sliding table saw used for sale

GeneralUniversal Milling Machine; Control: CELOS X with Siemens 840D SL Operate Technical DataType of main driveAC Drive power (100% DC)16 kWDrive power (40% DC)21 kWSpeed range20 - 15000 rpmSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minClamping SystemHSK-A 63 Rapid traverse longitudinal/transverse/vertical42/42/42 m/minFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgWorking area 1Longitudinal650 mmCross520 mmVertical475 mmDirect measuring systemDirect path measuring systemBenefit PackageBenefit Package consisting of: Swarf conveyor, with cleaned slot screen Internal coolant supply 40bar/600l Air blast through spindle centre Application Tuning Cycle 3D quickSET (pre selection, measuring probe)Spindle speed 15,000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 21 kW / 16 kW (28 hp  ...

Used line for packaging tablets and capsules in PET packaging Line composition: 1. DT PACKAGING SYSTEM UNSCRAMBLER1000S rotary sorter 2. DT PACKAGING SYSTEM CONVEYOR CONTROL conveyor for counters 3. DT PACKAGING SYSTEM CONVEYOR CONTROL conveyor for counters 4. B8P/3DUPLEX counter 5. B8P/3DUPLEX counter 6. Elevator 7. ML657 cap setter 8. Desiccant hopper 9. Cap hopper 10. PACK SERVICE PREALIMENTATORE lid elevator 11. PACK SERVICE TAVOLO ROTANTE PS160 buffer sorting wheel 12. PACK SERVICE TAVOLO ROTANTE PS160 buffer sorting wheel 13. Neri labeler SL200 14. Marchesini MA155 cartoning machine 15. Type C Transporter

table length: 2000 mm table width: 1000 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,45 t dimensions: 2,0 x 1,0 x 0,9 m Welding table / perforated table including accessory set WMT Basic-Set 2.0 The table is made of 25mm high-alloy, plasma-nitrided steel S355J2+N (St 52/3) Surface hardness 850 Vickers Surfaces that have been ground down and planed smooth. Hole diameter: 28mm, countersunk by 3mm 100 x 100mm grid Side panels 200mm Hole spacing in the side panels 50mm, diagonal grid Height adjustable from approx. 830 - 890mm Substructure reinforced with 140 x 15mm flat steel Including base bearings, 110mm diameter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 93 Positionen weight: 320 kg condition: neu : 28 mm dimensions: 1,0 x 0,6 x 0,85 m Special 93-piece set, 28mm system Includes tool trolley Material: Burnished high-quality steel Scope of delivery: see images The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 102 Positionen weight: 320 kg condition: neu : 28 mm dimensions: 1,0 x 0,6 x 0,85 m Special 102-piece set, 28mm system Includes tool trolley Material: Burnished high-quality steel Scope of delivery: see images The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ingredient station ZS 15 Ingredient Station / Ingredient Trolley with 15 pans for ingredients top with worktop for weighing Stainless steel version mobile Used device cleaned

number: 80 Positionen weight: 150 kg condition: neu : 28 mm dimensions: 0,8 x 0,6 x ,05 m Special 80-piece set, 28mm system Material: Burnished high-quality steel Scope of delivery: see images The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hanging cabinet HS 2000 with sliding door with intermediate floor Used device cleaned Dimensions: 2000 x 400 x 600 mm, WxDxH

Work table AT 1400 with stainless steel top Work table Baker's table Stainless steel worktop with gallery at the back Bottom shelf Stainless steel version with 2 doors Approx. dimensions: 1400 x 800 x 850 mm, WxDxH Used device cleaned

Table trolley TW 800 Stainless Steel Table Trolley Worktop top Shelf at the bottom Robust design Dimensions: 800 x 600 x 990 mm, WxDxH Mobile with 2 brake rollers Used equipment / as good as new

Work table AT 4000 with beech wood top mobile Stainless steel work table AT 4000 with beech wood worktop bottom with shelf Drawer block left Dimensions: 4000 x 800 x 900 mm WxDxH Used device cleaned

Work table AT 4000 with beech wood top mobile Stainless steel work table AT 4000 with beech wood worktop bottom with shelf Drawer block left Dimensions: 4000 x 800 x 900 mm WxDxH Used device cleaned

