skoda lathe used for sale

Manufacturer: HK-CON Model: L2SDZ-6 SUS-090 Type of Machine : Lathe Find more here - / Contact us at -

General CNC slant bed lathe Traub is available. Tool stations: 12, tool holder: VDI40, turning diameter: 180mm, max. swing diameter: 450mm, max. turning length: 490mm, bar capacity: 60mm, travel X/Z: 160mm/490mm, rapid traverse: 15m/min, feed rate: 10m/min, machine dimensions X/Y/Z: approx. 3100mm/2000mm/1800mm, weight: approx. 4250kg, control: Traub System TX-8. An on-site inspection is possible.

Manufacturer:TRAUB Model: TNX 80/65 Year of Manufacture: 2008 Type of Machine : CNC Lathe Total Power Requirement: 95 kW Voltage: 400 V, 50 Hz Machine Weight: approx. 14,000 kg Machine Dimensions (L x W x H): approx. 5.5 m x 7.8 m x 2.52 m Floor Space Required: approx. 5.5 m x 7.8 m Spindle Specifications - Spindle head DIN 55026: HSP A8 / GSP A6 - Spindle bore diameter: 65 mm - Maximum spindle speed: 4,300 min-1 (HSP) / 5,000 min-1 (GSP) - Main spindle motor output: 25.2 / 30.2 kW - Counter spindle motor output: 17 / 21.5 kW Turret System - Turret positions: 4 turrets (positions 1, 2, 3 and 4) - Turret stroke X-axis: 170 mm - Turret stroke Y-axis: plus/minus 60 mm - Turret stroke Z-axis: 600 / 500 / 950 mm - Number of driven tools per turret: up to 10 - Vertical tool holders DIN 69880: 40 x 63 mm Linear Tool Carrier - B-axis: swivelling - Number of driven tools: 2x2 / 2x2( ...

Manufacturer: TRAUB Model: TNX 80/65 Year of Manufacture: 2005 Type of Machine : CNC Lathe Total Power Requirement: 95 kW Voltage: 400 V, 50 Hz Machine Weight: approx. 14,000 kg Machine Dimensions (L x W x H): approx. 5.5 m x 7.8 m x 2.52 m Floor Space Required: approx. 5.5 m x 7.8 m Spindle Specifications - Spindle head DIN 55026: HSP A8 / GSP A6 - Spindle bore diameter: 65 mm - Maximum spindle speed HSP: 5,000 min-1 - Maximum spindle speed GSP: 5,000 min-1 - Main spindle motor output: 25.2 / 30.2 kW - Counter spindle motor output: 17 / 21.5 kW Turret System - Turret positions: 4 turrets (positions 1, 2, 3 and 4) - Turret stroke X-axis: 170 mm - Turret stroke Y-axis: plus/minus 60 mm - Turret stroke Z-axis: 600 / 500 / 950 mm - Number of driven tools per turret: up to 10 - Vertical tool holders DIN 69880: 40 x 63 mm Linear Tool Carrier - B-axis: swivelling - Number of driv ...

Universal lathe with cycle control VDF Boehringer VDF 400 DUS Control: Siemens Sinumerik 840 Year of Make: 2014 Internal machine no. 57 Turning length: 1,000 mm Turning diameter over bed / face slide: 420 / 235 mm Displacement of face slides: 250 mm Max. speed: 10 – 3,000 rpm Accessories: - Bezel - Suction - 3- Jaw chuck Schunk 250-62 - Tool holder

Key data: 430 mm, 1400 mm

Guide and pull spindle 32 A 380V 12.5 KW Speeds 18 - 1400 rpm Spindle passage 90 mm Lamp 4-way quick coupler with 14 pick-ups 3 interchangeable jaw sets Röhm Jaw Chuck with 33 cm Bezel Length 1.10 m Width 3 m Height 1.40 m Weight 2.5 T

