skoda w used for sale

Technical data: -Load capacity 300 kg -Faceplate diameter 500 mm -Faceplate in grid levels of tilt - rotation Electr. infinitely variable approx. 0-1.2 m / min -Sweat power 650 A -Drive 220 V / 0.09 kW -Table height in horizontal position approx. 650 mm -Re + reverse - space requirement approx. B H 800 x 650 X 700 mm -Weight approx. 180 kg

Technical data: -max load capacity 3000 kg -Faceplate cross 1600 x 1600 mm -Faceplate cross extension tubes - faceplate cross mot. adjustable 0-90 / 135 ° - rotation infinitely variable 0,01-4 U/min -Right - + rotation control -Transmission of welding current approx. 500 A -400 V - table height in horiz drive. Position without stand approx. 1200 mm -Table height at horiz. Position with frame approx. 2200 mm -Space requirement approx. B H 1600 x 1200 + 1000 X 2400 mm -Weight approx. 2700 kg

Water tanks for crop sprayers, standing or lying flat, 3,000 L, 4,000 L, 5,000 L, 6,000 L and more. Used polyester tanks / GRP-tanks, water tanks, barrels, storage containers for field sprayers. We offer vertical or horizontal tanks, round or square shape, made from robust fibreglass, with several in- and outlets for filling your sprayer. Our tanks are used, have been professionally cleaned and are in good condition. The containers can further be used as storage tanks for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, for rainwater collection and so on. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already bee ...

GS14 - used approx. 100 m³ / 100,000 litres double-walled steel tank, heating oil tank, firefighting water tank, water cistern. In good condition, aboveground tank on two mounted steel consoles, storage tank, water tank, former oil tank, steel tank painted in green. capacity: approx. 100 m³ / 100,000 litres material: steel tank, double-walled, DIN6616/2 dimensions: Ø 2.9 m x approx. 15.8 m long weight: approx. 17.0 t manufacturer: Kraemer Apparatebau other: 2 entry shafts Upon request the tank can be repainted for additional charge. The container is used, has been emptied and professionally cleaned inside. According to the age there are traces of use. This steel tank / container can be used as a storage tank for many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask u ...

Web guider ElGuider, DRB1402, Erhardt+Leimer, new -40% Special price ! We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. The current new price of a similar product is about € 4.300. If you have an UID number, we will gladly issue an invoice without VAT Top condition like a demonstration unit The part was removed from a new machine, which can be proven to have run only about 100 hours. ELGUIDER - DRB1402 Rotary frame system Profinet with rotary frame DR 1401 in compact version for the control of a running web, with digital position controller and brushless actuator, Control frame for D100 rollers, - Size: Size 2, - Nominal width NB: 250 mm, - transfer length LUE: 250 mm - Sensor: FX 46 ultrasonic sensor, - Incl. existing cables - Sensor adjustment: Manual, Standard, - F ...

KEMPPI FASTMIG X 450 welding machine built in 2017 in Finland allows for both complex manual welding and efficient mechanised welding using the MIG/MAG method. The specially designed configuration of high-quality components delivers to its user excellent welding quality and performance, with unlimited flexibility for specialised tasks and materials. The KEMPPI FastMig welding machine is the perfect choice for professionals who value speed, precision and extensive machining capabilities. The KEMPPI semi-automatic welding machine consists of the following devices: – welding source: KEMPPI FastMig X 450 – wire feeder: KEMPPI WFX 300 – cooler: KEMPPI Cool X – 4-wheel trolley: KEMPPI PM500 Technical specifications of the MIG/MAG welding machine KEMPPI FASTMIG X 450 Power source - power supply: 3x 400 V (-15% to +20%); 50/60 Hz - maximum current (60%/100%): 450/350 A - ge ...

Technical data: -Plate thickness up to 6-40 mm -Pipe Beveling min. Ã? 100 mm -Max bevel in one run 10 mm - speed 2.6 m / min -Drive 400 V / 2,2 kW -Space requirement approx. B T 550 x 500 x H 700 mm -Weight approx. 65 kg

S5 - used 50m³ / 50,000 litres steel tank, double-walled, underground tank, firefighting water tank, water cistern. In good condition, underground or aboveground tank, steel storage tank, water reservoir. Surface coated with bitumen insulation / bitumen painting. capacity: approx. 50m³ / 50,000 litres material: steel tank / underground tank, double-walled manufacturer: Mannesmann dimensions: approx. Ø 2.5m x 10.0m long weight: approx. 8.0 - 10.0 tons The steel tank is used, has been emptied and professionally cleaned inside. According to the age there are traces of use. This container can serve as a storage tank for water, waste water, sewage, manure, seeping juice, rapeseed oil, or as rainwater collection tank, water cistern, firefighting water tank etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your dem ...

