skoda w used for sale

Year of construction 2013 3 kW Container volume 0.5 sqm, load capacity 1000 kg Weight 230 kg Original price approx. 10000,- EUR Very good condition, little used

General SKU200W007 MakeWaterleau TypeDiam 1210mm-L=3600mm No.2.11.560 Year of construction2013 LocationBarneveld Main Features MaterialStainless steel Motor5.5 KW Specified Features - Miscellaneous mixer MaterialStainless steel 1.4301 (304) Mixercheck Information Floor space5,65x2,65 mtr Total height2,20 m Weight6470 kg CEcheck Extra Specificationsdrum mixer with spraynozzles. -Drum diameter 1210mm. -Lenght 3600mm. - Input and output to belt conveyor. - Input 350x350 mm, output 600x400 mm - R77 Helical gearmotor, speed 1455/104 rpm, 5,5 kW  : Technical specs Extra informationagglomeratorMiscellaneous mixersWaterleauMiscellaneous > Miscellaneous mixersBrand > Waterleau What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in  ...

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (17 kW), motor cover, base plate, feet and inlet/outlet pipes with flow indicator., Additional features:, Excluding:, - Water valves., - Control panel., - Service tools for maintenance., Type of Machine: Cream Separator / Skimmer, Capacity: 7.000 liter per hour, Bowl speed: 6.500 rpm, Motor: 17 kW - 380 V - 50 Hz - 1.445 rpm - 34 A , Dimensions: 170 x 120 x 175 cm, Weight: 1.300 kg

Various Tool Quick Couplers, PARAT, WDR 4 , WDL4, WD4, WB4 , Price per quantity on request

Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Control: Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ---------------------------------------------------------------------- This machine is currently being refurbished at our facility! Pictures taken before dismantling and currently during the processing phase! Brief Summary: ---------------------------------------------------------------------- 5 spindles with 8,000 rpm 4 x HSK/Powerlock Axially and radial CNC adjustments of the spindles via control CNC-controlled adjustment and positioning of the feed Table tops with guide blades at spindles 2 and 3. Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ---------------------------------------------------------------------- - Tec ...

I am selling a vertical continuous CNC milling and drilling machine HOMAG Weeke Drillteq V-200 (formerly BHX 055), built in 2023. Configuration: 1 pc. milling unit with tool change 4-positions HSK63 13 + 4 + 2 pcs Drilling Spindles 1 pc grooved saw Feed back, which slices the elements back to operator or rear as the conveyor machine. Condition as good as new. With full documentation and CE Available the same.

Various Tool Quick Couplers, PARAT, WDR 4 , WDL4, WD4, WB4 , Price per quantity on request

TECHNICAL DATA: Width of inlet planer: 1970 mm Working width: 250 mm Working height: 150 mm Spinel: Ø 40 mm Number of Spindles: 5 Cardan shaft drive (2.2 kW) Speed: 6000 rpm Installed power: 22 kW Voltage: 380 V SPINDLE CONFIGURATION: I bottom (4 kW) II-III right-left (5.5 kW) IV above (4 kW) V bottom (4 kW) ACCESSORIES: Complete with tools Miscellaneous Accessories

A hydraulic double-column drawing press, which has only been used as a die tryout press, is available. Press force: 2500kN, stroke: 400mm, max. installation height: 600mm, table dimensions X/Y: 1250mm/800mm, column clearance: 1350mm, side passage: 640mm, table height: 800mm. Machine dimensions X/Y/Z: approx. 5700mm/3600mm/2800mm, weight: approx. 36000kg. The machine received a new screen, a hydraulic pump, a Sitema fall protection system, a press cylinder seal kit and an oil change in the last 12 years. Documentation available. An on-site inspection is possible.

Wheel width: 600mm, module range: 2-16, cutter dimensions X/Y: 240mm/280mm, table diameter: 1020mm, speed: 200rpm, swiveling: +/-45°, max. wheel diameter with/without counterholder: 1250mm/800mm. Machine dimensions X/Y/Z: approx. 4500mm/2100mm/3300mm, weight: approx. 16200kg. An on-site inspection is possible.

max. workpiece length: 6360 mm profile spindle: 1 Stück main drive: 13 kW Control: CNC SCM CNC Machining Center ACCORD 40 FX for windows and doors --------------------------------------------------- INCLUDES extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden style windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows Machine still in operation, available for viewing! Technical Summary (detailed description available upon request!): --------------------------------------------------- - Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for Prisma T-S angle gearbox - BRC - W ...

