skoda lathe used for sale

Offered is a conventional lathe. Center height: 190mm, swing diameter over bed: 380mm, speed range: 27-1000rpm, speed stages: 12, thread types: metric, Whitworth, module, feeds: Norton gearbox, spindle mount: bayonet, operation: manual, control system: manual. Equipped with 3-jaw chuck, chuck guard with safety screen, four-position tool holder, lead and feed screw cover. Weight: approx. 1200kg, overall dimensions X/Y/Z: approx. 2000mm/1000mm/1300mm. Inspection possible by arrangement.

Control system: Philips B2T, machine currently not operational, partially dismantled, the fan of the main spindle motor has been completely renewed, the main drive and the mechanical assemblies (headstock, turret, ball screw) are intact, the Z-axis motor is defective and has already been professionally removed, the hydraulic clamping cylinder requires repair or must be replaced. An on-site inspection is possible.

Motorized turret, self-centering collet holder, tailstock, manuals present Auction-ID: A7-47195-32

-Hamlet -E50/1 -No.: 474 -Year: 1996 -Operating hours: approx. 22,400 -Voest-Alpine Steinel control (whereby the control is probably via sep. desktop PC) -Incl. chip conveyor, various tool holders and tools Shipping available on request. Sale only to tradespeople. Indicated purchase price = Net plus 19% VAT = €9,282.00 Gross

With chip conveyor, manuals present Auction-ID: A7-47195-43

-Guild Master -N.E.F. CT40 -No.: 09213 -Year: probably around 1985 -Operating hours: approx. 27,500 -incl. chip conveyor -incl. workshop cabinet with contents for Gildemeister NEF CT40 --> Metal construction, color: green with black handle strips, 7 drawers, contents: lathe steels, carbide plates, jig etc. Shipping available on request. Sale only to tradespeople. Stated purchase price = net plus 19% VAT = €4,998.00 gross

Spindle diameter 255 mm SMW autoblok 250 BB  12-place motorized turret tailstock and bezel Auction-ID: A7-47195-38

Maximum Turning Diameter: 390 mm Maximum Turning Length (L Version): 680 mm Self-centering diameter: 250 mm (10\") Bar Passage (Version C): 76 mm Spindle Speed: Up to 3,500 rpm (high torque) Spindle nose mount: A2-8 Total Machine Weight: Approx. 5,200 kg Floor Dimensions (W x D): Approx. 3,350 x 1,700 mm Maximum Height: 1,900 mm Auction-ID: A7-47195-5

For sale Doosan Multi Task CNC turning center type MX2100LST with a Fanuc 31i-A controller. This Doosan MX2100LST is a high-quality, multifunctional 9-axis CNC turning/milling center. The machine combines the functions of a CNC turning and machining centre in a single clamping (turning-milling). Capacity & Working Area Maximum turning diameter: 540 mm Maximum turning length: 1,540 mm Maximum diameter over bed: 750 mm Maximum diameter over thrust axis: 650 mm Spindles (main and counter spindle) Both spindles offer identical performance and thus enable the symmetrical transfer and machining of workpieces: Lift Plate Size: 8 inches (optional 10 inches) Maximum speed: 5,000 rpm Spindle motor power: 22 kW Spindle bore / Maximum rod diameter: 65 mm. C-axis resolution: 0.001 degrees (on both spindles) Milling spindle (B-axis head) The upper processing head is a fully controll ...

Voltage: 380V, current consumption: 125/118A, control system: Philips B2T 6, equipment: hydraulically actuated turret vorhanden, enclosed working area with slant bed geometry, hydraulic clamping system, piping, condition: fully functional, very good mechanical condition, visually well maintained, partially overhauled, tool turret: angular position encoder completely renewed, turret indexes absolutely faultlessly and precisely according to the data sheet, CNC control system: power supply professionally overhauled, main spindle drive: power section/drive completely overhauled, with power chuck and base jaws. An on-site inspection is possible.

Interface: RS232C, connected load: 21kVA, control system: Okuma OSP 5000 L-G, length: 2900mm, width: 1800mm, height: 1720mm, weight: 4.5t, ball screw of the X-axis has 0.2mm backlash, regularly maintained, with chip conveyor. An on-site inspection is possible.