Manufacturer: Schaublin Model: 180-CCN Year of Manufacture: 1997 Spindle Hours: 10,753 h Machining Capacities - Max. turning diameter over the bed (with revolver only): 330 mm - Max. turning diameter over the cross slide: 160 mm - Max. admissible diameter over the bed: 430 mm - Spindle centre height over cross slide: 83 mm - Max. distance between centres: 650 mm - Max. workpiece weight - with spindle A2-5: 25 kg - Max. workpiece weight - with spindle A2-6: 35 kg Spindle - Spindle nose ISO: A2-5 or A2-6 - Collet chuck compatibility (Schaublin): B45 / F48 (A2-5) | F66 (A2-6) - Max. bar diameter with B45 collet: 36 mm - Max. bar diameter with F48 collet: 42 mm - Max. bar diameter with F66 collet: 60 mm - Auto collet chuck through bore - A2-5: 170 mm | A2-6: 210 mm - Collet clamping force at 5 bar - A2-5: 2700 daN | A2-6: 3400 daN - AC motor drive: 15 / 18.5 kW (100% / 50% DE) - Motor ...

Manufacturer: DMG Mori Seiki Model: NEF 400 V3 Driven tools: 6 cross-driven tools Control System: Heidenhain Manual Plus Year of Manufacture: 2013 Find more here - / Contact us at -

Key data: 280 mm, 400 mm

Technical data: Manufacturer: Spinner Type: TC 52 MC Year of Make: 2007 Control: Siemens 810D Shop Turn Travels: X 200 mm, Z 570 mm Switch-on hours: 4,364 h Turning diameter: max. 280 mm Circumferential diameter: max. 400 mm Main spindle Speed: 5,000 rpm Spindle passage: 52 mm Tools Revolver: 12-speed Tool holder: VDI 30 Number of driven tools: all Dimensions and weight Weight: approx. 3,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Chip conveyor Interface for bar feeders 3-jaw chuck

Manufacturer: Gildemeister Model: GMX 400 linear Year of Manufacture: 2007 Total Power Requirement: 100 kVA Voltage: 400 V Machine Weight: 24,000 kg Floor Space Required: 60 m2 Working Range - Centre height: 1,343 mm - Maximum turning diameter: 640 mm - Maximum turning length: 1,930 mm - Maximum turning length over bed: 550 / 180 mm - Slide travel longitudinal X1, X2: 1,585 / 1,400 / 1,500 mm - Slide travel vertical Y: plus/minus 110 mm - B-axis: plus/minus 120 degrees - Maximum circumference: 640 mm - Length of workpiece in crown area: not specified - Maximum workpiece weight: not specified Spindle Specifications - Spindle head flat flange DIN: Flachflansch - Spindle nose diameter front bearing: 220h5 mm - Spindle bore diameter: 107 mm - Spindle nose diameter: 150 mm - Max. chuck bore diameter in front bearing: 250 / 315 / 400 mm (internal taper) - Spindle speed HSP: 3,200 / 4 ...

CNC Swiss lathe GILDEMEISTER SPRINT 20/8 linear With Fanuc 31i controller Year of Make: 2016 Spindle bore: 20 mm MAIN SPINDLE Turning diameter: max. 20 mm Speed range : max. 10000 rpm Stroke Z1: 80 mm SUB-SPINDLE Turning diameter: max. 20 mm Stroke Z 2 : 300 mm Speed: max. 10000 rpm SLIDE 1 Stroke X 1: 50 mm Stroke Y 1: 350 mm 6 Pos. Tool Holder 12 x 12 5 rotating tools including spindles with clamp holder ESX 16 SLIDE 2 Stroke x 2 : 240 mm 4 position tool holder for external machining with connection 12 x 12 4 position tool holder for internal machining diameter 20 mm 5 rotating tools including spindles with clamp holder ESX 16 6 + 2 axes, 2 Y axes as standard Linear actuator for maximum precision With the following accessories: Full protection cab with interior lighting Various tool holders C axis for main and counter spindle Bar Feeder L ...

