skoda w used for sale

The Waukesha Cherry-Burrell 015 is a rotary positive displacement pump which can handle dairy products (e.g., yoghurt, quark, curd and butter), solids (e.g., cherries and olives), slurries, pastes, and a variety of liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer continuous and intermittent reversible flows and can operate dry for brief periods of time. Flow is relatively independent of changes in process pressure to, so output is relatively constant and continuous. Duo - twin wing stainless steel lobes. Nominal displacement: 0,054 liter per revolution. Maximum nominal capacity: 2,0 m3/h. Inlet / Outlet connection: 1-1/2. Maximum product pressure: 13,8 bar. Maximum pump speed: 700 rpm. The pump is used in a ice cream factory for product pumping. The current motor with this pump is 0,75 kW - 1,395 rpm - 380/420 ...

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (18,5 kW), water valves (original Westfalia), all inlet/outlet pipes, service tools for maintenance and a several spare parts., Additional features:, Excluding:, - Base plate and feet., - Motor cover., - Control panel., Type of Machine: Cream Separator / Skimmer, Capacity: 10.000 liter per hour, Bowl speed: 5.920 rpm, Motor: 18,5 kW - 230/460 V - 60 Hz - 1.770 rpm - 59 / 29,5 A , Dimensions: 190 x 105 x 190 cm, Weight: 1.800 kg

sheet width: 1250 mm plate thickness: 1,5 mm distance between columns: 1300 mm daylight opening: 80 mm : 155 ° total power requirement: Handbetrieben weight of the machine ca.: 0,18 t dimensions of the machine ca.: 1,4 x 0,8 x 1,3 m Segment-bending machine Segment widths: 2x50mm,1x70mm,2x75mm, 2x100mm,4x150mm, 1x170m. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU230N087 MakeReko Industrial Equipment BV TypeInternally-fed drum screen TI-S 1200/1400 No.TZX0006/0001/S Year of construction2008 LocationBarneveld Main Features MaterialStainless steel Motor1.5 KW Length4000 mm Specified Features - Rotating sieve MaterialStainless steel Rotating sieveRotating drum sieve Sieve sizesdia. 1200x4000mm Motor1,5 KW, 230/400 Volt Sieve perforation3 and 4mm Information Floor space5,0x1,6 M Total height2,5 M Weight2000 KG Extra SpecificationsINTERNALLY FED DRUM SCREEN Separation of solids from waste and process water by means of an internally fed rotating perforated drum strainer. Rotating sievesRekoSieves > Rotating sievesBrand > Reko What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine ...

Coordinate measuring machine Manufacturer: Wenzel Type LH87 Year of construction 2022 X800 Y1000 Z700mm incl. an optical 3D measuring system Manufacturer: Zeiss Gom ATOS Q Machine and accessories are in very good TOP condition.

max. format 60 x 78 cm Year of construction 2008 PCS-G color remote control PDS-E Quality Control Ryobimatic Film Dampening Units Technotrans cooling unit RPC Semi-Automatic Plate Changing Automatic washing equipment Ultrasonic double sheet control Electrifying device Dry pollinator Grafix Digital Powder suction Stack delivery Reading totalizer: approx. 93 million pressure

BOD measurement OxiTop control 12 IR BOD meter with OC 100 WTW controller Operating temperature (metric): 5°C to 50°C For use with (app): For self-monitoring, 12 simultaneous measurements Included: OC 100 Controller Inductive stirring system IS 12 12 OxiTop-C measurement units with IR interface (infrared) Universal power supply 12 sample vials 12 rubber sleeves 12 Stirring Bars Container with measuring head Agitator

Wirtgen W500 asphalt milling machine, - Year of construction: 1998, - Working width: 500 mm, - Cutting depth: 160 mm, - Operating weight: 7000 kg, - Power: 79 kW, - Operating hours: approx. 6450 h, - swiveling and height-adjustable conveyor belt

