130,511 used machines on RESALE, but how to find them? Machine Search
EXTRON 7-HK metal lathe ; equipped with longitudinal and transverse feed and suitable for threading; A-quality lathe; Voltage: 230 volts ; Between centers: 760 mm ; Turning diameter: 289 mm ; Over support: 180 mm ; Diameter: 28 mm ; Speed: 60–1700 rpm ; With 3-jaw with inner and outer jaws Auction-ID: A1-45170-22
HUVEMA HU 360 VA lathe ; frequency-controlled with foot brake and digital readout; professional universal lathe suitable for metalworking ; Voltage: 380 volts ; Between centers: 1000 mm ; Max. turning diameter: 356 mm ; Max. speed: 3000 rpm ; Diameter: 38 mm ; Tailstock: MK-3 ; With Bison 3-claw ; Weight approx. 1350 kg ; Auction-ID: A1-45170-13
Technical data Manufacturer: WEILER Model: Commodor B Machine Type: Lead and Pull Spindle Lathe Turning diameter over bed: 380 mm Turning diameter over slide: 190 mm Center width: 750 / 1000 mm Spindle bore: approx. 56 mm Spindle speed: 25 – 2000 rpm Connected load: 4 kW Voltage: 380 V Weight: approx. 1300 – 1500 kg Configuration Lead and pull spindle Tapping function (metric / inch) 3-jaw chuck Additional chuck Multifix tool holder Tailstock Coolant Setup Chip tray Note Technical data was taken from the nameplate and machine documentation. Specifications may vary depending on the version. Auction-ID: A1-46315-52
TARGET 410x760 metal lathe ; conventional lathe with automatic feed on longitudinal and transverse and suitable for threading; Voltage: 380 volts ; Power: 6.6 kW ; Between centers: 760 mm ; Max. turning diameter: 410 mm ; Diameter: 52 mm ; Recording: MK-4 ; Speed: 40–2000 rpm ; Foot brake: yes ; Cooling pump: yes ; Occupational health and safety technical: yes; Auction-ID: A1-45170-10
WEILER LZ330 / From educational institution incl. new 3-axis digital display -Turning diameter over bed 330mm -Turning diameter over support 165mm -Turning length 800mm -Speed range 25 - 2800 rpm -Automatic / longitudinal plan feeds -Multifix with 3x inserts -Drive power 3KW -Three-jaw chuck -Collet device with 20x collets -Copying device -Miscellaneous Accessories -Documentation Dimensions: LxWxH 1.8x0.7x1.6 meters / Weight 750Kg
turning diameter: 120 mm turning length: 640 mm control: Fanuc 32iT total power requirement: 45 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 254 mm spindle passage: 20 mm turning length: 120 mm Control: TX8i-s total power requirement: 40 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
\" Lot of approx. 300 kg of turning steels – mixed lot for lathes An extensive lot of turning steels for machine tools is for sale. Inventory according to visual inspection: • External turning steels • Internal turning steels / boring rods • Parting steels • Shaped steels • Partly equipped with carbide • Partly with indexable insert holders Different dimensions and designs. Sale exclusively as a total item. Total weight: approx. 300 kg Material: tool steel / partly carbide tipped Design: various shaft sizes and lengths \" Auction-ID: A7-46417-369
Batch of two four-jaw lathe chucks for independent workpiece clamping. The chucks come from the manufacturers WMW and ROTO RECORD and are ideal for eccentric, asymmetrical or irregular clamping on lathes. Technical data: • Type: Four-jaw lathe chuck, independently adjustable • Included: &nbs p; • 1× WMW DH 130×4-II, Ø130 mm • 1× ROTO RECORD DH 160×4-II, Ø160 mm Auction-ID: A7-46417-114
CONTROLS CNC controls TRAUB TX 8 BASIC FUNCTIONS number of spindles: 1 number machining units (turrets): 1 number of turrets: 1 live positions: yes number of c-axes: 1 WORKING RANGE TURNING swing diameter (max): 450 mm turning diameter (max): 350 mm bar diameter (max): 60 mm worpiece length max.: 490 mm MAIN SPINDLE spindle revolutions (max): 4000 /min c-axis: yes TOOL MAGAZINE number of positions: 12 ELECTRICAL SPECIFICATIONS total power consumption: 39 kW mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 3150 mm space requirements -front/back-: 2100 mm total height: 2100 mm total weight approx.: 4000 kg ATTACHMENTS (TURNING) tailstock: yes - Machine in good condition Features: - Complete tool holders (very comprehensive) - Includes driven tool hold ...