CNC Swiss lathe GILDEMEISTER SPRINT 20/8 With Fanuc 32i control Year of manufacture: 11/2019 Spindle bore: 20 mm MAIN SPINDLE Turning diameter: max. 20 mm Speed range : max. 10000 rpm Stroke Z1: 60 mm SUB-SPINDLE Turning diameter: max. 20 mm Stroke x 2 : 220 mm Stroke Z 2 : 170 mm Speed: max. 10000 rpm SLIDE 1 Stroke X 1: 50 mm Stroke Y 1: 325 mm SLIDE Y 2 Stroke Y 2 : 85 mm With the following accessories: Full protection cab with interior lighting Various tool holders Tool holder for slides 1-3 4 driven tools with 4 spindles with ESX/ER 16 holder C axis for main and counter spindle Y axis on carriage 1 – 2 2 cross slides Workpiece unloading conveyor Signal light 4 colour Fire extinguishing system Coolant device 165 l ( Pumping capacity 90 l/min 1 bar) THE MACHINE IS IN MINT CONDITION THE MACHINE HAS ONLY 110 PROGRAM RUNNING HOURS

turning diameter over bed: 3750 mm turning diameter over slide rest: 3250 mm turning length: 15000 mm centre distance: 15000 mm faceplate: 3000 mm workpiece weight: 120 t steady: + 15t Rest: 2 main drive: 119 kW spindle bore: 105 mm spindle turning speed range: 0,33 - 75 U/min feed in x - axis: 300 mm/min feed in y - axis: 150 mm/min tailstock quill diameter: 500 mm total power requirement: ca 140 kW weight of the machine ca.: - t dimensions of the machine ca.: - m - 2-Carriages - Face Plate 3000mm - 6-Steady Rests - 4-Way Bed Construction - Taper Attachment - Inch/Metric Threading - Tailstock With Live Center The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic lathe Genini ROTOUR 100 Max working length 300 mm Max turning diameter round Ø 140 mm, square 100×100 mm 15hp spindle motor Shank Speed 2050-2800-4100-5600rpm 3HP Pump Motor 0.5hp grinder motor Net price

turning diameter: 315 mm turning length: 1000 mm control: Siemens type: Sinumerik 802 D turning diameter over slide: 160 mm spindle hollow: 52 mm Tool changer: 12 turning speeds: 30-3300 U/min chip conveyor: total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: m Machine has been overhauled Die techn. Daten sind Hersteller- bzw. Betreiberangaben und daher für uns unverbindlich. Einen Zwischenverkauf behalten wir uns vor, es gelten ausschließlich unsere Geschäfts- und Verkaufsbedingungen. Über uns mehr als 400 eigene Maschinen im Lager über 15.000 m² Lagerfläche, Krankapazität 70 t mehr als 10.000 Artikel Zubehör für Ihre Werkstatt Sie wollen Maschinen Produktionslinien oder Ihren Betrieb verkaufen, dann sprechen Sie uns an. Weitere Angebote finden Sie auf unserer Webseite. Besichtigungen sind nach Absprache möglich. Wir freuen uns auf Ihre ...

1 L+Z lathe Make: VDF-Oerlikon Boehringer Model; DUE 560 Year of Make: 1986 Turning diameter over bed: 570 mm Turning length: 1000 mm Speed range: 11.2 - 2240 rpm Weight of the machine: 3.8 tons. Accessories / equipment: digital display, chip protection. Conveyor belt cover, Coolant device, rapid traverse.

Locatelli OMK300 + UF 150/220 automatic lathe Turning length 300mm Maximum Bracket 100x100mm Minimum Branch 20×20 Work after the copiers Drill transfer UF 150/220

Locatelli OMK300 + UF 150/220 automatic lathe Turning length 300mm Maximum Bracket 100x100mm Minimum Branch 20×20 Work after the copiers Drill transfer UF 150/220

Find more here - / Contact us at -

Hours in Picture The 2003 Weiler E50 is a "Cycle-Controlled" lathe, which sits in the sweet spot between a manual machine and a full-blown CNC. In 2003, this machine was the king of the "one-off" and small-batch production world. Find more here - / Contact us at -

Manufacturer: Emco and Padovani Model : EMCOMAT-E200/1000 Year of manufacture: 2001 CE certified: Yes Included with the Machine - Complete set of tools - Full set of accessories Find more here - / Contact us at -

Manufacturer: CMZ Machine type: CNC Lathe Model: TTL-52-52-T1M-T2M+GL20II Year of manufacture: 2021 CE certified: Yes Key Features - 2-spindle automatic CNC lathe for series production - Integrated stacking magazine for automated part loading - Integrated robot GL20II for fully automated production cycle - Designed for high-volume precision series parts Electrical and Mechanical Data - Supply voltage: 400 V AC - Phases: 3 + N + PE - Frequency: 50 Hz - Max. power: 90 kVA - Max. current: 125 A - Pneumatic pressure: 6 bar - Machine weight: 11,000 kg Find more here - / Contact us at -

faceplate diameter: 850 mm swing diameter: 1200 mm turning height: 1000 mm Control: Siemens type: 840 D Tool changer: 36 Pos. x-travel: 870 mm z-travel: 1020 mm : live tooling: c-axis: 0 weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTe ...