Work table AT 1600 with stainless steel top Work table Gastro/bakery table Stainless steel worktop with gallery at the back Bottom shelf Approx. dimensions: 1600 x 600 x 780 mm, WxDxH Used device cleaned

Work table AT 1200 with stainless steel plate and sliding doors Work table Gastro bakery table Stainless steel worktop Stainless steel version with 2 sliding doors Used device as good as new

Work table AT 500 drawer cabinet Work table Gastro bakery table Stainless steel version with 3 drawers Approx. dimensions: 500 x 600 x 850 mm, WxDxH Used device as good as new

Workbench AT 1600 with stainless steel plate mobile Work table Gastro/bakery table Reinforced construction welded Approx. dimensions: 1600 x 700 x 1000 mm, WxDxH Used device

Work table AT 1880 with stainless steel top Work table Gastro/bakery table Reinforced construction welded Approx. dimensions: 1880 x 700 x 850 mm, WxDxH Used device

Work table AT 2000 with beech wood top and sliding door Work table Baker's table mobile Beech wood worktop Used device cleaned Plate sanded & re-oiled

Work table AT 2000 with beech wood top and flour trolley Work table Baker's table Beech wood worktop 3 ingredient containers on the left Stainless steel flour trolley for 100 kg Used device

Technical data: - Max. load capacity in horizontal position 15000 kg - Face plate diameter 1800 mm - Face plate motorized swivel 0 - 120 ° - Adjustable table height - Rotary movement electr. infinitely variable 0.04 - 0.80 rpm - Right + Counterclockwise - Welding current transmission approx. 500 A - Drive 400 V / 5.5 + 7.5 kW - min. table height in horizontal position approx. 1700 mm - medium table heights at horiz. Position approx. 1900 + 2100 mm - Max. table height in horizontal position approx. 2300 mm - Handheld remote control - Space requirement approx. W 2100 x H 1700 x D 2400 mm - Weight approx. 8500 kg

Dough processing table Treadmill work table without belt 300x122x95cm â Product description • Condition: used, baker's condition • Material: wooden work table, legs made of stainless steel • without belts • on wheels, mobile • Belt depth 31 cm • External dimensions: 300x122x95 cm (WxDxH) Details see pictures

GeneralUniversal Milling Machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross520 mmVertical475 mmTechnical DataType of main driveAC Drive power (100% DC)16 kWDrive power (40% DC)21 kWSpeed range20 - 15000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgDirect measuring systemDirect path measuring systemSpindle speed 15,000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 21 kW / 16 kW (28 hp / 21.5 hp) Torque 111 Nm / 85 Nm (82 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to +110° ...

table diameter: 400 mm table load: . t table height: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The technical data is provided by the manufacturer or operator and is therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find more offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 90 mm, 1250 mm, 900 mm

Inv. Num. : 9038 Type: W 9 Producer: TOS Generated: Parameters: Work table length: 950 mm Work table width: 950 mm X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 900 mm Spindle diameter: 90 mm Equipment: DRO (3 axes) Rear support column Clamping angle Tools

Side table white approx. 80x70 cm, 2 grey conference chairs

Bar table wood dark approx. 65x65 cm, 2 standing stools sheet metal black

Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table -Load capacity: 700 kg -Platform: 2610 x 1000 mm -Roller conveyor: 500 x 2610 mm -Roller spacing: 230 mm -Roller diameter: 40 mm -Dimension retracted: 490 mm -Extended dimensions: 1260 mm -max. stroke: 770 mm -Hand switch -Quantity: 1 piece available -Transport dimensions: 2610/1020/H490 mm -Own weight: 558 kg

Scissor lift table trolley, scissor lift table, scissor lift table, scissor lift, scissor lift, single scissor lift table -Load capacity: 500 kg -Platform: 1260 x 915 mm -Dimension retracted: 500 mm -Dimension extended: 1115 mm -Max. Stroke: 615mm -Quantity: 1 piece available -Transport dimensions: 1420/915/H870 mm -Town weight: 274 kg