3× TOS 3-jaw lathe chuck (Ø80 / 100/ 160 mm)Lot of three 3-jaw spiral chucks from the manufacturer TOS. Condition: • used • traces of wear due to age and use • only complete as an item • manufacturer: TOS • type: 3-jaw spiral chuck, self-centering • Jaws: hard jaws • Included sizes: • Ø80 mm – IU 80 M1 – • Ø100 mm – 100/3-2 M1 – max. 5,300 min⁻¹ • Ø160 mm – IU 160 M1 – max. 3,500 min ...
\" Conventional lead and tension spindle lathe – turning length approx. 1,200 mm – Ø 475 mm Chuck lead and tension spindle lathe made by Boehringer Bros. (VDF), industrial version. Equipment: • 3-jaw chuck Ø 475 mm • Tailstock • Rotating center punch • Extensive accessories in the side cabinet (jaws, holders, inserts, etc.) • Coolant device • Controls on the support Turning length approx. 1,200 mm.Condition: Used machine with age-related signs of use. Visually appropriate to the age. Manufacturer: Gebr. Boehringer GmbH Type: Lead and pull spindle lathe Turning length: approx. 1,200 mm Chuck diameter: Ø 475 mm Spindle bore: approx. 80 mm • Dimensions in mm (LxWxH) approx. 3,450 x 1,300 x 1,700 mm \" Auction-ID: A7-46417-373
A conventional center lathe is available. An on-site inspection is possible.
General CNC slant bed lathe Traub is available. Tool stations: 12, tool holder: VDI40, turning diameter: 180mm, max. swing diameter: 450mm, max. turning length: 490mm, bar capacity: 60mm, travel X/Z: 160mm/490mm, rapid traverse: 15m/min, feed rate: 10m/min, machine dimensions X/Y/Z: approx. 3100mm/2000mm/1800mm, weight: approx. 4250kg, control: Traub System TX-8. An on-site inspection is possible.
SMEC SL 2000 MYear of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 360 mmTurning length : 520 mm____________Description:Main spindle:Speed:6,000 rpmPower (max.):18.5 kWBar capacity:52 mmWorkpiece clamping:3-jaw chuck, Samchully MH-206 V1Tool holder:Technology:12-station turretTool holder:BMT55Tool drive:5,000 rpmFeatures/Accessories:Chip management:Chip conveyorCoolant management:IKZ pump with oil skimmer and high pressure, 10 barTool measurement:Automatic measuring armAutomation:PreparedFinished part removal:Parts catcher with collection boxSetup operation:Electronic handwheel
SMEC SL 2000 MYear of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 360 mmTurning length : 520 mm____________Description:Main spindle:Speed:6,000 rpmPower (max.):18.5 kWBar capacity:52 mmWorkpiece clamping:3-jaw chuck, Samchully MH-206 V1Tool holder:Technology:12-station turretTool holder:BMT55Tool drive:5,000 rpmFeatures/Accessories:Chip management:Chip conveyorCoolant management:IKZ pump with oil skimmer and high pressure, 10 barTool measurement:Automatic measuring armAutomation:PreparedFinished part removal:Parts catcher with collection boxSetup operation:Electronic handwheel
Gildemeister Twin 65 Y - RG2Year of manuf. : 2007 Control : Siemens 840 D Turning diam. : 250 mmTurning length : 650 mm____________Description:In General:Year of construction:2007Control:Siemens 840 DBar capacity:65 mmTurning diameter:350 mmTurning length:650 mmMain spindle:Technology:Motor spindleSpeed:5,000 rpmPower max.:35 kWTorque max.:370 NmC-axis:0.001Bar capacity:65 mmChuck:Hainbuch Spanntop size 65Clamping cylinder:Hollow clamping cylinderSub spindle:Technology:Motor spindleSpeed:5,000 rpmPower:26 kWTorque:290 NmC-axis:0.001Chuck:Hainbuch Spanntop size 65Clamping cylinder:Partial hollow clamping cylinderZ-axis:670 mmX-axis:175 mmTool carrier i (X/Y/Z):Technology:Tool turret, 12 stationsTool holder:VDI 30Tool drive:4,000 rpm, 11 kW, 28 NmX-axis:300Y-axis:80 mm ( +/- 40 mm)Z-axis:650 mmTool carrier II (X/Z):Technology:Tool turret, 12 stationsTool holder:VDI 30Tool drive:4,000 ...