BOD Measurement OxiTop IS-12 BOD Meter with WTW Induction Shaker Scale: 0 to 4000 mg/l 5-day data collector Automatic start as soon as the temperature reaches 20°C Operating temperature (metric): 5°C to 50°C Included: Inductive stirring system IS 12 12 OxiTop Units of Measure Universal power supply 12 sample vials 12 rubber sleeves 12 Stirring Bars Container with measuring head Agitator

Number of knives: Z2 V2 width: 17 mm circle diameter: 160 mm material: Stahl : WP Bore diameter: 40 mm Jointing rebate cutter Weinig type 530 160 01 / 2 08 for use on the planing spindle of Weinig planing machines. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ABB DCT880-W03-0160-04XA DC Drive 160A 110kW Inverter DCT880 DCT880-W03-0160-04 Item Condition: New (Other) The item is new, but may show traces of storage. Technical data: Type: DCT880-W03-0160-04 (3-leg, 3-phase) Rated current: 160 A Input voltage: 110-400 V AC, 3-phase Power: approx. 110 kW (at 400 V) Weight: ~16 kg Dimensions: approx. 370 × 271 × 270 mm Note: For detailed technical data and processing instructions, we strongly recommend that you consult the original data sheets or information directly from the manufacturer More items - new and used - can be found in our shop! International shipping costs on request! PD16

Ward Bekker Auger Filler Stainless frame, 25Kg stainless agitated hopper, 35mm diameter screw, with foot pedal, mobile, 3Ph

Pneumatic diaphragm pump with pressure multiplier. New equipment

An old segment cold circular saw Wagner Reutlingen is available. Series: 1, roller conveyor length: 4500mm, machine dimensions X/Y/Z: approx. 3000mm/1500mm/2300mm, weight: approx. 3000kg. An on-site inspection is possible.

Four-Way Planer Little Type Powermat 500 Technical data: - Planing width (mm): 230 - Planing height (mm): 140 - Waves: 6 1st Shaft: Down 2nd wave: right 3rd wave: left 4. Shaft: top 5. Shaft: top 6. Shaft: down - Spindle speed (rpm): 8000 - Total connected load (kW): 65 - Rated current (A): 142 - With planer heads Powerlock System - Program memory  - Soundproofing hood  - CE compliant 

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames.; Gross weight [kg]: 1760; Engine: Perkins 1106A-70TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 327

Tenoning spindle: 2 St. Number of milling agregates: 5 St. Spindle diameter: 50 mm SCM Windor 40 R window production centre, manufactured in 2006 -------------------------------------------------------- This machine is part of the sale of a complete window manufacturing operation, see stock number 1305-6979. Machines still connected and ready for demonstration Technical Summary: -------------------------------------------------------- - 2 long CNC-controlled slotting spindles - Optima 16: Drilling units for face and longitudinal drilling - ROTATEN: Angled window attachment - 3 long CNC-controlled profile spindles + top and bottom unit - Rebating carriage for small sashes - Workpiece return Options with additional costs: -------------------------------------------------------- - Used Leitz window and door tools for SCM Windor 40 R. Price: €10,000 - Separate OKOMA UF 3 rebating machine w ...

Tool holder MK 5 Speed range 20-1200 infinitely variable in 3 rows 1/min Feed rate 0.063-0.63 mm/min Projection 300-1250 mm, quill travel 355 mm Distance from spindle head to base plate 375-1375 mm Swivel range boom 360° Connected load 5 kW

Max. forming force: 80t, connected load: 3.5kW, current type: 3 phases, frequency: 50Hz, operating voltage: 380V, control voltage: 24V, rated current of the machine: 10A, rated current of the supply fuse fast-blow: 25A, slow-blow: 15A, weight: 1.79t. With documentation, without accessories or spare parts. Regularly maintained, machine has a defect, the speed adjustment no longer functions fully. An on-site inspection is possible.

