sk used for sale

chamber volume: 170 liter useable volume: -- liter friction: -- motor drive power: 800 kW Condition: used - Specification: internal mixer used as additional option: Rubicon batch-off plant - capacity approx.: 170 litres - rotor model: tangential design - drive controller: Allen Breadley - Control: Mitsubishi - Motor speed: 1,000 rpm - Gearbox: Panamax 9000 make Sumitomo - Rotor speed: 5.6 - 55.6 rpm - Chamber hardness: 45 -50 HRC - Motor: 800 kW - 1000 rpm - 380 V, 50 Hz - Moror make: Teco - Output: 27 tons/day - Cycle time approx.: 4 - 8 min - Height approx.: 7,500 mm - Weight approx.: 35,000 kg, incl. gearbox and motor Available as an option: - Batch-off system Make: Rubikon / Mattech - Cooling bars max.: 300 mm / 2x 80 mm The data for this ad was created with ModulMWS - the software solution  ...

Tool holder, milling tool holder -Number: 13x SK50 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -only sold as a complete set -Weight: 54 kg

Tool holder, milling holder, milling tool -Number: 17x SK50 mounts -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -is only sold complete -Weight: 70 kg

We have for sale milling and borig heads for Skoda HBM IV25, IR100, IFW1, IFW2, IFW3, IFH, IOT steady rest for W200 price from 1000-5000eur

Tool holder, milling tool holder -Number: 9x SK30 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -with transport box -Price/Sale: complete -Weight: 10 kg

Combi sheeter Seewer Rondo SKO68 Seewer Rondo SKO 68 Sheeter - Seewer Rondo dough sheeter - with 2 bands - right left rotation -left strap extendable -Hinged straps - mobile on wheels - Machine is functionally tested and cleaned

milling device for Skoda lathe SUT160

Manafacture: Skoda Type: E25OB23941 Year: 1989 Part weight: up to 25t Dimensions: 2,000 x 2,000 mm electr. adjustable Weight: 10t

Inv. Num. : 6637 Type: SRM 125-4000 Producer: Škoda Generated: Parameters: Control system: SIEMENS SINUMERIK 828 D Maximum turning length: 4000 mm Maximum turning diameter over bed: 1250 mm Maximum turning diameter over support: 900 mm Maximum workpiece weight: 14000 kg Turning diameter: 1030 mm Travel speed of the Z-axis and X-axis: 2000 mm/min Rapid traverse X: 3000 mm/min Rapid traverse Z: 6000 mm/min Equipment: Feed drives Siemens DRO Heidenhain

Tool holder, milling tool holder -Number: 4x SK40 recording -various versions -Collet: Ø 8/10/12/20 mm -Sale/Price: complete -Weight: 4 kg

1 boring mill turntable Make: Skoda Model: S 60 Year of construction: 1987 Table size: 4000 x 3600 mm Table load: 60 tons. Rotatable. 360 degrees Longitudinal travel: 1100 mm Weight: 38 to.

2 clamping brackets Dimensions: 3000 x 1200 mm

MAX DIAMETER 200 MAX LENGHT 2500

TO HOM IT MAY CONCERN; WE VE 2 SETS OILY WATER SEPARATORS RWO SKIT / S - DEB 1.0 AT OUR STOCK. SEPARTORS SKIT ARE NEW AND UNUSED . EX STOCK . IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Brand SKF Type 6202-Z/QE6 Year of construction: Unused Weight (Kg) approx. 9400 large / 8780 net Number of units in stock 193.200 ( approx) Made in France Comments Contact us for min. quantity Verkoopcondities Contact us for min. quantity

SKODA W200GNR 1978 /CNC MEFI 836 y.m. 2005 ball screws y 4150mm x 8000mm millng heads floor plates 5600x1885x400 rotary table E20 load 20tons

Tool holder, milling tool holder -Number: 14x SK50 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Price/Sale: complete -Dimensions: 800/320/H540 mm -Weight: 58 kg

Maja Skinny II, skining and derinding machine, CE-conform execution, year 2019, power supply: 3 Ph, 400 V, 50 Hz, 2.0 A, 0.75 kW, cutting width 434 mm, with infeed conveyor, net weight approx. 190 kg, refurbished condition

W160HC with ISO 50 y.m. 1987 xtravel 4000mm y travel 3150mm rotary table S35C load 35tons, 3150 x 2800mm milling heads, tools

Tool holder, milling tool holder -Number: 8x SK50 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -only sold as a complete set -Weight: 26 kg

Table capacity 80 TONS Clamping plate width mm 3550 length mm 4000 Carriage travel V mm 2000 Heidenhain scale Rotary axe B ROD 700 Table height mm 1460 Table weight kg 52000

Mobile milling machine for attachment, e.g. a lathe. As good as new, almost unused condition More data according to photos

Kaeser SK26 Air compressor Serial: 2610494 Air compressor, 15Kw, 7.5Bar, rate motor speed 3000/min, 3Ph

Tool holder, milling tool holder -Number: 14x SK50 recording -Tool holder: Ø 36 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Price/Sale: complete -Dimensions: 800/315/H650 mm -Weight: 62 kg

