sliding table saw used for sale

Tip height: 195 mm Center width: 1250 mm large recirculating Ø over bed/support slide: 400/265 mm Spindle Holder/Bore: Camlock D1-6"/54 mm Tailstock quill taper: MK 5 Spindle speeds infinitely variable in 3 groups: 0 - 2500 rpm Feeds longitudinal: 0.018 - 1.2 mm Feed plan: 1/2 of the longitudinal feeds 51 metric thread pitches: 0.2 - 14 mm 56 Inch Thread: 2 - 56 Gg/" 20 module threads: 0.2 - 3.5 module 20 Diametrical Pitch Threads: 8 - 56 DP electr. Connection: 400 V, 7.5 kW Weight: 1500 kg Space requirement: 2500 x 1300 x 1300 mm

Specifications: Tip height: 140 mm Turning length: 500 mm Accessories (included): Lunette Multifix "A" Collets 0.5 – 24 mm Milling device (Y-axis) 3-jaw chuck 125 mm Cs Urh Axexlr Hkszorh Face Plate 260 mm Running tip Chuck Die stock 4-jaw chuck Coolant pump Instruction manual (German)

Tip height: 355 mm Center width: 3000 mm large circulation Ø over bed/recess/bed slide: 715/790/520 mm Spindle bore: 86 mm Spindle holder according to DIN 55027: Gr. 11 Tailstock quill taper: MK 5 21 spindle speeds: 5.6 - 560 rpm 42 feeds longitudinal/flat: 0.09 - 5.6/0.045 - 2.8 mm 22 Whitwort Thread: 2 - 28 Gg 28 metric thread pitches: 1 - 14 mm 27 module thread pitches: 0.25 - 3.5 module 32 module threads: 4 - 56 module 32 Diametrical Pitch Threads: 8 - 112 DP Drive motor, pole-switchable: 380 V, 7/11 kW Weight approx.: 7 t Approx. space requirement: 6000 x 2300 mm

Offer 25432 Specifications: - Turning diameter 320 mm - Center width 750 mm - Largest turn – Ø over bed 550 mm - via flat slide 175 mm - Spindle bore 32 mm - Spindle holder - Pick-up cone of the tailstock quill MK 3 - Quill stroke 180 mm - 18 spindle speeds 85 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches -Thread - Module thread - Diametrical Pitsch thread -Arbor - Cheek chuck -Lunette - Drive 400 V / 2.2 kW - Space requirement approx. W 2100 x D 750 x H 1300 mm - Weight approx. 750 kg

Manufacturer: Optimum Year of construction: 2024 Condition: as good as new, workshop tested Delivery time: immediately available Specifications Tip height: 165 mm Center width: 830 mm Circumferential diameter over bed: 330 mm Circumferential diameter over face slide: 208 mm Swivel length in the bed bridge: 430 mm Speed ranges: 16 steps, 70–2000 rpm⁻¹ Drive motor: 1.5 kW, 400 V, 50 Hz Spindle holder: Camlock DIN ISO 702-2 No.4 Spindle bore: 38 mm Spindle cone: MK5 Tailstock mount: MK3, quill stroke 110 mm Weight: approx. 512 kg Machine dimensions (LxWxH): 1685 × 745 × 1590 mm Gradients and feed Metric: 0.4-7 mm/rev (26 pitches) Inches: 56-4 Gg/1" (34 pitches) Longitudinal feed: 0.052–1.392 mm/rev (32 feeds) Face feed: 0.014–0.38 mm/rev (32 feeds) Accessories: Fixed bezel (Ø 6–50 mm) Rotating bezel (Ø 8–3 ...

