sliding table saw used for sale

table length: 2900 mm table width: 1400 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,9 t dimensions: 2,9 x 1,4 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping range of chuck: 120 - 380 mm height: 95 mm daylight: 170 mm external diameter: Futter 400 mm external diameter: Spannhebel 600 mm weight: 26 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mm turning diameter over slide rest: 145 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK connected load frequency: 230 V bore capacity in steel: 16 mm throat: 169 mm quill stroke: 50 mm turning speed range - drilling: 50 - 2250 U/min spindle drive: 0,5 kW total power requirement: 0,75 kW weight of the machine ca.: 0,175 t dimensions of the machine ca.: 1,3 x 0,65 x 1,3 m 3-axis LCD digital display system longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping range of chuck: 200 - 500 mm height: 110 mm daylight: 240 mm external diameter: Futter 320 mm external diameter: Spannhebel 700 mm weight: 56 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1400 mm table width: 1400 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,5 t dimensions: 1,4 x 1,4 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 1000 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,45 t dimensions: 2,0 x 1,0 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 4000 mm table width: 2000 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 2,5 t dimensions: 4,0 x 2,0 x 0,9 m Welding table SIGMUND Professional 750 + Plasma-nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 31 Positionen : 22 mm condition: neu weight: 43 kg Set 1 33-piece, 22mm system, consisting of: Clamps: 4 x 220610.1 Clamps 2 x 220630.1 Bolt: 12 x 220511 Stop: 4 x 220410.N Stop: 4 x 220420.N Angle: 2 x 220110.N Angle: 2 x 220152.N Accessory set. 1 x 223999 Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 96 Positionen weight: 600 kg condition: neu : 28 mm Special set 96 pieces, 28mm system, consisting of: 1x tool trolley 30x quick release bolts with twist lock short, without O-rings 8x universal stop 150 L - nitrided 4x universal stop 225 L - nitrided 8x stop and clamping angle 175 L - cast 2x stop and clamping angle 500 G left - nitrided 1x stop and clamping bracket 750 G left - nitrided 1x stop and clamping bracket 750 G right - nitrided 1x stop and clamping bracket 500 G left - nitrided 1x stop and clamping bracket 500 G right - nitrided 4x stop and clamping angle 300 G left - nitrided 8x prism Ø60-135 ° burnished - with collar complete with screw collar and countersunk head 16x professional screw clamps - nitrided 6x Professional screw clamp 45 ° / 90 ° - nitrided 4x universal stop 300 - nitrided 1x accessory set consisting of: Eccentric, Allen key, brush, sharpening ston ...

number: 33 Positionen weight: 52 kg condition: neu : 28 mm Set 1: 33 pieces, 28mm system, consisting of: Clamps: 4 x 280610.N Clamps: 2 x 280630.N Prism: 2 x 280648.1.N Bolt: 12 x 160511 Stop: 4 x 280410.N Stop: 4 x 280420.N Angle: 2 x 160110.N Angle: 2 x 280152.N Accessory set. 1 x 283999 Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,64 t dimensions: 2,4 x 1,2 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional Surcharge for 25mm material thickness: 340, -EUR The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 37 Positionen : 28 mm condition: neu weight: 29 kg Basic set 1 37 pieces, 28mm system, consisting of: Clamps: 4 x 280604 Bolt: 8 x 280511 Stop: 6 x 280420.N Angle: 2 x 280110.G Threaded bolt 8 x 280543 Stop 8 x 160415 Accessory set. 1 x 163999 Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,19 t dimensions: 1,2 x 0,8 x 0,85 m Siegmund workstation including 2 drawers Premium Light, through hardened tool steel X8.7, plasma nitrided and BAR coated. Drilling Ø 28 mm, drilling surface 100x100 mm grid. Material thickness approx. 15 mm With the new workstation from Siegmund, you can create your ideal workplace in a modular system. The Siegmund Workstation can be individually adapted and expanded to meet your needs and wishes. Whether sawing, drilling or welding - the absolute all-rounder in every workshop! Consisting of: 1x 004002 (Siegmund Workstation) 1x 804004.X7 (perforated plate) 1x 284030 (clamp holder) 1x 004020 (shelf) 1x 284035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) Spacer ring 800653.N is required for clamping with  ...