grinding diameter: ca. 250 mm grinding length: 200 mm centre height: 85 mm total power requirement: kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Band width: 200mm; Band length: 2600mm; Table size: 935mm x 460mm; Additional table: 350mm x 300mm; Veneer sanding equipment: yes; Oscillation: yes; Grinding unit swivel: yes; Suction port: 120mm; Motor power: 2.25 kW; Machine length: 1700mm; Machine width: 800mm; Weight: 400kg;

Wheels: 4; Speed levels: 2;

turning diameter over bed: 297 mm turning diameter over bed slide: 160 turning length: 500 mm short taper holder: Größe 5 spindle bore: 36 mm spindle turning speed range: 30-3550 U/min number of speeds: 18 quill adjustment: 90 mm tailstock quill taper MT: 3 cross adjustment: +15 tailstock adjustment - manual: 500 mm total power requirement: kW weight of the machine ca.: 610 kg dimensions of the machine ca.: 1,4 x 0,7 x 1,2 m wedge bar chuck Forkardt: Ø 160 mm Accessories: Forkardt V-block chuck, Ø 160 mm Collet chuck, Collets, Steel Multifix system, size A with 3 quick-change inserts Integrated center point Chip guard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 300 mm

Radial saw Wigo Pull saw Saw blade diameter 300 mm Cutting height maximum 85 mm Cutting width maximum 650 mm Motor power 2.2 kW Sawing unit swivels by 0°- 90°- 0° or 180° overall Height-adjustable sawing unit Mounted on machine table Total dimensions 2800 mm x 1250 mm x H 1400 mm

used storage system Coilamat C8.50.1320 SL Store and manage like a pro - Permanent sheet metal stock at a glance - Safe storage - Convenient and gentle storage and retrieval of material - No scratching and damage - Eight material nacelles with reliable chain drive - Coilamat with roller shears and hold-down device - Ideal for small coils - quick to access Belt width 1,250 mm Coil weight load capacity 250 kg Total power requirement 400 V / 16 A Color: Blue Load capacity in kg 250 kg Weight 950 kg Dimensions 1630 x 1840 x 2710 mm Number of gondolas 8 Machine number C150SL Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is being carried out

Previously used for filling Sourcrout and potato salad 250g - 1000g Up to 55 1Kg batches per min

4ft–5ft solid wood dining tables Strong and durable Spacious tabletop, great for study, work, or home office If interested, kindly contact Mohna 012 3555489 (mohnambikaitopglove.com) or Ms Arina (arinatopglove.com.my) F3

Cyclon heat-insulated from the GEA brand model CYCLONE CHE 394. Year 2017. With 2 cards. Bottom outlet DN100. Top Entry Clamp 1" Clamp 1" and 4" side entrances. No documentation. Cyclon Dimensions: Length 650 mm Width 560 mm Height 1510 mm Technical characteristics Model CYCLONE CHE 394 Year of manufacture 2017 Equipment dimensions INTERIOR BODY WIDTH 560 INNER BODY LENGTH 650 INTERIOR HEIGHT BODY 1510 Transportation Information Length 2150 mm Width 992 mm Height 1100 mm Documentation No documentation Status In your state Manufactured by GEA WESTPHALIA

WESTFALIA brand plate centrifuge model SC 35-36-177. Year 1995. Includes Netzsch mono pump 4 units in stock Transport dimensions: Centrifuge: Length 1550 mm Width 1200 mm Height 1400 mm Weight 1300 kg Mono Pump: Length 1800 mm Width 700 mm Height 1600 mm Weight 350 kg Technical characteristics Model SC 35-36-177 Year of manufacture 1995 Equipment Setup Includes tools for disassembly Mono pump Documentation Maintenance Manual Operation Manual Electrical diagrams Spare parts list

WESTFALIA brand plate centrifuge model SC 35-36-177. Year 1995. Includes Netzsch mono pump 4 units in stock Transport dimensions: Centrifuge: Length 1550 mm Width 1200 mm Height 1400 mm Weight 1300 kg Mono Pump: Length 1800 mm Width 700 mm Height 1600 mm Weight 350 kg Technical characteristics Model SC 35-36-177 Year of manufacture 1995 Equipment Setup Includes tools for disassembly Mono pump Documentation Maintenance Manual Operation Manual Electrical diagrams Spare parts list Status In your state Manufactured by WESTPHALIA

53,700 liter brewing water tank with insulation, built in 2022 Material No. V2A Total height 10500 mm Height 9700 mm diameter 2800 mm Outer diameter 3230 mm Interior surface 2B=IIIC ground Exterior surface 2B=IIIC ground Year of construction 2022