Scissor lift table, scissor lift table, scissor lift platform, scissor lift platform, single scissor lift table -with electric driving unit via: frequency converter -Load capacity: 500 kg -Platform: 1500 x 800 mm -Dimension retracted: 310 mm -Dimension extended: 1000 mm -Max. Stroke: 690mm -Transport dimensions: 1500/800/H310 mm -Own weight: 234 kg

Scissor lift table, scissor lift table, scissor lift table, scissor lift, scissor lift, double scissor lift table -Drive for lifting via: 240 volt electric hydraulic pump -Payload: 400 kg -Platform: 700 x 600 mm -Height retracted: 330 mm (without wheels 210 mm) -Height extended: 1140 mm -Max. Stroke: 810 mm -Number: 1x lifting platforms available -Price: per piece -Transport dimensions: 800/600/H330 mm -Own weight: 128 kg

Controlled cross table, cross sliding table, clamping table, clamping plate with T-slots, clamping angle, cross table NC, linear robot, coordinate table -Controlled cross table: was used as a soldering station -Manufacturer: Walko, cross table NC type PNC 500 -Table surface: 600 x 300 mm -Travel approx.: X 500 mm / Y 350 mm -Dimensions: 1050/1030/H1530 mm -Weight: 240 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: Milling machine table -Table surface: 400 x 600 mm -T slots: Slot width 14 mm, slot spacing 50 mm -Rotatable. Manually operated with 6 mounting screws. -tiltable and swiveling: via cranks -Fits Deckel Mikron WMW and other milling machines -Overall dimensions: 700/600/H345 mm -Weight: 198 kg

Reversible clamping device, 4th axis, rotary table, rotary indexing table, controlled rotary table, dividing head, dividing head, rotary indexing table, rotary coupling -Manufacturer: Fibro, Fibroplan rotary table with drive -Type: NC1.03.0340.1.1.04.04 -Table diameter: 340 mm -Clamping: hydraulic -Drive: Indramat servomotor type 112B-0-LD-4-C/180-A-0/Wi533LX/S011 -Number: 2x round table available (one of which has a base plate) -Price: per piece -Dimensions: 660/640/H550 mm (with base plate) -Weight: 420 kg (with base plate) /pc.

Die cutter, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punch press -Manufacturer: Mubea, punch type KL 100 with 2-axis digital display -Pressure capacity: 100 tons -Punching performance: see photo nameplate -Projection: 535 mm -Material table: 1240 x 615 mm -Travel: x= 1100 mm / y= 600 mm -Digital display: Heidenhain 2-axis digital display -Accessories: incl. see photos -Total dimensions: 2200/2020/H2110 mm -Weight: 3145 kg

Industrial Robot, Robot, Robotics, Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: Berger Lahr, robotics robot cross table -Servo motors: SER397/4L3SS0TO 3 pieces -Linear units: LM-A504KT100-250 / LM-H404K-700-LW230 / LM-P404KT100-1200 -Individual components: see photos -Traverse paths: x=670 / Y=360 / z= 1260 mm -Total dimensions: 1405/590/H1650 mm -Weight: 74kg

Clamping plate with threaded hole and cross table, clamping angle, T-slot table, rotary table, milling machine table, upper support, top slide, dovetail guide, tool slide, cross table, cross support -Manufacturer: Santenberg, clamping table: milling machine table from CNC machining center GTC S 2 -Linear guide: THK YNA419 -Shaft: Ø 20 x 45 mm -Dimensions: see photos -Total dimensions: 715/530/H285 mm -Weight: 222kg

Mounting plate with threaded hole and cross table, clamping angle, T-slot table, rotary table, milling machine table, top slide, top slide, dovetail guide, tool slide, cross table, cross slide -Manufacturer: Santenberg, upper support tool slide from CNC machining center GTC S 2 -Drive shaft: Ø 20 x 45 mm -Dimensions: see photos -Dimensions: 720/550/H320 mm -Weight: approx. 194 kg

Scissor lift table trolley, scissor lift table, scissor lift table, scissor lift platform, scissor lift platform, single scissor lift table, Prül assembly table, assembly table -Manufacturer: Seco, Mobile scissor lift table type SHT35 -Load capacity: 350 kg -Platform: approx. 900 x 600 mm -Dimension when retracted: Height 430 mm -Extended dimension: Height 1070 mm -Quantity: 1x lifting table available -Price: per piece -Dimensions: 950/600/H430 mm -Weight: 75.5 kg/pc.

