sl used for sale

Sliding wear fan location Diameter: 100cm; ready for use

Window slot machine REX with trimming saw and slot milling L x W x H: 200 x 150 x 160 cm Weight approx. 750 kg Built in 1976 The machine is in good condition, ready to use. This machine is available from October 2018. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Made in Italy machine according to DIN 8606 Tip height: 260 mm Turning diameter over bed: 520 mm Swing over carriage: 300 mm Centre distance: 1500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (24) 9-1600 rpm (option 11-2000 U/min) Engine output: 5.5 kW (option: 7.5 kW) feed Z-axis: (93) 0.028 6.43 mm / Rev Feed x axis: (93) 0.012 2.73 mm / Rev Thread, metric: (54) 0.5-224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, module: (54) 0.5-112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P.. Cross slide Lxw: 650 x 230 mm Transversal carriage stroke: 340 mm Upper carriage Lxw: 350 x 150 mm Upper carriage stroke: 150 mm Tailstock Quill diameter: 85 mm Tailstock Quill stroke: 200 mm Tailstock taper: MK 5 Weight: 3,100 kg Facilities: -Movement of the tailstock pneumatically supported -Acceptance Protocol according to DIN 8605, ...

Made in Italy machine according to DIN 8605: lathe with increased accuracy. Tip height: 215 mm Turning diameter over bed: 430 mm Swing over carriage: 240 mm Top width: 1,000 mm Bed width: 290 mm Spindle bore: 52 mm Spindle nose: Camlock 6 " Spindle speeds variable: 6 Spindle speeds: 60-2,000 rpm S6/S1 engine power: 4 kW (option: 5.5 kW) feed Z-axis: (38) 0.05 - 1.88 mm / Rev Feed x axis: (38) 0.02 1,084 mm / Rev Thread cutting, metric: (30) 0.45-20 mm Thread cutting, Witworth: (35) 80-1 3/4 TPI Thread cutting, module: (25) 0.25-10 mm Thread cutting, Diametral Pitch: (30) 160-3 1/2 D.P.. Cross slide Lxw: 370 x 190 mm Transversal carriage stroke: 240 mm Upper carriage Lxw: 275 x 115 mm Upper carriage stroke: 120 mm Tailstock Quill diameter: 60 mm Tailstock Quill stroke: 135 mm Tailstock taper: MK 4 Weight: approx. 2,000 kg Facilities: -Infinitely variable  ...

Working condition Complete electrics Yom: 1990 Technical details: Swing over bed: 2500 mm Turning length: 12 500 mm (The whole length of bed 15 700 mm) we can also make the extension of the needed workpiece weight: 120 tons bed width: 2 900 mm machine weight: 120 tons

1. driveway gate, new, (total length: 7,200 mm), single / self-supporting, clear opening width: 5000 mm x height: 1,500 mm, material: frame rectangular tubes and bars in square tube in statically sufficient dimensioning, 1 post with base plate and 4 Holes, height: 1,500 mm, incl. mounting material and Foundation plan, closing direction / driveway right or left (seen from outside), surface: hot-dip galvanized, item location: ex works, self assembly. Price: On request! Freight cost: On request! Other dimensions, coatings and mounting types on request. Delivery time: approx. 6-10 weeks) depending on the season)!

Sludge feed pump rotary piston pump PL100 Börger Product no.: RE-HU-2019-0701-PK32 System: rotary piston pump sludge feed pump Manufacturer: Börger Type: Pl 100 Speed: 50-700 rpm Flow rate: 2.5 to 38 m3/h Pressure: 12 bar

Slab formwork, wall formwork, wooden beams, props, formwork accessories used immediately operational. We are happy to answer questions phone 06190-93449-0 The material can be visited by appointment, we buy also. Note also our other ads! We can offer you several thousand square metres of used formwork, scaffolding and tools - ask us!

Ultra slicer his Sodeva -Slicer type CEL 250 -Year 2011

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 7.00 mm Max. turning length: with flat cames: 60 mm Spindle hole: 8.00 mm Max. treading diameter: 6 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1400 rpm up to: 10000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 2.0 HP Machine´s weight about: 730 kg Overall dimensions machine: Length: 1200 mm Width: 900 mm Height: 1400 mm Various accessories: Drilling attachment 12 U Pick-up attachment: 34 DA Electric control-box Controlled clutching device