S6 - used approx. 1.5 m³ / 1,500 litres steel tank on wooden skids, double-walled, in good condition. Storage container, water tank, firefighting water tank, diesel fuel tank, heating oil tank. capacity: approx. 1.5 m³ / 1,500 litres material: steel, double-walled diameter: approx. Ø 1.0 m length: approx. 2.1 m overall height: approx. 1.2 m incl. skids The steel tank is used, has been emptied and professionally cleaned inside. According to the age traces of use are present. This container can be used as a storage tank for many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please ...

Available Recon

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Rasch Type: RR foiling machines for chocolate eggs with infeed System Year of manufacturing: 1987 pieces: 2 pieces output capacity: up to 150 pieces/min. Format on machine: Double twist Ei/Egg 43x27mm / Kugel/Bowl 30 mm. We offer this machine in 'as is' condition, without warranty excluded Vat, ex Work Germany, unpacked

Used weighing and packaging machine used for packing granules by TÉCNICAS MECÁNICAS ILERDENSES SL. model ILERSAC LBSD. New 2013. TECHNICAL DATA: PRODUCT CHARACTERISTICS: - Product BLACK COAL IN PROSPECT. - Density 340 / 645.16 kg/m3 - Fluidised Yes - Granulometry 30 µm - Sack type PAPER - OPEN BAGS - Bag weight 12 kg - Dimensions of bag 740x500x160mm - Dimensions of CP1 pallet 1200x1000x150 - Maximum pallet height 1800 mm Maximum production of 90 bags/hour CONNECTIONS: - Electrical connection 380V III+N+T 50 Hz - Installed power 12 kW - Control voltage 24 V - Air pressure 6 bar - Air consumption 150 NL/min. - Aspiration 1900 m3/h - 21 m/s Main features: - Programming of reading stability conditions. - Programming of weighing cycle and autocorrection parameters. - Zero variation detection range. - Precision: 5000 homologated divisions. - 50 operating reci ...

CIAT LG-LGP 900Z Product number:M18-4309 Cooling capacity:249 kW Refrigerant:R407C Refrigerant Content:12,3 + 13,3 kg Voltage:400 Volt Power consumption:67 kW Dimensions:2200 x 900 x 1700 mm Weight:1223 kg Year:2004 Number in stock:1 piece(s) Price:Quotation request Very nice water cooled Ciat water chiller with 4 scroll compressors distributed over 2 circuits. Mentioned capacity at a water temperature of +12/7°C (inlet/outlet) and an condenser water temperature of +30/35°C (inlet/outlet). Visit also our website: used-refrigeration

Used vertical wrapping machine by Ulma model VTC 700. New 2008. Vertical Fulfillment Wrapping Machine (VFFS) that forms a package with three seals. Designed for continuous packaging at high production speeds of up to 140 cycles/min. The VTC 700 machine is specially designed for continuous wrapping of many different types of products. The machine is extremely flexible in terms of changing the moulding size to allow for different portions and has the versatility to adapt to any type of film. Combine these features with the level of electronics specification and you have one of the most technologically advanced machines available on the market. Standard features: - Stainless steel version. - Servo-driven cross seal jaws (2 servo motors). - Servo driven film transport (2 servo motors). - Open front frame design. - Film spool holders with pneumatic wedges. - One-piece and eas ...

Washing machine 0.5 l bottle / 14,000 FL/h

We offer the following Doka Framax elements: Doka Framax Xlife 1.35 x 1.35m with 75% discount = 274,50€/pc net. 64 x Framax Xlife element 1.35x1.35m Accessories available on request. Formwork completely cleaned, inspected and sorted. Formlining fair-faced concrete class 2/3 possible without any problems. Out-of-the-box, suitable for higher-value use. If you have any questions, please contact Mr. Becker on 0049 176 70044689 purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Master Craftsman Company Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Ulm Registry Court: HRA722943 VAT NUMBER: DE279047055

Machine Type: Cold Water Hose Manufacturer: for washing machines Type: 1/2 inch Condition: new Offer will only be sent if a complete imprint is provided! Price 250 Euro incl. 19% VAT free loaded. Location Warstein , Germany Reference M-SCH-0124-3 DESCRIPTION We offer you a lot of new hoses / up to 10bar / 25 degrees Specifications can be found on the sign in picture 2. Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted!

