skin pack used for sale

Unpacking machine for removing glass bottles from beverage crates. Five crates are unpacked per cycle., Additional title: Glass bottle unpacker for beverage crates with 5 gripper heads, Operating hours: 9673, Capacity: 35000 bo/h, Power: 24 kW, Current: 40,8 A, Formats: 0.5 L NRW bottles in 9- and 20-bottle crates, Material: housing from stainless steel, Position: in a floor-standing cabinet with feet, Base construction: T-formation, Features: 5 packing heads; bottle table; crate transport; drives; protective housing with doors; control cabinet with control elements

System for depalletizing empty beverage crates and palletizing full beverage crates. The system consists of the following components: - Depalletizer (Matek/Packtech, 2001): robotic arm with clamping grippers for layer-by-layer depalletizing; upgraded in 2017. - Palletizer (Matek/Packtech, 2001): robotic arm with clamping grippers for layer-by-layer palletizing. - Pallet pressure check (Syscona, 2001) - 2 pallet magazines (for good and rejected pallets) - Pallet labeling system (2005) for applying EAN 128 labels - Pallet strapping system (Strapex, 2005) for applying two horizontal straps - Pallet conveyors with turning segments as well as infeed and discharge stations, Additional title: Complete palletising and depalletising system for beverage crates; 2001 - 2017, Capacity: 44000 bo/h, Formats: 0.5 L NRW bottles in 20-bottle and 9-bottle crates, Features: Depalletising robot; Palletising ...

diameter: div. number: 36x tool adaptor: BT 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: div. number: 40x tool adaptor: BT 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: div. number: 40x tool adaptor: BT 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: div. number: 56x tool adaptor: BT 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: div. number: 16x tool adaptor: SK 50 Tool Package DS SK 50 Other quantities also possible! A total of approx. 600x SK 50 holder available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Oil-air separation system, condensate separator, oil and water separation apparatus, oil separator, oil/water separator, air compressor oil-water separator, air receiver -Manufacturer: Atlas Copco, Oil-Water Separation System Air Receiver from Compressor GA 408 Pack -Type: 1615 2653 -Pressure: max. 11 bar -Dimensions: 315/200/H500 mm -Weight: 22.2 kg

Pressure and differential pressure switches, transmitters, monitors, sensors, differential pressure indicators, differential pressure switches -Manufacturer: Atlas Copco, Oil-Water Separation System Air Receiver from Compressor GA 408 Pack -Type: 4 ADS-10 -Pressure: max. 25 bar -Quantity: 2x P/N 1089 0416-01 / 1x P/N 1089 0416-02 (see photos for connections) -Dimensions: 125/105/H85 mm -Weight: 0.9 kg/pc.

Compressed air tank, pressure vessel, pressure tank, compressed air reservoir, pressure vessel, compressor tank, air reservoir -Manufacturer: Atlas Copco, Air tank standing from compressor type GA 408 Pack -Type: 19650295-49 -Contents: 46 l -Operating pressure: 11 bar -Accessories: incl. attachments, see photos -Dimensions: 520/300/H1010 mm -Weight: 62 kg

Product: Legumes or similar Packing: 100g, 400g, 500g, 1000g, 2000g bag vertical flow wrapping machine Model No.: SBM-420-3S Technical details: Applicable film types: OPP/CPP, OPP/CE, PET/PE, laminated Films Product Dimensions: Length: 20-300mm (adjustable) Width: 80-200mm (adjustable) (depending on the selection of the Shaped shoulder) Film width: 160-420mm Connected load: 230 V/1ph Standard equipment: 1) Pre-printing system for the application of Printed Films 2) Servo motor, controlled Bag removal system, Twin belt transport system for the Bag Feed 3) Selection of a forming shoulder for the Requested product 4) Welding system: Center Seal, Centrally running weld seam (pillow packing, Weld width: 15mm) 5) Safety cover CE format 6) Control unit "Panasonic" PLC & "E-view" color touchscreen 7) "Omron" temperature control 8) Lacquered machine housing (g ...

