We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,627 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13Y Pick-up attachment 34 DA, Controlled clutching device
used
Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13Y Back drilling attachment: 12AD Milling attachment: 14EA Slotting attachment Pick-up attachment 34 DA,
used
Technical data Diameter of work admitted: 10 mm Max. turning length: with flat cames: 60 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1650 rpm up to: 11680 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4 HP Machine´s weight about: 700 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1500 mm Various accessories: Combined 3-spindle attachment: 13Y
used
Technical data Diameter of work admitted: 13 mm Max. turning length:: 70 / 50 with bell cames: 110 / 50 mm Spindle hole: 13.5 mm Number of tool cutters: 5 (8 x 8 mm) Spindle speeds: from: 700 rpm up to: 10000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 1800 kg Overall dimensions machine: Length: 2000 mm Width: 1055 mm Height: 1750 mm Various accessories: Combined 3-spindle attachment: 13Y Controlled spindle stop device O Speed accelerator: VNSA
used
Technical data Diameter of work admitted: 16.00 mm Max. turning length: with flat cames: 80 mm with bell cames: 150 mm Spindle hole: 17.00 mm Max. treading diameter: 12 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 28 from: 485 rpm up to: 5450 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 1450 kg Overall dimensions machine: Length: 2200 mm Width: 1000 mm Height: 1700 mm Various accessories: 3-spindle drilling attachment: 12 V
used
Technical data Diameter of work admitted: 16.00 mm Max. turning length: with flat cames: 80 mm with bell cames: 150 mm Spindle hole: 17.00 mm Max. treading diameter: 12 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 28 from: 485 rpm up to: 5450 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 1450 kg Overall dimensions machine: Length: 2200 mm Width: 1000 mm Height: 1700 mm Various accessories: Speed accelerator: VNSA Variocam 3000 Set of loose pulleys 3 spindle front attachment: 12 V
used
Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 60 mm Spindle hole: 11.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1700 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 800 kg Overall dimensions machine: Length: 1440 mm Width: 900 mm Height: 1600 mm Various accessories: Combined 3-spindle attachment: 13 OA Back drilling attachment: 12 AD Electric control-box Swivelling stop Central lubrification
used
Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 60 mm Spindle hole: 11.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1700 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 800 kg Overall dimensions machine: Length: 1440 mm Width: 900 mm Height: 1600 mm Various accessories: Back drilling attachment: 12 AD Electric control-box Swivelling stop Central lubrification
used
Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 60 mm Spindle hole: 11.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1700 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 800 kg Overall dimensions machine: Length: 1440 mm Width: 900 mm Height: 1600 mm Various accessories: Back drilling attachment: 12 AD Electric control-box Swivelling stop Central lubrification
used
Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 6 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13Y Electric control-box Speed accelerator
used
Technical data Diameter of work admitted: 6.35 mm Max. turning length: with flat cames: 62 mm Spindle hole: 6.35 mm Number of tool cutters: 3 Spindle speeds: Number of spindle speeds: 3 from: 2400 rpm up to: 6000 rpm Turret slide: number of tools: 4 Voltage 50 Hz 3x: 380 Volt Total power required: 2.5 HP Machine´s weight about: 1150 kg Overall dimensions machine: Length: 1500 mm Width: 1000 mm Height: 1600 mm Various accessories: Decoiler Straithening device Coolant system turret
used
Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 6 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13 Y Back drilling attachment: 12 AD Pick-up attachment: 34 DA Electric control-box
used
Technical data Diameter of work admitted: 10 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 10 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1200 mm Width: 900 mm Height: 1450 mm Various accessories:
used
Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 6 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Drilling attachment 12 U Variocam: VNSA Electric control-box Preparation for loader: Barboy Rocker arm with 1/1000 mm
used
Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 6 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Variocam: VNSA Controlled spindle stop device N Electric control-box Preparation for loader: Barboy Rocker arm with 1/1000 mm
used
Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 3.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment Electric control-box Speed accelerator
used
Wisniowski Industrial Sliding Gate 6 x 2 m Brand: Wisniowski Description Opening approx. 600 cm Wing length approx. 800 cm Wing height approx. 200 cm incl. light barrier and 1 transmitter Sliding from the street side on the right, without galvanized base. Including engine and key Color black Photos for orientation Item condition: new
used
Tip height: 250 mm Center width: 1500 mm Circulation Ø: over bed 500 mm Spindle bore: 63 mm Spindle holder: Size 8 Mounting cone tailstock: 5 MK Spindle speeds: 170 - 2240 rpm Feeds: longitudinal/flat 0.014-1/0.0063-0.45 mm/U Thread pitches: 0.1 - 112 mm electrical connection: 380 V, 7.5 kW Space requirement: 2300 x 1000 x 1400 mm Weight: 2360 kg
used
1x Lathe Manufacturer: TOS Type : SUI 80/4000 Year of construction: 2020 Commissioning: 09.2020 Turning length: 4000mm Turning diameter over bed: 800mm Turning diameter via slide: 520mm Speed max: 14-1400rpm Through hole: 92mm Spindle bearing diameter: 140 mm Accessories: - retrofitted frequency converter, - Position indicator 3-AX Heidenhain ND7013, - Quick release head system Multifix D + holder D1D 40180 Machine condition: almost New Delivery time: March 2023
used
Beautiful hamlet intern 160. Centre distance 650 mm Center height 160 mm Turning diameter over bed 320 mm Spindle bore 40 mm Spindle speeds 24-2500 rpm Accessories: Digital display Heidenhain 3 axes 3-claw 160mm Multifix tool holder with 5 holders Collet Equipment Collets 27 pieces
used
Turning diameter over bed 490 mm Center width 1500 mm Spindle bore 63 mm Spindle speed 2240 min-1 Chuck diameter 250 mm 2 x Bezel Tailstock Multifix
new
Figure shows MIOTAL® TC 180 x 1000 Center width: 750 mm Center height: 165 mm Orbit diameter over bed: Ø 330 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0 Diametrical thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 650 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circula ...
