slotting machine vertical used for sale

Auction-ID: A1-45771-50

Size 360 mm Details Joint burning Available Direct

FLOOR SCRUB CLEANING machine DAEWOO DAFL50A NEW, NEVER USED, YOM 2022 COMPLETED BY EL. BATTERY AND CHARGER NETTO WEIGHT 160 KG TWO AVAILABLE LOCATION - POLAND WE HAVE ADDITIONAL TWO SIMILAR CLEANING MACHINES KREMER KR-FL50A IN NEW CONDITION AND THE SAME PRICE.

Two-station machine for articles up to 5 ltr. Extruder 90/24D, quadruple head 4 x 45 mm center to center. Clamping force 83 kN. 460V 60 Hz Good condition

Viewing by appointment. Auction-ID: A1-40256-91

Year: ca. 2001 Serial No. R11/47, Roundpile Feeder with Overhead Digital Panet, HSS Gluing System, 1st Station: 4 Pockets, 2nd Station: 4 Pockets, 3rd Station: 2 Pockets, MBO X Mobile Knife for 32 Pages, Pressing Delivery

Single-station machine for articles up to 5 ltr. Extruder 80/24D, double head 160 mm center to center. Trim cutting in the machine. 460V 60 Hz Good condition

Storage capacity 5 liters. Auction-ID: A1-40256-118

Viewing by appointment Auction-ID: A1-40256-29

In 2020, the machine was extensively overhauled for 7000 €. Proof available. Processes: - Chamfering 60° - Longitudinal turning up to a maximum of 40 mm - Centering drilling Workflow fully automatic: - Tensioning, feeding to - Rapid traverse forward - Work feed - Dwell time for cutting - Rapid traverse back - Relax, feed on Specifications: workpiece diameter approx. 80 mm workpiece diameter 6kt-SW 70 mm min. workpiece diameter round and 6kt 10 mm min. workpiece length 450 mm Speed range infinitely variable Level I/Stage II = 51-306/102-612 Electrical equipment 220/380 V, 50 Hz Motor power main motor kW 1.3/1.8 Engine power Coolant motor kW 0.07 Required air pressure 6-8 bar Weight approx. 520 kg Dimensions: L 1520 mm x W 610 mm x H 1350 mm Roller conveyor

Viewing by appointment. Auction-ID: A1-40256-50

FOR SOFT DOUGH

VACUM DIVIDER

CLIPPER

small handy machine from Swabia

very well preserved automatic machine with/without motor reel

Maximum label height 24cm Auction-ID: A1-46397-207

Auction-ID: A1-45979-161

Data sheet attached Auction-ID: A1-46813-47

SMT Lathe 80001350 The machine was designed and manufactured to produce rotor shafts for power tools. The machine is designed and manufactured to perform the following operations automatically. - Load/unload parts automatically from/to tool carrier line with a pick-up & placement unit between the shaft ends. - Rotate ring seat + flat rotate commutator + rotate commutator. - Ring mounting - Commutator side - Ring mounting - Drive wheel side The machine has several production programs to produce different parts. Each program uniquely corresponds to a wave type Specifications Anchor wavelength from up to 92.5 - 163.1 mm Bearing pin diameter commutator side 8; 10; 12.5 mm Drive side 12; 8 mm Min. Available length bearing position 3.6 mm Package diameter 52; 55; 59 mm Ring dimensions Outer diameter 40 - 57.4 mm Inner diameter 37.4 - 56 mm Ring width 4 - 8 mm R ...

GeneralUniversal Machining Centre with rotating viewing panel and Electronic handwheel; Control: 3D-Control Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical60000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical60/40/40 m/minWorking area 1Longitudinal2100 mmCross2100 mmVertical1250 mmMiscellaneousClamping SystemDIN 69872 Tool changerApplicationUniversal Type of magazineChain Type of gripperDouble gripper Universal milling head with controlled B-axisUniversal milling head with controlled B-axis SK 50 Continuously positioning universal milling head (B-axis) with integrated motor spindle for 5 axes positioning and simultaneous machining. - swivel angle: from horizontal position to max. 250° (70NC rotary tableType of Measuring system Direct measuring systemTable surface Ø 1700 mmCentre bore 50H6 mmCabineFull protection cabin4. Axes (swivelling r ...

GeneralUniversal Machining Centre; Control: 3D-Control Heidenhain TNC 640 Technical DataRapid traverse longitudinal/transverse/vertical60/60/60 m/minFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minWorking area 1Longitudinal1600 mmCross1600 mmVertical1100 mmTool changerApplicationHorizontal Type of magazineWheel Type of gripperDouble gripper Number of tools60 MiscellaneousClamping SystemDIN 69872 NC rotary tableType of Measuring system Direct measuring system4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 15 rpmDistance between T-Slots 125 mmNumber of Slots 9Slot width 18 mmMaximum load (table centre) 4500 KgCentre bore 50H6 mmTable surface Ø 1600 x 1250 mmChip removal2 worm conveyors in the machine bed convey into a chip conveyor (scraper type conveyor), with interval control, placed at right angles. discharge height: 950 mm / 37.4 in width: 580 ...