Hours in picture Find more here - / Contact us at -

EMAG VTC 250 Vertical lathe GENERAL Project No.: 906007 Quantity: 1 pcs. Manufacturer: EMAG Type: VTC 250 Control: Siemens 840 D Year of Make: 2008 Condition: Used machine Layers Machine Approx (Hrs): 2 Layers DESCRIPTION TURNING Max. turning length 630 mm Max. chuck diameter 200 mm Max. speed main spindle 5000 1/min Max. power main spindle at ED 10-40/100% 38/29 kW Max. torque main spindle at ED 10-40/100% 250/200 Nm Full-clamping cylinder on the main spindle Tailstock NC-controlled Revolver left Number of stations/powered by 11/11 Tool holder in the VDI 40 turret Axles in the turret X/Z Max. rapid traverse speed in X/Y/Z 30/-/40 m/min Revolver right Number of stations/powered by 11/11 Tool holder in the VDI 40 turret Axles in the turret X/Z Max. rapid traverse speed in X/Y/Z 30/-/40 m/min OTHER EQUIPMENT Tool measurement using lasers  ...

CONTROLS   CNC Teach In Controls MONFORTS MTC-K WORKING RANGE TURNING   swing diameter (max): 500 mm   turning diameter (max): 290 mm   worpiece length max.: 1500 mm MAIN SPINDLE   spindle revolutions (min): 3 /min   spindle revolutions (max): 2800 /min DIMENSIONS / WEIGHTS   space requirements -left/right-: 3325 mm   space requirements -front/back-: 1550 mm   total height: 1740 mm ATTACHMENTS (TURNING)   tailstock: yes   European CE standards: yes

turning diameter over bed: Ø16 mm mm weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2045 x 900 x 1685 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning diameter over bed: 600mm, turning length: 1000mm, spindle head: 8, spindle bore: 63mm, tailstock quill size: MK5, gap: yes, faceplate diameter: 500mm, machine dimensions X/Y: 2800mm/1100mm, weight: approx. 2200kg. Including quick-change tool holder Multifix C, faceplate and coolant device. The front guide of the machine is worn and the feed in the apron is blocked. The bed slides can be moved via the lead screw. Documentation available. An on-site inspection is possible.

clamping range: J) 50- 115 mm clamping range: A) 170- 260 mm internal diameter: 110 mm external diameter: 176 mm weight: 3,3 kg Unused jaw turning ring - switchable jaws for bigger clamping range - mainly for chucks up to Ø 250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, testing is possible by prior arrangement.

Key data: 1000 mm, 450 mm

Inv. Num. : 9150 Type: CNC 10 A/B Producer: DÖRRIES Created: GO 2015 Parameters: Control system: Siemens Sinumerik SL Table diameter: 1000 mm Engine power: 69 kW Max. workpiece diameter: 1500 mm Max. workpiece height: 450 mm Max. workpiece weight: 5000 kg Maximum table speed: 2-120/ 20-400 1/min Equipment: Chip conveyor 4-position turret Hydraulic/Manual 3-Jaw Chuck

SERVO CONVENTIONAL LATHE WEILER " C 30" With 2 axes Siemens Sinumerik 802 C with WEILER Software C 1 Year of Make: 2002 Spindle bore: 42 mm Center width: 750 mm Circumference Ø over bed : 330 mm Speed range: 1 – 4500 rpm With the following accessories: Multifix Tool Holder Feed protection 3 jaw chuck RÖHM 0 160 mm 2 set of hard top jaws Collet device 3 centering tips Chip drip tray Chip backsplash wall with lighting Coolant Setup 10 Height Adjustable Machine Shoes Operating instructions THE MACHINE IS IN VERY GOOD CONDITION

Power supply: 75A, connected load: 35kW, control system: Traub SYSTEM TX 8F, weight: approx. 4.5t, operating hours: 84,126h, the machine has problems when machining inclined surfaces. An on-site inspection is possible.

