skoda w used for sale

SPECIFICATIONS: Machinable tool: max. 230 mm Tool length: max. 240 mm Installed power: 1.1 kW EQUIPMENT: Replacement Grinding Wheels

diameter: div. number: 44x tool adaptor: SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Laservall 3,5 KW KUBO 100 EVO KE100E0109 Bouwjaar: 2009 Mitsubishi Control Microscoop voor het repareren/lassen van kleine onderdelen

plate width: 2000 mm sheet thickness - max.: 10 mm sheet thickness - min.: 3 mm number of straightening: 13 Rollers straightening roll diameter: 145 mm straightening feed: 16 m/min bale length: 2330 mm distance b/n rollers centers: 150 mm diameter of bottom rollers: 290 mm main drive motor: 30 kW weight: 32 t - number of bottom rollers: 21/24 - Number of supports (top/bottom): 3 /3 - speedof adjustm. of traverse: 0,71 mm / sec - way oftraverse: -18 mm to +42 mm - max. swivellower traverse: 8 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lathe Weipert

chamber volume: 4 und 5 liter useable volume: -- liter friction: - motor drive power: 2x 37,5 kW Condition: used or reconditioned Specification: 2x laboratory internal mixer – used Consisting of two mixing chambers: Type: GK4N - Capacity: approx. 4 litres - Rotor geometry: tangential type - Ram: pneumatic - 1 independent DC motor: 37.5 kW Type: GK5E - Capacity: approx. 5 litres - Rotor geometry: Interlocking rotors type - Ram: Hydraulic - 1 independent DC motor: 37.5 kW The system can be sold in its current condition. Currently not functional due to severed cables, or refurbished with new electrical parts, with CE certification and warranty. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weinig Profimat 22N four-sided planer Working width 220mm Working height 120mm Number of spindles 6 Spindle layout: Lower 4kw Rights Left 5.5kw Upper 5.5kw Lower 4kw Universal 4 Feed speed adjustable by variator 6-22m/min 3kw feed motor power Adjustable spindles

Cross milling machine Wigo 1016 Working length 750mm Maximum milling height 150 mm Spindle diameter 50 mm 15kw spindle motor 3kw Hydraulic Pump Motor Pneumatic material pressure Pedal control machine dimensions 1450 x 1600 x 1800h mm

stroke: - mm Cone: - mm Power: - kW weight: 3 t For boring mills up to 130-160 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1600 mm y-travel: 1250 mm z-travel: 1600 mm B-axis (table): 360.000 x 0,001° deg milling-head swivable +/-: (HV) 360.000° deg pallet size:: 1000 x 800 mm table load: 3000 kg tool taper: SK 50-B spindle turning speed range: max. 8000 U/min transmission ratio: 2 spindle drive: (100/40 % ED) 37/50 kW feeds x/y/z -stepless: 30000 mm/min total power requirement: 75 kVA weight of the machine ca.: t dimensions of the machine ca.: 11555 x 7998 x 5050 mm Universal machining center 5 axes simultaneously Original purchase price: EUR 1.295.000,- First machine installation in September 2011. A geometry measurement report (dated 30. August 2025) is available. Equipment: CNC-control Siemens 840D Solution Line 2-station pallet changer 330-position tool changer (max. tool length 600 mm) Tool taper cleaning system Special cabin Coolant tank 3.300 liters, pump pressure 4 bar/50 bar (Q1/Q2) Chi ...

Line for filling delicatessen products into plastic - trays, consisting of:, Vessel filling system, brand Waldner, type 12.3, year 2011, 2-track (2 different formats) – however, only single-track operation is possible., Format section 1: Round cup diameter 100mm (including edge) height 80mm and 60 mm, Format section 2: rectangular cup 185mm long 135 mm wide (incl. edge) 35mm deep, The shells are sealed with film from the roll, Roll magazine about 500mm long, 400mm wide, Space requirement Waldner: approx.: 2,100 m 2,100 mm, Discharge belt of Waldner: approx 1,800 mm, Dosing of liquid and free-flowing components:, The plant has two filling heads, which are filled via piping directly from the boiler., The pipe system can be fully purged., The toad line and Maso – Sinus Pump, type SPS 3, are included in the scope of delivery., Feeding of the multi-head weigher using two belt conveyors:, ...