Weiler Commodor – lead and pull spindle lathe (partially overhauled, built approx. 1990) Condition: Partially overhauled, very good general condition Year of construction: approx. 1990 Manufacturer: Weiler Model No.: Commodor Machine Type: Lead and Pull Spindle Lathe Technical data (approx. information): Max. turning diameter over bed: 380 mm Max. turning diameter over support: 190 mm Max. turning length: 1000 mm Bar Passage: 56 mm Speed range: 25 – 2000 rpm Spindle Nose: A2-6 Drive power: 4.0 kW Tailstock: MK4 Automatic longitudinal and flat feeds: 0.011 – 0.80 mm/rev Thread ranges: Metric: 0.3 – 10 mm Inch: 80 – 2 3/4 G/" Diametrically Pitch: 80 – 5.5 Dp Module: 0.2 – 5 Dimensions (L x W x H): 2200 × 1200 × 1800 mm Weight: approx. 1500 kg ⚙️ Equipment & Accessories: 3-Axis Digital Display SINO (New)  ...

TOS Galanta SUIL 40A – Lead and Pull Spindle Lathe For sale is a well-preserved and mechanically overhauled 2009 TOS Galanta SUIL 40A lead and pull spindle lathe, built in 1998. Specifications Manufacturer: TOS Model: Galanta SUIL 40A Machine number: 0219 Year of manufacture: 1998 (mechanically overhauled 2009) Dimensions: approx. 2.2 m × 1.1 m × 1.75 m Weight: 1620 kg Main drive: 5.5 kW Spindle speed (max.): 3150 rpm Spindle bore: 50.2 mm Center spacing: 1000 mm Center height: 200 mm Turning diameter over bed: 400 mm Condition: ready for use (used) Accessories Three-jaw chuck Tailstock Lunette Coolant Setup Interchangeable Wheel Set Operating instructions (German) The machine is fully functional. Viewing possible by appointment

Digital Center height 150 mm Circulation over bed 300 mm Center width 1000 mm 3-jaw chuck, Arbor Chip protection Chip tray

L+Z Lathe WEILER Praktikant 160 – Partially Overhauled Machine in very good used condition – delivery on order, delivery time by arrangement! ✅ Technical data Year of construction: approx. 1990 Digital Display: 3-Axis (NEW) Max. turning diameter over bed: approx. Ø 320 mm Max. turning diameter via support: approx. Ø 198 mm Max. turning length: approx. 650 mm Bar passage: approx. Ø 40 mm Spindle speed: 96 – 2500 rpm Spindle nose: A 2 - 5 Drive power: approx. 2.2 kW Threading: Metric, Inch, DP, Module Tailstock: MK 3 Dimensions (LxWxH): approx. 1700 x 1000 x 1700 mm Weight: approx. 650 kg ✅ Accessories 3-jaw chuck 160 mm (NEW) Quick-change steel holder + 1 insert Electric Lining Guard (NEW) Work light (NEW) Complete machine documentation Emergency stop Various tension wrenches Coolant Setup L+Z Spindle  ...

Offer 24204 Technical data: - Largest turning diameter over bed 420 mm - Center width 1000 mm - Spindle bore mm - Mounting cone of the tailstock quill MK 4 - Travel of the tailstock quill 200 mm - Spindle speeds 40 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches - Inch thread - Module thread - Drive 400 V - with: - 3 jaw chucks - SWS steel holder with 3 inserts - Space requirement approx. W 2800 x H 1250 x D 950 mm - Weight approx. 2200 kg

Key data: 230 mm, 460 mm, 25 U/min

Optimum D460x1500 lathe – fully functional Description: For sale is a used Optimum lathe D460x1500, built in 2006/01. The machine is fully functional and ready for immediate use in the workshop and production. It is ideal for turning medium-sized metal and steel parts. Technical data: Manufacturer: Optimum Model No.: D460x1500 Year of construction: 2006/01 Circumferential diameter over bed: 460–465 mm Circumferential diameter over upper slide: 270 mm Circumferential diameter without bed bridge: 690 mm Center width: 1500 mm Tip height: 230 mm Bed width: 300 mm Spindle bore: 58 mm Spindle cone: MK 6 Spindle mount: Camlock ASA D1–6 Speed range: 25 – 2,000 rpm⁻¹ Longitudinal feed: 0.031 – 1.7 mm/rev Transverse feed: 0.014 – 0.784 mm/rev Thread metric: 0.1 – 14 mm Thread imperial: 1/2 – 2 gears/inch Motor power ...