Flow-wrapping machine with 14-head multihead weigher incl. platform and feeding (bucket elevator) Condition: very good (used) Year of manufacture: 2023 Functionality: fully functional Description: Multihead weigher with 14 heads incl. flow-wrapping machine, feeding into the multihead weigher and removal belt for the finished goods. Built in 2023 and run very little. The system was bought 2 times at the time because the product demand had increased at short notice. After a short time, however, it dropped again, so that the machine is still almost completely NEW. All in stainless steel (304 SS) Weight range: 10 - 2000 g Speed: 120 bags/minute Accuracy: +-0.1g 220V 50/60Hz 1000 W 14 heads, 1.6 L volume each, 7 inch HMI, MCU Control Flow wrapping machine with SIEMENS PLC control, maximum film width 420 mm, bag size: B 60-200 mm, L60-300mm, SIEMENS se ...

Description Item # 9387 - COCOA BUTTER PRESS Manufactured by PACKINT Year 2018 capacity 4kg/hr

Overview This Twin Pack handle applicator, built in 2002, applies carry handles to PET bottle multipacks. It comes from a mineral water packaging line of the same year with an output of 20,000 - 30,000 bottles per hour depending on format. The machine is still installed and under power and can be inspected on site. Technical data Manufacturer: Twin Pack Year of manufacture: 2002 Machine type: handle applicator for beverage multipacks Line output: 20,000 - 30,000 bottles/h depending on format Line formats: PET bottles 0.25 l, 0.33 l, 0.5 l, 0.75 l, 1.0 l and 1.5 l Control: Siemens text operator panel Equipment Handle application unit with tape reels on a blue steel frame above the pack conveyor Control panel with separate start, stop and reset for the front and rear sections, emergency stop Guarded enclosure with transparent doors Condition Still installed and under power. An inspection o ...

Description Item # 9393 - SHRINK WRAPPER & TUNNEL Manufactured by GIEMME THERMO PACKAGING MACHINERY (Italy) Model Altair-70P Year 2017 400Volts, 50hz, 3phase With ELCOTEC Controls Previously packing glass jars of coffee Shrink Wrapper aperture size 620 x 380high 700mms wide welding Bar 680mms wide maximum spool width

2018 Italian Pack inline traysealer – pre-owned, Compact inline traysealer for fresh products., This 2018 Italian Pack traysealer seals trays with top film and is built as an inline machine with infeed and outfeed conveyor. It comes complete with a vacuum pump and several tool sets, and is suitable for MAP packaging depending on the configuration., Key features, - Inline version: infeed and outfeed conveyor with guards, ready to run in a packaging line, - Stainless steel construction: suited to hygienic food production environments, - PLC control with touchscreen: simple operation and programmable settings, - Automatic film feed: reel holder for top film above the sealing unit, - Vacuum pump fitted: suitable for MAP packaging, depending on the configuration, - Compact footprint: fits smaller production rooms as well, Tooling included, The machine comes with a set of tools for different ...

Compact tray sealer with rotary table, This sealer by UK manufacturer Packaging Automation (PA) works with a rotary table: you place the trays in the tool at the front, the table turns them under the sealing head and the sealed trays come back to the front. The fitted tooling takes two trays per cycle. Film runs from the reel at the side., The control panel reads 182/5. We did not find a legible rating plate with the year of manufacture. The machine stands on castors., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/packaging-automation-rotary-tray-sealer /, Type: Rotary tray sealer, Tooling: 2 trays per cycle, Controls: Text display with function keys, Construction: Stainless steel, base on castors

Offered for sale is an automatic shrink-wrapping system with film feed and shrink tunnel. The system consists of a packaging machine with an enclosed working area and a downstream shrink tunnel. Control system: Control panel with display, membrane keypad, control buttons and emergency stop button. Equipped with film roll holder, film guide, motorized conveyor belts, transparent protective enclosure and signal light. Inspection possible by arrangement.