Center distance: 2000mm, center height: 280mm, swing over bed: 560mm, swing over gap: 785mm, swing over carriage: 350mm, bed width: 350mm, spindle bore: 105mm, spindle speed range: 25-200/ 200-1500rpm, longitudinal feed range: 0.059-1.646mm/rev, cross feed range: 0.020-0.573mm/rev, metric threads: 0.2-14mm, quill diameter: 75mm, quill travel: 180mm, quill taper: MT 5, motor power: 7.5kW, length: 3340mm, width: 1150mm, height: 1460mm, weight: 2.72t. Equipment: 3-axis digital readout ES-12 V with LCD display, 3-jaw chuck PS3-315mm / D8, max. steady rest passage diameter: 180mm, max. follow rest passage diameter: 120mm, foot pedal with brake function according to CE, protective device for quick-change tool post, LED machine light, initial filling with Shell Tellus 46, two center points, frequency inverter, digital speed display, slip clutch, rapid traverse longitudinal and cross, coolant sy ...

turning diameter over bed: 1600 mm turning diameter over slide rest: 1280 mm turning length: 5000 mm centre height: 800 mm spindle turning speed range: 1 - 200 U/min spindle bore: 105 mm spindle diameter in front bearing: 120 mm main drive motor: 75 kW max. workpiece weight between centres: 30000 kg workpiece weight in steadies max.: 40000 kg bed slide rapid adjustment: 4000 mm/min. total power requirement: ca. 100 kW weight of the machine ca.: 52 t Refurbished in 2020 and equipped with: - 4-jaw faceplate Ø 1600 - thread cutting - 4-fold heavy duty tool holder - Hardened tracks - tailstock diffenret Steadies, chip conveyor and other accessories, available upon request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offered is a cam-controlled automatic lathe. Bar capacity: 29mm, speed range: max. 3750rpm, main drive: incrementally adjustable via change gears, number of tool slides: 4, control: cam control. Equipped with bar loading magazine, coolant device, tool turret, various tool holders, change gear set. Note: Sale is without extraction system. Weight: approx. 2200kg incl. magazine, overall dimensions X/Y/Z: approx. 5500mm/1300mm/1750mm. Inspection possible by arrangement.

A CNC production turning machine is offered. Working area bar capacity: 65mm, max. turning length: approx. 150mm, tool turret: 14 stations, control: C200. Equipped with automatic bar feeder magazine (type MBF), chip conveyor with integrated coolant cleaning system, compressed air connection, hydraulic chuck, signal light. Weight: approx. 5500kg, overall dimensions X/Y/Z: approx. 8500mm/2100mm/2200mm (incl. loading magazine). Inspection possible by arrangement.

A cam-controlled automatic lathe is offered. Working area bar capacity: 60mm, turret: 6 stations (axial), cross slides: 4 (radial), control: mechanical cam control. Equipped with bar guiding device, foldable safety cover, integrated coolant system, chip tray, various tool holders. Weight: approx. 2350kg, overall dimensions X/Y/Z: approx. 2100mm/1250mm/1750mm (dimensions without bar guide). Inspection possible by arrangement.

turning length: 1500 mm greates pass round over bed: 490 mm turning dia. over face-slide: 280 mm control: Heidenhain Manual Plus Speed range - up to: 3000 U/min spindle bore: 65 mm power capacity - workpiece power: 12/16 (100/60%) kW weight of the machine ca.: 3,5 t Equipment/Accessories: - Steady rest - Chuck - Tool holders - Drill bits - Tips - Multifix holder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS   CNC controls FANUC 32I-MODEL B - MANUAL GUIDE I BASIC FUNCTIONS   number of spindles: 1   number of turrets: 1   live positions: yes WORKING RANGE TURNING   turning diameter (max): 530 mm   bar diameter (max): 117 mm   worpiece length max.: 500 mm MAIN SPINDLE   spindle revolutions (max): 2000 /min   drive power: 37 kW   spindle torque: 3073 Nm X/Z SLIDE   number of tool positions (total): 12   number of live positions: 12   - rotation speeds (max): 4000 /min   - drive power: 7.5 kW ATTACHMENTS (TURNING)   chip conveyor: yes • Programmable tailstock MK#5 • Main spindle with 2-stage gearbox • Tooleye • Chip conveyor • High-pressure pump, 20 bar • 3-jaw chuck, diameter 380 mm • Tool breakage monitoring • Programme memory expansion • Programmable clamping pressure

