sl used for sale

Max. load: 125kg, arm length: 3000mm, height: 2400mm, with Chain Hoist Mannesmann Demag PK 1N.

There are a 500kg-column-mounted slewing crane and a 250kg crane traverse Carl Stahl available.

Max. load: 1t, max. arm length: 3000mm, column diameter: 410mm, height: 3760mm, lifting speed: 16m/min, need a 1x1x1m³ foundation, an on-site inspection is possible.

Aventics R480163988, stroke 200 mm, piston diameter Ø32 mm, slotted cylinder Item Condition: New Damping pneumatic Compressed air connection G 1/8Hub 200 mm Piston diameter 32 mm Ambient temperature max. 60 °C Ambient temperature min. -10 °C Principle of action double acting Operating pressure max. 8 bar Operating pressure min. 3 bar

Slicer Manconi 250 V K-VD, Cutting blade 25cm diameter, with grinder, Connection 230V, year of construction 2004, Dimensions LxWxH approx. 58x60x44cm, weight approx. 35kg, good used condition, works perfectly

Column crane, slewing crane, column slewing crane used Manufacturer: VETTER (presumably) Type: WIZARD AS10-5.0 (presumably) Year of construction 5/2006 Payload 1000 kg Swivel range 270° Projection from column: approx. 5.4 m, boom profile height approx. 37 cm Bottom edge boom to floor: approx. 3.8 m Total height: approx. 4.3 m Base plate diameter approx. 1.2 m The previous owner has mounted a smaller base plate. In order to really use the 1000 kg, a 1450 mm base plate must be mounted (as can also be seen on the type plate)

Slip ring motor Brand : ASEA No. : 281031 AB 6475 Built size : 355 m4 Power : 200 KW Rotation : 1480 Volt : 380 Y / 50 Hz / 358 A Class : IP 44 Condition : Good condition

Type: FELIX - CE Dimensions of the machine: W: 90cm L: 60cm H: 100cm Cutting length: 0,5 - 32 mm Electric power: 1 KW Delivery time: 10 working days after advanced payment

Qty. 1 Second-hand slitting line – still in operation Mfc.: BONAK Model: 1550-4-20 Built: 1990 Min-Max.Strip Width: 500 - 1.550 mm Min-Max Thickness: 0.5 - 4 mm Entry coils: 20 Tn ID: 450-650-800 mm OD: 2.000 mm Exit coils: 20 Tn ID: 508 mm OD: 2.000 mm Line speed: 0-100 mm/min Large number of knives, separators, etc.. Pass line: Right to Left Floor space required: 19 x 10.5 m

Manual slicer with integrated packaging module KUCHLER S.A.M. 300 psh + foil machine + packer Specifications: Type slicer: SAM 300 Psh T Type film dispenser: SAM IL - 4 - 220 Airless Type Packer: SAM T 26 230 volts / 50 Hz / 3.24 A Year of construction: 2009 Film size: 21 x 26 & 21 x 22 cm several layers on top of each other can be welded Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 300 mm Stainless steel knife, Teflon coated including original knife grinder including original knife lifter Luminous flux Function tested, machine immediately ready for use! Condition, see original pictures! If you have any questions, email or call.

Manufacturer: MKG Maschinen- und Kranbau GmbH Type: HMK340TA2 Factory No. 980-555 Year of construction: 1992 Vehicle is fully functional. Hydraulic system currently shows no leakage. Battery is in good condition. Crane vehicle can be supplied externally with high voltage current for continuous operation. Mechanically and technically in order. The wheels and castors would have to be renewed. Vehicle is now available...

REF-666 BERTUZZI SLICER-DICER Use: fruits and vegetables. Manufacturer: BERTUZZI Model: CLF0817 Year: 1997 Output: 500-6,000 kg/h depending on the type of product and cut size 415V, 50 Hz, 2 HP, three-phase Current cut size: 1-10mm slices Year of manufacture: 1997 Dimensions: L-850mm, W-850mm, H-1.430mm.

dowel hole drill device: yes; max depth of the slot: 165 mm; max length of the slot: 200 mm; head vertical stroke: 200 mm; motor power: 2,2 kW; speed: 2800 U/min; suction connecion: 120 mm; machine length: 1000 mm; machine width: 900 mm; machine height: 1250 mm; weight: ca. 200 kg;

1x Lathe Manufacturer: TOS Type : SUI 80/4000 Year of construction: 2020 Commissioning: 09.2020 Turning length: 4000mm Turning diameter over bed: 800mm Turning diameter via slide: 520mm Speed max: 14-1400rpm Through hole: 92mm Spindle bearing diameter: 140 mm Accessories: - retrofitted frequency converter, - Position indicator 3-AX Heidenhain ND7013, - Quick release head system Multifix D + holder D1D 40180 Machine condition: almost New Delivery time: March 2023