max. format 36 x 49 cm Year of construction 2015 Flow wrapping machine Computer control with touch screen Insert height up to 120 mm Speed up to 28 m/min (idle) Feed belt without shrink tunnel Delivery date: immediately from stock

Description Item # 9421 - FLOWPACK WRAPPER FOR MINIS, INDIVIDUAL PRALINES, ETC. Manufactured by TEVOPHARM-BOSCH Model Pack-410 Year 2013 3-Up Knife Head For printed Film Was wrapping a 15g praline Including a DOMINO Date Coding Unit Also with NILFISK Dust Extraction Unit Up to 400 pieces per minute

Overview This Tempo-Pack SATURN is a rotary stretch wrapper for pallet loads, built in 2006 and supplied as a complete end-of-line system: infeed roller conveyors, a top-sheet dispenser, the wrapping station and outfeed conveyors with a 90° turn in an L-shaped layout. It was designed for cartons on Euro and half pallets at an output of 60 pallets per hour. The film carriage rotates around the stationary pallet, so the load is not turned during wrapping. Technical data Manufacturer: Tempo-Pack Model: SATURN Year of manufacture: 2006 Output: 60 pallets per hour Product: cartons on pallets Pallet formats: 1,200 x 800 mm (Euro pallet), 800 x 600 mm (half pallet) Maximum load footprint: 1,300 x 1,100 mm Maximum load height including pallet: 1,800 mm Maximum load weight: 1,500 kg Conveyor height: 150 mm Stretch film height: 500 mm Top-sheet film width: 1,400 mm Power supply: 3 x 400/230 V, 50 ...

diameter: div. number: 28x tool adaptor: SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: div. number: 20x tool adaptor: HSK-A 63 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: div. number: 30x tool adaptor: HSK-A 63 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: div. number: 30x tool adaptor: HSK-A 63 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Reciprocating compressor, Gea V600, medium NH3, freezing applications 25 bar – used - : Price from location: 29.500.-€ (net) dismantled, packed and loaded! Manufacturer: GEA Type: Grasso V 600 Package Year of Make: 2022 Serial Number: 220725-6417 PT: 38 5 bar PS LP 25 bar HP HP 25 bar TS Zone A: -60/+150 C TS Zone B: - 10/+170 C TS Zone C: +15/+45 C Flow rate (m³/h): 580 Number of cylinders: 8 Speed range: (rpm/min): 500 – 1,500 Former new price: 45.000.-€ (net) Condition: good Available: immediately Location Bünde, NRW Manufacturer's text: The GEA Grasso V 600 Package is an industrial reciprocating compressor unit from GEA for refrigeration and heating technology, which is designed for the natural refrigerant ammonia (R717 / NH₃) as standard. Package features: Pre-assembled complete units including compressor, drive motor, oil management, sens ...

diameter: div. number: 23x tool adaptor: VDI 25 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: div. number: 16x tool adaptor: HSK-A 63 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used TWIN PACK MDEL-S handle applicator - Year 2009Technical Specifications & Performance DataTwin Pack MDEL-S handle applicator designed for the automatic application of carry handles to beverage multipacks. Manufactured in 2009, this industrial packaging machine is configured to work with pre-spooled handle tape rolls and supports several multipack configurations for 0.5L, 0.75L and 1.5L bottles.Manufacturer: Twin PackModel: MDEL-SMachine type: Handle applicatorYear of manufacture: 2009Supported multipacks: 2 x 3 x 0.5L, 3 x 4 x 0.5L, 2 x 3 x 0.75L and 2 x 3 x 1.5LHandle supply: Pre-spooled handle tape rollsAdvanced Automation & Control SystemsThe MDEL-S is purpose-built for repeatable carry-handle application in an industrial packaging environment. Its handle tape roll configuration supports a continuous supply of handle material during multipack processing. Machines of this type are  ...

