129,238 used machines on RESALE, but how to find them? Machine Search
Packaging system for dosing and filling granules into pre-made pouches and vacuuming of the pouch. Work steps: Removal of the bag, dosing of the granulate by means of a scale, forming the bag into a brick shape before filling, vacuuming and sealing of the bag. Suitable for granular materials such as coffee beans, cereals, rice, animal feed, seeds, beans, peanuts, salt, chemical fertilizer, etc. PLC controlled, operation via touch screen. Suitable for poly bags. - Specifications: filling range: 500-5000g | accuracy: = 5g | max. speed of the machine in neutral: 9 cycles/minute | power: 380V, total 5kW | compressed air: 0,85m?/min, 6-8bar | dimensions of the machine: L2260xW2925xH2500mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stoc ...
Vertical filling machine, servo driven, for liquids OR pastes into pillow-bags. Including liquid dosing device (for high OR low viscosity liquids/pastes). - Specifications: max. speed of the machine in neutral: : up to 70 cycles/minute | suitable for volumes from 0-1000ml | filling temperature: up to 80?C | accuracy: +/- 1.0% (depending on product) | max. film width: 430mm | bag size: max. 340x210mm | 1.5m?, 6bar | 220V, 4.8kW. OMRON encoder to control bag length, PANASONIC/Autonics print mark sensor, 7 touchscreen, OMRON PLC, AIRTAC pneumatic pars, OMRON PID temperature control, electronic parts from SCHNEIDER / OMRON. Stainless steel version (SS304), including hot printer (2 lines, 10 characters). Dosing equipment: Pump with filling range of 100-1000ml, 40 liter hopper tank with double wall with warm water circulation. Machine dimensions and weight: L1080xW1300xH1400mm, 550kg Please no ...
Vertical form and filling system for liquids into Doypack-Style bags (stand-up pouch). Including liquid dosing device (for high viscosity liquids). Pneumatic transmission system, computer controlled, easy operation and adjustments. Suitabel for a wide range of films: PE/PA/PET, PE/PA, PE/PET, PE/BOPP, PE/AL/PET, etc. - Specifications: packaging volume: 100-550ml | bag size: L(120-180)xW100-150)mm | max. speed of the machine in neutral: 25 cycles/minute | accuracy: +/- 1.5% | 220V, 1.7kW | 0.4m?, 6bar | machine dimensions: L1450xW930xH2370mm | weight: 330kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In ad ...
Vertical form and filling system for liquids into Doypack-Style bags (stand-up pouch) with integrated system to add caps. Including liquid dosing device (for high viscosity liquids). - Pneumatic transmission system, computer controlled, easy operation and adjustments. Suitabel for a wide range of films: PE/PA/PET, PE/PA, PE/PET, PE/BOPP, PE/AL/PET, etc. - Specifications: packaging volume: 100-550ml | bag size: L(120-180)xW100-150)mm | max. speed of the machine in neutral: 25 cycles/minute | accuracy: +/- 1.5% | 220V, 1.0kW | 0.4m?, 6bar | machine dimensions: L3700xW1000xH2550mm | weight: 400kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are a ...
Vertical filling machine for liquids OR pastes into pillow-bags. Including liquid dosing device (for high OR low viscosity liquids/pastes). - Specifications: max. speed of the machine in neutral: 50 cycles/minute | suitable for volumes from 0-1000ml | filling temperature: up to 80?C | accuracy: +/- 1.0% (depending on product) | max. film width: 430mm | bag size: max. 340x210mm | 1.5m?, 6bar | 220V, 4.8kW. SCHNEIDER film pulling motor, PANASONIC/Autonics print mark sensor, 7 touchscreen, OMRON PLC, FESTO pneumatic parts (horizontal seal), other parts from AIRTAC, OMRON 4 way temperature control, electronic parts from SCHNEIDER / OMRON. Stainless steel version (SS304), including hot printer (2 lines, 10 characters). Dosing equipment: Pump with filling range of 100-1000ml, 40 liter hopper tank with double wall with warm water circulation. Machine dimensions and weight: L1080xW1300xH1400mm, ...
Vertical filling machine for liquids into 3-side-seal- or pillow-bags. Including liquid dosing device (for high viscosity liquids). Twin filling layout for high capacity. Can be linked to CIP system to have an automatic circulating system to guarantee clean feeding pipes. The packaging material is sterilized by UV lights inside the machine to assure a clean environment for the packaging material and the liquid product. Contamination of the liquid product can be reduced during the packaging process to have a longer shelf life. - Specifications: max. speed of the machine in neutral: 100 cycles/minute | suitable for volumes from 200-1000ml | accuracy: +/- 1.5% | max. film width: 320mm | bag width: 100-160mm (depending on pouch type) | bag length: 95-165mm | 0.7m?, 6bar | 380V, 3.9kW | machine dimensions: 1700x1100x2950mm | weight: 720kg. That machine/system is available in different version ...