Year of manufacture 1980s/90s Technical data: Tip height: 185 mm Center width: 750 mm Turning diameter over bed: 370 mm Spindle bore: 36 mm Bed width: 250 mm Speed range: 38 - 1600 rpm Tailstock mount: MK 3 Quill stroke: 110 mm Dimensions (WxDxH), approx.: 1950 x 900 x 1200 mm Weight, approx.: 800 kg Equipment: - 3-jaw lathe chuck, brand: Röhm, ø 200 mm - Quick-change holder with 4 inserts - Bed stop - Chip tray

KERN - Universal lathe CD 480 - Control - Manual Plus -Built in 1994 -1029 operating hours -Prisms / flat guides hardened -Circulation / turning diameter over bed 475mm -Circulation/turning diameter via face slide 260mm -Slide path / plan 260mm -Turning length 1500mm -Spindle passage 78mm -Speed range (V-constant) 1-3000 rpm -Feed range / plan 0.001-1000 mm/rev -Feed range / longitudinal 0.001-2000 mm/rev -Rapid traverse / plan / longitudinal 5/10 m/min -Tailstock MK 5 - 120mm quill path -Multifix with insert -Röhm - Three-jaw chuck 250mm -Automatic central lubrication -Coolant device -Complete machine documentation Dimensions: LxWxH 3.5x1.4x1.8 meters / Weight: 3000 kg

Leit & Tension Spindle Lathe WEILER COMMODOR 180 GSD / New -Unused -Exhibition machine / zero operating hours -CE marking -3 - Axis Digital Display -Tip width 1000mm -Tip height 180mm -Spindle passage 56mm -Circumferential diameter over bed 380mm -Circumferential diameter via face slide 215mm -Speed range / gearbox 25-2000 rpm -Automatic longitudinal/plane feeds -Thread/Inch/Metric/Diametrical -Tailstock / quill cone MK 4 -Quill stroke 150mm -Coolant device -Multifix with insert -Three-jaw chuck 200mm -Work light -Swarf back wall -Documentation Dimensions: LxWxH 2.6x1.6x1.7 meters / Weight 2000Kg

GALLIC 16 N lead and pull spindle lathe with ACU-Rite digital display - Turning diameter over support 200mm - Turning diameter over bed 320mm - Tip height 160mm - Center width 1000mm - Speed range 45-2500 rpm - Spindle bore 40mm - Automatic feeds X/Z axis LxWxH 2.4x1x1.7 meters / Weight 1600Kg

GDW LZ 350 incl. 3-axis digital display -Tip height 175mm -Circumferential diameter over bed 310mm -Circumferential diameter over face slide 195mm -Tip width 800mm -Spindle passage 43mm -Speed range 45-2000 rpm -Automatic longitudinal/plane feeds -Tailstock / Quill Stroke 110mm -Thread/Metric/Inch etc. -Multifix with inserts -Three-jaw chuck 200mm -Collet device incl. 22 x collets -2x Emergency/Off -Coolant device -Various interchangeable wheels 5 pieces -Drill chuck -Running tip -Swarf back wall -Machine feet -Miscellaneous tools -Documentation Dimensions: LxWxH 1.85x0.9x1.5 meters / Weight 850Kg

VOEST DA 360 - Lead & Pull Spindle Lathe -Heidenhain digital display -Peak height above bed 400mm -Turning diameter over bed 800mm -Turning diameter over support 500mm -Turning length 1000mm -Rod passage approx. 87mm -Speed range 14 - 1000 rpm / 18x speeds -Automatic length / face feeds -Automatic input Z-axis -Tailstock MK 5 -Wedge bar chuck 250mm -Multifix base holder with insert -Work light -Machine feet -Documentation Dimensions: LxWxH 3x1.5x1.7 meters / Weight 3500 KG