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 3 kW Feed speed: 5-30 m/min. Weinig Powermat 500, year of manufacture 2010, window version ------------------------------------------------------- technical details short summary: -------------------------------------------------------- - 6 spindles, 5 of which are PowerLock - 8,000 rpm - Large PowerCom control system - Spindles 2, 3, and 4 axially CNC-controlled - Spindles 2, 3, 4, and 5 radially CNC-controlled - Window package for glazing bead removal: Pneumatic indexing of right and top spindles for bead removal See attached PDF document for detailed description Options with additional costs: -------------------------------------------------------- - Existing planing and molding tools by Leitz (price on request!) - Maweg Saturn Duo single-slot wood sander, manufactur ...

grinding length: 4000 mm grinding width: 1450 mm workpiece height: 1250 mm control: Siemens 840 D workpiece weight: 11000 kg column daylight: 1460 mm table surface area: 4000 x 1250 mm table feed: 1 - 45 m/min cross rail - adjustment: 1250 mm total power requirement: 40 kW dimensions of the machine ca.: 12,3 x 6 x 4,8 m Equipment/Accessories: - 1 universal grinding support, 7.5 kW Swivel range grinding spindle +/- 110° grinding disc dimensions Ø 500 x 60 mm Vertical adjustment 350 mm with puller - 1 peripheral grinding support, 22.5 kW Grinding wheel dimension Ø 600 x 100 mm Vertical adjustment 150 mm with puller - with 6 magnetic plates arranged on the table - seperate clamping table - various grinding wheels and flanges - Technical documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GENERAL Project No.: 905713 Quantity: 1 pcs. Manufacturer: GEORG RENDER Type: W 90 TH4 WSKAT PLC Control: Siemens SIMATIC HMI Year of Make: 2017 Condition: Used machine PARTS CLEANING Cleaning medium: Water-based Front loader Max. weight per load 120 kg GENERAL TECHNICAL DATA Total power requirement 26 kVA Machine weight approx. 750 kg NOTE We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. We therefore ask you to consider the description as non-binding and to check the data in detail during an inspection.

WTW inoLab Oxi 7310 Benchtop Oximeter With CELLOX 325 oxygen sensor OD Accuracy: ±0.5% OD Concentration: 0.00 - 20.00 / 0 - 90 mg/L Dissolved oxygen - saturation: 0.0 - 200.0 / 0 - 600% (±0.5%) Dissolved Oxygen - Barometric Pressure Range: 0 - 200.0 hPa / 0 - 1250 hPa Temperature range: 0.0...+50.0 °C Temperature accuracy: ±0.1°C Power supply: Universal power supply, 4×1.5 V AA batteries or 4×1.2 V NiMH rechargeable battery Data Acquisition - Capacity: 500 in manual mode/5000 in automatic mode In good condition

Description Compressor Worthington Rollair RLR 750 BM 6 500 T with Hankison refrigeration air dryer with approx. 28,000 operating hours Fully automatic, internally completely piped and wired compact system, single-stage oil-injected compression, air-cooled, soundproofed Operating pressure 10 bar Volume flow 40 m3/hour Output 5.5 KW Boiler 500 litres ROLLAIR_550_2000_EN

End mill, end mill, cutter, shell cutter, milling head, angle cutter, shell angle cutter, angle end mill -Manufacturer: Greiner, Angle end mill, cylindrical end mill, 2 pieces -Type: W242 Ø60x16xØ22 / Ø48x16xØ22 -Hole: Ø 22 mm -Price/Fee: complete -Transport dimensions: 110/60/H30 mm -Weight: 0.5 kg

Description Special machine construction based on a KM 500 feeder automatic mobile feeder for paper / cardboard – small format Year of construction 2017 Working width max. 50×60 cm Working width min 13×32 cm Flat pile feeder Stacking height approx. 70cm The cardboard in the picture is 2.2mm thick. With a max. format of 50x60cm, 600g/m² should not be a problem Mechanically + electrically overhauled, control self-made with Siemens components vacuum pump new, light barriers new, conveyor belts new etc No CE marking!