Scissor lift table, scissor lift table, scissor lift platform, scissor lift platform, single scissor lift table -Manufacturer: Lödige, scissor lift table -Load capacity: 1000 kg -Platform: 3000 x 2000 mm -Dimension retracted: height 390 mm -Dimension extended: height 2000 mm -Hydraulic unit: Bauknecht 3 kW / 150 bar -Transport dimensions: 3000/2000/H390 mm -Own weight: 2100 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 360 x 660 mm -T grooves: 8x 12 mm -rotatable: by hand with 4x fastening screws -swivelling: via crank -Movable: via crank 200 mm -Number: 1 piece available

Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table -Manufacturer: Platten, scissor lift table type 6.0 T/F/A -Load capacity: 6000 kg -Platform: approx. 1740 x 1280 mm -Dimension when retracted: Height 975 mm -Extended dimension: Height 1390 mm -Hydraulic unit: Kunz/Elmot 1.5 kW / 180 bar -Transport dimensions: 1740/1280/H1985 mm -Empty weight: 1270 kg

Scissor lift table, scissor lift table, scissor lift, scissor lift, single scissor lift table, flat form lift table -Manufacturer: Edmolift, scissor lifting table flat-form lifting table type TUB 600 and agg -Load capacity: 600 kg -Platform: approx. 1450 x 900 mm - Dimensions retracted: height 85 mm -Dimension extended: height 800 mm -Lifting time: approx. 13 seconds. -Quantity: 1x lifting table available -Price per piece Transport dimensions: 1480/930/H260 mm -Weight: 212 kg with pallet

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: milling machine table -Table surface: 600 x 220 mm -Y-axis: 130 mm movable, hand crank with fine adjustment, see photos -T grooves: groove width 12 mm, groove spacing 45 mm -Total dimensions: 690/490/H300 mm -Weight: 72 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: milling machine table T-slot table -Table surface: 300 x 300 mm -Y-axis: 50 mm movable, rotary wheel with fine adjustment, see photos -T grooves: groove width 12 mm, groove spacing 80 mm -Total dimensions: 420/330/H90 mm -Weight: 48 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: milling machine table T-slot table -Table surface: 400 x 250 mm -Y-axis: 95 mm movable, hand crank with fine adjustment, see photos -T grooves: groove width 16 mm, groove spacing 63 mm -Total dimensions: 455/400/H140 mm -Weight: 40 kg

Cross table controlled, cross table NC, coordinate table, LM Guide Actuator, linear drive, coordinate table, precision table linear guide, CNC cross table -Cross table: with linear drives THK LM Guide Actuator KR -Travel: x= 310 mm / y= 500 mm / z= 125 mm -Spindle pitch: 10 mm -Individual components: see photos -Dimensions: 750/550/H445 mm -Weight: 35 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Manufacturer: Mikron, milling machine table T-slot table from CNC machining center UME 600 -Table surface: 530 x 900 mm -T grooves: groove width 14 mm, groove spacing 63 mm -Transport dimensions: 900/530/H390 mm -Weight: 248 kg

Standard base for welding table, table base, table base for welding tableWelding and assembly tables -Manufacturer: Demmeler, standard foot for welding table 2 pieces -Type: 3-D -Pendulum feet: finely adjustable -Mounting countersunk screw: M24 -Price/Delivery: complete -Total dimensions: Ø 90 / 635 mm -Weight: 8.1 kg/piece

Standard foot for welding table, table foot, table foot for welding table welding and assembly tables, support foot -Standard foot: Support foot for welding and assembly tables -Height: finely adjustable -Quantity: 20x table base available -Price per piece -Total dimensions: 670/100/100 mm -Weight: 7.6 kg/piece

Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table -Scissor lift table: with roller conveyor, on rail frame -Load capacity: 1000 kg -Platform: 2400 x 820 mm -Dimensions retracted: height 240 mm -Extended dimensions: height 1140 mm -Rollers: diameter 40 x 500 mm, roller spacing 100 mm -Rail spacing: 1554 mm -B. Pressure: 160 bar -Weight: 372 kg