-) 2-jaw drill chuck 20 mm -) Dowel drilling device with 4-compartment grid 16-32-22-25 mm -) 90° frame stop pluggable -) Miter stop 45° and 22.5° pluggable -) Moving equipment -) Workpiece clamp manual 2 pieces -) Suction connection D 100 mm Optional accessory: -) Gauge in handwheel -) infinitely variable double angle miter stop -) 1 lever operation -) switchable pneumatic stroke for two planes -) Leaser on request

Beautiful hamlet intern 160. Centre distance 650 mm Center height 160 mm Turning diameter over bed 320 mm Spindle bore 40 mm Spindle speeds 24-2500 rpm Accessories: Digital display Heidenhain 3 axes 3-claw 160mm Multifix tool holder with 5 holders Collet Equipment Collets 27 pieces

material-width : max 1.200 mm cores of mother roll 76+152 mm weight of un+rewind-roll 1.000 kg unwinder diameter max. 1.000 mm rewind diameter max 1.000 mm rewind-roll min. width: 150 mm one arm max. 219 mm / two arms up from 220 mm rewind shaft dia. 50 / 70 / 76 mm tension-unwinding : 100 kg tension-rewinding : 20 kg/each arm machine speed : 350 m/min

Type M, Factory No. 15864 Load capacity 3200 kg Projection 4000 mm UK beam 4820 mm YOC 1998 engine. Pan 360 degrees Chain hoist Liftket YOC 2014 type 3200/ 2-5/1,25 Factory No. E 33594 With motor. Chassis EF 320 , 24 V Prufbuch, acceptance examination etc. Crane was dismantled on 30.11.2022

Turning diameter over bed 490 mm Center width 1500 mm Spindle bore 63 mm Spindle speed 2240 min-1 Chuck diameter 250 mm 2 x Bezel Tailstock Multifix

Figure shows MIOTAL® TC 180 x 1000 Center width: 750 mm Center height: 165 mm Orbit diameter over bed: Ø 330 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0 Diametrical thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 650 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circula ...

Center height: 205 mm Orbit diameter over bed: 410 mm Center width: 1000 mm Bed width: 260 mm Spindle nose: DIN 55029 (Camlock) 9, size 6 Travel cross slide: 220 mm Travel upper slide: 125 mm Spindle bore: 52.5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Infinitely variable Mechanical counters: 2 Motor power: 3.75 kW Coolant pump: 0.13 kW Longitudinal feeds Z: 0.05 - 1.7 mm/rev Face feeds X: 0.025 - 0.85 mm/rev Whitworth Thread: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametric thread: (21) 8 - 44 DP Module thread: (18) 0.3 - 3.5 MP Quill diameter: 52 mm Inner cone quilt: MK 4 Quill stroke: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Characteristics: - Tool mesh accuracy according to DIN 8605 - Infinitely variable speed control (2 countershafts) - Finely balanced main spindle - Stable machine bed with hardened and gro ...

Center width: 1000 mm Center height: 178 mm Orbit diameter over bed: Ø 356 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0  Diametrical thread: (32) 7.5 - 112  Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circulating oil lubrication, precision-be ...

Clamping plate with T-slots made of cast steel cast iron Length 1900 mm Width 1600 mm Thickness 475 mm Plate thickness approx. 130 mm Base area 1800 x 1890 mm- Clamping surface with scrubbed T-slot plate made of steel, thickness 70 mm- T-slots 22 mm, distance = 300 mm - Parallel to the bottom milled top = clamping surface - Milled bottom also the webs lie flat and carry - Very high load possible due to the strong ribbing and the load-bearing processing - Ideal as a press table, comes from a 200 ton press dead weight 4700 kg good condition; used

Clamping plate with T-slots made of cast steel cast iron Base plate of radial drilling machine Length 1850 mm Width 915 mm Plate thickness 230 mm Table surface with T-slots 1030 x 750 mm- Clamping surface with T-slots 22 mm, distance = 250 mm - Top milled parallel to the bottom = clamping surface - Milled bottom also the webs lie flat on and carry- Ideal as base plate Net weight 1140 kg good condition; used

Manual slicer with integrated packaging module KUCHLER S.A.M. 300 psh + foil machine + packer Specifications: Type slicer: SAM 300 Psh T Type film dispenser: SAM IL - 4 - 220 Airless Type Packer: SAM T 26 230 volts / 50 Hz / 3.24 A Year of construction: 2010/2011 Film size: 21 x 26 & 21 x 22 cm several layers on top of each other can be welded Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 300 mm Stainless steel knife, Teflon coated Luminous flux Function tested, machine immediately ready for use! Condition, see original pictures! If you have any questions, email or call.