General SKU049Z226 MakeGlatt AG Pratteln TypeWST-CD 120/200 No.101015 Year of construction1991 LocationBarneveld Main Features MaterialStainless steel Volume500 Ltr. Specified Features - Fluid bed dryer batch Fluidbeddryer(1x) With pancheck Capacity500 Ltr Pan sizesdia. 1200x550mm, Pan with rotating bowl-mesh Capacity120-300 KG per batch Can be heated by steamcheck Without fancheck With dust filterAir Handler Unit MaterialStainless steel 1.4401 (316) Information With switchgearcheck Total height7,5 M Extra Specifications- With product discharge silo - With rotary valve for discharging and dosing - With CIP cleaning unit Technical specs Extra informationPan with rotating bowl-meshDiscountFluid bed dryers batchGlattDiscountDryers > Fluid bed dryers batchBrand > Glatt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared  ...

Offered is a WrapAroundPacker 420 / Combiline. Application area: Packaging of individual containers, Cycle rate max: 50cycles/minute, Format flexibility: 0.33l, 0.5l, Preserving jars, Adhesive system: Spot or line hot melt application system, Inspection by appointment possible.

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames.; Gross weight [kg]: 454; Engine: Perkins 404D-22G; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 66

workpiece diameter: 5 - 1.000 mm module range: 0,2 - 25 helix angle: < 90 ° Control: Wenzel GearTec faceplate diameter: 750 mm x-axis: 1.200 mm y-axis: 550 mm z-axis: 1.000 mm total power requirement: 6,5 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 3,30 x 3,15 x 2,70 m Software: BMain, FPDFPPostAction, GrafTool, TAlign, TAnalyse, TApplication, TCali, TCut_INPUT, TCut_MEAS_EVAL, TGear_INPUT, TGear_MEAS_EVAL, THob_INPUT, THob_MEAS_EVAL, TMesblatt, TPlot, TRoot_INPUT, TShaft_INPUT, TShaft_MEAS_EVAL, TStat, TStylus, WMI, wingeco. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

gear hobbing diameter - external: 1200 mm gear hobbing diameter - internal: 1200 mm gear hobbing width -max.: 260 mm max. workpiece diameter: 1500 mm Control: Siemens 840 D table diameter: 900 mm Table hole Diameter / depth: 320 / 520 mm max. table load: 95 kN coolant pump: 120 l/min Axial distance between thrust spindle - table: 0-820 mm work-spindle diameter: 125 mm tool taper: SK 45 DIN Table rpm: 12 1/min power requirement: 30 kW weight of the machine ca.: 24 t dimensions of the machine ca.: 11,715 x 5,565 x 4,505 m Strokes: - Stroke length min./max.: 0 mm / 270 mm - Stroke length adjustment range: 270 mm - Stroke rate (double strokes): 10 to 270 strokes/min Sliding head carriage: - Max. travel speed: 5000 mm/min Machine bed: - Axial travel: 600 mm Slotting head: - Max. module for rolling slotting: 16 mm - Slotting spindle diameter: 125 mm - Max. tool diameter: 30 ...

Number of boring spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2.000 mm Feed motor: kW Planing and moulder Weinig Profimat 23 for four-sided planing and profiling of timber incl. a set of planing heads. Including dismantling and loading. Fixed loading date: 15.06.2026. Spindle 1: Bottom Spindle 2: Right Spindle 3: Left Spindle 4: Top Spindle 5: Bottom The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU004Y029 MakeSeitz TypeEF 100/500 CW No.8402 Year of construction1969 Mounted on legscheck Pressure Working pressure3 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Surface0.8 m2 Specified Features - Nutsche filter Nutsche filtercheck Filter surface0,75 m² Capacity580 l Plate sizesø 980 mm Top connectionscheck Liquid outletDN50 With jacketcheck Max. temperature165°C MaterialStainless steel 1.4571 (316Ti) Information LocationBarneveld Floorspace1,5x1,5 M Total height2,1 MDiscountNutsche filtersSeitz - WerkeDiscountFilters > Nutsche filtersBrand > Seitz - Werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many mor ...

