sliding table saw used for sale

Reciprocating Saw BOSCH PFZ 550 PE 1998, S/N 863180400, Case

Equipped with water pump, roller saw table, detachable feet Auction-ID: A1-45866-23

Auction-ID: A1-45793-105

Year of construction 2021.12 Auction-ID: A1-45866-39

In pvc storage case Complete with 2x battery and 1x battery charger Auction-ID: A1-45866-27

Auction-ID: A1-45793-123

Complete with 3x AP300 battery and 1x battery charger Auction-ID: A1-45866-35

Auction-ID: A1-45793-91

equipped with hydraulic lowering system; adjustable in degrees; working width approx. 355mm Auction-ID: A1-43332-13

Festool Guide Rail ; FS 300/2 Auction-ID: A1-45866-25

Year of construction 2019.1 Auction-ID: A1-45866-38

incl piece of feed conveyor and extra hydraulic bundle clamp Auction-ID: A1-45793-10

measuring length 7500 mm Auction-ID: A1-45793-122

circular angle saw for cutting logs Type: D9 Duplex+LH8 Manufacturer: StrojCad Year: 2018 Hours: 10000 mth Logs max: 800 mm Max log length: 8000 mm Saw blade width: 500 mm Max. lumber size: 180/180 mm, in the mode of wide boards 310/180 mm 2x discharge conveyors 1x loading conveyor 1x sorting tipping conveyor Automatic sorting of cuts Machine weight: 19500 kg Centralized lubrication system, dispenser, cabin Machine in good condition, fully functional, under power Find more here - / Contact us at -

Offer 25488 Hydr . Metal - Mitre Band Saw Machine Technical data: - Saw blade dimensions 3320 x 27.0 x 0.9 mm - Infinitely variable cutting speeds N 15 to 100 m/min - hydr. Material vise - Mitre adjustable left up to 60°, right up to 45° - Cutting range at 90° around 280 mm - Square 260 mm - flat 330 x 260 mm - Cutting range at 45° li + re around 250 mm - 45° li flat 270 x 200 mm - 60° li flat 170 x 170 mm - Drive 400 V / 2.2 kW - Coolant device - Chip clearing brush - Weight approx. 1300 kg - Space requirement approx. W 1800 x H 1900 x D 1950 mm

Holtec mobile cross-cut saw Type PICCOLO Year of manufacture 2011 CE Cutting length of the sword 1540 mm Suitable for cross-sections of max. 1150 x 1150 mm Motor power 7.6 kW, 14.5 A, 400 V, 50 Hz

Code: 0367 Brand: STROMAB Model: PS/50 F - CE Standard Manual pendulum saw for cutting boards, wooden packaging, furniture, window and door frames, sawmills, and various - CE Standard Blade diameter 500 mm Hole 30 Blade speed 2800 rpm Motor 7,5 Hp Cutting capacity mm 510 Cutting depth mm 145 Manual feed Infeed roller table mm 2000 Outfeed roller table mm 2000 Suction inlet diameter mm 150 Weight kg 350

VERTICAL BAND SAWING MACHINE Inv. No. 12.895Z1 Make MÖSSNER Model SSF520 Wheel diameter 520 mm Table dimensions 750 x 800 mm Throad dept 510 mm Passage under upper guide 380 mm Cutting speeds Variables 18-160/240-2280 m/min Motor power 5.5 KW Net weight 1000 kg Max. thickness for fusion cutting 15 mm Including: Coolant Mushroom shaped emergency stop Auction-ID: A1-45737-117

Serial Number: 77653 • Power: 43 kW • Controller: Selco OSI / NC410 • Additional Notes: Power supply 380 VAC, 3-phase, 50 Hz; rated current 81 A; pneumatic air supply 7 bar; suction air speed 30 m/sec; wiring diagram VB003; Weight: ~11,000 kg; Software: Selco OSI, NC410 (release 2.x manuals present); Total switched-on time: ~16,301 h; Total worked material volume: 133.8 m³; Auction-ID: A7-40553-14

