sk used for sale

Tool holder, milling tool holder -Number: 14x SK50 recording -Tool holder: Ø 36 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Price/Sale: complete -Dimensions: 800/315/H650 mm -Weight: 62 kg

Tool holder, milling tool holder -Number: 14x SK50 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Price/Sale: complete -Dimensions: 800/315/H740 mm -Weight: 66 kg

1 boring mill turntable Make: Skoda Model: S 60 Year of construction: 1987 Table size: 4000 x 3600 mm Table load: 60 tons. Rotatable. 360 degrees Longitudinal travel: 1100 mm Weight: 38 to.

Machine can be used as stretch bander with shrink tunnel and as full wrapping machine with side folding/sealing. • Output max. 22 packs/min., depending on the format • Straight infeed • Sealing width max. 440 mm • 2 infeeds: For cartons and bottles • Cartons, insertion length 60-360 mm, insertion width 60-200 mm, insertion height 30-165 mm • Bottles, insertion width/Ø max. 41 mm, insertion height max. 180 mm • Packing material PE/PP • Film width max. 345 mm • Format change approx. 15 min. • Stacking device • Shrink tunnel Skinettatherm with 2 blowers, 20-600°C • Outfeed conveyor after shrink tunnel 1,200 x 380 mm • PLC Siemens S7-300, touch screen Siemens Simatic TP27 • Drive 400V/50Hz

Tool carrier for SK 30 holders -made of: polypropylene copolymer -Impact and scratch resistant, insensitive to heat -resistant to: mineral oil and various chemicals -Price: complete

Tool holder for SK 40 chucks -made from: Polypropylene copolymer Impact and scratch resistant, heat resistant -resistant to: mineral oil and various chemicals Price: complete

Card holder for Eurocard, screw terminal -Connection type: 4 mm² solid wire -Mounting type: snap-on to mounting rail (EN 60715) or screw-on -Quantity: 6 available -Price: per piece -Dimensions: 137/60/H160 mm -Weight: 0.24 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Flat gear -Speed: 120 rpm -Power: 1.5 kW -Construction: B3 -Hollow shaft: Ø 30 x 120 mm -Protection class: IP 54 -Dimensions: 410/290/H215 mm -Weight: 29 kg

Max. width: 3200 mm Nominal width: 3050 mm Max. thickness width: 40 mm Min. thickness width: 12 mm Max. material speed: 12 m/min Work rolls: -Units: 7 -Diameter: 340 mm Backup rolls: -Units: 5 -Diameter: 340 mm Supporting rolls: -Units: 15 -Diameter: 334 mm Diameter of feed and eccentric rolls: 380 mm Electrical motor: 132 kW Floor space: -Length: 3657 mm -Width: 5486 mm -Height: 3048 Total weight:105 tons

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 6.5 rpm -Power: 0.12 kW -Diameter shaft: Ø 25 mm -Brake: 4 Nm -Construction: B3 -Protection class: IP 54 -Dimensions: 480/184/H205 mm -Weight: 21 kg

Gear motor, electric motor -Speed: 114 rpm -Power: 0.75 kW -Construction: B3 angle -Diameter shaft: Ø 20 mm -Protection class: IP 65 -Price: per piece -Number: 2x available -Dimensions: 430/230/H185 mm -Weight: 18.7 kg

Electric motor, three-phase motor -Power: 0.37 kW -Speed: 1380 rpm -Shaft diameter: 14 mm -Construction: B14G -Protection class: IP 54 -Number: 11x motors available -Price: per piece -Dimensions: 240/160/H185 mm -Weight: 6.2 kg

TO HOM IT MAY CONCERN; WE VE 2 SETS OILY WATER SEPARATORS RWO SKIT / S - DEB 1.0 AT OUR STOCK. SEPARTORS SKIT ARE NEW AND UNUSED . EX STOCK . IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Gear motor, electric motor -Speed: 120 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 370/215/H170 mm -Weight: 13.1 kg

Tool holder, milling holder, milling tool -Number: 2x SK40 holders -Adapter -Take: SK40 -1x mounting tool: Ø 13 x 22 mm -1x mounting tool: Ø 27 x 55 mm -suitable for: tool changer -Sale: only complete -Weight: 3.4 kg