Machine type MIG/MAG welding system Make MERKLE Type RedMIG 3000 D Connection voltage 3 x 400 volts Setting range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current setting 14 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Execution of mobile industrial plant with separate DV case Wire feed 4-wheel gearbox DV 26 Hedging 16 Ampere Dimensions L x W x H 940 x 445 x 1,040 mm Weight 140 kg Special accessories VB-cable 1.6 mtr. Long Age 9 months Condition very good, as new Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece pro ...

Transition / Stairs / Crossing, 3 stairs – used- : Price from location: 1.950.-€ (net), dismantled, packed and loaded! The position of the stairs on the landing can be changed. Manufacturer: unknown Type: unknown Year of manufacture: unknown Gratings Metrics: Platform height: approx. 1.60m Platform width: approx. 1m Platform length: approx. 3.65m (length outside incl. railing: 3.73m) Length: Stairs: approx. 2.10m Stair width: approx. 90cm Step spacing: approx. 20cm Step depth: approx. 26cm Step width: approx. 80cm Railing height: approx. 1.10m Gap between the platform supports: approx. 2.35m Condition: good – very good Available: now Location: Biebergemünd

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Belt Conveyor/ Conveyor Belt/ Webbing Manufacturer: VanderLande Condition: Used Year of construction: 2008 Total length: approx. 900 mm Total width incl. motor: approx. 660 mm Total width without motor: approx. 500 mm Belt width: approx. 400 mm Belt Type: Longitudinal Grooves and Smooth Material: Steel Frame height: approx. 170 mm Colour: Light grey Including SEW motor (0.75 KW) Stock: 1 piece The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for load ...

Steel tank, used approx. 100 m³ / 100,000 litres underground tank, water tank, firefighting water tank, water cistern. In good condition, underground storage tank for horizontal placement. capacity: approx. 100 m³ / 100,000 litres material: steel tank dimensions: approx. Ø 2.9 m x 15.8 m long weight: approx. 17.0 t other: exterior with bituminous insulation or bitumen painting The tank is used and has been emptied and professionally cleaned inside. According to the age traces of use are present. It is in good condition, yet slight insulation damage caused by transport may be present on the outside. This steel tank / container can be used as a storage tank for many different media. Also we can modify the tank to suit your demands, e.g. as a fire-fighting water tank, just ask us. Price upon request. Transport can be arranged at low cost. It is not possib ...

- Crankc. end Cover End Wall Cover MWM 12302284 - Suitable for several motors - Please note! Price per piece! - 12302284 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting  ...

Technical data for the workbench frame: Manufacturer: Stow Type: Pal Rack NS Basic dimensions: Width: 1,550 mm Depth: 600 mm Height: 900 mm The scope of delivery includes: 02x Workbench stand, used Material color: blue Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 04x Workbench trusses, used Material color: orange Box profile: 80 x 50 mm Clear width: 1,350 mm 08x Locking pins, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting The images serve to illustrate the material. The colour of the material may vary. - The workbench racks are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days. General information about the product: This item is available f ...

Technical data for the workbench frame: Manufacturer: Stow Type: Pal Rack NS Basic dimensions: Width: 1,550 mm Depth: 800 mm Height: 900 mm The scope of delivery includes: 02x Workbench stand, used Material color: blue Stand height: 900 mm Stand depth: 800 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 04x Workbench trusses, used Material color: orange Box profile: 80 x 50 mm Clear width: 1,350 mm 08x Locking pins, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting The images serve to illustrate the material. The colour of the material may vary. - The workbench racks are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days. General information about the product: This item is available f ...

-Three-way cock MWM 12022945 - Suitable for several motors - Please note! Price per piece! - 1202 2945 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new ...

Belt Conveyor/ Conveyor Belt/ Webbing Manufacturer: Overbeck Condition: Good (Used) Total length: approx. 2450 mm Total width incl. motor: approx. 660 mm Total width without motor: approx. 510 mm Conveyor width: approx. 450 mm Strap Type: Grip Steel frame Frame height: approx. 140 mm Stock: 5 pieces Price per piece The conveyor system has run until it was dismantled. Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods! We would be happy to provide you with an individual offer or advi ...