51,570 liter ice water tank/pressure tank with insulation Material No. V2A Total height 10200 mm diameter 2900 mm Outer diameter 3480 mm Interior surface 2B=IIIC ground Exterior surface 2B=IIIC ground Minimum/maximum operating pressure (HP) 0.4 bar Operating temperature 90 °C Cylinder length 6500 mm Year of construction 1994 dished end/ domed end Cylinder: 15cm insulation 4 x sensors Manhole 440 x 340 oval Underbody: Dished end/domed end with foot ring and crane eye

Weinig Hydromat 2000 planing line with in and outfeed system, Manufacture year 2008, Consisting of:, - Weinig automatic infeed system High Mech E1, - Weinig moulder Hydromat 2000, - 6 spindles: B-R-L-T-T-B, - feed speed max. 60 m/min, - straight and profile jointers, - Weinig automatic outfeed system High Mech A1

CNC horizontal boring machine Type: WHN 13.8 B Manufacturer: TOS Year: 1987 In 2026 control replacement for Heidenhain TNC 530 X: 3500 mm Y: 2000 mm Z: 1250 mm W: 800 mm Spindle diameter: 130 mm Spindle taper: ISO 50 Table: 1800 x 2200 mm Max table load: 12000 kg Machine weight: 36000 kg In good condition, fully functional Find more here - / Contact us at -

Offer 26089 Technical data : - Manual rotation by 180° ( 90° left + right ) - Manual tilting by 90° - Load capacity with 4 suction cups at 80% operating vacuum 0.32 t - Suction cup diameter 280 mm each - Dimensions 715 x 833 mm - Distance or height lower edge of suction cup – crane hoe 950 mm - Vertical installation depth 230 mm - Operation with mains-independent 12 V battery - Battery charger 220 V - Space requirement approx. W 300 x H 300 x D 1600 mm - Net weight approx. 60 kg - Transport crate W 1800 x H 450 x D 400 mm

- NE eddy current separator type Wagner - With vibratory feed conveyor - Conveyor width 1200 mm - Outdated condition

Universal kneader, Fabr. W & P , Type UC 120 ACN

Flour shaker, Fabr. Fritsch , Type Roller Spreader , 620 mm

Multifuel 1Wartsila 19.5 MW CHP Power Plant with 2 × 20V34DF (2021) This 19.5 MW multifuel (Gas / HFO / LFO) combined heat and power (CHP) plant is equipped with two Wartsila 20V34DF generating sets and exhaust gas heat recovery boilers. The plant was commissioned at the end of 2022 and has accumulated approximately 20,000 operating hours since new. All operation and maintenance activities have been performed by the Wartsila OEM Service team, ensuring that both the generating sets and auxiliary systems are maintained according to standards and remain in near-new condition. The plant is currently fully operational, available for immediate delivery, and can be load-tested for qualified buyers. The scope of delivery includes complete mechanical equipment capable of producing 19.5 MW of electrical power, 9.0 tons/hour of saturated steam at 10 bar and 8 MW of 90C hot water . In ad ...

General SKU043R201 MakeEllerwerk TypeWFZ 630 No.90.005 Year of construction1991 LocationBarneveld Main Features MaterialHastelloy Motor22 KW Inlet diameter630 mm Specified Features - Basket centrifuge Basket centrifugeBasket on horizontal shaft Basket sizesDia. 630x230mm Wall thickness10mm Max. loading weight100 Kg With scrapercheck Hydraulic operatedcheck Liquid outletwith filtrate cyclone Motor22 kW, 380 Volt (Ex) Max. basket speed2000 rpm MaterialStainless steel 2.4602 (Hastelloy C-22) Information ATEX compatiblecheck Extra Specifications- Inverting bag centrifuge DiscountBasket centrifugesEllerwerkDiscountCentrifuges > Basket centrifugesBrand > Ellerwerk What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneve ...

Horizontal turning machine manufactured in 2008. This Weiler E50x2000 features a center distance of 2000 mm and a swing over bed of 570 mm. It has a spindle bore of 83 mm and a maximum torque at the spindle of 1600 Nm. Fully overhauled in 2026, it includes significant upgrades for enhanced performance. If you are looking to get high-quality turning capabilities, consider the Weiler E50x2000 machine we have for sale. Contact us for further details.