This belling machine from Thyssen Nothelfer is a very complete line. The line is disassembled and has a throughput of up to 10m pipe length. – Brand: Thyssen Nothelfer – Year built: 1996 – Max. tube Ø: 500mm

mobile sword folding unit

Foil wrapping machine with shrinking tunnel manufacturer: Gramegna type: Champion year of manufacturing: 2000 capacity: up to 7.000 bph for wrapping PET bottles into foil and shrinking afterwards

With the device, upper and lower parts were previously joined together and pressed. Components are Kuka Scara KRC2sr Robot BJ 2010 Pneumatic control Electrical control with frequency converter 4 conveyor belts Description Robotor Type KR 5 scara R350 Working space volume KR 5 scara R550-Z320: 0.264 m3 Repeatability (ISO 9283) KR 5 scara R350: ±0.015 mm Reference point Working space Intersection of axes 3 and 4 Weight approx. 20 kg Datalatt Robot

This 4-axis Romi GL 350B CNC Horizontal Turning Center was manufactured in 2014. It features a maximum workpiece diameter of 350 mm and a spindle speed of 4,000 rpm. The machine includes a counter spindle with a speed range of 6 – 6,000 rpm and a tool turret with 12 positions. If you are looking to get high-quality turning capabilities, consider the Romi GL 350B machine we have for sale. Contact us for further details.

This 3-axis GHIRINGHELLI M300SP610 CNC3A was manufactured in 1993. It features a grinding wheel diameter of 610 mm and a maximum wheel speed of 35 m/s. The machine is equipped with an automatic loading and unloading system, enhancing productivity. If you are looking to get high-quality centerless grinding capabilities, consider the GHIRINGHELLI M300SP610 CNC3A machine we have for sale. Contact us for further details.

UV curing machine The product is a system designed for curing silicone. Due to the UV curing, the machine can probably also be used elsewhere. Manufacturer: Hereaus Curing: UV curing Operating voltage: 400 V Control voltage: 24 V Rated current: 16 A Fuse: 25 A Frequency: 50 Hz Year of construction: 2017 Among other components used: Heraeus P300MQ Motori Elettrici 71M/2 engine Condition: used Complete plant closure, large selection of mezzanines, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Arburg 420C-1000-350 (174) with challenge tape Item number: 174 Availability: In stock Year of construction: 2001 Brand: Arburg Specifications Spray weight: 210 g Clamping force: 1,000 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 420x420 mm Clamping plate size: 570x570 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 89,240 h Weight: 3430 kg Dimensions: 4.4x1.7 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes

A column drilling machine is offered. Drilling capacity: 32mm, spindle holder: MK3, table clamping surface X/Y: approx. 450mm/350mm, speed range: 100rpm - 1600rpm, control system: manual. Equipped with quick-action drill chuck, height-adjustable drilling table, foot switch. Weight: approx. 480kg, overall dimensions X/Y/Z: approx. 600mm/800mm/1850mm. Inspection possible by arrangement.

Labeling machine CAVAGNINO&GATTI – Self-adhesive labeling machine •Year of construction: 2002 • Speed: 10,000 B/h • 3 self-adhesive stations • Separate stainless steel control panel. •14 heads. • Direction of rotation: Counterclockwise • Format parts are included in the offer • Security protection.

Labeling machine CAVAGNINO&GATTI – Self-adhesive labeling machine •Year of construction: 2003 • Speed: 10,000 B/h • 3 self-adhesive stations • Separate stainless steel control panel. •14 heads. • Direction of rotation: Counterclockwise • Format parts are included in the offer • Security protection.

A column drilling machine is offered. Drilling capacity: 40mm, spindle holder: MK4, table clamping surface X/Y: approx. 550mm/450mm, speed range: 25rpm - 3000rpm, control system: manual. Equipped with machine vise, height-adjustable drilling table, coolant system. Weight: approx. 850kg, overall dimensions X/Y/Z: approx. 1000mm/700mm/2100mm. Inspection possible by arrangement.

working width 520 mm Total dressing table length 2250 mm chip removal 5 mm Thickness planing table dimensions 520 x 850 mm Feed speed on thickness planer 6/12 m/min Min./max. working height on the thickness planer 3.5 ÷ 240 mm Main motor power 7 kw Suction nozzle diameter Ø 120 mm Air consumption 1000 m³/h

Herma H400 Semi automatic wrap labeller Herma semi automatic wrap labeller, Allen Hotfoil Encoder, with spares and manual, all mounted on stainless table, 1Ph