More information on request Excellence working condition

Cold water tank, second-hand, Fabr. Gresser, net capacity: 400 hl; Total capacity: approx. 427 hl, in chrome-nickel steel 1.4301, insulated with 150 mm PU foam and covered with trapezoidal sheet metal, standing on a concrete base, for pressure-free operation, Brewing water tank, used, Fabr. Gresser, net capacity: 250 hl, total capacity: approx. 265 hl, in chrome-nickel steel 1.4301, insulated with 150 mm PU foam and covered with trapezoidal sheet metal, standing on a concrete base, for pressure-free operation, Extrusion Storage, Fabr. Gresser, total capacity: 169.20 hl, operating overpressure: 6 bar, in chrome-nickel steel 1.4404/1.4571, insulated with 150 mm PU foam and covered with trapezoidal sheet metal, standing on a pedestal frame, Ø: 2,140 mm, total H: 7,673 mm,

P123 - used approx. 3 m³ / 3,000 litres polyester tank, GRP-tank, aboveground, vertically standing, on steel frame, in good condition. technical details: capacity: approx. 3 m³ / 3,000 litres material: polyester / GRP manufacturer: Erka dimensions: approx. h total = 2.30 m / w = 1.10 m / l = 1.60 m Used storage tank in good condition, standing, hatch on the front side, several in- and outlets. The container can be used as a storage tank for many different media such as water, liquid feed, whey, molasses, liquid manure, rapeseed oil or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in  ...

AUTOMATIC GUILLOTINE type TAGLIABUE TIA 3050 second hand hydraulic cutting system Cutting length mm 3020 Pressor stroke mm 110 Electrical rear feed - Max rear feed width mm 1250 - min rear feed width mm.23 Hydraulic unit motor power Hp 10 Rear feed motor power Hp 0.75 Safety photocells Weight kg 4000

New water jet cutting machine Make: aps Type: 3D 5-axis 301508 Little hours Conversion to pure water operation possible Year: new -Latest generation of control -Latest servo drives -Latest CAD-CAM software -Latest high pressure pump 22 kW -Latest Abrasivausrüstung with cutting head, Abrasivdosierer and storage containers Work area: L: 3000 mm x B: 1500 mm x H: 800 mm Dimensions: L: approx. 5000 mm, B: approx. 3500 mm, H: approx. 3200 mm Z-axis: optional with collision protection Cutting speed: up to 10 m / min. Positioning accuracy: ± 0.1 mm (500 mm travel) Repeatability: ± 0.05 mm Die heads: 1 x Abrasivschneiden or 1 x pure water cutting Electrical connection: 3 x 400 V, 50/60 Hz.; 35 A slow Compressed air connection: approx. 20 NL/min at 6 bar Water connection: depending on the used high pressure pump High pressure pump: 22 kW Pres ...

Technical data: Stand height: 2,000 mm Shelf depth: 600 mm Shelf length: 2,550 mm Usable area: 2,450 x 600 mm Consisting of: 2x Shelf stand 2,000 x 600 mm / unassembled 6x Trusses 2,450 mm 3x Insert bottom - 22 mm chipboard / raw Specialist load: 300 kg / at evenly distributed load Further attachment shelves of this variant are available for 155 € / piece incl. VAT ! These shelves are also available in other sizes. Let us create a free offer. Shipping possible on request.

- Cooling water line cooling water pipe MWM 12300128 - Suitable for several motors - Please note! Price per piece! - References -> 12300129 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By co ...

Technical data: Stand height: 2,000 mm Shelf depth: 600 mm Shelf length: 2,050 mm Usable area: 1,950 x 600 mm Shipping Weight: approx. 130 Kg Consisting of: 2x Shelf stand 2,000 x 600 mm / unassembled 6x Trusses 1,950 mm 6x Steel - Insert - 965 x 547 mm 4x Metal base Specialist load: 400 kg / at evenly distributed load Further attachment shelves of this variant are available for 184 € / piece incl. VAT ! These shelves are also available in other sizes. Let us create a free offer. Shipping possible on request.

- Cooling water line MWM 12300538 - Suitable for several motors - Please note! Price per piece! - References- > 12300535 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting a ...

Warm air heating Spanex UL/E-50 RW-02 with chips 40 kW L x W x H: 1970 x 820 x 1570 cm Weight 530 kg Year 2012 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Process water chiller / chiller / chiller water cooled, Type: TWEevo Tech 381 P3 MTA S.p.A. TWEevo Tech 381 P3 are air-cooled compact water chillers that are suitable for outdoor installation (-5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 60 ltr., built-in P3 pump. Cold water outlet temperatures from -10°C to +30°C can be adjusted. Cooling capacity kW 72.2 [20.5 tons cooling] Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 12.3 Available pump pressure (bar) 3.46 Cooling water temp. Outlet/Entry (°C): 45 / 40 Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 39 Max. current (A) 66 Starting current circuit (A) 234 Protection class: IP54 Dimensions: Length (mm) 2790, Width (mm) 1150, Height (mm) 2020, Weight empty / filled (kg) 975 / 1385 Connection R ...