EMCO Hyperturn 65Year of manuf. : 2017 Control : Siemens 840Dsl Turning diam. : 500 mmTurning length : 800 mm____________Description:Mainspindle:Technology:MotorspindleSpeed:4.0 00 rpmPower (max.):29 kWTorque (max.):250 NmBarcapacity:76 mmSubspindle:Technology:MotorspindleSpeed:5.000 rpmPower (max.):29 kWTorque (max.):250 NmEjector:PneumaticMovement in Z:800 mmToolcarrier I (X/Y/Z):Technology:Turret with 12 stationsTaper:VDI30Tooldrive:5.000 rpm, 6,7 kW, 25 NmMovement in X/Y/Z:260/100/800 mmEilgang in X/Y/Z:30/12/30 m/minToolcarrier II (X/Z):Technology:Turret with 12 stationsTaper:VDI30Tooldrive:5.000 rpm, 6,7 kW, 25 NmMovement in X/Z:210/800 mmEilgang in X/Z:30 m/minEquipment/Accessory:Chipmanagement:Chip conveyorCoolingmanagement:Internal cooling unit with paperbeltfilter and High-pressure, 40 barRawmaterialfeed I:Robotinterface preparedRawmaterialfeed II:Barloaderinterface prepa ...
EMAG VTC 250 DUO DDYear of manuf. : 2020 Control : Siemens 840 Dsl Turning diam. : 140 mmTurning length : 700 mm____________Description:In General:Max. workpiece diameter:140 mmChuck diameter:250 mmMax. turning length:700 mmTrack I:Tool carrier I:Tool turret (X/Z)Tool drive:9,600 rpm, 44 NmTool holder:BMTNumber of stations:11 + 1 Part gripperX-axis:310 mmZ-axis:1,115 mmPosition sensors (X/Z):Direct scalesTrack II:Main spindle (OP10):Travelling direct drive spindleSpeed:5,000 rpmPower:33.9 kWTorque:231 NmChuck:Collet chuckClamping cylinder:Hydraulic clamping cylinderSupport control:PneumaticW-axis:772 mmC-axis:0.01°Position sensor (W):Direct scale:Sub-spindle (OP20):Direct drive spindleSpeed:5,000 rpmPower:33.9 kWTorque:231 NmChuck:2+2-jaw power chuckClamping cylinder:Hydraulic clamping cylinderC-axis:0.01°Track III:Tool Carrier II:Tool turret (X/Y/Z)Tool drive:9,600 rpm, 44 NmToo ...
SMEC SL 3000 BLMYear of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 405 mmTurning length : 956 mm____________Description:Main Spindle:Chuck:SAMCHULLY HS-12 (12 inch)Spindle Speed (Max.):3,000 RPMSpindle Nose:A2-8Motor Power (Cont./Max):18.5 kW / 26 kWMax. Turning Ø x Turning Length:405 mm x 956 mmTool Carrier (X/Z):Number of Tool Stations:12x BMT65Max. Milling Ø:433 mmTravel (X/Z):245 mm / 1,040 mmRapid Traverse (X/Z):24 m/min / 30 m/minTailstock:Quill Ø:110 mmQuill Stroke:100 mmEquipment/Accessories:Additional Equipment:Tool touch probe (Tool Setter, swiveling)Collision Protection:Turret with Hirth couplingYear of Manufacture:2023Weight:5,600 kg (according to configuration nameplate)Chip Management:Chip conveyorElectrical Connection:380 V / 3PH.PE / 50/60 Hz / 42 kVA::
Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-60
Universal lathe with cycle control VDF Boehringer VDF 400 DUS Control: Siemens Sinumerik 840 Year of Make: 2014 Internal machine no. 57 Turning length: 1,000 mm Turning diameter over bed / face slide: 420 / 235 mm Displacement of face slides: 250 mm Max. speed: 10 – 3,000 rpm Accessories: - Bezel - Suction - 3- Jaw chuck Schunk 250-62 - Tool holder
Key data: 430 mm, 1400 mm
Guide and pull spindle 32 A 380V 12.5 KW Speeds 18 - 1400 rpm Spindle passage 90 mm Lamp 4-way quick coupler with 14 pick-ups 3 interchangeable jaw sets Röhm Jaw Chuck with 33 cm Bezel Length 1.10 m Width 3 m Height 1.40 m Weight 2.5 T
Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-56
Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-55
Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-57
Cabinet Dimension 720x805x1045 Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-53
Guide and tension spindle lathe machine - Forkardt-3 jaw chuck F 315 - Single steel holder - Bezel - Moving center punch - Lining protection, limit switch monitored - Chip tray Turning diameter over bed 600 mm Turning diameter over support 400 mm Turning length 1000 mm Turning diameter in the offset 850 mm Speed 15 - 810 rpm Center height 300 mm Spindle bore 56 mm Total power requirement 9.0 KW Machine weight approx. 2.9 t Dimensions approx. 2.8 x 1.45 x 1.65 m Auction-ID: A7-46460-417