number: 106 Positionen weight: 283 kg condition: neu : 28 mm Set 5: 125 pieces, 28mm system, consisting of: Ferrules: 14 x 280610.N Ferrules: 10 x 280630.N Prism: 6 x 280648.1.N Bolt: 36 x 160511 Magnetic bolt 8 x 280740 Stop: 12 x 280410.N Stop: 12 x 280420.N Stop: 4 x 280430.N Angle: 12 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Angle: 1 x 280164.N Angle: 1 x 280165.N Angle: 1 x 280166.N Angle: 1 x 280167.N Angle: 1 x 280144.N Angle: 1 x 280146.N Trolley: 1 x 280910 Accessory set. 1 x 283999 Price information plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping range of chuck: 80 - 280 mm height: 67,5 mm daylight: 100 mm external diameter: Futter 300 mm external diameter: Spannhebel 480 mm weight: 13 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 32 Positionen weight: 35 kg Basic set 2 / 32 pieces for table top thickness 15 and 25 mm 6 pieces screw clamps 12 pieces quick clamping bolts 2 pieces universal stop 100 mm 4 pieces universal stop 150 mm 2 pieces universal stop 225 mm 2 pieces stop and clamping angle 175 mm 1 piece hole brush 300 mm 1 piece burner holder 1 piece non-stick spray 500 ml, natural, biologically based 1 piece welding table cleaner 500 ml, natural, biologically based The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 850 mm Vertikal stroke: 40 mm weight of the machine ca.: 0,18 t dimensions: 1,2 x 0,8 x 0,85 m Special offer ! Siegmund Workstation incl. 2 drawers + tool set B Through hardened tool steel, bore Ø 16 mm Holes surface 50x50 mm grid, material thickness approx. 11.5 - 13 mm. Consisting of: 1x 004002 (Siegmund Workstation) 1x 164004.X07 (perforated plate) 1x 164030 (clamp holder) 1x 004020 (shelf) 1x 164035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) 4x 160620 (clamp) 8x 160511 (double quick release bolts without groove) 6x 160412 (stop) 2x 160108.N (angle) 1x 160852 (Allen key) 1x 164301 (vice) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 1200 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,32 t dimensions: 1,2 x 1,2 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2900 mm table width: 1200 mm table height: 900 mm table load: 3000 Kg weight of the machine ca.: 0,77 t dimensions: 2,9 x 1,2 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mm turning diameter over slide rest: 140 mm turning length: 550 mm turning speeds: 125 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK tailstock quill stroke: 65 mm connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 0,135 t dimensions of the machine ca.: 1,25 x 0,6 x 0,6 m Speed in 6 levels 125 - 2000rpm. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. (Independent) Fixed bezel. Revolving bezel. 4-fold steel holder. chip tray. back panel. spindle protection. Hardened bed rails. Longitudinal feed with left / right switching. Set of change gears. Associated Tools. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 1000 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,73 t dimensions: 2,0 x 1,0 x 0,9 m Welding table SIGMUND Professional 750 + Plasma-nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mm table width: 1000 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,74 t dimensions: 2,0 x 1,0 x 0,9 m Product description - High quality steel S355J2+N + plasma nitriding - Material thickness approx. 17 – 19 mm - Bore Ø 22 mm - Holes surface 100x100 mm grid - Rounded corners, edges and holes - Height of side panel 150 mm - Hole spacing in side cheeks 50 mm - Including scaling on the surface - Construction reinforced with ribs - Grid lines enable precise setups - Special equipment for welding tables is available on request. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 430 mm table width: 240 mm x-travel: 225 mm y-travel: 160 mm table height: 160 mm T-slots: 12 mm weight: 45 kg dimensions: 0,6 x 0,45 x 0,2 mm Cross table with turntable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mm table width: 1200 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 0,74 t dimensions: 2,4 x 1,2 x 0,9 m Welding table SIEGMUND Professional 750 + plasma nitrided is made of high quality steel S355J2+N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17 - 19.0 mm. The holes have a diameter of 22 mm. Hole arrangement in a 100 mm grid on the table top, Side panels 150mm with parallel hole arrangement in a 50mm grid. Incl. basic foot equipment. Table height 850mm Price plus packaging and transport. Other dimensions available. The accessories shown are not included in the scope of delivery. Optionally available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 330 mm table width: 220 mm x-travel: 210 mm y-travel: 125 mm table height: 150 mm T-slots: 12 mm weight: 33 kg dimensions: 0,41 x 0,35 x 0,22 mm Cross table with turntable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 106 Positionen weight: 283 kg condition: neu : 28 mm Set. 4: 110 pieces 28mm system, consisting of: Ferrules: 14 x 280610.N Ferrules: 10 x 280630.N Prism: 6 x 280648.1.N Bolt: 30 x 160511 Magnetic bolt 8 x 280740 Stop: 10 x 280410.N Stop: 10 x 280420.N Stop: 4 x 280430.N Angle: 8 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Angle: 1 x 280164.N Angle: 1 x 280165.N Angle: 1 x 280166.N Angle: 1 x 280167.N Trolley: 1 x 280910 Accessory set. 1 x 283999 Price information plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mm turning diameter over slide rest: 140 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK tailstock quill stroke: 65 mm connected load frequency: 230 V total power requirement: 1,1 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,3 x 0,6 x 0,65 m Benchtop lathe 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools. Base cabinet is optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping range of chuck: 10 - 200 mm height: 67,5 mm daylight: 65 mm external diameter: Futter 200 mm external diameter: Spannhebel 360 mm weight: 4 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 800 mm table height: 850 mm Vertikal stroke: 40 mm weight of the machine ca.: 0,26 t dimensions: 1,2 x 0,8 x 0,85 m Special offer ! Siegmund workstation incl. 2 drawers + tool set B high quality steel S355J2 + N, plasma nitrided and BAR-coated Boreholes Ø 22 mm, boreholes surface 100x100 mm grid Material thickness approx. 17 - 19 mm Consisting of: 1x 004002 (Siegmund Workstation) 1x 224004.P (perforated plate) 1x 224030 (clamp holder) 1x 004020 (shelf) 1x 224035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) 4x 220610.1 (clamp) 8x 220511 (double quick release bolts without groove) 6x 220410.N (stop) 2x 220110.N (angle) 1x 220852 (Allen key) 1x 004303 (vice) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mm turning diameter over slide rest: 130 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 20 mm tailstock quill taper MT: 2 tailstock quill stroke: 60 mm metric threading: 0,4 - 3,0 mm thread - inch: 10 - 44 TPI thread - module: 0,2 - 12,5 mm connected load frequency: 230 V total power requirement: 1,0 kW weight of the machine ca.: 0,12 t dimensions of the machine ca.: 1,09 x 0,59 x 0,45 m Equipped with - 20 mm spindle passage - adjustable guideways - Powerful 1.0 kW motor - continuously variable speed Scope of delivery: - 3-jaw chuck 100 mm, - 4-jaw faceplate chuck 125mm - standing and rotating bezel - Splash guard - Feed protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm table height: 850 mm Vertikal stroke: 50 mm weight of the machine ca.: 1,1 t dimensions: 3,0 x 1,5 x 0,9 m Welding table SIEGMUND Professional 750 + plasma nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17-19.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, Side walls 150mm with parallel hole arrangement in a 25 mm grid. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. Other dimensions available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 77 Positionen weight: 146 kg condition: neu : 28 mm Set 3: 77 pieces, 28mm system, consisting of: Ferrules: 10 x 280610.N Ferrules: 6 x 280630.N Prism: 4 x 280648.1.N Bolt: 24 x 160511 Magnetic bolts 4 x 280740 Stop: 8 x 280410.N Stop: 8 x 280420.N Angle: 6 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Angle: 1 x 280166.N Angle: 1 x 280167.N Accessory set. 1 x 283999 Price information plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mm table width: 1200 mm table height: 850 mm Vertikal stroke: 40 mm weight of the machine ca.: 0,261 t dimensions: 1,2 x 1,2 x 0,85 m Welding table SIEGMUND Professional 750 + plasma nitrided is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Bottero glass cutting machine is available. Cutting thickness range: 2mm-19mm, max. glass dimensions X/Y: 3650mm/2750mm, weight: approx. 1650kg. On-site inspection is possible.