5 PCS AVAILABLE BRAND FRIGEL MANUFACTURED 2007 CONDITION USED - IN WORKING ORDER QUANTITY AVAILABLE 5 UNITS MODEL RCD180/24 (180 LTS PER HOUR) TEMPERATURE RANGE 23 TO 194 F (CELCIUS -5 TO 90) VOLTAGE 400 VOLTS FREQUENCY 50HZ SHIPPIING WEIGHT 395.00 Kgs MAX CURRENT 52 AMP FLUID H20 MAX PRESSURE 8 BAR REFRIGERANT R407C HIGH PRESSURE 27 BAR LOW PRESSURE 22 BAR abc.FRIGEL.IT

New water jet cutting machine Manufacturer: aps Type: Jetcut integral 2030 Little hours Conversion to pure water operation possible Year: new -Latest generation of control -Latest servo drives -New high pressure pump 22 kW -New Abrasivausrüstung cutting head, Abrasivdosierer and reservoir workspace: 2000 mm x 3000 mm Dimensions: L: approx. 4600 mm, B: approx. 2900 mm, H: approx. 1500 mm Z-axis: 180 mm, full servo axis, optionally with collision protection Cutting speed: up to 15 m / min. Positioning accuracy: ± 0.1 mm Repeatability: ± 0.05 mm Die heads: 1 x Abrasivschneiden or 1 x pure water cutting Electrical connection: 3 x 400 V, 50/60 Hz.; 35 A slow Compressed air connection: approx. 20 NL/min at 6 bar Water connection: depending on the used high pressure pump High pressure pump: 22 kW Pressure: depending on the used high pressure pu ...

- Cooling water line MWM 12300048 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technol ...

We can offer 12 sets of Barmag winders,manufactured in 2022, model:Manta ACW6T 1500/16,16 ends,chuck length:1500mm.Never used,still in packing. Seious buyer contact us please. We have many brands and models machines, tell me what you need seriously!

Type Overture ES Voltage 230 V (50 Hz) Made in USA Transport dimensions 600x400x500 mm Weight 15 kg

- Raw water line MWM 12141963 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologie ...

- Cooling water line MWM 12300542 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technol ...

Plate warmer. Dish warmer. Heating cabinet, Plate warmer Brand: Lowerator Type: 2SHE For plate 26cm diameter Number of pieces: 2 Other details: Please see photos All information without guarantee

HITACHI WIRE EDM MACHINE MODEL MS 250 H-CUT 8Q X-AXIS STROKE: 1030 MM Y-AXIS STROKE: 810 MM Z-AXIS STROKE: 530 MM

Butterpack machine, margarine packaging machine, packing machine Stations: Swivel cell Paper fending and folding equipment With photo cells pressure centering Date stamp station with thermal pressure Volumetric dosage with trough Final folding station Parcel launch station Exhauting tape 1,000 mm long Format: 100 x 75 x 35 mm = 250 size or other format for additional price Products: Butter or similar products Dosage: Volumetrical 100 â 250 grams, infinitely adjustable Dosage accuracy: +/-1% Unwrap material: Parchment, concealed aluminium foil Date: Dye-stamp print Power: 40 packages/min.

Machine Type: TIG Inverter Welding Machine Water-cooled DC and AC system Make Lorch Type V 30 AC/DC Connection voltage 3 x 400 Volt Adjustment range 3 – 300 amps Duty cycle 60% ED at 300 amps 100% ED at 250 amps Infinitely variable current adjustment max. weldable material thickness steel / stainless steel = 8 mm Aluminium = 5 mm Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant Fuse protection 32 amps Dimensions L x W x H 1,130 x 450 x 815 mm Weight 108 kg Age approx. 10 years Condition workshop-tested, very good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG torch Binzel WHW 18 SC, 4 mtr. long 1 piece of ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 1 ...

Welding turning and tipping-positioning table Technical data: -Load capacity at horizontal position 15000 kg -Load capacity in vertical position 10000 kg -Planpauc diameter 1850 mm -Plane disc with crane support can be swivelled continuously -Rotary motion electr. infinitely controllable -Right-Link Run -Drive 400 V -Ft remote taster -Massea cables -Welding current transmission 500 A -Table height at horizontal position 1850 mm -Space requirements approx. B 2450 x H 1850/2300 x T 3000 mm -Weight approx. 6000 kg

1 of used film-only multi-packer, make KHS/Kisters, type SP A-H (Advanced, High-speed), with ST-A 1000 shrinktunnel, new 2008. Siemens S7, Indramat MI-Technik servos, automatic film splicer. Operating side: left. Used for upto 120 cycles/minute in a 72.000 cph line. Set for standard beverage cans (66 mm) packing them as 2x2=4, 3x2=6, 4x2=8, 4x3=12, 5x2=10 and 5x3=15. Quick change-over machine.