Made in Italy Peak: 300 mm Rotary diameter over bed: 600 mm Rotary diameter via sled: 380 mm Peak: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (12) 16-1200 U/min Engine power: 9.2 kW (special equipment/standard: 7.5 kW) Reprimor Z-axis: (93) 0.028-6.43 mm/U Feed X-axis: (93) 0.012-2.73 mm/U Thread, metric: (54) 0.5-224 mm Threads, Witworth: (55) 72-1/4 x8 TPI Thread, module: (54) 0.5-112 mm Threads, Diametral Pitch: (54) 64 -1/4 D.P. Crossleigh hub: 340 mm Oberslitten hub: 150 mm Riding stock pinol diameter: 85 mm Riding stove pinol stroke: 200 mm Ridstock cone: MK 5 Weight: About 3,200 kg Facilities: -3-axis digital display -Step-by-step speed adjustment -Automatic lubrication of the management railways -LED lighting -Micrometer bed strike -9.2 kW engine instead of 7.5 kW -Quick change holder system mul ...

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 20.00 mm Max. turning length: with flat cames: 80 mm with bell cames: 150 mm Spindle hole: 21.00 mm Max. treading diameter: 12 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 28 from: 485 rpm up to: 5450 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 1450 kg Overall dimensions machine: Length: 2200 mm Width: 1100 mm Height: 1700 mm Various accessories: Combined 3-spindle attachment: 12 CA Controlled clutching device

SH75 max. wheel diameter 750 mm gear width 200 mm max. module 10 min. module 1 min. wheel diameter 30 mm max. number of teeth 300 min. number of teeth 6 tooth helical angle min/max 0 / 60 ° min. ram stroke 0 mm max. ram stroke 225 mm table diameter 500 mm table load 0,8 t no. of strokes 23,5 - 150 Hub/min table hole 90 mm total power requirement 7 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2,1 x 1,7 x 2,1 m

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13-Y Electric control-box

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 7.00 mm Max. turning length: with flat cames: 60 mm Spindle hole: 8.00 mm Max. treading diameter: 6 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1400 rpm up to: 10000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 2.0 HP Machine´s weight about: 730 kg Overall dimensions machine: Length: 1200 mm Width: 900 mm Height: 1400 mm Various accessories: Electric control-box 3 spindle front attachment Controlled clutching device Centering device lateral: 17 MA Rocker arm with 1/1000 mm

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 7.00 mm Max. turning length: with flat cames: 60 mm Spindle hole: 8.00 mm Max. treading diameter: 6 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1400 rpm up to: 10000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 3.0 HP Machine´s weight about: 750 kg Overall dimensions machine: Length: 1200 mm Width: 900 mm Height: 1400 mm Various accessories: Electric control-box 2-Spindle back-drilling att.: 32 AA on pick-up: 12 UB+perçeur transv. 12 UB

Required scope of delivery for the Slip-through protection: 01x U-profile, used Material color: Agraffe: Orange U-Profile: White Total length: approx. 2,760 mm Profile dimensions: 60 x 45 mm including 2 swivelling agraffes Number of hooks: 4 HK (hooks per agraffe) 02x safety pins, used Material color: sendzimir galvanized For more information: Shelving system: Vogelsang Type: NS suitable for clear width: approx. 2,700 mm Superstitut: approx. 70 mm Two original agraffes are attached to the U-profile. With the help of this, the Durschschubsicherung suspended in the stand and with safety fixed. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from  ...

Qty. 1 Second-hand slitting line Mfc.: Kampf Built: 2001 Re-Installed in 2016 under power – no production! Material Processed: Al. Alloys 1145, 1100, 3003, 7072 and 8111 Temper: 0 Thru H19 Strip Width: 635 - 1753 mm (25" - 69") Thickness: 0.05 - 0.381 mm (0.002" - 0.015") Slitting Width: 15.8 mm - 1169 mm (0.6" - 46") Max. 40 Cuts Plus Edge Trim According to Kampf, this Line will run Can Lid Stock: 0.93 mm (0.037") and "O Temper" Dead Soft Aluminum at 2.06 mm (0.081") with Knife Modifications. Line Speed Max: 800 m/min. (2600 Ft/min.) depending on material type, thickness, etc.

Required scope of delivery for the Slip-through protection: 01x U-profile, used Material color: cream white Total length: approx. 1,860 mm Profile dimensions: 60 x 45 mm including 2 swivelling agraffes Number of hooks: 4 HK (hooks per agraffe) 02x safety pins, used Material color: sendzimir galvanized For more information: Shelving system: Vogelsang Type: NS suitable for clear width: approx. 1,800 mm Superstitut: approx. 70 mm Two original agraffes are attached to the U-profile. With the help of this, the Durschschubsicherung suspended in the stand and with safety fixed. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. Our services at  ...

