and modular, easy to integrate into existing production lines. Comes from a GMP-compliant cleanroom environment, regularly maintained, comes with complete technical documentation and has been decommissioned for internal production. Consisting of: 1) UHLMANN BLISTER PACKER, MODEL UPS 4 Year of construction: 2006 PRODUCTION CHARACTERISTICS - Output: 15-50 cycles/min - Forming width: 62 - 226 mm (min - max) - Blister format: min. 60 mm; max. 140×39 mm - Depth: pvc 12 mm; alu 10 mm DIMENSIONS - Weight: 4.950 kg ENERGY CONSUMPTION - Voltage: 3/N/PE AC 400 V - Current: 30 A 2) UHLMANN CARTONING MACHINE, MODEL C2206 Year of construction: 2005 PRODUCTION CHARACTERISTICS - Max. output: 200 cartons/min. - Closures: tuck-in, hot-melt - Products: ...

Code: 0400 Brand: SCM GENIUS Model: M 10/SI Universal 6-works combined machine with 3 motors for woodworking, joinery, furniture, custom-made furniture , window and door frames, doors and various Specifications: Three-phase motors V.380/50 Surface planer: Total table length 1400 mm Table width 300 mm N° 3 blades Motor Hp 3 Thickness planer: Max planing width 300 mm Max planing thickness 150 mm Feed speed 7 mt/min Table lifting by handwheel Circular saw: Max blade diameter 250 mm Hole 20 Max cutting height 85 mm Max cutting width 700 mm Blade tilt 0–45° Motor 2 Hp Panel saw: Flag-type sliding carriage mounted on a movable bar Spindle moulder: Spindle diameter 30 mm Vertical stroke 120 mm Spindle speed 3000/4500/6000/7500 rpm Max tool diameter 150 mm Max spindle projection over table 100 mm Motor 2 Hp Mortising machine: Table dime ...

IBERICA SPDK-105 • Reference ID: PP-59169 • Category: Flatbed Die Cutter • Manufacturer: Iberica • Model: SPDK-105 • Year: 2013 • Condition: Good • Location: Europe • Availability: Immediately • Speed: 7,500 sheets/hour • Maximum sheet size: 750 x 1050 mm • Minimum sheet size: 350 x 400 mm • Maximum cutting area: approx. 740 x 1050 mm • Cutting pressure: approx. 300 tons • Suitable for carton: approx. 90 – 2,000 g/m² • Suitable for corrugated board: up to approx. 4 mm • Non-stop feeder system • Non-stop delivery system • Automatic sheet feeding • Central lubrication system • Touch screen control panel • PLC-controlled operation system • Double sheet control • Front and side register system • Quick-lock die change system • Safety covers and light barriers • High-pile automatic feeder • Waste stripping unit ...

Code 0733 DESCRIPTION CNC Universal toolroom milling machine Make DECKEL Model FP 4 MA S/N 2204-1372 Year 1987 Control Grundig - Contour 2 Table 800 x 460 mm Longitude ( X – axis ) table 485 mm Vertical ( Y – axis ) table 380 mm Cross ( Z – axis ) spindle 385 mm Spindle quill 80 mm Spindle taper 40 ISO Speeds 63 - 3150 rpm Feeds X-Y-Z 2 - 3000 mm/min Rapides 3 m/min Spindle motor 3,7 / 4,4 kW – 380 Volts Accessories Table 800 x 460 mm Coolant Condition Machine is in good condition

Code 1810 DESCRIPTION CNC Universal milling machine Make TOS Model FNG 63 CNC S/N 16663 Year 1991 Control Heidenhain TNC 355 Table 1120 x 630 mm Longitude ( X – axis ) table 800 mm Vertical ( Y – axis ) table 500 mm Cross ( Z – axis ) spindle 630 mm Spindle movement ( H/V ) 100 mm Spindle taper 40 ISO Speeds 20 - 4000 rpm Feeds X-Y-Z 1 – 7500 mm/min Rapides 7,5 m/min Spindle motor 11 kW – 380 Volts Accessories Table 1120 x 630 mm Coolant Condition Machine is in normal condition

Code: 0403 Brand: SICAR Model: BRAVA 350/3 - CE Standard 3-works combined machine (Surface planer /Thickness planer /Mortiser) for wood, joinery, furniture, joinery fittings, plastics and various – CE Standard Technical specifications: Working width 350 mm Work surface length 1600 mm Tilting of fenknives Knives dimensions 350 x 20 x 3 mm Thickness planer table dimensions 350 x 660 mm Max working height 220 mm Min working height 7 mm Feed speed 7 mt/min Router: Table dimensions 250 x 500 mm Longitudinal stroke 200 mm Transversal stroke 100 mm Vertical stroke 90 mm Chuck 16 mm Chuck rotation speed 5700 rpm Workpiece clamping presser Three-phase motor 2,2 Kw Overall dimensions mm 1700 x 950 x 1000 h Weight kg 340