DOUBLE HEAD CUTTING MACHINE Inv. No. 13.109Z1 Make MECAL Model SW-453 Mach. No. 9001099 Year 2002 Useful cutting length 4.000 mm Max. lame diameter 500 mm Pneumatic inclination of the heads 90° / 45° - 22.5° Including: External inclination Feeler Auction-ID: A1-45737-169

Weight: approx. 2000 kg Dimensions (L x W x H): approx. 2000 x 1500 x 3500 mm Technical details: Power: Unknown Vertical cutting blade configuration Large band wheel housing Manual/mechanical adjustment systems Safety guards installed Equipment: Integrated roller conveyor system for material feeding Description: Industrial vertical band saw designed for cutting wood, typically used in sawmills or wood processing lines. The machine is suitable for resawing logs or timber into boards, offering stable operation and compatibility with conveyor-based material handling systems. Auction-ID: A7-46032-26

Auction-ID: A1-45737-10

Cutting Machine General data: Serial number: ELA060523A8 Technical details: Cutting height: 100 mm Cutting width: 600 mm Motor power: 37 kW Voltage: 380 V / 50 Hz Description: Industrial cutting machine designed for processing materials with a cutting width of up to 600 mm and height up to 100 mm. Equipped with a powerful 37 kW motor, suitable for demanding industrial applications. Auction-ID: A7-46032-13

cutting hight at 90°: 200 mm; cutting width: 410 mm; miter square horizontal: 45° - 90° - 25°; miter square vertical: 60° - 90° -30°; roller convoyer/ supporting table: no; saw blade diameter: 520 mm; speed: 2800U/min; motor power: 5 kW; motor brake: yes; suction connection: 100mm; machine length: machine width: Gewicht: 300kg; crosscut and miter saw Typ ZS 200 N  compact and clear saw to cut large-format cross section this machine is characterized by following properties: †clarity by cutting process because saw blade arranged above †extremely large cutting area  with a compact and stable structure â€Â powerful 5 kw three-phase motor with automatic star delta start †fast miter adjustment  - horizontal meter range of 45° †90° †25° - vertical meter range of ca. 60° †90° †30° - acu ...

Manufacturer: Felder Model: K 940 S Year of Manufacture: 2020 Type of Machine : Circular Saw Electrical Data - Voltage: 400 V - Phases: 3~ - Frequency: 50 Hz - Motor power: 4.0 kW - Current consumption: approx. 9.1 A Technical Specifications - Cutting length (sliding table): 2050 to 3700 mm - Cutting width at rip fence: 800 to 1250 mm - Maximum cutting height: 133 mm - Saw blade diameter: up to 400 mm - Blade speeds: 3500 / 4500 / 5500 rpm - Blade tilt range: 90 to 45 degrees Features - X-Roll format sliding table, maintenance-free and high precision - Cast iron saw unit for smooth and stable operation - Electric height adjustment - Scoring unit approx. 1.1 kW Find more here - / Contact us at -

Panel saw Type: WA 8 Manufacturer: Altendorf Year: 2016 Length of the table: 3200 mm Max. saw blade diameter: 400 mm Cutting height: up to 120 mm (depending on the disc) Disc tilt: 0–45° Motor: 5.5 kW (400 V) Pre-cut (pre-cut unit) Aluminum trolley with precise guidance Parallel ruler Angle ruler with stops Machine in good condition, fully functional, under power Find more here - / Contact us at -

An Elumatec double mitre saw for aluminium and plastic profiles, including E200 positioning unit, is available. Saw head swivel: 45°, saw blade diameter: 380mm, speed: 2800rpm, max. cutting capacity: 195mm/120mm, min. cutting length: 520mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible.

cutting height at 90°: 125 mm; cutting width at 90°: 600 mm; width roller convoyer: 600 mm; diameter saw blade: mobile: yes; machine length: 3100 mm; machine width: 1900 mm; machine hight: 1750 mm; weight: ca. 650 kg;