Tool monitoring, thread cutting without compensating chuck, main spindle: spindle bore: 36mm, max. speed: 6300rpm, drive power: AC 6.7/10.7kW, C-axis, Hainbuch change parts, installation aid base body, Hainbuch manual changing device, counter spindle: counter spindle as motor spindle, C-axis, device for counter clamping pressure, workpiece ejector device, Hainbuch Axfix chuck, upper tool carrier, driven tools, electronic gearbox, X3 cross axis for front attachment, 5-position front attachment and cut-off side machining station with driven tools, machine and control cabinet RAL 7037 (dust grey), covers RAL 7035 (light grey), workpiece discharge device: workpiece gripper, gripper jaws D5-8, D8-20, D20-36, coolant lubrication system: tank 230l/7bar/50l/min, internal coolant supply 30bar, high pressure 120bar at the front and rear machining station, Knoll VRF 150/750 vacuum rotary filter (su ...

Tool changer turret, material ejection, control unit with analogue counting unit, bar feeder in front, L = approx. 3,000 mm,

Center width approx. 800 mm, center height approx. 150 mm, clamping bush, tool change turret, manual tailstock, power 4.0 kW,

Code: 0396 Brand: EINHELL Model: TC - WW 1000 Wood lathe Technical specifications: Power supply 220 Volt Centre distance 1000 mm Turning diameter 280 mm Motor power 350 W N° 4 speeds (890/1260/1760/2600 rpm) Backing pad Tailstock Overall dimensions mm 1500 x 200 x 350 h Weight kg 23

Schuster VTM 350 Year of manufacture 2005 see pdf on the for specifictions The machine is in working, good condition The 2005 Schuster VTM 350 is a vertical turning lathe designed for precision machining of medium-sized components. This machine integrates advanced features to enhance productivity and accuracy in various industrial applications. Key Specifications: - Maximum Turning Diameter: 200 mm - Maximum Workpiece Height: 350 mm - X-Axis Travel: 200 mm - Z-Axis Travel: 400 mm - Spindle Speed: Up to 8,000 rpm - Tool Turrets: Two turrets, each accommodating 12 tools - Spindle Motor Power: 20 kW - Machine Dimensions (L x W x H): 3,000 mm x 1,700 mm x 3,350 mm - Machine Weight: Approximately 6,000 kg Features: - CNC Control System: Equipped with the Rexroth Indramat System 200 BTV 20, providing precise control over machining operations. - Stepless Feed Rates: Allows feed rates up ...

Futureline 650 2004 Stama MC 021 + Fanuc Robodrill Year of manufacture 09/2004 The machine is in working, good condition The 2004 Stama MC 021 is a vertical machining center equipped with a Fanuc Robodrill system, designed for high-speed, precision milling and drilling operations. This machine is integrated into the Schuster Futureline 650 production line, enhancing its automation capabilities for efficient manufacturing processes. Key Specifications: - Model: Stama MC 021 - Year of Manufacture: 2004 - Control System: Fanuc 16i-MB CNC - Axis Travels: - X-axis: 500 mm - Y-axis: 400 mm - Z-axis: 330 mm - Table Dimensions: 650 mm x 400 mm - Maximum Table Load: 250 kg - Spindle: - Taper: SK 30 - Speed: Up to 20,000 rpm - Motor Power: 7.5 kW - Tool Magazine Capacity: 21 tools - Additional Features: - Integrated chip conveyor - Cooling through spindle (IKZ) - Optional NC dividing head for ...

Working range Center distance: 1,500 mm Travel over bed: 570 mm Travel over cross slide: 340 mm Cross slide travel: 290 mm Bed width: 350 mm Spindle Spindle head DIN 55027 size 8 Spindle bore: 93 mm Speed range: 1–3,000 rpm Main drive: 20 kW AC motor Tailstock Quill diameter: 90 mm Quill stroke: 180 mm Mounting: MK 6 Feed Feed force X: 7,000 N Feed force Z: 10,000 N Rapid traverse X: 7 m/min Rapid traverse Z: 10 m/min Machine Weight: approx. 3.6–3.9 t Dimensions: approx. 3,300 × 1,800 × 1,900 mm Equipment Heidenhain Manual Plus cycle control Heidenhain AC servo drives ZF two-speed gearbox (electrically switched) 3-jaw wedge bar chuck Ø250 mm Face plate Ø500 mm Fixed steady rest Tailstock with live center Multifix tool holder Parat 4-station turret Reinforced coolant pump Machine feet Accessories Multifix tool holder package Various turning holders Measuring equip ...

Parallel Lathe COLCHESTER type MASTIFF 1400 Between points: 2000 mm Maxi Ø on bench: Ø 535 mm Maxi Ø over saddle: Ø 380 mm Maxi diameter in brocken bed: Ø 815 mm Spindle diameter: Ø 90 mm Spindle speed: from 18 to 1400 RPM 3-jaws chuck Ø 310 mm Year of construction: 1985 Threadings: Metric + Whitworth 3 points Fixed Steady Tailstock: CM5 Scale: 2 axes NEWALL Square turret GOODSHAPE Accessories: 3 tool holders + few sets of jaws Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3600 x 1500 x 1700 mm Weight: approx 3 T

MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindl ...