Technical data of the pallet rack crossbar: Shelving system: Polypal Type: Stockpal The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: orange Box profile: 100 x 50 mm Type: SKVBN 09850NP33 Clasp: 2 HK (hooks) Clear width: 2,700 mm Max. load per pair of trusses 1,600 kg, with the same weight. Distributed load 02x Locking pins, used Design: completely galvanized For securing the longitudinal members Against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2000 mm Feed motor: 4 kW Feed speed: 5-24 m/min. 1 WEINIG Unimat 23 E Planer and moulder ------------------------------------------ 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ------------------------- Diameter 40 mm Speed 6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ------------------------- Shared motor with left vertical spindle Diameter 40 mm Speed 8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel ...

Various assembly tables for prefabricated houses in series Models 3.-meter X 6.meter to 9.meter Automatic installation of the house wall 12mx2.50m Total layout with 9 elements Viewing possible by appointment

Indramat Indramat DDS02.1 - W150 - DA01 - 01 - FW

Diesel shunting locomotiveWheel arrangement 2/2, wheelbase 2800 mmAxle load front/rear 14 tonnes/14 tonnes Drive power 147 kW

A Wotan internal roll grinding machine is available. Workpiece diameter: 1200mm, max. outside diameter: 1000mm, max. bore diameter: 900mm, travel X/Z: 370mm/800mm, swiveling: 15°, table travel: 500mm, grinding depth: 250mm, speed: 220rpm. Machine dimensions X/Y/Z: approx. 5000mm/3000mm/2200mm, weight: approx. 8500kg. Documentation vorhanden. An on-site inspection is possible.

Offered is a tensile testing machine year 1979 with retrofitted Doli testing software. Test material reinforcing steel, max. tensile force approx. 400kN, clamping tool: VAS Prüftechnik & Werkzeugbau year 2015. Inspection possible by arrangement.

HYUNDAI WIA SE 2200 LMSA CNC Lathe GENERAL Project No.: 905806 Quantity: 1 pcs. Manufacturer: HYUNDAI Type: WIA SE 2200 LMSA Control: HYUNDAI WIA Fanuc i-Series Year of Make: 2021 Condition: Used machine Spindle in approx (hrs): 2149 Program run approx. (hrs.): 4106 Approx. (hrs): 8655 DESCRIPTION TURN Max. turning diameter 300 mm Max. turning length 508 mm Max. circumferential diameter over bed 600 mm Max. chuck diameter 210/125 mm Max. speed main spindle 4500 1/min Max. power main spindle at ED 10-40/100% 15/11 kW Spindle aperture main spindle 65 mm Axes on the main spindle unit C Hollow clamping cylinder on the main spindle Max. speed sub-spindle 6000 1/min Max. power sub-spindle at ED 10-40/100% 7.5/3.7 kW Spindle Diffuser Sub-Spindle 32 mm Axes on the sub-spindle unit C/Z Blowing air through the sub-spindle Workpiece ejector in the sub-spind ...

Boring mill Manufacturer: TOS Type: WHQ 13.8 CNC Year of Make: 2000 CNC control: Heidenhain iTNC 530 Completely overhauled in 2022 Report available Travel: X/Y/Z: 3,500 x 2,500 x 1,250 mm Table length: 2,200 mm Table width: 1,800 mm Max. workpiece weight: 1,200 kg Spindle Ø: 130 mm Spindle speed max.: 3,000 rpm Spindle motor power: 37 kW Dimensions: LxWxH approx.: 7,500 x 6,950 x 4,000 mm Weight: 40 tons.