Cutting height at 90Â: 170 mm; Cutting length: 430 mm; Miter range horizontal: 45Â-90Â-25Â; Vertical mitre range: 60Â - 90Â - 30Â; Swivel adjustment with crank: yes; Roller conveyor / support table: yes; Saw blade diameter: 420 mm; Speed: 2800rpm; Motor power: 3 kW; Engine brake: yes; Suction port: 100mm; Length of roller conveyor: 2 x 1500 mm; Machine length: 4000 mm; Machine width: 1250 mm; Machine height: 1550 mm; Weight:

Cutting height at 90Â: 200 mm; Cutting length: 410 mm; Saw blade swivel : yes; Saw blade tiltable: no; Roller conveyor / support table: no; Saw blade diameter: 500 mm; Speed: 2800rpm; Motor power: 5 kW; Engine brake: yes; Feed Brake: Yes, Hydraulic; Suction port: 100mm; Machine length: Machine width: Weight: 110kg;

Cutting height at 90Â: 125 mm; Cutting height at 45Â: 80mm; Cutting length at 20mm cutting height: 545 mm; Cutting length at 125mm cutting height: 450mm; Horizontal mitre range: 0 - 45Â; Miter range vertical: -45Â to +45Â; Roller conveyor / support table: no; Saw blade diameter: 400 mm; Speed: 2800rpm; Motor power: 3 kW; Engine brake: yes; Suction port: 60mm; Table size: 1540mm x 1025mm; Machine length: Machine width: Weight: 180kg;

Cutting height at 90Â: 135 mm; Cutting length: mm; Miter range horizontal: -; Vertical mitre range: -60Â to +60Â; Roller conveyor / support table: no; Saw blade diameter: Speed: 2800rpm; Motor power: 2 kW; Engine brake: yes; Hold-down: yes; Spraying device: yes; Suction port: 100mm; Machine length: Machine width: Weight: 110kg;

Cutting length: 3100mm; Workpiece clamping: pneumatic;

Cutting length: 5300mm; Cutting height: 2100mm; Cutting depth: 80mm; Scorer: no; Feed: manual; Display horizontal cut: Scala; Display Vertical Section: Scala; Saw blade diameter: 300mm; Evasive material pad: yes; Saw blade speed: approx. 4000 rpm; Motor power: 4 kW; Machine length: 6500mm; Machine depth: 1500mm; Machine height: 2800 mm; Weight: 800kg;

cutting length: 3050mm; workpeace clamping: Handrad; suction connection: yes;

Cutting length: 4100mm; Cutting height: 2200mm; Cutting depth: 60mm; Vorritzer: yes; Feed: manual; Display horizontal cut: digital; Display vertical cut: digital; Saw blade diameter: 300mm; Evasive material pad: yes; Saw blade speed: approx. 4000 rpm; Motor power: 4 kW; Machine length: 5300mm; Machine depth: 1800mm; Machine height: 3100 mm; Weight: 800kg; Smooth and ergonomic operationScoring device for tear-free cutting qualitySlatted frame automatically swervesContinuous middle workpiece supportTwo

cutting length: 5300mm; cutting height: 2100mm; cutting depht: 80mm; scoring unit: no; feed: manuell; read out horicontal cut: Scala; read out vertical cut: Scala; sawblade diameter: 300mm; movable material support: ja; Sawblade speed: ca. 4000 U/min; motor power: 4 kW; machine length: 6500mm; machine depth: 1500mm; machine height: 2800 mm; weight: 800kg;

sawing length: 5300mm; sawing height: 2100mm; cutting depth: 60mm; scoring unit: no; feed: manuell; read out horizontal cut: Scala; read out vertical cut: Scala; sawblade diameter: 300mm; evasive workpiece support: ja; speed sawblade: ca. 4000 U/min; motor power: 3 kW; machine length: 6500mm; machine width: 1500mm; machine height: 3000 mm; weight: 800kg;