Two almost identical rotary indexing tables are available, 1x TT315-04-270-RH-20-3 KA57 DRN100L4-M2A and 1x TT315-04-270-RH-20-1 KA57 DRN100L4-M5B, diameter output flange: 360mm, overall height (screw-on surface output flange) 243.5, center diameter: 90mm, max. recommended mounting plate size Ø: 2800mm, weight of output flange: 193kg, load on output flange axial force: 32kN, radial force: 17kNm, tilting moment: 5kNm. mounting plate size Ø: 2800mm, rotary table weight: 193kg, load output flange axial force: 32kN, radial force: 17kN, tilting moment: 5kNm, load center column axial force: 28kN, tilting moment: 4kNm, accuracies partial accuracy: ±22mm, axial runout at output flange: ±0.01mm, radial runout at output flange: ±0.01mm. With documentation, on-site inspection is possible.

A total of 37 table trolleys are available. On-site viewing is possible.

table length: 400 mm table width: 400 mm table load: 600 / 1000 kg Control: total power requirement: kW weight of the machine ca.: 120 kg dimensions of the machine ca.: m Used rotary table in very good condition, little used (less than 100 hours) Has been used with a Bosch CNC control. Table diameter 400 mm Bosch AC-Motor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rotary tablet press for tableting single-layer tablets. Easy punch tool change, quick to clean, low noise operation. Including dust collector, tablet deduster and vacuum feeder. - Specifications: press tool: D | number of punch stations: 15 | max. speed of the machine in neutral: 77 cycles/minute (corresponds to approx. 69,000 tablets/hour) | max. tablet diameter: 25 mm | max. filling depth: 20 mm | max. precompression force: 12 kN | max. main compression force: 100 kN | product contact parts are made of stainless steel SUS 316L, chassis is made of stainless steel 304 | power consumption: 5.5 kW | machine dimensions: 660?690?1620 mm | weight: 675kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short d ...