Manufacturer: Wolf Power Systems Model: GTK 50E0 Year of Manufacture: 2021 Type of Machine : CHP UNIT Condition : Never used, never even connected CE Certified: Yes Technical Specifications • Engine Type: Hoeckle HMG 434 S • Generator Type: Marelli MXB-E 225 MA/4 • Fuel: Natural Gas H (Erdgas H) • Electrical Output: 50 kW • Thermal Output: 90 kW • Power Consumption: 146 kW • Gas connection pressure range: 25 to 60 mbar • Maximum operating pressure: 4 bar • Maximum coolant inlet temperature: 90 degrees C • Rated voltage: 400 VAC 3PH 50Hz • Supply fuse: 100 A • Protection class DIN VDE 0470: IP 22 Find more here - / Contact us at -

faceplate diameter: 4.000 mm travel -x axis: 4.500 mm travel -z axis: 600 mm control: Siemens Sinumerik 840D-sl feed range: 0 - 8.000 mm/min turning speeds: 1) 0,7 - 5,6 U/min turning speeds: 2) 2,8 - 22,4 U/min turning speeds: 2,1 - 56 U/min tool taper: Sauter Facing Lathe | ZERBST - DP05/W08 Scope of delivery: - Chip conveyor - Hydraulic unit The ZERBST - DP05/W08 has been retrofitted in 2010. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DP05W08 | DP05 W08 | DP05-W08 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis WEMAS VZ 750 CENTURY was manufactured in 2001. It features an X-axis travel of 750 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine includes a Heidenhain TNC 426 control unit, an electronic handwheel, and a tool changer. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 750 CENTURY vertical machining centre we have for sale. Contact us for further details.

Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. control: Memory-Funktion Weinig Powermat 500 with grooved table ---------------------------------- The machine arrives at the warehouse and is cleaned and fully inspected. Brief Summary: ---------------------------------- - 5 Spindles - 8,000 rpm - Grooved table for short or difficult-to-guide workpieces, coated with Marathon PowerCoating - One driven roller in the outfeed table, hardened: 210 mm wide - Left and top spindles controlled for width and height - Quick-release spindle nut Detailed Description: ---------------------------------------------------------------------- - Technical Data: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 5 1st Spindle - bottom ----------------------------------------------- Motor with ...

Wickert high-precision hydraulic press WKP 5000 S with sliding table. Total pressing force 5000 kN. Table size 1800 x 1200 mm, installation height min 800 mm, installation height max. 2300 mm. Opening stroke 1500 mm. Sliding table extendable 1500 mm. Year of construction 2011 very good condition. available from week 22/2026.

Weiler Condor B with Heidenhain 3 - Axle Digital Display -Circumferential diameter over bed 330mm -Turning diameter above the face slide 185mm -Tip height 165mm -Turning length 750mm -Spindle speeds 22-2800 rpm -Spindle passage 40mm -Tailstock quill holder MK 3 -Quill stroke 110mm -Total power requirement 3kW -Heidenhain 3 - Axis Digital Display -Multifix holder -Multifix cassette 3 pieces -3 jaw chuck Forkardt -div. machine key -Machine feet -LED work light -Lining protection with electrical shut-off -Revolver stop -Documentation/Instruction Manual Dimensions: LxWxH 1.8x0.8x1.2 meters / 1040Kg

Used 5-stage evaporation station by Gea Wiegand. Year of construction 1986. Capacity 10000 L/h. Reconditioned in 2008 with exchangers + computer control by B&P. Also added in the same year was an aroma column built by B&P and designed by Dipl Ing K.H. Volp.

Size: 920×1300 mm Equipments: Maximum sheet size 920×1300 mm, minimum size 560×1300 mm opening width within frame 920×1310 mm, maximum die size 910×1300 mm maximum die-cutting area 900×1300 mm, maximum gripping edge = 16 mm, minimum gripping edge = 8 mm maximum card thickness 3 mm (also with micro-flute and flute zero), maximum compressed air pressure 500 t, maximum stroke rate 5500/h infeed stack height 1100 mm, outfeed stack height 1100 mm, main motor power 18 kW, main motor power consumption 17 kW, speed 5500 strokes/h. Machine dimensions (L x W x H): 6835 mm x 3580 mm x 2690 mm. Total weight of the machine including the insert approx. 30 t, weight of the machine without the insert approx. 29 t

Key data: 130 mm

Stock# UG6397 Used line for WPC (wood plastic composite) acoustic panels production. Line had been working on acustic panels with width 600 mm x length up to 6 m. Maximal possible width up to 900 mm. Line consist of: - Twin screw, co-rotating extruder by Weber (D) model DS 13.27. Machine has twin screws, each with diameter 130 mm. Working length LD = 27. Extruder is driven by el. motor 145 kW. Barrel has 12 heating zones, each with el. heaters 5.5 kW. Includes Transi-Tec mixing and dosing device and unused spare barrel. - Calibrating table by Techno-Plast with 4 pcs of vacuum pumps (each power 4 kW) and one blower with power 1.1 kW. - Pull-off with a saw by Techno-Plast, driven with motor 5.7 kW - Profile collection table - Vacuum pump (Busch) - ONI water cooling exchanger Line new in 2010.