General SKU268N283 MakeWilhelm Schmidt TypeGEV 1000 No.94.0119 Year of construction2006 LocationBarneveld Pressure Working pressure1 Bar Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume1120 Ltr. Pressure1 Bar Specified Features - Pressure vessel MaterialStainless steel Capacity1120 Ltr Vessel sizesdia. 1200mm x1300 mm Dished topcheck Dished bottomcheck Max. temperature-60/50 degr.C. Information Floorspace2,6 x 1,4 M Total height1,8 M Weight400 KG Extra Specificationswith collectbinPressure vesselsWilhelm SchmidtTanks > Pressure vesselsBrand > Wilhelm Schmidt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machin ...

Window patch machine Heiber & Schroeder, Year 1986, Model: WP 1

Manufacturer: LOWA Model: Capping machine WK12-17 Year of Manufacture: 2025 Type of Machine : Bottle filling and capping machine Condition : New

Wook IL Automatic Flatbed Punch WTNS-SSF 2500, Max. size: 2500 x 1500 mm, Maximum speed 1600 arcs/hour, Max. punching force 600t, 400V, 50Hz, Year of manufacture 2008, Prefeeder, fully automatic, RF technology, MFS 2500 HBL, Model 2516, Max. sheet format 2500 x 1650mm, Min. sheet format 600 x 450mm, Maximum speed 13200 arcs/h, Max. stack height 2400mm (min. 500mm), Maximum stacking weight 2000kg, 400V, 50Hz, Year of manufacture 2011

Gutmann + Weyand Filling Machine Gastronomy/Bakery - Manufacturer: Gutmann + Weyand - Operating mode: pneumatic / manual - Suitable for: jams, creams, sauces, doughs and much more - Precise dosage adjustable

Dough section and crier WP Multimatik MUS - Manufacturer: Werner & Pfleiderer Lebensmitteltechnik - Type: MUS - 4-row - Year of construction: 2005

Excellent condition - Fully operational - Loading / Transport possible! VENTURE 08M CNC - controlled machining center in moving gantry design travels of the axes: X = 3930 mm Y = 1953 mm Z = 300 mm working table: X = 3100 mm (length) Y = 1250 mm (width) Z = 100 mm (thickness) 50 mm (passage height without vacuum cups) CONFIGURATION: V12, H4X/2Y, N1 X-Y 90°, F1-HSK63-9KW, C-AXIS, W8 REAR, W8 SIDE V12 HIGH SPEED 7500 incl. quick change system and spindle clamping Vertical drilling unit (individually controllable with variable speed range). Spindle clamping for safe achievement of drilling depth. F1-HSK63-9 KW Automatic tool change spindle in combination with lateral tool change magazine. Tool holder: HSK63 Tool retraction: automatic Direction of rotation: right/left Speed: 1,250 - 24,000 1/min infinitely programmable C-AXIS AGGREGATE INTERFACE W8 REAR Automatic tool change  ...

Industrial steam boiler LOOS U-HD-1600 in excellent condition for sale. With full documentation with Weishaupt G7/1-D gas burner Manufacturer: LOOS Gunzenhausen Type: U-HD 1600 Year of manufacture: 1993 Full inspection: 2017 Boiler capacity max.: 1600 kg/h Operating pressure: 10 bar Fire output: 1186 kW Gas burner: Weishaupt G7/1-D 300-1750kw Water capacity: 1740 liters Total heating surface: 31 m² Test pressure: 18 bar Increased test pressure: 18 bar Year of manufacture: 1993 Full documentation! length: 4 meters (including gas burner) Width: 2.2 meters Ijbmrcjym Tugs Ipnstf Height: 2.3 meters Weight: 4200kg ca