Column-Mounted Crane DEMAG Capacity 500 kg Arm travel 3400 mm Manual arm rotation Column height 3000 mm Column base diameter 700 mm - with base discs (see photo) Electric hoist I beam dimensions: 220 x 100 mm (see photo) Total weight approx 2 T MACHINE IN OUR STOCK IN FRANCE.

Required scope of delivery for the Slip-through protection: 01x U-profile, used Material color: orange Total length: approx. 2,760 mm Profile dimensions: 80 x 45 mm including 2 swivelling agraffes Number of hooks: 4 HK (hooks per agraffe) 02x safety pins, used Material color: sendzimir galvanized For more information: Shelving system: Vogelsang Type: NS suitable for clear width: approx. 2,700 mm Superstitut: approx. 70 mm Two original agraffes are attached to the U-profile. With the help of this, the Durschschubsicherung suspended in the stand and with safety fixed. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us. Our services at a gla ...

Column-Mounted Crane VERLINDE type XC2 Capacity 500 kg Column Ø 250 mm Column height 4400 mm Height under arm 3700 mm Trolley useful length 2700 mm Delivery with one fixing plate Ø 810 mm (see photo) Weight Total weight approx 2 T MACHINE IN OUR STOCK IN FRANCE.

Tip width: 700 mm Tip height: 150 mm Circulation diameter over bed: 300 mm Bed width: 180 mm Spindle bore: 38 mm Mounting in the spindle bore: MK 5 Speed range, infinitely variable: 30 - 450 / 150 - 3000 rpm Range of longitudinal feeds: (14) 0.07 - 0.65 mm/U Area of plan feeds: (11) 0.03 - 0.12 mm/U Metric threads: (18) 0.2 - 3.5 mm Inch Thread: (21) 8 - 56 Gg/1" Pinole path: 85 mm Pinole holder: MK 3 Engine power S1 100%: 1.5 kW / 400 V Motor recording power S6 40%: 2.2 kW / 400 V Machine dimensions (W x D x H): 1380 x 640 x 500 mm Weight approx.: 235 kg without base Delivery: - Digital display - 3-jaw chuck PO3-160 mm steel version - Feed flange 160 mm - Solid grain tips - Interchangeable wheels - Quick-release steel holder size 20-2 with 2 straight inserts - Slip clutch - Micrometer longitudinal stop - Plan sled with top support - Frequency inverter ...

1 x L+Z lathe Colchester Mascot 1600/600 Built: c.1975 Very stable lathe. Ideal machine for locksmiths or agricultural machine mechanics. Technical data: Turning diameter over crimson: 710 mm Turning diameter over bed:432 mm Turning diameter via support:267 mm Turning length: 1,000 mm Spindle speeds:20 - 1600 rpm Spindle bore:76 mm Drive motor:5.6 kW Feeds: 0.6 - 10 mm/u Metric threads: 40 (0.4 - 14 mm incline) Machine weight approx.:2000 kg Room requirements approx.:l:2.65 x w:1.1 x h:1.6 m Accessories: 3 - Jaw lining UVA 310 mm 4 Set of change jaws Bfraed8ae0 Tripan quick-change system 4 x Interchangeable holder running counter tip in tailstock (MK 5) Countertip in spindle Alternating wheels Manual Mudguard complete documentation The machine can be inspected at our warehouse in Reichenbach under electricity.

Used cake cutting machine KRUMBEIN, type: KSSM V0,1-D -In bakery condition- - incl. 3 knife holders - Knife can be easily adjusted to cutting width - Quick removal of the individual knives - For sheets 60 x 40 cm - 8 knives should be exchanged to achieve a perfect cut - El. Connection: 400 V, 3 N+Pe, 50 Hz, 1.8 A Sightseeing and test run are possible at any time.

YOM 1987. Worked not more than 10 years, one shift Grinding length 3000 mm Grinding width 1700 mm Workpiece height 1600 mm Distance between columns 1860 mm Grinding heads- 2 Table surface 3230x1600 mm Number of slots of the table 10 pcs Permissible table load with evenly distributed load 5000kg/m Weight of work-piece 15t Table travel speed 1-40m/min

Flat slider for drilling rig for mounting in the drilling spindle Tool holder SK50

Forklift attachments Snow sliders with rubber scrapers Quick pick-up with the fork tines Clearing shield 2-fold to the left and right adjustable Spring folding hatches and scraper screwed on Securing against unintentional slipping Shield width: approx. 2000 mm Shield height: approx. 400 mm Fork cross section: approx. 120 x 50 mm Fork distance: approx. 540 mm All information without guarantee

Size: 0300, outlet opening (300x300) mm, Operating overpressure 0.8 bar, Operating temperature: 120°C

Fully automatic slicer and portioner TREIF Divider ECO 200, built in 2004, in a very good used and functional condition. Completely made of stainless steel, large product holder W/H 28/20 cm, insert length 55 cm. Disc thickness from 0.5 to 30 mm infinitely adjustable, up to 200 cuts / min. spout strip, programmable PC control. Dimensions B/T/H 210/88/185 cm. Connection values 400 volts, 2.0 kW, 2.9 A. Workshop tested, ready for immediate use. More details on request.