new
Center height: 205 mm Orbit diameter over bed: 410 mm Center width: 1000 mm Bed width: 260 mm Spindle nose: DIN 55029 (Camlock) 9, size 6 Travel cross slide: 220 mm Travel upper slide: 125 mm Spindle bore: 52.5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Infinitely variable Mechanical counters: 2 Motor power: 3.75 kW Coolant pump: 0.13 kW Longitudinal feeds Z: 0.05 - 1.7 mm/rev Face feeds X: 0.025 - 0.85 mm/rev Whitworth Thread: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametric thread: (21) 8 - 44 DP Module thread: (18) 0.3 - 3.5 MP Quill diameter: 52 mm Inner cone quilt: MK 4 Quill stroke: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Characteristics: - Tool mesh accuracy according to DIN 8605 - Infinitely variable speed control (2 countershafts) - Finely balanced main spindle - Stable machine bed with hardened and gro ...
new
Center width: 1000 mm Center height: 178 mm Orbit diameter over bed: Ø 356 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0 Diametrical thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circulating oil lubrication, precision-be ...
used
Control and feed spindle lathe Manufacturer Geminis Type GE870 Turning diameter 870mm Turning length 4000mm the machine also has a face plate 900mm and a fine bezel. Guides are very good, no wear to see. 400mm Forkardt wedge bar chuck 3 axis digital display Machine was stored about 3 years ago and is no longer used.
used
Center height: 315 mm Center width: 1000 mm Circulating Ø: 630 mm Spindle bore: 74 mm Spindle holder: Size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 7 - 710 rpm Feeds: longitudinal/flat 0.063-4/0.030-2 mm/rev Thread pitches: 1 - 14 mm electrical connection: 380 V kW Space requirement: 2750 x 1250 x 1380 mm Weight: approx. 4200 kg
used
L+Z Lathe GDW LZ 250 Cdymapnl Center height 125mm Center width 500mm Spindle bore 38mm Connected load 4KW Röhm - Three-jaw lining Digital Collets - Quick clamping device Multifix with inserts Chip back wall Documentation Dimensions: LxWxH 1.4x0.7x1.5 meters Weight 650Kg
new
PRECISION LATHE / HAMLET COMMODOR 180 GSD Year of construction 2022 / NEW MACHINE Tip height 180mm Center width 1000mm Circumferential diameter over bed 380mm Orbit diameter via face slide 215mm Spindle head DIN 55027 - size 6 Spindle bore 56mm Inner cone MK 6 Cgvnfcyuff Main drive 4 KW Speed range 25 - 2000 1/min Number of gear stages / 9 pieces Number of speed stages / 16 pieces Number of feeds - 200 pieces Longitudinal feeds 0.026 - 0.9 mm/rev Feed rates 0.013 - 0.45 mm/rev Thread /metric 0.3 - 10mm Thread / inch 80 - 2.75 g/inch Quill diameter 80mm Quill stroke 150mm Pinolenkegel MK 4 Coolant device Work light Chip back wall 3 - Axis Digital Display Type - Sino Three-jaw chuck - 200mm Quick-change holder with insert Complete documentation Dimensions: LxWxH 2,6x1.3x1,6 Meter Weight 1800Kg
used
WEILER COMMODOR 230 2-axle Heidenhain digital display GS - Identifier Tip height 230mm Center width 1000mm Turning diameter over bed 475mm Circulation diameter via face slide 270mm Rod passage 56mm Speed range 25-2000rpm Automatic longitudinal/flat feeds Thread / Metric / Inch Tailstock MK4 Quick-change steel holder with insert Coolant device Chip back wall Work lamp 2xNOT/OFF Feed protection Three-jaw chuck 200mm Machine feet Documentation Cjr8l82mnl Dimensions: LxWxH 2.5x1.5x1.7 meters Weight 1800 kg
used
WEILER DA 210 / 3-axis digital display Heidenhain Including CE marking - ORIGINAL CONDITION Center height 210mm Center width 1000mm Circumferential diameter over bed 435mm Circulation diameter via face slide 245mm Spindle bore 52mm Speed range 40-2000 rpm Automatic longitudinal / plan feeds Drive power 5.5 KW Cjr3wkhxxx Quick-release holder with 3 inserts Feed protection Work lamp 2x EMERGENCY/OFF Central lubrication Three-jaw chuck - 200mm Documentation Dimensions: LxWxH 2.3x1.2x1.6 meters weight 1400KG Errors / input errors excepted Chip back wall Coolant device
used
Main technical data: Center height: 560 mm Distance between centers: 5000 mm Bar passage: 105 mm The lathe is in good condition, being cleaned and visible at Ns. site.