Tool holder, milling holder, milling tool -Number: 2x SK45 holders -Inside mount: Ø 36 x 90 mm -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for: tool changer -Sale: only complete -Weight: 5.4 kg

Brand SKF Type 6202-Z/QE6 Year of construction: Unused Weight (Kg) approx. 9400 large / 8780 net Number of units in stock 193.200 ( approx) Made in France Comments Contact us for min. quantity Verkoopcondities Contact us for min. quantity

MAX DIAMETER 200 MAX LENGHT 2500

Tool holder, milling holder, milling tool -Number: 2x SK45 holders -1x recording inside: Ø 28 mm -1x recording outside: Ø 40 mm -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for: tool changer -Sale: only complete -Weight: 4.5 kg

Gear motor, electric motor -Speed: 18.4 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Dimensions: 360/175/H170 mm -Weight: 13.1 kg

Gear motor, electric motor, three-phase motor -Speeds: 119 rpm -Power: 0.12 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: -Dimensions: 340/180/H170 mm -Weight: 11.6 kg

Tool holder, milling holder, milling tool -Number: 2x SK50 holders -Adapter -Adjustment: SK50 -1x tool holder: MK3 -1x tool holder: Ø 20 mm and with CNC pull studs -suitable for: tool changer -Sale: only complete -Weight: 6 kg

Maja Skinny II, skining and derinding machine, CE-conform execution, year 2019, power supply: 3 Ph, 400 V, 50 Hz, 2.0 A, 0.75 kW, cutting width 434 mm, with infeed conveyor, net weight approx. 190 kg, refurbished condition

SKODA W200GNR 1978 /CNC MEFI 836 y.m. 2005 ball screws y 4150mm x 8000mm millng heads floor plates 5600x1885x400 rotary table E20 load 20tons

Gear motor, electric motor, three-phase motor -Speed: 12.1 rpm -Power: 0.04 kW -Construction: B14 -Diameter shaft: 16 mm -Protection class: IP 44 -Dimensions: 310/110/H155 mm -Weight: 7.7 kg

Tool holder, milling holder, milling tool -Number: 2x SK50 holders -Adapter -Adjustment: SK50 -Tool holder: MK3 -Total length: mm -Sale: only complete -Weight: 4.8 kg

creasing machine for board Make Sächsische Kartonnage Maschinen Model Creasing machine Year 1950 Creasing length 50 cm Creasing depth adjustable/variable Creasing span adjustable-variable Creasing thickness possible up to 4/5 mm board Available Direct

W160HC with ISO 50 y.m. 1987 xtravel 4000mm y travel 3150mm rotary table S35C load 35tons, 3150 x 2800mm milling heads, tools

Tool holder, milling holder, milling tool -Number: 5x SK50 holders -different recording sizes see pictures -Reducing sleeves, cutter head, shell end mill -Sale: only complete -Weight: 19.7 kg

Table capacity 80 TONS Clamping plate width mm 3550 length mm 4000 Carriage travel V mm 2000 Heidenhain scale Rotary axe B ROD 700 Table height mm 1460 Table weight kg 52000

Mobile milling machine for attachment, e.g. a lathe. As good as new, almost unused condition More data according to photos

Kaeser SK26 Air compressor Serial: 2610494 Air compressor, 15Kw, 7.5Bar, rate motor speed 3000/min, 3Ph

Kaeser SK26 Air compressor Serial: 264957 Air compressor, 15Kw, 7.5Bar, 2.4M3/min, 3Ph

Kaeser SK26 Air compressor Serial: 2610493 Air compressor, 15Kw, 7.5Bar, rated motor speed 3000min, 3Ph

Tool holder, milling holder, milling tool -Number: 7x SK50 holders -different recording sizes see pictures -Reducing sleeves, cutter head, shell end mill -Sale: only complete -Weight: 28 kg

Donut funnel Scoop Scoop Reimelt SKF 5/3300 Fettback -Reimelt Scoop for Reimelt fat baking systems -Type: SKF5/3300 -Three-phase 400V 3N 50Hz -Control voltage: 230 volts -Power consumption: 1kW -Rated current: about 3A -Fuse: 6A -Degree of protection: IP54