Key data: 1100 kN, 25 mm

warehouse no.: 503665 manufacturer: Wittmann Battenfeld type: EcoPower 110-350 controller: UNILOG B6P year of construction: 2014 operation hours: 56851 h clamping force: 1100 kN distance between tie-bars h x v: 470 x 420 mm size of mould plates h x v: 680 x 663 mm min. mould height: 200 mm max. mould height: 450 mm max. open daylight: 830 mm opening stroke: 380 mm screw diameter: 25 mm swept volume: 86 ccm injection pressure: 3000 bar equipment included screen text german Screentext Multi-Language CEE-socket 16A machine incl. water flow regulator Anti vibration mounts measures of machine l x w x h: 4.57m x 1.5m x 2.13m total weight: 4800KG

Offered is a rapid radial/column drilling machine. Drilling capacity: up to approx. Ø50mm. Speed range: 58-1275rpm. Thread cutting device: available, outreach: 920mm, machine lamp: available, baseplate/table size X/Y: approx. 1100mm/400mm, T-slots: 2 at the rear left, motor power: approx. 1.5kW without coolant system, machine weight: approx. 1200kg. Inspection under power by arrangement possible.

turning diameter over bed: 400 - 900 mm turning diameter over slide rest: ? mm turning length: 1000 - 1500 mm total power requirement: ? kW weight of the machine ca.: t dimensions of the machine ca.: m Free at short notice due to current company resolution In use until the end Untested, wear and tear due to age and use Machine package 5 x lathe 2 x CAZENEUVE HB 500 1 x WEISSER Junior 1 x SCHAERER UD 630 x 1500 1 x ERNAULT SOMUA HN 500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 250 mm turning length: 555 mm control: FANUC 18i-TB spindle turning speed range: 50-4500 + 5000 U/min turret head: 2x 24 12 angetrieben Dimensions (L/W/H): 8000 x 2300 x 2400 mm weight of the machine ca.: 7.5 t Y- & B- axes Misc. accessories more details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Starting Air Valve Wärtsila Sulzer From old stock Unused!

Starting Air Valve Air Starter for Wärtsila Sulzer RTA 48T-B Several available

Digital Center height 150 mm Circulation over bed 300 mm Center width 1000 mm 3-jaw chuck, Arbor Chip protection Chip tray

Manufacturer: WMS Model: W10 Year of Manufacture: 2014 Weight: 2800 kg Connected Load: 23 kW Rated Current: 33 A Operating Voltage: 400 V / 50 Hz Control Voltage 1: 24 V Control Voltage 2: not specified in plate Air Consumption: 9 m³/h System Pressure: 6 bar Certification: CE Find more here - / Contact us at -

Manufacturer: Kosme Model:Weighfill FC Year of Manufacture: 2015 System Description: Rotary filling and capping system designed for glass and plastic bottles. The system includes a 1,800 mm diameter weighing filling carousel with 40 filling valves and a 540 mm diameter capping tower with 12 capping heads. Both units are mounted on a common base. Container transfer between units is performed via transfer star wheels. Filling Section Filling principle: Rotary Max speed: 24,000 bph (depends on product type) Current format: 3 different formats (all 1000 ml) Container material: Plastic and glass Neck finish types: 28 mm uni-lok single thread / 38 mm special design Number of grippers: 40 Number of valves: 40 Hot fill: No Transfer type: Transfer star wheels Capping Section Capper brand: Arol Capper type: Rotary Working direction: Counterclockwise Machine pitch: 141 mm Max ...