Key data: 520 , 9

L'invincibile fs 7 with tersa and aid attack Usable working width mm 520 Planing shaft diameter (number of blades) mm 120 (4) Engine power kW (hp) 9 (12) Dressing planer Total table length mm 2300 Dressing stop dimensions mm 1200x190 Adjustable dressing stop from 90° to -45° Thickness planer Workpiece storage (min./max.) mm 3/250 Feed speed m/min 5-8-12-18 - Spiral Wave Xylent - WITHOUT AID ATTACK EXPORT PRICE

A gang drilling machine is offered. Number of spindles: 3, drilling capacity: 8mm, spindle holder: B12/MK1, table clamping surface X/Y: approx. 1050mm/300mm, speed range: 450rpm - 4500rpm, control system: manual. Equipped with quick-action drill chucks, solid cast iron base, emergency stop switch. Weight: approx. 480kg, overall dimensions X/Y/Z: approx. 1200mm/850mm/1700mm. Inspection possible by arrangement.

A universal milling machine is offered. Travel paths X/Y/Z: 400mm/200mm/400mm, table clamping surface X/Y: 700mm/280mm, tool holder: SK40, speed range: 40rpm - 2000rpm, control system: 3-axis digital display. Equipped with vertical milling head, machine vise, coolant system, work light. Weight: approx. 1100kg, overall dimensions X/Y/Z: approx. 1200mm/1100mm/1700mm. Inspection possible by arrangement.

A universal milling machine is offered. Travel paths X/Y/Z: 400mm/200mm/400mm, table clamping surface X/Y: 700mm/280mm, tool holder: SK40, speed range: 40rpm - 2000rpm, control system: manual. Equipped with vertical milling head, angle table, spindle guard, coolant system. Weight: approx. 1100kg, overall dimensions X/Y/Z: approx. 1200mm/1100mm/1600mm. Inspection possible by arrangement.

I sell a double end cutting and milling machine FRIULMAC IDRAMAT, built in 2007. Working width up to 2500mm Configuration left side / fix: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 KW 1 + 1 pcs. groove saw units front + rear with jump Configuration right side / movable: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 KW 1 pcs. special milling unit on top / 5.5 KW Material pressure band with support from above. Special design, also suitable for side dimensioning. Continuous machine. Siemens Simantic control panel. Condition Very good. Available the same.

Redpack P200 Flow wrapper Serial: 660 Stainless flow wrapper, 5500mm overall length with 3500mm infeed, 300mm jaw width, max product height 120mm,

Double cone kneader Werner & Pfleiderer DK 150

pdf attached

A bed milling machine is offered. Spindle drive: 25kW, table clamping surface X/Y: 1250mm/500mm, travel paths X/Y/Z: 1000mm/500mm/600mm, tool holder: ISO 40, feed rate: 0mm - 3000mm/min. Equipped with CNC control, coolant system, electronic handwheel, machine weight: approx. 4200kg, machine dimensions X/Y/Z: approx. 2800mm/2400mm/2500mm. Inspection possible by arrangement.

A universal milling machine is offered. Travel paths X/Y/Z: 400mm/400mm/400mm, table clamping surface X/Y: 700mm/460mm, tool holder: SK40, speed range: 31.5rpm - 3150rpm, control system: CNC (Deckel Dialog 4). Equipped with vertical milling head, angle table, machine vise, coolant system, splash guard tray. Weight: approx. 1650kg, overall dimensions X/Y/Z: approx. 2000mm/1600mm/1900mm. Inspection possible by arrangement.

A surface grinding machine is offered. Grinding area X/Y/Z: 500mm/200mm/350mm, table clamping surface X/Y: 500mm/200mm, grinding wheel diameter: 225mm, speed: 2800rpm, control system: manual. Equipped with magnetic clamping plate, dressing device, coolant system. Weight: approx. 1800kg, overall dimensions X/Y/Z: approx. 1800mm/1400mm/1800mm. Inspection possible by arrangement.

A surface and profile grinding machine is offered. Grinding area X/Y/Z: 600mm/250mm/470mm, table clamping surface X/Y: 600mm/200mm, grinding wheel diameter: 250mm, speed range: 1000rpm - 4500rpm, control system: CNC. Equipped with magnetic clamping plate, dressing unit, coolant system. Weight: approx. 3200kg, overall dimensions X/Y/Z: approx. 2600mm/2100mm/2400mm. Inspection possible by arrangement.

Spiral kneader Diosna SP 160 AD - extendable spiral kneader - for a maximum of 160kg of dough or.max 100kg of flour - with 2 timers - Automatic switching on and off via clocks - Stainless steel flour dust cover - 2 speeds (gears) - Boiler locking via pliers operated with hydraulics - suitable for almost all doughs - Vat capacity 260 liters

Auction-ID: A1-46768-32