Key data: 280 mm, 400 mm
Technical data: Manufacturer: Spinner Type: TC 52 MC Year of Make: 2007 Control: Siemens 810D Shop Turn Travels: X 200 mm, Z 570 mm Switch-on hours: 4,364 h Turning diameter: max. 280 mm Circumferential diameter: max. 400 mm Main spindle Speed: 5,000 rpm Spindle passage: 52 mm Tools Revolver: 12-speed Tool holder: VDI 30 Number of driven tools: all Dimensions and weight Weight: approx. 3,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Chip conveyor Interface for bar feeders 3-jaw chuck
Professional Industrial Machine Digital display 3-jaw chuck 200 mm. 4-jaw chuck Face Plate Fixed bezel Steady bezel Multifix steel holder. Machine Light Foot brake Chip tray, chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine feet Machine Tool Turning diameter over bed 400 mm Turning diameter over support 260 mm Turning length 1500 mm Turning diameter in the offset 570 mm Speed 45 - 1800 rpm Tip height 210 mm Spindle bore 52 mm Tailstock quill holder MK 4 Connection voltage 400 V Total power requirement 3.5 kW Machine weight approx. 1.5 t Dimensions approx. 2.6 x 1.1 x 1.7 m Auction-ID: A7-46460-424
Lead and pull spindle lathe - 4-jaw chuck 200mm - Multifix steel bracket size B - Foot brake - Chip tray Turning diameter over bed 420 mm Turning diameter over support 290 mm Turning length 900 mm Speed 40 - 2000 rpm Tip height 210 mm Spindle bore 38 mm Total power requirement 4.0 KW Machine weight approx. 0.9 t Space requirement approx. 2.4 x 1.1 x 1.3 m Condition: unchecked (6) Auction-ID: A7-46460-499
Demonstration machine Speed in 6 steps 125 - 2000rpm. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. (Independent) Fixed bezel. Rotating bezel. 4-fold steel holder. Scout tub. Back wall. Spindle protection. Hardened bed rails. Longitudinal feed with left/right shift. Set of interchangeable wheels. Related tools. Turning diameter over bed 250 mm Turning diameter over support 140 mm Turning length 550 mm Speed 125 - 2000 rpm Tip height 125 mm Spindle bore 26 mm Tailstock quill holder MK 2 MK Tailstock quill stroke 65 mm Connection voltage 230 V Total power requirement 0.8 kW Machine weight approx. 0.135 t Space requirement approx. 1.25 x 0.6 x 0.6 m Condition: never used / new (5) Auction-ID: A7-46460-428
Lead and pull spindle lathe Three-jaw chuck 200mm Multifix Steel Bracket Size B 3 Multifix cassettes Emergency Stop Facility Turning diameter over bed 370 mm Turning diameter over support 200 mm Turning length 1000 mm Center height 185 mm Spindle bore 56 mm Tailstock quill holder MK 4 Speed 50 - 2000 rpm Drive power 4.0 kW Machine weight approx. 1.4 t Dimensions approx. 2.3 x 1.1 x 1.3 m Auction-ID: A7-46460-403
OKUMA CNC Lathe Serial Number: 103965 Power: 29.44 kW Control: Okuma OSP7000L Tool turret and hydraulic plate Includes chip conveyor and external control panel Diameter on bed: 620 mm Diameter on trolley: 420 mm Distance between points: 650 mm Spindle speed: 65–3500 rpm 12-position turret Fast feeds: X 15 m/min, Z 15 m/min Bar capacity: 80 mm CE marking Untested operation This item is delivered loaded by truck. The costs of dismantling and loading are borne by the buyer. Auction-ID: A7-46053-10
Professional Metal Lathe,Gear Cutting Machine - 3-jaw chuck - 4-jaw chuck - Hardened bed sheets - Clamping plate - 4-way chisel holder - Feed protection - Standing and moving bezel - Splash protection wall - Machine light Turning diameter over bed 280 mm Turning diameter over support 158 mm Turning length 600 mm Speed 45 - 2000 rpm Center height 140 mm Spindle bore 26 mm Tailstock quill holder MK 2 Tailstock quill stroke 60 mm Metric threads 0.25 - 2.5 mm Thread - Inch 6 - 96 TPI Connection voltage 230 V Total power requirement 0.75 kW Machine weight approx. 0.16 t Space requirement approx. 1.26 x 0.58 x 0.60 m Condition: never used / new (5) Auction-ID: A7-46460-526