Manufacturer: Traub Model: TNK 36 Year of Manufacture: 2003 Operating Hours: approx. 124,705 h (as of May 2026) Total Connected Power: 33 kW Voltage: 400 V / 50 Hz Condition: No known defects. Available for live demonstration. CNC Control - Control: TX8i (64-bit) - Screen: 10.4 inch flat panel display - Interface: V24 RS232 in control cabinet - MDE Interface: Machine running / piece counter - Tool monitoring included - Thread cutting without compensation chuck - Programming: At machine control or via WinFlex IPS software on PC Main Spindle - Spindle Bar Capacity: 36 mm - Max. Speed: 6,300 rpm - Drive Power: AC 6.7 / 10.7 kW - C-axis included - Hainbuch collet chuck system (manual change device included) Counter Spindle - Motor spindle with C-axis - Counter-clamping pressure device - Workpiece ejector - Hainbuch Axfix collet chuck - Upper tool carrier with driven tools and ele ...

swing diameter: 2200 mm centre distance: 9500 mm turning diameter over bed: . mm turning diameter over slide rest: . mm turning length: . mm workpiece weight: 70 t turning speeds: . U/min 4-jaw-chuck diameter: 2100 mm control: Siemens type: Sinumerik 850 T mm transmission ratio: . total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: m Single Carriage Tailstock Hydrostatic Bed Chip Conveyor Serial Number: 27486 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find  ...

Travis TR-2 CNC lathe manufactured in 2006. Equipped with Fagor 8055T CNC control, hydraulic plate and 8-position tool turret. Technical characteristics: • Distance between points: 1,850 mm • Flip on bed: 630 mm • Trolley tipping: 400 mm • Maximum spindle speed: 2,500 rpm • 300 mm hydraulic chuck • 8-position turret • Tailstock included • Centralized automatic lubrication system The machine is supplied with various tool holders, turning tools and accessories visible in the photographs. Suitable for precision turning work and general metal machining. Used status. Sold in the condition it is in. Auction-ID: A7-47240-5

Centre height: 350mm, turning diameter: 700mm, spindle bore: 108mm, spindle speed: 13-1,000rpm. An on-site inspection is possible.

Fresh oil lubrication capacity: approx. 3l, voltage: 400V, frequency: 50Hz, fuse protection (slow-blow) according to VDE 0100: 80A, permissible voltage fluctuation at 400V: ±10%, connected load: 44kVA, length: 3210mm, width: 1750mm, height: 1750mm, weight: approx. 4.6t, with chip conveyor. An on-site inspection is possible.

Gildemeister GMX 250S Linear Turning/Milling Center CNC Cover Maho DMG Hersteller [manufacturer]: Gildemeister Deckel Maho DMG Type [ type]: GMX 250S Linear Control [control unit]: Heidenhain Plus IT 3D CNC Pliot 4290 plus it Baujahr[construction year]: 12/2008 the premier class of turning and milling! Important key data of the GMX 250S Linear: • 7 Axis Turn-Mill Center • Main and counter spindle • B-axis up to 240° • Milling spindle up to 12,000 rpm • Tool magazine up to 80 places • Siemens 840D or Heidenhain control • Linear actuators for high dynamics and accuracy • Machining diameter approx. 520–640 mm • Turning length up to approx. 1,185 mm Typical equipment: • Y-axis • Powered tools • Bar feeder • High-pressure cooling • Probes • Chip conveyor • HSK-A63 milling spindle • Sub-spindle for complete machinin ...

Voltage: 380V, frequency: 50Hz, spindle power: 10hp continuous, 15hp for 30 minutes, amperage of largest motor: 40/60A, KA. DC gradation: 10, control: Mazak MAZATROL T-1, weight: 4.5t, with programming manual. An inspection on site is possible.

Heavy Duty Lathe Seiger SLZ 1200 x 3000 with Siemens Sinumerik 810D Cycle Control (Teach-In) The heavy duty lathe Seiger SLZ 1200 x 3000 is equipped with a Siemens Sinumerik 810D cycle control (Teach-In). The machine was most recently used as a faceplate and frontal lathe and therefore operated without a tailstock and without steady rests . However, the machine can still be structurally equipped with appropriate steady rests or a tailstock and used for classic center work. Configuration with AC main drive, large faceplate, hydraulic unit, separate control cabinet, and 2 chip conveyors . Working Area Distance between centers: 3,000 mm Swing diameter over bed: 1,200 mm Swing diameter over cross slide: 850 mm Cross slide travel: 620 mm Bed width: 750 mm Spindle Spindle nose: DIN 55027 size 11 Spindle diameter front bearing: 190 mm Spindle bore: 104 mm Speed range: 5 – 900 ...