Professional tray packaging machine ORVED VGP-60 COMBI SKIN. Condition according to inventory: Refurbished. Brand: ORVED. Model: VGP-60 COMBI SKIN. Internal reference: RS03199_AFR. Code indicated in inventory: 0126CK-B5. Serial number / identification indicated in inventory: ITMSVGPSK00058. Configuration indicated in inventory with B5 mould. Professional equipment for packaging food in trays using Skin technology, vacuum, modified atmosphere (MAP) and heat sealing. Vacuum pump with a nominal capacity of 60 m³/h. Power supply: 400 V / 50-60 Hz / three-phase. Maximum reference electrical power: 2.9 kW. Professional stainless steel construction. Reference B5 tray dimensions for this generation: approx. 229 x 143 x 28 mm.Maximum overall tray dimensions supported by the machine: approx. 325 x 260 x 120 mm.Interchangeable mould system for different tray formats. Skin system for adhering the f ...

Professional tray packaging machine ORVED VGP-60 COMBI SKIN. Condition according to inventory: Refurbished. Brand: ORVED. Model: VGP-60 COMBI SKIN. Internal reference: RS03199_AFR. Code indicated in inventory: 0126CK-B5. Serial number / identification indicated in inventory: ITMSVGPSK00058. Configuration indicated in inventory with B5 mould. Professional equipment for packaging food in trays using Skin technology, vacuum, modified atmosphere (MAP) and heat sealing. Vacuum pump with a nominal capacity of 60 m³/h. Power supply: 400 V / 50-60 Hz / three-phase. Maximum reference electrical power: 2.9 kW. Professional stainless steel construction. Reference B5 tray dimensions for this generation: approx. 229 x 143 x 28 mm.Maximum overall tray dimensions supported by the machine: approx. 325 x 260 x 120 mm.Interchangeable mould system for different tray formats. Skin system for adhering the f ...

Skin area: 345 x 495 mm Part size: Max. approx. 120 mm Carton size: 345 x 495 mm Film width: 390 mm Including roller punch / cylinder punching machine Illig ZSM60 Contact details for ordering SKIN foil and cardboard available. Prior sale reserved - errors possible. Internal Reference Number: D-1149

P108 - used approx. 40 m³ / 40,000 litres polyester tank / GRP tank, double-skinned, flat bottom tank, Speidel tank, including as new ullage device(approx. one year). Manufacturer Speidel, aboveground storage tank, vertically standing on flat bottom, in good condition. volume: approx. 40 m / 40,000 litres material: polyester / GRP diameter: approx. 3.00 m height: approx. 6.50 m year of construction: 2001 Double-skinned, for media with a specific weight of up to 1.4 kg / litre. The container can be used as a storage tank for many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us  ...

ULTRAFILTRATION PLANT CAPACITY: FROM 1.000 LITER TO 50.000 LITER PER HOUR PROTEIN CONCENTRATION APPLICATIONS: UF CHEESE, FETA CHEESE, LABNE CHEESE, FRESH CHEESE, CREAM CHEESE, MILK PROTEIN CONCENTRATE, WHEY PROTEIN CONCENTRATE ...ETC PRODUCTIONS FULLY AUTOMATION CONTROLLED WITH HMI

NANOFILTRATION PLANTS CAPACITY: FROM 1.000 LITER TO 50.000 LITER PER HOUR USED FOR WHEY DEMNINERALIZATION AND CONCENTRATION, PERMEATE CONCENTRATION, FERMENTATION BROTH CONCENTRATION AND MANY APPLICATIONS FULLY AUTOMATION CONTROLLED WITH HMI TOUCH SCREEN OPEREATOR PANEL