Key data: 28000 KW, 13000 V

Technical details are as follows: Engine Model: W18V32 Generator Maker: ABB Output: 7,050kWe x 720 rpm Frequency & Voltage: 60Hz & 13,800V Year of Production: 2001 Running Hours: Approx. 25,000 hours Fuel Oil: Diesel Oil, HFO The scope of supply is as follows: Generators: 4 units Control Units: Complete set for all 4 units Oil Purifier Units: 4 units, each with an oil tank Compressor Tanks and Compressors

Weima Type: ZM 30 Motor 2x 11kW Hours: 1243 Feed size at the bottom approx. 500x450mm Hopper at the top approx. 1m x 1.2m Transport Dimensions Height 2m, Width 1.6m, Depth 1.6m Weight approx. 1400kg We have been engaged in the sale of woodworking machines for 25 years. Our machines are 100% inspected before sale, and we attach great importance to the satisfaction of our customers. You are welcome to visit and try out the machines in advance to convince yourself of their quality and functionality. If you have any additional questions, please feel free to give us a quick call or send us a message. Net price plus VAT

Absolutely new belt dryer make New Eco Tec Woody 500-100-1.0 SP, built in 2019. Very well preserved, as good as new facility. Immediately available. Suitable for drying fines up to 1.5 to/h. Input moisture up to 50%. Water evaporation up to 500 kg/h! Heating medium warm air 90°C to 110°C. Takeover possible immediately!

Key data: 3915 KW, 6000 V

Wartsila 3.9 MW/50Hz Gas Generating Set 12V34SG with CHP Auxiliaries This power plant was built by Wärtsilä at the end of 2010 and commissioned in 2011 as a turnkey project, equipped with a heat recovery system for 10 bar steam production. The plant operates on standard natural gas supplied via a local pipeline. It was in operation until 2021, accumulating a total of 43,767 running hours before being shut down. The complete installation includes a step-up transformer, lube oil system, control panels, synchronizer panel, UPS systems, operator monitors, MCC, start-up system, air compressors, HRCS for 10 bar steam, exhaust system, 6 kV vacuum breaker with synchronization, as well as all manuals and technical drawings. The plant remains installed, with electrical power still connected to all devices. All scheduled maintenance was performed by Wärtsilä Service, with the last maj ...

WEILER LZ330 / From educational institution incl. new 3-axis digital display -Turning diameter over bed 330mm -Turning diameter over support 165mm -Turning length 800mm -Speed range 25 - 2800 rpm -Automatic / longitudinal plan feeds -Multifix with 3x inserts -Drive power 3KW -Three-jaw chuck -Collet device with 20x collets -Copying device -Miscellaneous Accessories -Documentation Dimensions: LxWxH 1.8x0.7x1.6 meters / Weight 750Kg

Press company Walter SL 60t (beverage vending machine) 1991 Punching machine Peddinghaus 1997 Longitudinal seam welding machine Weil 2007 NC Milling Machine FP-4MA N/A Lid CNC Milling Machine DMC63-V N/A Lid Maho Automatic Circular Saw KKS 450 R 2008 Kaltenbach MAG welding machine Fronius Vario Star Unknown Fronius MAG welding machine Fronius Vario Star Unknown Fronius MAG welding machine Fronius Vario Synergic Unknown Fronius MAG welding machine Fronius Vario Star Unknown Fronius MAG welding machine Fronius Vario Synergic Unknown Fronius

Technical data: X-axis 2,000 mm Y-axis 2,500 mm Z-axis 1,250 mm W-axis 800 mm Spindle power 37 kW Spindle speed 1.6 – 1,500 rpm. Tool holder SK 50 Control CNC HEIDENHAIN TNC415 Table dimensions 1,800 x 1,600 mm max. table load 8 to B-axis 360° Weight approx. 30,000 kg Motor fan new Simodrive modules new 2024 November SK 50 Cone Reground 2024 New cover X axis in 2024 Y scale 2023 overtaken by Heidenhain