Lathe accessories in 5 hinged door metal cabinets FÖRCH, blue, each approx. 90x200h cm, complete with contents

Two Schütte six-spindle turning machines including one Iemca bar feeder are available. 1) Schütte SF 42, year of manufacture: 1977, number of spindles: 6, max. bar capacity: 42mm, max. longitudinal slide stroke: 125mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 6500mm/1400mm/2200mm, weight: approx. 10000kg. Including pick-off spindle, cams, collets, chip conveyor, oil mist extraction system and Iemca PRA40/33/P bar feeder. 2) Schütte SF 51 DNT, year of manufacture: 1987, max. bar capacity: 51mm, number of spindles: 6, max. turning length: 102mm, max. drilling depth: 102mm, spindle circle diameter: 340mm. Including pick-off spindle, CNC cross slide in position 4, cams, collets, auxiliary coolant pump and chip conveyor. Documentation available. An on-site inspection is possible.

Manufacturer: Feinbau Model: VDZ 80 DS Year of Manufacture: 2008 Voltage: 400 V Frequency: 50 Hz Pre-fuse: 125 A Power Requirement: 55 kW Weight: 10,000 kg Includes: Robot loading system Find more here - / Contact us at -

For sale: Hyundai-Kia cnc lathe type SKT300MS. This machine is equipped with a Fanuc 21i TB control. De machine has a main and sub spindle. The chuck size on the subspindle is 300 mm with a bar capacity from 90 mm. The chuck size on the sub spindle is 8 inch (210 mm). Maximum turning diameter is 500mm, maximum turning length is 680 mm. The machine is equipped with a 12 position revolver with BMT-65 toolholders. All toolholders are included. Inclusive 4 pieces rotary toolholders. The machine has a toolsetter,parts catcher and a chip conveyor with right side discharge. On stock for sale

Manufacturer: Maier Model: MLK 32 DS Machine Type: CNC Swiss-Type Long-Turning Lathe Year of Manufacture: 2019 Machining Length: up to 4000 mm Bar Diameter Capacity: up to 32 mm Weight: 4200 kg Rated Voltage: 400 V Operating Voltage: 230 V Control Voltage: 24 V Total Rated Current: 93.3 A Total Rated Power: 52 kW Certification: CE Includes: Existing tooling, clamping devices and accessories Find more here - / Contact us at -

lathe, year 2003, CNC Fanuc 16i-TB. Used machine in good condition. More info & price on IndustrialBuyer.

lathe, year 1999, CNC OSP-U100L. Used machine in good condition. More info & price on IndustrialBuyer.

lathe, year 2016, CNC 31i-B5. Used machine in good condition. More info & price on IndustrialBuyer.

lathe, year 1998, CNC series 16-T. Used machine in good condition. More info & price on IndustrialBuyer.

lathe, year 2014, CNC 16i-TA. Used machine in good condition. More info & price on IndustrialBuyer.

lathe, year 1998, CNC MSC-501. Used machine in good condition. More info & price on IndustrialBuyer.

lathe, year 1998, CNC 16-T. Used machine in good condition. More info & price on IndustrialBuyer.

lathe, year 2006, CNC 21i-TB. Used machine in good condition. More info & price on IndustrialBuyer.

lathe, year 2001. Used machine in good condition. More info & price on IndustrialBuyer.

lathe, year 2010, CNC MSX-701 III (Fanuc 31i-T). Used machine in good condition. More info & price on IndustrialBuyer.

lathe, year 2006. Used machine in good condition. More info & price on IndustrialBuyer.

lathe, year 2010, CNC 840D ShopTurn. Used machine in good condition. More info & price on IndustrialBuyer.

lathe, year 2001, CNC 21iT. Used machine in good condition. More info & price on IndustrialBuyer.

lathe, year 2013, CNC 18i - TB. Used machine in good condition. More info & price on IndustrialBuyer.

lathe, year 1998, CNC 21i-T. Used machine in good condition. More info & price on IndustrialBuyer.

lathe, year 2003, CNC Series 18i-T. Used machine in good condition. More info & price on IndustrialBuyer.

lathe, year 2005, CNC 18i-TB. Used machine in good condition. More info & price on IndustrialBuyer.