Vertical filling machine for low-viscosity liquids into pillow-bags. Including liquid dosing device. Suitable for laminated compund films like BOPP/PE and others. - Specifications: max. speed of the machine in neutral: 70 cycles/minute | suitable for volumes from 50-500ml | stepless bag length regulation | accuracy: depending on water level product | max. film width: 30-100mm | bag size: max. L80-150xW30-100mm | without air pressure | 220V, 1.75kW | stainless steel version (SS201 in housing, contact material part SS304) | machine dimensions: L1120xW900xH1950mm | weight: 480kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediate ...
Vertical filling machine for low-viscosity liquids into pillow-bags. Including liquid dosing device. Suitable for laminated compund films like BOPP/PE and others. - Specifications: max. speed of the machine in neutral: 60 cycles/minute | suitable for volumes from 100-1000ml | stepless bag length regulation | accuracy: depending on water level product | max. film width: 50-200mm | bag size: max. L50-250xW50-200mm | without air pressure | 220V, 1.95kW | stainless steel version (SS201 in housing, contact material part SS304) | machine dimensions: L1120xW920xH2050mm | weight: 500kg Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations fr ...
Vertical filling machine for low-viscosity liquids into pillow-bags. Including liquid dosing device. Suitable for laminated compund films like BOPP/PE and others. - Specifications: max. speed of the machine in neutral: 70 cycles/minute | suitable for volumes from 20-100ml | stepless bag length regulation | accuracy: depending on water level product | max. film width: 30-150mm | bag size: max. L50-220xW30-150mm | without air pressure | 220V, 1.7W | stainless steel version (SS201 in housing, contact material part SS304) | machine dimensions: L790xW600xH1780mm | weight: 400kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately ...
Vertical filling machine for low-viscosity liquids into pillow-bags. Including liquid dosing device. Suitable for laminated compund films like BOPP/PE and others. - Specifications: max. speed of the machine in neutral: 200 cycles/minute | suitable for volumes from 10-50ml | stepless bag length regulation | accuracy: depending on water level product | max. film width: 30-80mm | bag size: max. L50-110xW30-80mm | without air pressure | 220V, 1.7kW | stainless steel version (SS201 in housing, contact material part SS304) | machine dimensions: L790xW600xH1780mm | weight: 400kg That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately fr ...
Vertical filling machine for low-viscosity liquids into pillow-bags. Including liquid dosing device. Suitable for laminated compund films like BOPP/PE and others. - Specifications: max. speed of the machine in neutral: 200 cycles/minute | suitable for volumes from 5-20ml | stepless bag length regulation | accuracy: depending on water level product | max. film width: 30-80mm | bag size: max. L50-110xW30-80mm | without air pressure | 220V, 1.7kW | stainless steel version (SS201 in housing, contact material part SS304) | machine dimensions: L790xW600xH1780mm | weight: 350kg That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately fro ...
Vertical packaging machine specially designed for the cosmetics industry for the production of round bags and for 4-side sealed double chamber bags. The completely round side sealed bags are produced at 2 pieces per cycle. When changing the bag type, time is needed for changeover, which requires technical experience. A dosing pump for creams, fluids, etc., is included and is selected on the basis of customized product requirements, which results in the respective specifications. PLC LCD touch display from Siemens, automatic program-Set-Up, mark sensor, stainless steel (SS304) version including hot printer (production date, etc.). - Specifications: bag sizes: customized | film roll width: max. 320mm | suitable for composite and single-layer aluminium, PE, BOPP and PP films, paper | max. speed of the machine in neutral: 40 cycles/minute (corresponds to 80 round bags or 40 double chamber ba ...
Vertical packaging machine, high speed machine with continuous reciprocating sealing jaws motion, suitable to do pillow and gusset bags, MITSUBISHI PLC, WEINVIEW touch screen operator interface, automatic program set-up, mark sensor registration control, quick change former assembly, servo motor sealing unit, servo motor film pulling, double pulling possible. - Specifications: bag size: L(50-300)xW(50-240)mm (single pulling) | film width: 130-510mm | max. speed of the machine in neutral: 180 cycles/minute | stainless steel | 380V/9.0kW | 6bar, 0.25m?/min | machine dimensions: L1700xW1300xH1700mm | weight: 700kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for ...