Various shots in good condition with colstress and drill/cutter holders

1 Slicer with checkweigher and removal belt Model: Mega-Slicer Type: SL 490 Manufacturer: Dixie Union, Germany Machine number: 490.1229 Power: up to 600 cuts/min., adjustable 60 different programs choiceable Application: Cheese and sausage cutting Disc thickness: 0.5... 20 mm, adjustable Piece thickness: 5... 50 mm, adjustable Electrical connection: 380 V, 9,0 KW Dimensions: 2,4 x 1,3 x 2,4 m 1 Checkweigher Manufacturer: Boekels, Germany Type: EWK 436 1 Removal belt Technical condition: used in excellent operating condition

1 High performance - cutting machine with checkweigher and removal belt Model: Mega-Slicer Type: SL 490 Manufacturer: Dixie Union, Germany Machine number: 490.1229 Power: up to 600 cuts/min., adjustable 60 different programs choiceable Application: Cheese and sausage cutting Disc thickness: 0.5... 20 mm, adjustable Piece thickness: 5... 50 mm, adjustable Electrical connection: 380 V, 9,0 KW 1 Checkweigher Manufacturer: Boekels, Germany Type: EWK 436 1 Removal belt Technical condition: used in excellent operating condition

Veneer Vertical Slicer Manufactured by Angelo Cremona

Veneer Slicer, model TN 4000, manufactured by Angelo Cremona

Working Length: 4000 mm

- Stainless steel - pneumatically operated - 540 x 590 mm flange dimension inside

Paper size : 210 x 210 mm – 370 x 650 mm Paper weight : 110-350 gms Speed : 1560 sheets/hour Machine complete, in good working conditions.

Slitting plant Spliting line

Business card 55 mm module Paper size : 210 x 210 mm – 370 x 650 mm Paper weight : 110-350 gms Speed : 1560 sheets/hour Power supply : 230V – 50/60Hz

P213 - used approx. 30 m3 / 30,000 L polyester tank, GRP tank, Speidel tank, standing, flat bottom. Technical details: Content: approx. 30 m3 / 30,000 litres Material: Polyester tank / GRP tank Manufacturer: Speidel Tank- und Behälterbau GmbH Dimensions: approx. 3.00 m x approx. 4.60 m high Other: Used polyester tank in very good condition, manufacturer Speidel. Vertical flat bottom tank, dome at the top of the roof, several connections, incl. filling line. The container can be used as a storage tank for many different media such as water, liquid food, whey, potato vapour bowls, molasses, manure, seepage juice, rapeseed oil or as a rain collection tank, etc. Price on request. Transportation can be arranged cheaply. We can also rework the tank as desired, please ask us. It is not possible to update all our listings daily. As our stock is constantly changin ...

Curve planer

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 6 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13Y Milling attachment on pos. number: 4 Controlled spindle stop device O Electric control-box Speed accelerator

Product number: 1794 Type: Multipack RC11-80 U Serial number: 04AF353 Year of construction: 2004 Capacity: max 80 packs/min .Glue unit: Nordson Problue 4 hot melt Power: 3 x 400V, 50Hz Dimensions: 7500 mm x 1550 mm x 2900 mm

Sleever for PET bottles or tamper evident sleeves, made in 1997

Sleever for PET bottles or tamper evident sleeves, made in 1997, with tunnel

Grote modular slicer SNP412 Serial: 1117803 Stainless frame, up to 120 strokes per min, product size 101.6mm x 300mm, slice thickness up to 9.52mm, mobile, 1Ph

Scharfen meat slicer Model: V330 stainless, ideal for slicing ham, cheese and other fresh meats, 1Ph, 330mm diameter blade, (four in stock from 2016 - 2018)

Eillert Belt slicer Model: G4400 VS Stainless frame, ideal for cutting fruit and vegetables, variable speed for cutting thickness, belt width 250mm, three winged knife and a series of blades for cutting leafy vegetables, overall length 2700mm, 550Kgs

Cone slot milling machine Duko L x W x H: 1300 x 1000 x 1500 mm Weight approx. 800 kg Built in 1963 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12