WEILER Praktikant 140 B lathe YOM 1991, Serial No. 91-2735 With 3-axis digital readout Heidenhain Centre height 140 mm Swing over bed 280 mm Swing over support 158 mm Centre distance 650 mm Spindle hole 40 mm Spindle speeds 24 to 2500 rpm Tailstock Pinole Ø 40 mm Taper MK 3 Stroke Pinole 85 mm Feeds from 0.02 to 0.63 mm/rev Thread cutting: Metric, Imperial (inch), Module and Diametral Pitch threads possible Metric thread pitches from 0.25 to 8 mm Weight approx. 680 kg Accessories: -set of collets -knife holders -x2 jaw-chucks -others The machine has only been used in Germany. Very quiet drives, excellent condition

Inv. Num. : 9157 Type: SK 12 Producer: TOS Created: 1963 Parameters: Table diameter: 1120 mm Maximum workpiece weight: 5000 kg Max. workpiece diameter: 1250 mm Max. workpiece height: 1000 mm

Maximum Spindle Speed 2800 RPM Brand Weiler Power Source Electric Control Type Conventional Machine Weight (kg) 800 Chamfer Triple Model/Type VS1 Year of Manufacture 1979

Colchester triumph 2500 variable speed for sale. 50” long bed, gap bed, metric, quick change dickson toolpost, 3 jaw chuck, DRO, 6 position carriage stop, rear tool post cross slide. Direct from workshop clearance. Has been tested and seems to run fine in all gears and variable speeds, screw cutting, cross and longitudinal traverse. Moves smoothly along the bed and cross slide .

I got it from a collectors engineer which he did't have used it either. It is latest development from Myford, and founding a clean example like this is very difficult, Including high quality Jaws and Tool post as below: 3 jaw chuck, Cam Lock 4 jaw chuck, Cam Lock Dickson Quick Change Tool post, Face plate , Myford Cabinet with doors and key

Offered is a slant bed CNC lathe. Bar capacity: 65mm, travel X/Z: 160mm/510mm, control system: Siemens Sinumerik. Equipped with bar loading magazine. Weight: approx. 3500kg, overall dimensions X/Y/Z: approx. 2800mm/1800mm/1900mm. Inspection possible by arrangement. Expected to be available starting February 2027.

YOU-JI Vertical Lathe Model YV-320 E Fanuc Control Maximum Turning Diameter: 450 mm Self-centering diameter: 200 - 250 mm (8\" - 10\") X-axis travel (horizontal): Approx. 200 - 250 mm Z-axis travel (vertical): approx. 400 - 450 mm Spindle speed: Up to 3,000 - 4,000 rpm Total Machine Weight: approx. 4,500 - 5,000 kg Ground Clearance (W x D): Approx. 1,600 x 2,400 mm Total Height: Approx. 2,600 mm Auction-ID: A7-47195-22

Offered is a conventional lathe. Center height: 190mm, swing diameter over bed: 380mm, speed range: 27-1000rpm, speed stages: 12, thread types: metric, Whitworth, module, feeds: Norton gearbox, spindle mount: bayonet, operation: manual, control system: manual. Equipped with 3-jaw chuck, chuck guard with safety screen, four-position tool holder, lead and feed screw cover. Weight: approx. 1200kg, overall dimensions X/Y/Z: approx. 2000mm/1000mm/1300mm. Inspection possible by arrangement.

Control system: Philips B2T, machine currently not operational, partially dismantled, the fan of the main spindle motor has been completely renewed, the main drive and the mechanical assemblies (headstock, turret, ball screw) are intact, the Z-axis motor is defective and has already been professionally removed, the hydraulic clamping cylinder requires repair or must be replaced. An on-site inspection is possible.

Motorized turret, self-centering collet holder, tailstock, manuals present Auction-ID: A7-47195-32