Stock number: F936, In stock: Yes, Amount in stock: 1 pc., Item: Sliding-weight balance, Construction: Weighing plate L 1570 x W 1800 x H 230 mm., Outer dimensions: L 1570 x W 2000 x H 1150 mm., Weighing area: 1-2.000 kg., Interval: 1,0 kg., Manufacturer: JAC Nielsen & Co.

WEILER CONDOR VS 2 from university (test laboratory) -Guided tours "as good as new" -Tip height 165mm -Circumferential diameter over bed 330mm -Tip width 800mm -Speed range 28-2800 rpm -Automatic longitudinal/plane feeds -Spindle passage 40mm -Thread/Metric/Inch etc. -Collets - quick clamping device incl. collets -Vierbackenfutter-Röhm -Face Plate -Four-jaw chuck faceplate -Lining protection -Multifix with inserts -Emergency stop -Documentation Dimensions: LxWxH 2x0.8x1.6 meters / Weight 900Kg

Lead & Pull Spindle Lathe EXCELLO - DLZ 500 SL -Tip height 250mm -Turning diameter over bed 500mm -Turning diameter over support 310mm -Center width 3000mm -Rod passage 65mm -Speeds: 28-1400 rpm -Automatic longitudinal/plane feeds -Three-jaw chuck 250mm -Four-jaw chuck 250mm -Multifix base holder with inserts -Bezel -Tool cabinet -Documentation Dimensions: LxWxH 5.5x1.4x1.6 meters / Weight 3500Kg

Guide & Tension Spindle Lathe GEMA LZ 200 -Three - Axis Digital Display "NEW" -Guided tours " VERY GOOD" -Tip height 200 mm -Center width 1000 mm -Turning diameter over bed 400mm -Turning diameter over support 200mm -Spindle passage 54 mm -Automatic longitudinal/plane feeds -Speed range 36-2200 rpm -Tailstock MK 4- Adjustment 200mm -Three-jaw chuck 250mm -Electric lining protection -Multifix with inserts -Coolant device -Work light -Machine feet -Chip tray Dimensions: LxWxH 2x1.2x1.6 meters / Weight 1800Kg

Lead & Pull Spindle Lathe NARDINI MS 125 E -Peak height above bed 150mm -Turning diameter over support 140mm -Tip width 500mm -Spindle speeds 50-2500 rpm -Spindle passage 34mm -Automatic longitudinal/plane feeds -Thread/Metric/Inch -Tailstock MK3 -Collet quick-clamping device with various collets 173E -Tool cabinet with machine-related accessories -Swarf back wall -Documentation Dimensions: LxWxH 1.6xx0.7x1.6 meters / Weight 1200Kg

DESCRIPTION WEILER LZ330 / From Educational Institution -Turning diameter over bed 330mm -Turning diameter over support 165mm -Turning length 800mm -Speed range 25 - 2800 rpm -Automatic / longitudinal plan feeds -Multifix with 3x inserts Hobkn Aujvwctps S Tjl -Drive power 3KW -Three-jaw chuck -Collet device with 20x collets -Copying device -Miscellaneous Accessories -Documentation Dimensions: LxWxH 1.8x0.7x1.6 meters / Weight 750Kg

WEILER Intern 800R Ladder & Pull Spindle Lathe -Turning diameter over bed 300mm -Turning diameter over support 150mm -Turning length 800mm -Spindle bore 42mm -Speed range 40 - 2000 rpm -Automatic longitudinal/plane feeds -Thread/Metric/Inch -Tailstock MK 3 -Drive power 3KW -Multifix with inserts -Three-jaw chuck 160mm -Lining protection -Swarf back wall with work light -Interchangeable wheels -Drill chuck -Rod passage 42mm -Tool cabinet -Documentation Dimensions: LxWxH 1.8x0.8x1.6 meters / Weight 750Kg