Key data: 250 mm

Kitagawa TT 250 HMM03 NC Rotary Tables Table diameter 250 mm Spindle bore Ø 70 mm Weight 260 kg If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Automatic collection system for cans, glasses, bottles. Collection of single containers on rotating table so that jams can be avoided. - Specifications: up to 80 containers/min | diameter of table: 1.200mm | 380V, 0.18kW | machine weight: 50kg | dimensions: L1300xW1200xH1000mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Paper vibrator with spreading rollers Baumann BSB 3/L, year of construction 1988, serial number 210277, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. Bobr Sbjh H Ivij Nwkedc You are welcome to visit the machine in our house by prior appointment.

Jörgensen tablet press type 075HK3, built in 1961, with accessories, poor condition

Used semi-automatic tablet/capsule counter, produkcji firmy Kwang Dah z Tajwanu, model KDC-101. New: 2012 Capsules or tablets are counted in the machine by a sensor measuring the filling of the bottles. The sensor ensures accurate counting and dosing of tablets, lozenges, pills or transparent capsules. The machine is equipped with a compensator and a sensor that provides automatic adjustment according to the collected powder in the sensor window. Power supply: AC 110V/230V, 50Hz, single-phase, 5A Machine weight: 70kg Machine dimensions: 88 x 76 x 70 cm（length x width x height）

Manufacturer: Lisec Technical Specifications ( Model: ATH -60/30 D) - Year of Manufacture: 1995 - Operating Voltage: 380 V, 3-phase, 50 Hz - Power Consumption: 5.9 kW - Machine Weight: 6,000 kg - Compressed Air Pressure: 6 bar - Maximum Load Capacity: 500 kg Machine Length: 6,600 mm Total Installation Length: - With 4 glass racks: 25,500 mm - With 3 glass racks: 19,300 mm - With 2 glass racks: 13,100 mm - With 1 glass rack: 6,900 mm Depth: 3,200 mm Height: 3,600 mm Load Capacity: 600 kg Transport Speed: 40 m/min Glass Size (Max): 3,250 × 6,000 mm Glass Size (Min): 1,600 × 2,800 mm Glass Thickness: 3–12 mm Electrical Connection: 220/380 V, 50 Hz Installed Power: 6 kW Compressed Air Connection: NW 9, 6 bar Technical Specifications ( Model: ESL-60/30RS) - Year of Manufacture: 1998 - Operating Voltage: 400 V, 3-phase, PE, 50 Hz - Power Connection: 13.5 kW - Machine Weigh ...

Cast iron bed Length: 2300 mm Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T

number: 70 Positionen weight: 90 kg condition: neu : 28 mm WMT Set 7: 70-piece, 28mm system, consisting of: 3x Pipe clamps D28 90° – Item No. 4028397 3x Pipe clamps D28 180° – Item No. 4028396 3x Pipe clamps D28 45° – Item No. 4028398 3x Pipe clamps D28 300x150 – Item No. 4028399 3x Pipe clamps D28 300x200 – Item No. 4028400 15x Ball lock pins D28x50 – Item No. 4027663 10x Locking pins D28x80 – Item No. 4028876 4x Universal Stop D28 100x50x25 mm – Item No. 4028469 4x Universal Stop D28 150x50x25 mm – Item No. 4028470 4x Universal Stop D28 225x50x25 mm – Item No. 4027657 2x Universal Stop D28 300x50x25 mm – Item No. 4027659 2x Stop Clamping Angle D28 75x50x75x25 mm – Item No. 4028657 2x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 4028658 2x Stop Clamping Angle D28 175x50x175x25 mm – Item No. 4028649 2x Stop Clamping Angle D28 175x50x75x25 mm – Item  ...

Stock number: DT077, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tablet deduster, Dimensions: L 400 x W 350 x 300 mm., Manufacturer: King, Model/type: BR 6

Stock number: DT072, Tablet compressing machine,, Fette model Perfecta 1000., Circular with 22 stations,, Ø 19 mm tooling., Max 72.600 tablets/hour., Including control cabinet,, including Ø 11 mm. set of formats.

Stock number: D1214, Circular table, King,, with laminate table top., Ø 1000 mm., Dimensions: Ø 1000 mm.

Stock number: F423, Tablet counter,, King type TB 2 painted model., Max tablet size: Ø 11,5 mm,, 220 V., Table model.