Quickcut cake slicemasachine Anneliese -with knife -mobile on wheels -400 volts -for 60x40cm sheets

Technical specifications: Max. width 330mm Max. Rewinding speed 200m/min Max. Control speed 250m/min Max Roll weight unwinder 150kg Max. Roll weight rewinder 70kg Max. Diameter unwinder 700mm Max. Diameter rewinder 400mm Max. Paper tension 5-100N Diameter Shaft unwinder 76mm Diameter Shaft rewinder 76mm Configuration: Unwinder Guidline Splice table Stroboscope Settings module machine Controle area (AVT camera not included) Bufferzone Extra webguide Niprol modules Slitting module (razerknives) Web clamp Rewinder (Friction shaft)

Meat cutting machine with program control different filing patterns Repaired

Food Tools CS4AAC round cake slicer Serial: 3697 2007, semi auto cake cutting machine will portion a variety of frozen and chilled round products such as cheesecakes, cakes, pies, frozen pizzas and more, up to 150 products per hour, comes with two cutting inserts, mobile

Food Tools CS4AAC round cake slicer Serial: 5250 2015, semi auto cake cutting machine will portion a variety of frozen and chilled round products such as cheesecakes, cakes, pies, frozen pizzas and more, up to 150 products per hour, comes with two cutting inserts and spare blade, mobile

Long-hole drilling machine Height adjustment of the drilling support by hand wheel Deep movement of the drilling support by hand lever Lateral movement of the table by hand lever Table size 690 mm x 300 mm Chuck 3-16 mm Maximum drilling depth 150 mm With many drills Dimensions 1100 mm x 700 mm x H 1200 mm Weight 412 kg

Control and feed spindle lathe Manufacturer Geminis Type GE870 Turning diameter 870mm Turning length 4000mm the machine also has a face plate 900mm and a fine bezel. Guides are very good, no wear to see. 400mm Forkardt wedge bar chuck 3 axis digital display Machine was stored about 3 years ago and is no longer used.

Column Mounted Crane 2 T MANUTENTION CONNECTION type PFSP Capacity: 2 Tons Arm travel: 2000 mm Year of construction: 2001 Column diameter: 400 mm Max height under hook 2200 mm Column height: 3100 mm Height under beam 2800 mm Electric hoist 2 T

Grote 613-90 slicer Serial: 1081458 stainless, variety of slicing applications including bulk slicing, stacking and shingling into portions, ideal for meat, cheese, vegetables, fruits and bread products, up to 90strokes per min, variable slice thickness 0.5mm - 12.7mm, cutting area 330mm x 152mm, with mesh outfeed, 1Ph

Qty. 1 Second-hand slitting line - dismantled Manufacturer: Mariani (Italy) Built: 1988/89 Electrical and controller are of 2006 Status: dismantled and in storage Strip width: 1500 mm Thickness: 0,5 - 3 mm Coil weight: 25 ton Coil ID: 500 / 700 Coil OD: 700 / 1700 Slitting shear rollers diameter 220 mm Knives dia.: 355 mm Line speed: 80 m/min.

Qty. 1 Second-hand slitting line - dismantled Manufacturer: Guida (Italy) Built: 1990 Status: dismantled and in storage Strip width: 1500 mm Thickness: 1.0 - 8.0 mm Coil weight: 20 ton Coils ID: 500/600 plus steel spacers for bigger diameter Shear roller diameter: 220 mm Knife diameter: 355 mm Speed: 0/25/50 m/min

Center height: 315 mm Center width: 1000 mm Circulating Ø: 630 mm Spindle bore: 74 mm Spindle holder: Size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 7 - 710 rpm Feeds: longitudinal/flat 0.063-4/0.030-2 mm/rev Thread pitches: 1 - 14 mm electrical connection: 380 V kW Space requirement: 2750 x 1250 x 1380 mm Weight: approx. 4200 kg

built 2009 - last recurring examination 10/21 - complete with test book, declaration of conformity, acceptance test, etc. - Boom 6 m, up to 400 kg - Chain hoist Star Liftket BF 021/51 500/2 - 4/1 - complete with wall brackets, cable drag, etc.