Vertical packaging machine, high speed machine with continuous rotary sealing jaws motion, suitable for pillow bags, MITSUBISHI PLC, WEINVIEW touch screen operator interface, automatic program set-up, mark sensor registration control, quick change former assembly, servo motor sealing unit, servo motor film pulling, double pulling possible. - Specifications: bag size: L(80-500)xW(70-265)mm (single pulling) | film width: 170-560mm | max. speed of the machine in neutral: 180 cycles/minute | stainless steel | 380V/7.5kW | 6bar, 0.25m?/min | machine dimensions: L1500xW1200xH1620mm | weight: 700 kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machine ...
4-lane VFFS for the packaging of granulates, powder or liquids in center sealed bags, optionally also for 3- and 4-side sealed bags (extra charge). Servo motors for fast film feed. Suitable for all sealable mono and composite films as well as laminated films. Further features: Touch screen operating monitor, automatic program setup, mark sensor, date/batch printer. - Specifications: max. machine cycle rate in idle mode: 4x60 cycles/minute (corresponds to max. 240 bags/min) | bag sizes: L(50-250)xW(55-102)mm | film width: 520-900mm | power: 380V, 6,3kW | compressed air: 1,4m?/min, 6bar | machine dimensions: L1800xW1600xH1760mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from appr ...
max. wheel diameter: --- mm gear width: --- mm max. module: --- min. module: --- total power requirement: --- kW weight of the machine ca.: --- t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SEDIN 1516 Vertical Turret Lathe Turning diameter: 1600 mm Table diameter: 1400 mm Max workpiece height: 1000 mm Max table loading: 5000 kg Max horizontal ram travel: 630 mm Max horizontal carriage travel: 975 mm Max vertical ram travel: 700 mm Max vertical carriage travel: 1000 mm No of feed carriages: 16 Carriages feed range: 0,07-12,5 mm/rev Distance between table and ram: 0-1225mm Fast stroke: 2000 mm/min Main motor power: 30 kW Speeds range: 4 - 200 rpm Dimensions: 3190x3360x4100 mm Weight: 19200 kg Side support
Vertical Flow Wrapper VPX250 + Servo Screw Dosing SDX Rovema VPX 250/400 flow-wrapping machine, overhauled, incl. repainting RAL 9007, Siemens S7 machine control and operation Condition: very good Hours: 150 Availability: immediately Refurbished: 2021 Vertical Flow Wrapper VPX250 Machine equipped with sealing system for heat-sealable packaging materials (e.g. paper/bonding films 60-100μ), with e.g.: - Cross sealing jaws 270 mm - Corrugation cross sealing jaws horizontal 12.0 2.0 mm / to be determined by foil sample - Longitudinal seam sealing jaw 420 mm - Temperature controls via machine operation, incl. monitoring - Sealing temperatures are set via Siemens program and stored per program - New foil cutting blade, pneumatically controlled Capacity: flat tubular bags: up to a maximum of 80/min. Log bottom bags: up to a maximum of 55/min. Depending on bag format ...
Vertical band saw PEHAKA type SM 4Fabr. No. 27060 Year of construction approx. 1980Projection 380 mmTable size 620 x 480 mmCutting height 250 mmRoller diameter 400 mmWorking height 1120 mmSaw blade length min. 2900 - max. 3100 mmSaw blade speed 22-125 m/min. infinitely variableMotor power 0.6 / 0.75 kWNet connection 380 volts, 50 Hz- infinitely variable saw blade speed via Vario belt drive with lever adjustment and 2 motor speeds- Saw table tiltable +/- 15- Saw blade butt welding machine IDEAL BS 0-16-
Technical data: Complete retrofit year 2003 CNC Fagor 8055T Working diameter 5,000mm Table diameter 4,500mm Table speed 35rpm Z axis travel 1,500mm nr.02 RAM capto C8 tool holder Maximum workpiece height 2,500m main motor power 182 Kw nr.02 chip evaders permissible weight on the table 63 ton Machine in excellent condition available unless sold.