For sale is a high-quality lead and pull spindle lathe from the renowned German manufacturer Weiler, model Condor VS 1. The machine convinces with its high precision, robust construction and durability and is in a very well-maintained and technically perfect condition. Ideally suited for the workshop, single part production and precise turning work. General information: Machine Type: Lead and Pull Spindle Lathe Manufacturer: Weiler Model: Condor VS 1 Year of construction: approx. 1977 Condition: Well maintained, technically perfect Availability: Immediately available Technical data: Max. turning diameter over bed: approx. Ø 330 mm Max. turning diameter via support: approx. Ø 170 mm Max. turning length: approx. 800 mm Bar passage: approx. Ø 38 mm Spindle: Speed range: approx. 24 – 2,800 rpm Feed & Thread: Feed range: approx. 0.037 – 1.253 mm/rev  ...

Excellent condition - Fully operational - Loading / Transport possible! machining dimension X: 2,500 mm Machining dimension Y: 1,300 mm Machining dimension Z: 4 - 80 mm Number of milling units. 2 Number of drilling units: 2 Drilling spindles vertical: 72 Drilling spindles horizontal X: 16 Drilling spindles horizontal Y: 4 Hedp Ez Afsh E Sghjdsk Grooving saw: 90° tiltable speed X-axis: 130 m/min speed Y-axis: 80 m/min speed Z1-axis: 50 m/min speed Z2 axis: 27 m/min Speed: 18,000 rpm

Waldner Dosomat 16, rotary, 6-head filling machine for aseptic filling of cups. Capacity: up to approx. 9.000 cups/hour. 3x Format sets: round 95 mm, square 65x65 mm and square 95x95 mm. Format change in the shortest possible time by the tool-free exchange of quick-change format plates, push-in cup destackers and lid magazines allow immediate response to the daily market requirements and to the realisation of strategic decisions in terms of cup design changes., Working principle:, - Automatic cup de-stacking storage buffer magazine for ± 15 minutes buffer (preformed cups)., - Cup de-stacking station., - Cup sterilisation using H2O2 and hot sterile air. All the necessary valves and lines are situated in a sterile module next to the machine. The cups passing through it are subjected to sterile air enriched with H2O2 and then finally dried with hot sterile air. In this way, especially moul ...

A Timesavers (Grindingmaster) wide belt grinding machine with two upper wide belt grinding units and one brushing unit is available. Contact roller diameter: 180mm/280mm, grinding belt accuracy: 0.01mm, brushing unit outer diameter: 300mm, brush oscillation: 150strokes/min, brush motor speed range: 8m-22m/s, table height adjustment: 1mm-100mm, grinding belt dimensions X/Y: 1630mm/2620mm. Machine dimensions X/Y/Z: approx. 4300mm/2650mm/2650mm, weight: approx. 5500kg, control: Siemens PLC. Including one IEP nanofilter cartridge extraction system. Documentation vorhanden. An on-site inspection is possible.

Manufacturer: Warcom Model: Logica 100-2500 Year of Manufacture: 2023 Type of Machine : CNC Press Brake CE certified Overall working hours: 3,299 Pump working hours: 1,549 Rammer working hours: 140 Rammer strokes: 112,717 Find more here - / Contact us at -

Excellent condition - Fully operational - Loading / Transport possible! Working width 13 to 230 mm Working height 6 to 120 mm Number of spindles 4 Motor power of dressing spindle 4 to 7.5 kW Motor power of vertical spindles 5.5 to 11 kW Motor power of upper spindle 4 to 11 kW Feeder motor power 1.5 kW Diameter of spindles 40 mm Tool flight circles of throat spindles 125 to 200 mm Adjustment range of spindles axial 30 mm Adjustment range of dressing spindle 5 mm Feed rate 8 m per minute Diameter of feed rollers 140 mm Width of feed rollers 2 x 50 mm Width of roller in outfeed table 50 mm Adjustment range for dressing table and ironing ruler 10 mm Height of right stops 60 mm Length of dressing table 2000 mm