Professional lathe 3-jaw chuck 4-jaw chuck Face Plate Fixed bezel Steady bezel Quick-change steel holder with 4 cassettes Halogen Machine Light Chip tray, chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Speed 75 - 2000 rpm Tip height 160 mm Spindle bore 50 mm Tailstock quill mount MK 3 Connection voltage 230 V Total power requirement 1.5 kW Machine weight approx. 0.29 t Space requirement approx. 2.0 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-46460-498
Lathes with: - 4-fold steel holder - 3-jaw chuck 315mm - Centering tip Turning diameter over bed 500 mm Turning diameter over support 320 mm Turning length 2100 mm Center height 250 mm Spindle bore 60 mm Spindle speeds 11 - 2000 rpm Total power requirement 7.0 kW Machine weight approx. 2.9 t Dimensions approx. 4.3 x 1.2 x 1.3 mm Auction-ID: A7-46460-438
TRAUB automatic multi-spindle CNC lathe line equipped with ACTRA-25T control. Includes BECHET (France) bar feeder, serial number 148. Equipped with chip conveyor and automatic parts evacuation system. Fully automated loading and unloading system. Machine with closed protection cabin. Configuration oriented to high-cadence mass production. Suitable for machining small and medium-sized parts. Control panel with manual controls and CNC control. Source of the feeder: Cluses, Haute-Savoie (France). It is sold as a complete line consisting of lathe, bar feeder and evacuation system. Auction-ID: A7-46053-3
Lathes with: - Copying device - Forkardt 3-jaw chuck F250 - Multifix steel holder - Coolant system - Machine light - Feed protection - Chip tray - Chip protection wall - Foot brake Turning diameter over bed 410 mm Turning diameter over support 220 mm Turning length 1000 mm Center height 205 mm Circumferential diameter in offset mm Spindle bore 46 mm Spindle speeds 40 - 2000 rpm Total power requirement 22.0 kW Machine weight approx. 1.8 t Space requirement approx. 2.42 x 1.3 x 1.55 mm Auction-ID: A7-46460-616
OKUMA CNC Lathe Serial Number: 131693 Power: 45 kW Control: OKUMA OSP-P200L 2 axes + C Diameter on bed: 620 mm Diameter on trolley: 420 mm Distance between points: 1270 mm Chainring: 400 mm Bar capacity: 80 mm Spindle speed: 35–3500 rpm 12-position motorized turret type VDI Fast feeds: X 20 m/min, Z 25 m/min MT5 tailstock Includes chip extractor and presetting Untested operation This item is delivered loaded by truck. The costs of dismantling and loading are borne by the buyer. Auction-ID: A7-46053-11
Bench lathe 2-axis LCD digital display system. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Drip tray Hardened bed sheets. Emergency stop. Feed protection Set of wheels. Base cabinet is not included Suitable tools. Turning diameter over bed 250 mm Turning diameter over support 140 mm Turning length 550 mm Speed 50 - 2000 rpm Tip height 125 mm Spindle bore 26 mm Tailstock quill holder MK 2 MK Tailstock quill stroke 65 mm Connection voltage 230 V Total power requirement 1.1 kW Machine weight approx. 0.15 t Space requirements approx. 1.3 x 0.6 x 0.65 m Condition: never used / new (5) Auction-ID: A7-46460-408
Professional lathe Digital display 3-jaw chuck 4-jaw chuck Face Plate Fixed bezel Steady bezel Quick-change steel holder with 4 cassettes Halogen Machine Light Chip tray, chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Rotating center punch Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Speed 75 - 2000 rpm Tip height 160 mm Spindle bore 50 mm Tailstock quill holder MK 3 MK Connection voltage 230 V Total power requirement 1.5 kW Machine weight approx. 0.29 t Space requirement approx. 2.0 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-46460-442
Longitudinal and transverse feed. 3-jaw chuck 160 mm. 4-jaw chuck 160 mm. Face Plate 4-way steel holder with 4 pcs tool holder 2 pcs steady rests Machine Light Drip tray Hardened bed sheets. Emergency stop. Feed protection Set of wheels. Machine Tools. Turning diameter over bed 290 mm Turning diameter over support 170 mm Turning length 750 mm Speed 75 - 2000 rpm Center height 145 mm Spindle bore 38 mm Tailstock quill holder MK 3 MK Tailstock quill stroke 80 mm Connection voltage 230 V Total power requirement 1.5 kW Machine weight approx. 0.34 t Space requirements approx. 1.3 x 0.75 x 0.7 m Condition: never used / new (5) Auction-ID: A7-46460-420