Boom 5 +6 m 2 pcs available ABUS GM 3 chain hoist, complete with underlays

Unwinder Web guide rotary die cut Missing label detection to check Waste rewinder Slitting Speed: 120 m/min

Nominal diameter 300 mm PN 10 bar

sliding carriage length: 2800 mm; cutting width with rip fence: 1350 mm; cutting width at the cross cut: 2800 mm; cutting height: scoring unit: yes; height adjustment: manual / crank; tilt adjustment: manual / crank; rip fence adjustment: manual; display saw blade tilt: digital; display saw blade height: -; display rip fence: scala; display at the cross cut: scala; saw blade diameter: 315 mm; speeds: 1; motor power: 4 kW; motor brake: yes - automatically; suction connection: 80 mm und 120 mm; machine length: 3000 mm; machine width: 2100 mm; weight: ca. 1000kg;

Carriage length: 3200 mm; Cutting width at width stop: 1250 mm; Cutting width at cut-to-length fence: 3200 mm; Cutting depth: 200 mm; Scorer: no; Height adjustment of saw blade: motorized; Swivel adjustment of saw blade: motorized; Adjustment of width stop: manual; Saw blade swivel range: 0Â to 45Â; Display saw blade angle: digital; Display cutting height: -; Display Width Stop: Scala; Display Cut-to-length ruler: Scala; Saw blade diameter: 550mm; Speeds: 3000 / 4000 / 5000 rpm; Engine power: 11 kW; Engine braking: yes / automatic; Suction connection: 100mm and 120mm; Machine length: 3600mm; Machine width: 2000mm; Weight: 1000kg; Made in Italy

Carriage length: 3200 mm; Cutting width at width stop: 1350 mm; Cutting width at cut-to-length fence: 3200 mm; Cutting depth: 125 mm; Pre-scorer: yes; Height adjustment saw blade: handwheel; Saw blade swivel adjustment: handwheel; Adjustment of width stop: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display Width Stop: Scala; Display Cut-to-length ruler: Scala; Saw blade diameter: 400mm; Speeds: 3000 / 4000 / 5000 rpm; Engine power: 7 kW; Engine braking: yes / automatic; Suction connection: 80mm and 120mm; Machine length: 3400mm; Machine width: 2000mm; Weight: 900kg;

Cutting length: 2500 mm; Cutting width at width fence: 1000 mm; Cutting width at cut-to-length fence: 1565 mm (telescopic extension up to 2550 mm); Cutting depth: 125 mm; Pre-scorer: yes; Height adjustment saw blade: handwheel; Saw blade swivel adjustment: handwheel; Adjustment of width stop: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display Width Stop: Scala; Display Cut-to-length ruler: Scala; Saw blade diameter: 500mm; Speeds: 3000 / 4000 / 5000 rpm; Engine power: 7 kW; Engine braking: yes / automatic; Suction connection: 80mm and 120mm; Machine length: 2900mm; Machine width: 1800mm; Weight: 800kg;

sliding table length: 3200 mm; cutting width at the fence: 1350 mm; cutting width at the cross cut: 3200 mm; cutting depth: 125 mm; scoring unit: ja; sawblade diameter: electric; tilting adjustment sawblade: electric; adjustment fence: manuell; readout sawblade tilting: Scala; read out sawblade height: -; read out fence: Scala; read out crosscut stop: Scala; sawblade diameter: 400mm; number of speeds: 3000 / 4000 / 5000 U/min; motor power: 7 kW; motor brake: yes, automatic; suction connection: 80mm und 120mm; machine length: 3400mm; machine width: 2000mm; weight: 900kg;

Cutting length: 2500 mm; Cutting width at width stop: 1250 mm; Cutting width at cut-to-length fence: 2550 mm; Cutting depth: 125 mm; Pre-scorer: yes; Height adjustment of saw blade: electric; Swivel adjustment saw blade: electric; Adjustment of width stop: electric; Display Saw Blade Angle: Digital; Display Cutting Height: Digital; Display Width Stop: Digital; Display of cut-to-length ruler: Digital; Saw blade diameter: 400mm; Speeds: 3000 / 4000 / 5000 rpm; Engine power: 7 kW; Engine braking: yes / automatic; Suction connection: 80mm and 120mm; Machine length: 3400mm; Machine width: 2000mm; Weight: 1000kg;

double-sided long-hole drilling machine with automatic duty cycle, maximum working width / stroke length of oscillation 120 mm, drilling depth max. 80 mm, table inclination max. 20°, tool clamping diameter max. 13 mm, drilling diameter max. 20 mm, spindle motor power 2.24 KW / volt. 380/50 Hz, spindle speed 9,000 rpm, oscillating motor power 0.75 KW, oscillation adjustable from 120 - 240 strokes per minute, pneumatic workpiece clamping, 4 suction nozzles D=80 mm, space requirement - depth 1,000 mm, width 1,300 mm, height 1250 mm, weight 500 KG; Technically and optically in very good condition

HofmannLangloch drill Brand Hofmann Type LL150 Year of construction Specifications: drilling depth max. 145 mm (drill head movement) Drilling length: max. 230 mm (table movement) Vertical drilling spindell run max.135 mm Drilling: Drilling depth limitation Table: side ward movement via sep. Handle Cast iron table: solid with mechanical product clamp Height adjustment: Handwheel Motor power 1.3 kW Chuck 5 - 20 mm Condition: functionally tested

Swing Chiselstemmer Measuring machine Stemmer swing chisel