used
- Rotary Ø: 340 mm - Turning length: 1050 mm - Center height: 170 mm - Speed range: 20 - 2500 rpm - Quill stroke: 160 mm - Lining: Ø 250 mm - 4 -jaws - Spindle passage: 55 mm - Space requirements (W x D x H): approx. 3.1 x 1.1 x 1.5 m - Machine weight: 2,200 kg - Total power: 5.5 kW - Condition: good Accessories 3-jaw chuck Ø 250 mm, face plate Ø 510 mm, Multifix B steel holder with 4 inserts, bezel
used
Used parallel lathe EST TICINO 400 available and visible at our office. Technical data: - CAM-LOCK connection - ELBO 2-axis dimension viewer - Quick checks on the wagon - Spindle brake - Centre height: 400mm - Distance between the centres: 3000mm - Turning diameter on the wagon: 550mm - Table turning diameter: 820mm - Turning diameter on the recess: 1050mm - Bar clearance: 130mm
used
Key data: 417 , 830
Lathe in excellent condition, mechanically like new. Technical data: - Centres height: 417 mm - Distance between the centres: 2000 mm - Spindle hole 113mm - Bench width: 560 mm - Turning diameter on the bench: 830 mm - Turning diameter on the deep hole: 510 mm - Visualization by DRO Available for immediate delivery. Machine in excellent condition, like new!
used
Center height: 160 mm Center width: 880 mm Spindle bore: 48 Bed width: 312 mm Speeds: 45 - 2000 min-1 Motor power: 5.5 kW Tailstock mount: MK 4 Quill stroke: 140 mm Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2250 x 1030 x 1650 mm Equipment: - 3-axis digital display, brand: Sino, new - 3-jaw lathe chuck - Emergency stop impact button - Quick release holder System Multifix - Machine light - Bed stop - Coolant device - Rotating grain tip - Machine shoes - Splash guard back panel -Operating instructions
used
Center height:165 mm Center width: 750 mm Spindle bore: 38 mm Bed width: 195 mm Speeds: (16) 35 - 2480 min-1 Motor power: 2.5 / 2.0 kW Tailstock mount: MK3 Quill stroke: 100 mm Dimensions, approx.: 1650 x 540 x 1450 mm Equipment: - 3-jaw lathe chuck - Emergency stop impact button - Quick release holder System Multifix - Bed stop - Reducing sleeve MK3, MK5 - Splash guard back panel - Interchangeable gears - Jaw chuck protection with limit switch - Coolant device - Operating tool - Service incl. oil change
used
FAM US 400 SW 1000 mm SH 200 mm. 31.3 to 2000 rpm Multifix B
used
Technical data of the parallel lathe Kramatorsk mod. 1A670 used: - Diameter on the bench: 2500 mm - Diameter above wagon: 2200 mm - Spindle diameter: 2500 mm - Distance between tips: 19000 mm - Pallet width with 4 guides: 2300 mm - Weight allowed between the tips: 100 tons - Speed: from 0 to 130 RPM - Motor power: 140 kW - Tailstock cast: Ø 400 mm - New transverse axis ball screws X: Ø 80 mm - CNC: FAGOR 8055 TC - Weight: 150 ton - Dimensions: 25 x 4 x 3.3 m
used
Code 211321230614 Description Centerlathe Make ICOCA Model SJ – 410 x 1000 G Serial No. 8708004 Year 1987 Distance between centers 1000 mm Swing over bed 410 mm Swing over gap 650 mm Swing over cross slide 220 mm Spindle bore 51 mm Number of spindle speeds 12 Spindle speeds 40 – 2000 rpm Feeds Longitude and Cross Motor power 5 kW – 380 Volts Thread cutting Metric, W.W. Accessoiries 3 chuck Ø 230 mm Rapide toolpost Coolant Condition Machine is in very good condition
used
maintenance-free sliding element SANKYO OILLESS SOL 30 x 250 mm ( SOL30x250mm ) New ! Dimensions: 250 x 30 x 32 mm
used
Linear sliding unit IKO Nippon Thompson BSP1045SL 749-317 1951227 Table: 45 x 10 mm travel: ± 20 mm Load capacity: 389 N Material: Stainless steel New Dimensions ( linear sliding unit ): 45 x 10 x 6 mm Dimensions ( packaging ): 65 x 30 x 20 mm