2 oil coolers - through-flow oil coolers: year of construction 1998. Refrigerant: R404A, circulation pump, LAE controller MTR11, suitable for clean oil. Documentation available. 1) Type D 20 V, cooling capacity: 2kW, Walter Procon connector plug, total power consumption 1.7kW. 2) Type D 30 V, cooling capacity: 3.3kW, CEE connector plug, total power consumption 2kW. Dimensions X/Y/Z: approx. 800mm/750mm/1100mm. Inspection possible by appointment.

band width: 500 mm band speed: 8-25 m/min plate thickness: 0,5-2 mm total power requirement: 2,2 kW weight of the machine ca.: 0,75 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25387 Specifications: - Drilling capacity in steel 60 mm - Drilling spindle holder MK 5 - Drilling spindle stroke 300 mm - Digital positioning indicator for stroke and position - Projection 1600 mm - Column diameter 350 mm -Max. Distance: spindle – base plate 350 - 1650 mm - Vertical stroke of the boom 1250 mm - Spindle speeds: infinitely variable 30 - 1500 rpm - Feeds infinitely variable 1 - 600 m/rev - Drive 400 V / 8.9 kVa - 2 x dice table - Coolant device - Space requirement approx. W 2490 x H 2980 x D 1060 mm - Weight approx. 3800 kg

WSM SZ-250K Feeder The WSM SZ-250K is a feeding device from WSM-Automation, which has been specially developed for applications with high cleanliness requirements. The "k" in the type designation stands for "short" and refers to the shortened length of the sorting coil, which reduces the formation of abrasion due to level and vibrations. Function: It is a feeding device that combines the advantages of spiral conveyors with the need for clean processes. Special feature: The shortened sorting helix (effective length) is the core innovation to minimise contamination caused by abrasion. Scope of application: It is used where high cleanliness is needed during feeding to ensure a clean screw connection. Feeding unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with fill level control and dirt brake Spiral conveyor WFL 200 IU (200 mm) with separator Aluminum chass ...

WSM SZ-250K Feeder The WSM SZ-250K is a feeding device from WSM-Automation, which has been specially developed for applications with high cleanliness requirements. The "k" in the type designation stands for "short" and refers to the shortened length of the sorting coil, which reduces the formation of abrasion due to level and vibrations. Function: It is a feeding device that combines the advantages of spiral conveyors with the need for clean processes. Special feature: The shortened sorting helix (effective length) is the core innovation to minimise contamination caused by abrasion. Scope of application: It is used where high cleanliness is needed during feeding to ensure a clean screw connection. Feeding unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with fill level control and dirt brake Spiral conveyor WFL 200 IU (200 mm) with separator Plexiglass enc ...

x-travel: 14000 mm y-travel: 4480 mm z-travel: 3000 mm w-travel: 300 mm table:: table load: (145) 450 t table width: 3100 mm table length: 14770 mm Passage height: 3800 mm passage width: 3200 mm diameter of quill: 305 mm spindle turning speed range: max. 600 U/min spindle motor: 100 kW rapid travel x/y/z: 12 / 6 / 6 m/min output: 100 kW quill:: ISO 60 control: SIEMENS 840 D Powerline total power requirement: - kW total wight: - t dimensions of the machine ca.: - m Complete retrofit in 2010 - Siemens 840D powerline CNC control - Table guide: hydrostatic -- Hydrostatic system redesigned for max. load of 450 tonnes (with even load distribution) - Orthogonal milling head ISO 60 - Angle milling head ISO 60 - Additional attachment heads available that have not been used to date (extra option) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x1800x1250 mm Weight: 1700 kg Total power requirement: 23,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2300x1800x1400 mm Weight: 2300 kg Total power requirement: 37 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2300x1800x1400 mm Weight: 2500 kg Total power requirement: 37 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2100x1250x1750 mm weight: 700 kg total power requirement: 8,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1250x880x850 mm Weight: 180 kg Total power requirement: 1,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 690x771x790 mm Weight: 130 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1050x850x1300 mm Weight: 420 kg Total power requirement: 4,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x700x1600 mm Weight: 900 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 6800x3350x1500 mm Weight: 700 kg Total power requirement: 5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1300x680x1580 mm Weight: 400 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2150x480x1330 mm Weight: 230 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 960x900x1460 mm Weight: 100 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1200x1200x1400 mm Weight: 680 kg Total power requirement: 6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1150x1120x1310 mm Weight: 650 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1480x760x1160 mm Weight: 180 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.