Pallet feeder – separating head 4 buckles 2 knives Navigator Vaculift Vacubelt A76 belt delivery

Key data: 1400 , 1000 , 11280

SKODA SRM heavy duty lathe Turning diameter over bed 1400mm Turning diameter over support 1000mm turning length 11280mm faceplate 1250mm Workpiece weight in the stands max. 20000kg Bezel 395mm Bezel 620mm workpiece weight 16000kg Total power requirement 40kW

Mint condition, laminating width up to 1100mm, temperature 0- 14 degrees. Lamination thickness up to 13mm.

Gear motor, electric motor, electric gear motor -Speed: 50 rpm -Power: 0.37 kW -Construction: B14 angle -Diameter hollow shaft: 25 mm -Protection class: IP 55 -Number: 1x motors available -Price: per piece -Dimensions: 330/180/H170 mm -Weight: 11 kg/piece

Gear motor, electric motor -Speed: 18 rpm -Power: 0.18 kW -Construction: B3/5 angle -Shaft diameter: Ø 12 mm -Protection class: IP 55 -Dimensions: 290/130/H170 mm -Weight: 5.7 kg

Gear motor, electric motor, three-phase motor -Speeds: 120 rpm -Power: 0.12 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Dimensions: 335/175/H180 mm -Weight: 11.1 kg

Inv. Num. : 7576 Type: WI 130 Producer: ŠKODA Created: 1969 GO 2008 Parameters: Control system: Heidenhain iTNC 530 Work table length: 2000 mm Work table width: 1800 mm X-axis travel: 1900 mm Y-axis travel: 1980 mm Travel travel Z-axis: 1250 mm

Sheeter Kombi Rondo Doge TOP Model: SKO 611 Stainless Steel for all doughs for rolling out and touring with program control, LED display Extendable table left, belt width 635 mm Roller opening 0.3 to 45 mm Effective pressure plate with handwheel adjustment with long roller / long mould at the bottom with tow for wrapped products Dough sheeter mobile with brakes all belts and scrapers NEW DGUV V3 tested Connection 400V, 16A-CEE plug Dimensions: 2210 x 1175 x 1383 mm, WxDxH Used machine overhauled with 6 months warranty Option: Delivery Maintenance contract Service Package E-Box Find your sheeter here!

Sheeter Kombi Rondo Doge TOP Model: SKO 611 for all doughs for rolling out and touring with program control, LED display Extendable table left, belt width 635 mm Roller opening 0.3 to 45 mm Effective pressure plate with handwheel adjustment with long roller / long mould at the bottom with tow for wrapped products Dough sheeter mobile with brakes all belts and scrapers NEW DGUV V3 tested Connection 400V, 16A-CEE plug Dimensions: 2210 x 1175 x 1383 mm, WxDxH Used machine overhauled with 6 months warranty + service package Option: Maintenance contract Many more TOP sheeters in stock!

Refurbished Machine for Sale Machine was completely dismantled and rebuilt. All wear parts -ball bearings-bushings-etc. new Electrics new, motors rewound and checked. Measurement protocol available. Sold with a 6-month parts warranty. Old machine can be taken back. Tank cars are also available. Offer is "without boiler" More images possible if needed

Gear motor, electric motor, electric gear motor -Speed: 50 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 430/140/H200 mm -Weight: 13.2 kg/piece

Gear motor, electric motor, electric gear motor -Speed: 95/190 rpm -Power: 0.3/0.43 kW -Diameter shaft: Ø 20 mm -Construction: B3 -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 360/185/H175 mm -Weight: 13.2 kg

Gear motor, electric motor, three-phase motor -Speeds: 119 rpm -Power: 0.09 kW -Construction: B5 -Diameter shaft: Ø 20 mm -IP protection -Number: 1x motors available -Price: per piece -Dimensions: 355/165/H190 mm -Weight: 11.5 kg/piece

Gear motor, electric motor -Speed: 107 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Number: 2x motor available -Price: per piece -Dimensions: 360/170/H170 mm -Weight: 13.7 kg