Cutting width: 430 mm Cutting speed: 24 m/min Maximum throughput height: 90 mm Blade gap: 0 - 5 mm Apply length on infeed conveyor: 400 mm Infeed conveyor: 850 x 425 mm Discharge conveyor: 650 x 425 mm Overall dimension W x H x D (with/without discharge conveyor): 800 x 1190 x 1660 / 1210 mm Weight (with/without discharge conveyor): 225 / 210 kg Motor performance: 0.75 kW Electrical connection: 3 AC - 400 V - 50 Hz, 16 A Compressed air: not required

The Continuous Galvanizing Line No. 3, built in 1983 by NKK-Hitachi, offers a production capacity of 300,000 tons per year, processing low carbon steel coils with widths ranging from 610 to 1,300 mm and thicknesses of 0.27 to 2.3 mm. The line operated until March 2019. This left-hand line includes advanced features such as a high-capacity furnace, air knife wiping system, and a skin pass mill for superior surface quality. The line's equipment is designed for maximum coil weights of 45,500 kg and speeds up to 200 mpm. Its robust configuration, including multiple bridle rolls, deflector rolls, and chemical treatment tanks, ensures efficient galvanizing. The line's modern furnace output reaches up to 50 tons per hour, making it a high-performance solution for large-scale steel galvanizing operations. Make: NKK-HITACHI Year of manufacture: 1983 Mothballed since: Ceased producti ...

Jeremy Minimax Uno skin pass pass machine, built in 2018 - Manufacturer: Jeremy - Model: Minimax Uno - for 60cm wide trays - Hopper capacity approx. 40 litres - Skin pass machine with 2 attachments and accessory trolley - made of stainless steel Specifications: - Year of construction: 2018 - Power: 3.2 kW - Current: 16 A - Voltage 230 / 400 V - Frequency 50 Hz More pictures and information on request

Height=1.41 m, Overall length= 0.9 m, Overall width= 0.65 m, Net weight= 50 kg,

Height=0.98 m, Overall length= 0.8 m, Overall width= 0.91 m, Net weight= 350 kg,

Height=0.95 m, Overall length= 0.7 m, Overall width= 0.75 m,

Height=0.33 m, Overall length= 0.4 m, Overall width= 0.52 m, Net weight= 56 kg,

Height=1.07 m, Overall length= 0.52 m, Overall width= 0.72 m, Net weight= 62 kg,

Height=1.03 m, Overall length= 0.65 m, Overall width= 0.7 m, Net weight= 70 kg,

Height=1.24 m, Overall length= 0.85 m, Overall width= 1.75 m, Net weight= 255 kg,

We are selling here a skinning fleece from the manufacturer Maja, type EVM 437 in a very good used and functional condition. Runs on 400 volts, cutting width 43 cm, completely stainless steel, rollable, workshop tested, ready for immediate use, dimensions W/D/H 70/70/100 cm, others on request.

Height=1.36 m, Overall length= 1.71 m, Overall width= 1.02 m, Net weight= 166 kg,

Qty. 1 Second-hand 4-Hi Skin Pass Rolling Mill Mfc.: Sir James Farmer Norton Type: 4 - High Temper Mill 318/610 x 710 mm Built: 1977 Stopped: 2025 Strip Width: 300 – 650 mm Thickness: 0.1 – 1.5 mm Max. Tensile Force 2.860 kg, Coil weight: 10 T

Ref. №: 4104 Automatic belt skinning machine Cutting width: 370 mm Width: 800 mm Depth with conveyor belts: 1850 mm Height: 1200 mm Electrical connection: 0,75 kW, 400V/50Hz/3ACV

Qty. 1 Second-hand 2-Hi Skin Pass Rolling Mill Mfc.: Sir James Farmer Norton Type: 2 - High Temper Mill 318/610 x 710 mm Built: 19 Stopped: 2025 Strip Width: 300 – 600 mm Thickness: 0.3 – 4.0 mm Max. Tensile Force 3000 kg, Coil weight: 10 T