Cutting length: 5300mm; Cutting height: 2100mm; Cutting depth: 80mm; Scorer: no; Feed: manual; Display horizontal cut: Scala; Display Vertical Section: Scala; Saw blade diameter: 300mm; Evasive material pad: yes; Saw blade speed: approx. 4000 rpm; Motor power: 4 kW; Machine length: 5500mm; Machine depth: 1500mm; Machine height: 2800 mm; Weight: 800kg;

roll diameter: 600 mm; cutting width: 580mm; table tilting: yes; belt speed: motor power: 2,2 kW; motor brake: yes / manual; suction connection: 100mm; machine length: 120mm; machine width: 800mm; machine hight: 2015mm; weight: 200kg;

Roll diameter: 600 mm; Column projection: 585 mm; Cutting depth: 370mm; Swivel table: yes 0 to + 20Â; Table size: 890 x 620 mm; Belt speed: 18 m/min; Motor power: 2.2kw/400V; Engine brake: yes / automatic; Extraction connection: 2 x 100mm; Machine length: 1100 mm; Machine width: 670 mm; Machine height: 2050 mm; Weight: 295 kg;

Roll diameter: 400 mm; Stand projection: 390 mm; Cut depth: 280mm; Swivel table: yes 0 to + 20Â; Table size: 500mm x 450mm; Belt speed: 18 m/min; Motor power: 1.5 kW / 400V; Engine brake: yes / automatic; Extraction connection: 2 x 100mm; Machine length: 780 mm; Machine width: 585 mm; Machine height: 1735 mm; Weight: 125 kg;

Depth of cut at 90°: 200 mm; Depth of cut at 45°: 140 mm; Cutting width at 90°: 420 mm; Cutting width at 45°: 295 mm; Miter range horizontal: 45° -90° -25°; Miter range vertically: 60° -90° -30°; Sawblade diameter: 520 mm; rpm: 2800 U/min; Motor: 5 kW; motor brake: yes; suction plant diameter: 100 mm; weight: 490 kg; suitable for: wood, PVC, alu cross-cut and mitre saw with maximum cutting height of 200mm stable grey cast iron construction precise ball bearing guide of the tool slide on hardened and ground steel shafts manual saw feed fast mitre adjustment up to 25° horizontal and 30° vertical readjustable fixed stops at 90° and 45° lower saw blade protection can be connected to extraction system machine mounted on mobile machine base with 1.5 m long roller conveyors left and right left side with scale and stop slide

Roll diameter: 700 mm; Column projection: 670 mm; Cut depth: 430mm; Swivel table: yes 0 to + 20Â; Table size: 700 x 930 mm; Belt speed: 18 m/min; Motor power: 3kw/400V; Engine brake: yes / automatic; Extraction connection: 2 x 100mm; Machine length: 1260 mm; Machine width: 750 mm; Machine height: 2230 mm; Weight: 420 kg;

Roll diameter: 800 mm; Stand projection: 785 mm; Cut depth: 500mm; Swivel table: yes 0 to + 20Â; Table size: 1130 x 800 mm; Belt speed: 18 m/min; Motor power: 4 kW / 400V; Engine brake: yes / automatic; Extraction connection: 2 x 100mm; Machine length: 1590 mm; Machine width: 880 mm; Machine height: 23900 mm; Weight: 620 kg;

Roll diameter: 440 mm; Stand projection: 390 mm; Cut depth: 280mm; Swivel table: yes 0 to + 20Â; Table size: 500mm x 450mm; Belt speed: 18 m/min; Motor power: 1.5 kW / 400V; Engine brake: yes / automatic; Extraction connection: 2 x 100mm; Machine length: 780 mm; Machine width: 585 mm; Machine height: 1735 mm; Weight: 190 kg;

Roll diameter: 600 mm; Column projection: 580 mm; Cutting depth: 370mm; Swivel table: yes -0 to + 20Â; Table size: 810 x 580 mm; Belt speed: 1660m/min; Motor power: 2.2kw/400V; Engine brake: yes / automatic; Extraction port: 2 x 120mm; Machine length: 1190 mm; Machine width: 800 mm; Machine height: 2063 mm; Weight: 295 kg;

Kaltenbach metal saw type KKS 400E Technical data: - Description: see data sheets - CE