sliding table saw used for sale

A suction cabinet from BDK is sold. The cabinet can be tested under power. The cupboard is in very good condition. The windshield was damaged during transport at the front. Techn Data: Hosch Filter Supply Air: MXLA- GW 112050090mm Hosch Filter Exhaust Air: MXA-GW 457mm457mm90mm Power consumption 0.63KW El. Connection: 230V AC, 50 Hz Hedging 16A on site Lighting 30 watts User manual available

Tablebelt grinding machine Höfer Format: 2.50 x 1.20 m Engine: 4 kW L x W x H: 3.2 x 1.6 x 1.7m Weight approx. 680 kg The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Korsch EK III single station eccentric tablet press, maximum tablet diameter 60mm, maximum depth of fill 70mm (currently set for maximum 30mm depth of fill). Maximum pressure 200kN. Four speed (11, 22, 32, 42 strokes/minute) capacity up to 2520 tablets per hour, using a single-tip tool.

Pressure plate intermediate table Grafoteam MDT 260 C; condition overhauled; 2 pieces available; Arm length 780mm; Max. Plate size 780x820mm. Plate conveyor Grafoteam MDT 260 C; condition rebuilt; 2 pic. on stock; arm lenght 780mm; max.plate size 780x820mm.

specifications: - Load capacity Positioning table approx. 750 kg - Sheet plate diameter 500 mm - max workpiece diameter 1600 mm - Height turntable at horizontal position approx. 750 mm - Turntable with right, + left-hand run - Rotary axis turntable endless 360° - Turning time per revolution 12.5 sec. - Pan left + right - Pivot axis rotation angle 180° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot button for turntable + swivel arm - hydr. Clamping bolts for clamping the workpiece in the centre of the turntable - Clamping stroke / clamping distance of the clamping bolt 32 mm - Clamping force pressing / pulling 80 / 48.9 kN - Clamping cylinder internal thread M 27 x 40 - Positioning control SIEMENS - Operation manually or via control - Space requirement approx. W 1500 x D 2800 x H 1100 mm - Weight approx. 2500 kg - sepa ...

Angular table for lid milling machine Clamping flat 900x530mm 8 St T-hooks Never used

specifications: - Clamping area approx. 400 x 300 mm - Travel across x approx. 500mm - Travel along Y approx. 300mm - 2 Handwheels - Height 220 mm - 4 T - grooves 14 mm - Distance of the T - grooves approx. 72mm - Space required approx. W 1100 x D 900 x H 220 mm - Weight approx. 190 kg

Fixing plate, magnetic table pair for sale. It can be attached with screws to an injection molding machine, machine tool or elsewhere. This allows an injection mold or other iron with a maximum size of 245x230 mm to be attached.

Code 0776 Description Surface grinding machine Make ELB Type SWBD 030 MCNC82 Machine No. 18.346.0383 Manufacturing date 1983 Control MCNC / 82-PC Tablesize 3520 x 600 mm Table grinding size L x B x H 3000 x 600 x 600 mm Magnetical plate size L x B 3000 x 400 mm Speed table movement 0,2 – 6 m/min. Max. distance table – centre grinding wheel 850 mm Speeds vertical 3 – 375 mm/min. Speeds cross 1,2 m/min. Speeds grindingwheel stepless 750 – 1400 omw/min Grindingstone: Ø 600 x Wide:100 x Bore: 200 mm Weight 18.000 kg Motor power 37 kW – 380 Volt Accessoiries Electro table 3000 x 400 mm Grinding unit with water cooling Filtering unit with paperfilter Profile grinding unit Condition Machine is in very good condition

GER RS-12/50 surface grinding machine. Grinding area: 1200x550mm. Distance table-centre of spindle: 625mm. Table speed: 2 to 25m/min. Maximum table travel: 1250mm. Maximum work weight: 1200Kgs. Maximum cross travel: 500mm. Grinding wheel size: 400x80x127mm. Manual diamond grinder. Vertical orientable headstock. Vertical automatic feed. Power of grinding spindle: 12,5cv. Weight: 4500Kgs.

Tablet compressing machine,Daif type TMA special,1 head,manuel.

Tablet compressing machine,Manesty type BB3B,27 stations,variable speed.

Tablet compressing machine,Manesty type BB3A,circular with 39 stations,max.130.000 tabl./h

Tablet dust remover,stainless steel,type EB.

Tablet compressing machine,Daif type TM special,1 head

Tablet compressing machine,Comprex II,1 head

Tablet dust remover,Korsch type Quadromat,with brushes

Tablet dust remover,Korsch type Quadromat,with brushes

Tablet compressing machine,Kilian type RU-ZS,20 plungers

Tablet compressing machine,Kilian RUI,circular,20 plungers

Tablet compressing machine,Comrex II,1 head

Tablet compressing machine,stainless steel,type NIS,20 plunger,circular

Tablet counter,King type TB2,painted edition,max tablet size Ø 11,5 mm.,220 V.

Tablet counter,King type TB 2,painted cabinet

Table,stainless steel,on legs,L 1100 x W 760 x H 820 mm.

Table,stainless steel,standing on leg frame,L 2200 x W 1000 x H 800 mm.

Table,stainless steel,adjustable height,L 1790 x W 700 x H 880 mm.

Table,stainless steel,adjustable height,L 1790 x W 700 x H 880 mm.

Tabletop with sink,stainless steel,L 2800 x W 650 mm.

Table,stainless steel,1 shelf,L 1920 x W 620 x H 860 mm.

Table,stainless steel,electric raise/lower function,wall mounted,L 4000 x W 700 mm.

Table,stainless steel,with 2 x sink,L 2600 x W 600 x H 900 mm.

Table,stainless steel,with fiberboard,L 1000 x W 760 x H 1170 mm.

Table,stainless steel,1 shelf,L 1300 x W 600 x H 910 mm.

Table,stainless steel,with sink,L 3000 x W 650 x H 890 mm.

Table,stainless steel,with shelf,L 1550 x W 600 x H 900 mm.

Table,stainless steel,standing on legs,L 1340 x W 750 x H 570 mm.

Table,stainless steel,standing on legs with wheels,L 1100 x W 800 x H 800 mm.

Table,stainless steel,with 2 sinks,L 3800 x W 630 x H 930 mm.

Table,stainless steel,for wall mounting,with sink,L 2150 x W 700 mm.

Table,stainless steel,for mounting on wall,with sink,L 2000 x W 700 mm.

Table,stainless steel,for mounting on wall,with sink,L 1900 x W 700 mm.

Table,Stainless steel on wheels with grid-top,L 1000 x W 750 x H 740 mm.

Table,stainless steel,standing on legs with wheels,L 850 x W 550 x H 750 mm.

Lifting table,Hymo,hydraulic lift,table lift 830 mm.

Lifting table,Hymo,hydraulic lift,table lift 830 mm.

Separating table,stainless steel. standing on 4 legs,roller conveyor in the bottom,L 990 x W 570 mm

Circular table,Soco,galvanized,with plastic plate,Ø 1200 mm.

Circular table,stainless steel,standing on legs,Ø 1000 mm.

Feeding table,with mechanical arm for feeding,L 1800 x W 900 x H 900 mm.