1 L + Z lathe Make: Stanko Model No.: 1M-63B Year of Make: 1988 Technical details: Turning diameter over bed: 700 mm Turning diameter over support: 350 mm Turning length: 3000 mm Peak height measured in bed: 320 mm Bore of the working spindle: 70 mm Spindle speed max.: 10 - 1250 / 24 step rpm Cross feed: 0.0256 ... 0.378 mm/rev Longitudinal feeds: 0.064...1.025 mm/rev Tailstock quill adjustment:: 240 mm Tailstock mount MK: MK5 Total power requirement: 14.0 kW Machine weight approx.: 5.0 t Travel support: Support longitudinal=3000mm Support transverse=400mm Tool support=220mm Tool carriage can be swivelled 90° right/left Equipment / Accessories Rapid traverse Machine Lamp Coolant device with pump 2x Bezel 3-jaw chuck

Key data: 170 mm, 350 mm, 3250 U/min

Lead and pull spindle lathe Colchester Master VS 3250 Tip height 170mm Center width max 750mm Circulation over bed max 350mm Circulation via cross slide 196mm Spindle bore 42mm Spindle D1-4" Spindle speeds from 0 - 3250 by means of VFD and 3 gear stages Tailstock MT4 Incl.: Digital display on 3 axes Elesta Quick-change steel holder Multifix with 7 tool holders 2pcs 3-jaw chuck 160 and 250mm with 3 set of jaws Collet holder with lever with 23 collets 173E Kornerspitse Drill chuck Coolant Pump Tool cabinet with tools and manuals Cleaned and maintained

Tip height: 125 mm Center width: 800 mm Gr. turning Ø over bed/over carriage guide: 280/245 mm Spindle holder, thread according to DIN 800 Spindle bore: 24 mm Spindle speeds infinitely adjustable: 26 - 2000 rpm 36 longitudinal feeds: 0.019 - 0.528 mm Metric thread pitches: 0.25 - 6 mm 44 Inch Thread: 4 - 112 Gg/" electr. Connection: 380 V, 0.7/1.4 kW Space requirements: Weight approx.: 500 kg

Tip height: 150 mm Center width: 760 mm Swivel Ø over bed/support slide: 300/165 mm Spindle bore: 32 mm Spindle holder, short taper according to DIN 55027: Gr. 5 Tailstock quill taper: MK 3 12 spindle speeds: 85 - 2000 rpm 48 feeds: 0.006 - 1.77 mm 48 metric thread pitches: 0.1 - 28 mm 58 Inch Thread: 75 - 2.5 Gg/" 19 module threads: 0.1 - 1.75 module 19 Diametrical Pitch Thread: 70 - 4 DP electr. Drive: 220/380 V, 1400 rpm, 2.2 kW Weight: 800 kg Space requirement: 1800 x 770 x 1300 mm

Wooden sliding door sideboard approx. 150b cm, small contents

Sliding door cabinet metal grey 2-door approx. 105x198h cm, no key, without contents

Sliding door cabinet metal beige approx. 200x195h cm, 2 sliding doors, without contents

Sliding door cabinet metal blue 2-door approx. 150x195h cm, 7 shelves

Sliding door cabinet metal blue 2-door approx. 150x195h cm, 7 shelves

Sliding door cabinet GARANT light grey approx. 120x198h cm, 4 galvanised shelves, doors anthracite, to the right of the cabinet