Vertical Variable Speed Bandsaw with Stationary Table manufacturer:T-JAW Taiwan model:1000 Height Under Guide 325mm throat, Band to Column 1000mm Blade Speed: 20-394m/min Blade Width 3-25mm Blade Length 4670mm Size of Main Table 740×680mm Size of Auxiliary Table 679×477mm Tilt, Main Table 15° R, 15° L Motor 2HP fűrészlapvezető Infinitely variable speed. The band tension is cushioned. The upper wheel could be adjusted for band tensioning. Hand wheel controlled speed. Adjustable saw blade guides. Machine light is fitted. Change speeds while the machine is in operation, without stopping, without pulley changes. Cast iron frame to minimize machine vibration. Machine Size 1690×760×1890mm Net Weight 780kgs
The machine underwent a general overhaul in 2015 The following tasks were performed as part of the overhaul: repair of the electrical cabinet and hydraulics, scraping of the bed and table, replacement of bearings in the headstock, new springs for the axial bearings, new table piston rod and sleeves, installation of sludge separators. Documentation for the machine is available. Year of manufacture: 1980.
Technical data shown on picture. Parts shown by hand not come.
Rafamet KCFB-320 Vertical Boring Mill 125.98” Table Diameter, 137.79” Max. Turning Diameter, (2) Swiveling Ram Heads, 39.4” Ram Stroke, +/- 30 Degrees Ram Swivel, 98.4” Height Under Rail, 0.8-40 RPM Table Speeds, 55,000 Lbs. Table Capacity, Pendant Controls, 2-Axis Quadra Check Digital Readouts, Side Head, Threading & Taper Turning, 75 HP Table Motor, S/N 126240
Rafamet KCFB-320 Vertical Boring Mill 125.98” Table Diameter, 137.79” Max. Turning Diameter, (2) Swiveling Ram Heads, 39.4” Ram Stroke, +/- 30 Degrees Ram Swivel, 98.4” Height Under Rail, 0.8-40 RPM Table Speeds, 55,000 Lbs. Table Capacity, Pendant Controls, 2-Axis Quadra Check Digital Readouts, Side Head, Threading & Taper Turning, 75 HP Table Motor, S/N 126240
1 Pc Used Single Column Carousel Lathe Make STANKO Mod. 1514 Bauj. 1988 Face plate diameter 1400 mm Circumferential diameter 1600 mm Turning height 1000 mm Workpiece weight 8 t Face plate speed range 3Stages 1 - 355 rpm Main drive motor 55 kW Machine weight approx. 25 t CNC SIEMENS SINUMERIK 810T 1 pc. used two-stand vertical lathe Brand STANKO Mod. 1514 year of construction 1988 Face plate diameter 1400 mm Swing diameter 1600 mm Turning height 1000 mm Workpiece weight 8 t Face plate speed range 1 - 355 rpm Main drive motor 55 kW Machine weight approx. 25 t CNC SIEMENS SINUMERIK 810 T
Carnaghi Ø 1700 mm CNC Chuck dia.: 1600 mm Max turningdia -- passage: 1700 mm Max hight of workpiece Z-axis: 1000 mm Command: E.C.S CNC 2600 Turret: yes Qty Tools: 7 Coolant pump: yes
Carnaghi ABH 1550 - Ø1600 mm Chuck dia.: 1200 mm Max turningdia -- passage: 1400 mm Max hight of workpiece Z-axis: 1000 mm Command: E.C.S CNC 1400 TOOLING: yes Turret: yes Qty Tools: 7 Coolant pump: yes
Band saw CENTAURO SP600 AVAILABLE FROM JANUARY 2026
max diam 1830 , table diameter 1600 , sinumeric 840 d . 2 x vertical
Mitutoyo 570-313 Digital Height ruler
Brown & Sharp Tesa Hite 350 Digital Height Gauge 007.30041
Mitutoyo HDS-G24 Digimatic Height Gauge HDS
GENERAL Project No.: 905789 Quantity: 1 pcs. Manufacturer: BUDERUS Type: BDG 220 Control: Siemens 840 D solutionline Year of Make: 2020 Condition: Used machine Spindle Approx (hrs): 3000 Shifts machine one approx. (hour): rarely used DESCRIPTION GRINDING Max. workpiece diameter 440 mm Max. workpiece height 150 mm Travel in X 170 mm Max. rapid traverse speed in X/Z 30 m/min Max. feed speed in X 0.01-15 mm/min Max. speed workpiece spindle 1000 1/min OTHER EQUIPMENT Workpiece probes for measuring thickness deviation Gate sensor Splash protection cladding with fully encapsulated working area Automatic work room door Lighting in the work area Mechanical oil/emulsion mist extraction system Coolant device with paper belt filter High pressure pump 25 bar Mobile control unit for set-up operation with electronic handwheel Machine condition light Au ...