used
Linear sliding unit IKO Nippon Thompson BSR1560SL 749-351 1960315 Table: 60 x 15 mm travel: ± 15 mm Load capacity: 626 N Material: Stainless steel New ! Dimensions ( linear sliding unit ): 60 x 15 x 8 mm Dimensions ( packaging ): 85 x 40 x 20 mm
used
maintenance-free sliding element SANKYO OILLESS 115 x Ø 50 mm Sliding bushing outside Ø 58 mm opening: 36 mm, 55° New ! Dimensions: 128 x 64 x 67 mm
used
Sliding door cabinet, tool cabinet PAGUS 2000 x 650 x 1450 mm ( usable dimension ) 2 sliding doors: 870 x 1330 mm 80 mm 4x shelves: 2000 x 620 mm ( permanently installed ) usable compartment heights ( from below ): 220 / 240 / 250 / 240 / 290 mm used, tested ! Dimensions: 2010 x 700 x 1450 mm
used
Sliding door cabinet, steel cabinet, tool cabinet PAGUS 1425 x 705 x 1365 mm ( width x depth x height ) Internal dimensions: 1420 x 630 x 1230 mm ( width x depth x height ) 2 Sliding doors: 720 x 1225 mm ( width x height ) 5 x Shelf: 1420 x 630 mm (width x depth, height adjustable, 45 mm increments) lockable, without lock ! used, tested ! Dimensions ( cabinet ): 1200 x 415 x 1090 mm
used
A Weiler Primus precision lathe with milling device is offered and extensive accessories in very good condition. A large part of the accessories are unused. Specifications: Center height 120 mm Distance between centers 420 mm Swing diameter over bed 245 mm Spindle bore 23 mm Spindle speeds 18 Speed range 60 - 3000 rpm Motor power 1.1 / 1.5 kW Motor spindle brake Large feed protection - chip protection hood External dimensions approx. Length 120cm Depth 750mm Height 170cm Weight approx. 500 kg Accessories: Multifix A - 5 steel brackets 3-jaw chuck Ø 125 mm 4-jaw chuck Ø 125 mm Various interchangeable jaws Thumper CGN-1969 Eccentric lathe chuck 80mm (unused) Face plate Carrier for rotary heart Standing bezel Moving bezel Collets for internal and external clamping Various moving bezels Extensive accessories for milling equipment such as clamping screws, cl ...
used
Lead and pull spindle lathe WEILER CONDOR incl. new Digital -Original paint -Turning diameter over bed 330mm -Turning diameter over support 170mm -Turning length 800mm -Center height 160mm -Spindle bore 38mm -Spindle speeds 24-2800 rpm -Automatic longitudinal/plan feeds -Tailstock MK3 -Not/Off bcpc8wp9r2w -Total power requirement 3KW -Three-jaw chuck / Four-jaw chuck -Documentation -Multifix with insert Dimensions: LxWxH approx. 1.9x0.9x1.5 meters Weight 850Kg
used
Specifications: Center height: 255 mm Center width: 1450 mm Spindle bore: 63 mm Bed width: 385 mm Speeds: (12) 20 - 1100 1/min Tailstock mount: MK 4 Quill stroke: 150 mm Weight, approx.: 2250 kg Dimensions (LxDxH), approx.: 3100 x 1000 x 1580 mm Equipment: - 2-axis digital display - 3-jaw lathe chuck with a set of additional jaws - 6 inserts quick-change bracket System Multifix - Face plate ø 445 mm - Operating tool
used
Center height: 123 mm Center width: 560 mm Circumferential Ø: above bed 280 mm Spindle bore: 27 mm Spindle speeds: 60 - 1250 rpm Feeds: longitudinal/flat 0.091-2.553/0.046-1.292 mm/rev Thread pitches: 0.25 - 11 mm Electrical connection: 380 V, 0.75 kW Dimensions: 1300 x 700 x 1270 mm Weight: approx. 300 kg
used
Tubular Sliding Hook, Euro Hook, Meat Hook, Meat Hook -Upper part: galvanized flat steel -Lower part: NIROSTA -Number: 60 hooks available -Price per piece -Weight per piece: 3-hook 5 kg / 4-hook 4 kg -Total weight including storage box: 350 kg