Sliding door cabinet metal grey 2-door approx. 130x95h cm, 3 shelves

Wooden sliding door sideboard, approx. 210x92x50 cm, small contents

Guiding and pulling spindle lathe OPTIMUM "Optiturn 4210 V" With 3 axis digital display Year of Make: 2015 Spindle bore: 54 mm Center width: 1000 mm Center height: 200 mm Speed range: 30 – 3000 rpm Stepless speed with display With the following accessories: Multifix Tool Holder Coolant Setup Three-jaw chuck 0 200 mm Four-jaw chuck 0 250 mm Collet chuck complete with collets up to 0 32 mm Feed protection Chip protection with lighting Fixed Lynette 0 approx. 150 mm Moving Lynette 0 approx. 100 mm 4 Height Adjustable Machine Shoes 1 pc. Rotating centering tip Operating instructions

Office furniture IKEA Galant white Sliding door cabinet approx. 160x125 cm, cabinet approx. 60x185 cm, drawer cabinet approx. 80x80 cm, coat rack white

Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve, clamping sleeve, sleeve -Manufacturer: Helm, sliding gate sleeve, height-adjustable sliding gate sleeve -Type: 1998 Width 80 mm -Thread: M20 -Dimensions: see photos -Number: 7x sleeve available -Price: per piece -Dimensions: 90/115/H140 mm -Weight: 1.8 kg/piece

Kopal Terminus fully automatic sliding gate Total width: 700 cm Passage 500 cm Color : Green Equipped with: sensors, pressure strips, beacon, photocells, hand transmitters, foundation plan and connection diagram. Auction-ID: A1-40102-89

New Kopal Aluette fully automatic sliding gate Vertical slat filling Total width gate: 563cm Passage 400 cm Color : Matt black RAL 9005 Equipped with: photocells, hand transmitters, foundation plan and connection diagram. Auction-ID: A1-40102-88

Sliding gate on rail Manual operation Total width gate: 760 cm Passage 600 cm Colour : Green RAL 6009 Equipped with: guide post, closing post and rail. Exclusively depicted trestle with the gate on it. Auction-ID: A1-40102-90

Lead & Pull Spindle Lathe / WEILER COMMODOR 230 AC -CE marking -Year of construction 2002 -Tip height 230mm -Circumferential diameter over bed 475mm -Circumferential diameter over face slide 270mm -Tip width 1000mm -Spindle speeds 25 - 2000 rpm -Automatic longitudinal/plane feeds -Tapping/Metric/Inch/Module etc. -Spindle head Din 55027 / size 6 -Tailstock MK 4 -Drive power 11KW -Electric lining protection -Multifix base holder with inserts -Three-jaw chuck -Swarf back wall with work light -2x Emergency / Off -Coolant device -Machine feet -Documentation Dimensions: LxWxH 2.6x1.1x1.6 meters / Weight 1900Kg

Weiler Commodor B incl. 3 - axis digital display - GS - Identifier - 3 - Axis digital display - Tip height 180mm - Center width 1000mm - Spindle passage56mm - Spindle speed 25-2000 rpm - Automatic longitudinal + face feeds - Thread / Metric / Inch / Diametrical / Module - Four-jaw chuck - Electric lining protection - 2x Emergency / Off - Swarf back wall - Coolant device - Work light - Multifix with inserts - Documentation Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg

Consists of: 6 pieces sliding door 2100mm wide, 2500mm high, 60mm thick, galvanized frame, draft brushes, guides, rail 4500mm, handle inside and outside side, 2 pieces under guide per door, 15mtr rail for photos with 3 doors, 60 millimeter thick sandwich panels placed in a steel galvanized frame, fire-retardant PIR hard foam that also contributes to the insulation. Auction-ID: A1-40133-214

With key, equipped with 4 adjustable shelves and oak look melamine top Auction-ID: A1-44654-184

With key, equipped with 2 adjustable shelves and oak look melamine top Auction-ID: A1-44654-190

Equipped with 2 adjustable shelves and oak look melamine top top. NOTE this cabinet is without a key Auction-ID: A1-44654-195

equipped with 2 adjustable shelves per cabinet, without keys Auction-ID: A1-44654-321

With key, equipped with 2 adjustable shelves and oak look melamine top Auction-ID: A1-44654-191