Type: Ultrix 800 RT The Ultrix 800 RT is a multifunction machining center with 5 interpolated axes and a moving gantry for high-speed milling, turning, grinding, drilling, tapping, finishing, deburring, and roughing of complex parts. When used for turning gt; vertical lathe: - swivel range: 1100 mm - maximum weight of the workpiece: 700 kg - 40/30 kW on the table - max. torque on the table: 1500 Nm - maximum speed of the table: 1000 rpm - hydraulic clamping on table - tool taper for turning: KM63 - 150-position tool changer with 24 tool positions for turning When used for milling, grinding, drilling, ... gt; machining center: - X-axis: 800 mm - Y-axis: 900 mm - Z-axis: 600 mm - A-axis: -30° / 110° - C-axis: continuous - maximum weight of the workpiece: 700 kg - 55/40 kW on spindle - max. torque on the spindle: 22 Nm - max 40,000 rpm - tool taper for milling: HSK-E40 - 150-position to ...
De TVM 302 ( meetbereik ~320 mm / ~12 inch) heeft de volgende typische specificaties: Meetbereik: 320 mm (12 inch) Maximaal toegestane fout: 0,02 mm Herhaalbaarheid (2 s): 0,005 mm Frontale vierkantheidsafwijking: 0,02 mm Resolutie: 0,01 mm / 0,001 mm (of in inches .0005/.00005) afhankelijk van het beeldscherm Meetkracht : ca. 3 N Maximale verplaatsingssnelheid van de handmatige wagen : 1500 mm/s. Gegevensuitvoer: Opto-RS232. laboaragon.com+1 Bedrijfstemperatuur : +10 °C tot +40 °C; Opslag: -10 °C tot +40 °C. Gewicht (gietijzeren voet): ~6 kg. 4 keer op voorraad
Offered is a Deckel FP4NC vertical milling machine with Heidenhain TNC 355 control. Year 1987, including tool cabinet as well as various tools. Travel distances: X/Y/Z: 560mm/500mm/410mm, dimensions X/Y/Z: approx. 1800mm/1600mm/2000mm, weight: approx. 2400kg. Viewing is possible by appointment.
Professional packaging machine from a renowned European manufacturer. Suitable for packaging catalogs, magazines and magazines, for example. The print product is fed to the machine and detected by a sensor. It is then automatically passed through the machine and foiled in the process. The packaged product is transported to working height via a conveyor belt. Technical data: -Packaging capacity up to 1200 products per hour. -220-230V / 50-60 Hz. -Forming shoulder machine. -Flat film of different thicknesses. -Sealing seam crosswise / back sealing seam lengthwise. -Independent hot-wire welding rails (impulse welding). -Electronic temperature control. machine can be moved and locked via castors. Setting options / options on the display: -piece and production counter. -Pressure longitudinal welding gun. -Pressure cross-welding gun. -Pressure guide wheels. -Welding time. - ...
Professional packaging machine from a renowned European manufacturer. Suitable for packaging catalogs, magazines and magazines, for example. The print product is fed to the machine and detected by a sensor. It is then automatically passed through the machine and foiled in the process. The packaged product is transported to working height via a conveyor belt. Technical data: -Packaging capacity up to 1200 products per hour. -220-230V / 50-60 Hz. -Forming shoulder machine. -Flat film of different thicknesses. -Sealing seam crosswise / back sealing seam lengthwise. -Independent hot-wire welding rails (impulse welding). -Electronic temperature control. machine can be moved and locked via castors. Setting options / options on the display: -piece and production counter. -Pressure longitudinal welding gun. -Pressure cross-welding gun. -Pressure guide wheels. -Welding time. - ...
max. wheel diameter: 150 mm gear width: . mm max. module: 5 min. module: 0,5 Control: . total power requirement: . kW weight of the machine ca.: 10.000 t dimensions of the machine ca.: 6500 × 2700× 3600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 150 mm max. module: 5 min. module: 0,5 Control: weight of the machine ca.: 10.000 t dimensions of the machine ca.: 6500 × 2700× 3600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ID3701 Nordmeyer 3/14 year/Baujahr 2012 19.400 hours/hours Drilling rig, 219 mm head, up to 600 m drilling depth, jaws 344 Drilling rig, 219 mm head, up to 600 m drilling depth, jaws 344
max. wheel diameter: 150 mm max. module: 5 min. module: 0,5 Control: weight of the machine ca.: 10.000 t dimensions of the machine ca.: 6500 × 2700× 3600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 150 mm gear width: . mm max. module: 5 min. module: 0,5 Control: . total power requirement: . kW weight of the machine ca.: 10.000 t dimensions of the machine ca.: 6500 × 2700× 3600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