Professional Industrial Machine (400Volt) 3-axis digital display 3-jaw chuck 180 mm. 4-jaw chuck 200 mm. Face Plate 280mm Fixed bezel Steady bezel 4-fold steel holder. Halogen Machine Light Machine Light Foot brake Removable chip tray, chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Turning diameter over bed 360 mm Turning diameter over support 220 mm Turning length 1000 mm Turning diameter in the offset 380 mm Speed 70 - 2000 rpm Center height 180 mm Spindle bore 50 mm Tailstock quill holder MK 3 MK Connection voltage 230 V Total power requirement 1.8 kW Machine weight approx. 0.65 t Space requirement approx. 2.0 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-46460-571
3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Face Plate 320mm Fixed bezel Steady bezel 4-fold steel holder. Halogen Machine Light Machine Light Foot brake Removable chip tray, chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Turning diameter over bed 400 mm Turning diameter over support 264 mm Turning length 1000 mm Turning diameter in the offset 550 mm Speed 44 - 2000 rpm Center height 200 mm Spindle bore 52 mm Tailstock quill holder MK 4 MK Connection voltage 400 V Total power requirement 1.5 / 2.4 kW Machine weight approx. 0.9 t Dimensions approx. 1.9 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-46460-557
Table lathe with base cabinet 2-axis LCD digital display system. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Drip tray Hardened bed sheets. Emergency stop. Feed protection Set of wheels. Suitable tools. Turning diameter over bed 250 mm Turning diameter over support 140 mm Turning length 550 mm Speed 50 - 2000 rpm Tip height 125 mm Spindle bore 26 mm Tailstock quill holder MK 2 MK Tailstock quill stroke 65 mm Connection voltage 230 V Total power requirement 1.1 kW Machine weight approx. 0.15 t Space requirement approx. 1.3 x 0.6 x 1.3 m Condition: never used / new (5) Auction-ID: A7-46460-566
SINO Digital Display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Face Plate 250mm Fixed bezel Quick-change steel holder with 4 pcs steel holder Machine Light Chip tray, chip protection wall Hardened and ground bed sheets Feed protection Machine Tools Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Turning diameter in the offset 320 mm Speed 75 - 2000 rpm Tip height 160 mm Spindle bore 38 mm Tailstock quill mount MK 3 Connection voltage 400 V Total power requirement 1.5 kW Machine weight approx. 0.4 t Space requirement approx. 1.6 x 0.75 x 1.7 m Condition: never used / new (5) Auction-ID: A7-46460-500
Lead and pull spindle lathe - 4-jaw chuck 315mm - Multifix steel bracket size B - Feed in upper support - Bezel - Machine feet - Chip tray Turning diameter over bed 520 mm Turning diameter over support 260 mm Turning length 1600 mm Speed 14 - 710 rpm Tip height 260 mm Spindle bore 60 mm Total power requirement 11.0 KW Machine weight approx. 2.9 t Space requirement approx. 4.0 x 1.4 x 1.6 m Auction-ID: A7-46460-484
Equipped with - 27 mm spindle passage - Adjustable guide tracks - Powerful motor with 0.75 kW - High resolution of the axis spindles for exact positioning - Attention without digital display Scope of delivery: 3-jaw chuck 100 mm, interchangeable wheel set, splash guard. Turning diameter over bed 250 mm Turning diameter over support 130 mm Turning length 700 mm Speed 115 - 1620 rpm Tip height 125 mm Spindle bore 27 mm Tailstock quill holder MK 2 Tailstock quill stroke 40 mm Metric threads 0.2 - 3.5 mm Thread - Inch 8 - 56 inch. Thread - Module 0.2 - 12.5 mm Swivel range +/- upper slide 45 ° Connection voltage 400 V Total power requirement 0.75 kW Machine weight approx. 0.15 t Dimensions approx. 1.41 x 0.61 x 0.41 m Condition: never used / new (5) Auction-ID: A7-46460-542
maximum number of results exceeded
please refine your search
250 € 