Tool holder, milling tool holder -Number: 14x SK50 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Price/Sale: complete -Dimensions: 800/315/H740 mm -Weight: 66 kg

Tool carrier for SK 30 holders -made of: polypropylene copolymer -Impact and scratch resistant, insensitive to heat -resistant to: mineral oil and various chemicals -Price: complete

Kaeser SK26 Air compressor Serial: 264957 Air compressor, 15Kw, 7.5Bar, 2.4M3/min, 3Ph

Kaeser SK26 Air compressor Serial: 2610493 Air compressor, 15Kw, 7.5Bar, rated motor speed 3000min, 3Ph

Tool holder for SK 40 chucks -made from: Polypropylene copolymer Impact and scratch resistant, heat resistant -resistant to: mineral oil and various chemicals Price: complete

Card holder for Eurocard, screw terminal -Connection type: 4 mm² solid wire -Mounting type: snap-on to mounting rail (EN 60715) or screw-on -Quantity: 6 available -Price: per piece -Dimensions: 137/60/H160 mm -Weight: 0.24 kg

Donut funnel Scoop Scoop Reimelt SKF 5/3300 Fettback -Reimelt Scoop for Reimelt fat baking systems -Type: SKF5/3300 -Three-phase 400V 3N 50Hz -Control voltage: 230 volts -Power consumption: 1kW -Rated current: about 3A -Fuse: 6A -Degree of protection: IP54

Pallet feeder – separating head 4 buckles 2 knives Navigator Vaculift Vacubelt A76 belt delivery

Gear motor, electric motor, three-phase motor, electric gear motor -Flat gear -Speed: 120 rpm -Power: 1.5 kW -Construction: B3 -Hollow shaft: Ø 30 x 120 mm -Protection class: IP 54 -Dimensions: 410/290/H215 mm -Weight: 29 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 6.5 rpm -Power: 0.12 kW -Diameter shaft: Ø 25 mm -Brake: 4 Nm -Construction: B3 -Protection class: IP 54 -Dimensions: 480/184/H205 mm -Weight: 21 kg

Key data: 1400 , 1000 , 11280

SKODA SRM heavy duty lathe Turning diameter over bed 1400mm Turning diameter over support 1000mm turning length 11280mm faceplate 1250mm Workpiece weight in the stands max. 20000kg Bezel 395mm Bezel 620mm workpiece weight 16000kg Total power requirement 40kW

Mint condition, laminating width up to 1100mm, temperature 0- 14 degrees. Lamination thickness up to 13mm.

Gear motor, electric motor -Speed: 114 rpm -Power: 0.75 kW -Construction: B3 angle -Diameter shaft: Ø 20 mm -Protection class: IP 65 -Price: per piece -Number: 2x available -Dimensions: 430/230/H185 mm -Weight: 18.7 kg

Electric motor, three-phase motor -Power: 0.37 kW -Speed: 1380 rpm -Shaft diameter: 14 mm -Construction: B14G -Protection class: IP 54 -Number: 11x motors available -Price: per piece -Dimensions: 240/160/H185 mm -Weight: 6.2 kg

Gear motor, electric motor -Speed: 120 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 370/215/H170 mm -Weight: 13.1 kg

Inv. Num. : 7576 Type: WI 130 Producer: ŠKODA Created: 1969 GO 2008 Parameters: Control system: Heidenhain iTNC 530 Work table length: 2000 mm Work table width: 1800 mm X-axis travel: 1900 mm Y-axis travel: 1980 mm Travel travel Z-axis: 1250 mm

Sheeter Kombi Rondo Doge TOP Model: SKO 611 Stainless Steel for all doughs for rolling out and touring with program control, LED display Extendable table left, belt width 635 mm Roller opening 0.3 to 45 mm Effective pressure plate with handwheel adjustment with long roller / long mould at the bottom with tow for wrapped products Dough sheeter mobile with brakes all belts and scrapers NEW DGUV V3 tested Connection 400V, 16A-CEE plug Dimensions: 2210 x 1175 x 1383 mm, WxDxH Used machine overhauled with 6 months warranty Option: Delivery Maintenance contract Service Package E-Box Find your sheeter here!

Sheeter Kombi Rondo Doge TOP Model: SKO 611 for all doughs for rolling out and touring with program control, LED display Extendable table left, belt width 635 mm Roller opening 0.3 to 45 mm Effective pressure plate with handwheel adjustment with long roller / long mould at the bottom with tow for wrapped products Dough sheeter mobile with brakes all belts and scrapers NEW DGUV V3 tested Connection 400V, 16A-CEE plug Dimensions: 2210 x 1175 x 1383 mm, WxDxH Used machine overhauled with 6 months warranty + service package Option: Maintenance contract Many more TOP sheeters in stock!

Refurbished Machine for Sale Machine was completely dismantled and rebuilt. All wear parts -ball bearings-bushings-etc. new Electrics new, motors rewound and checked. Measurement protocol available. Sold with a 6-month parts warranty. Old machine can be taken back. Tank cars are also available. Offer is "without boiler" More images possible if needed

Tool holder, milling holder, milling tool -Number: 2x SK40 holders -Adapter -Take: SK40 -1x mounting tool: Ø 13 x 22 mm -1x mounting tool: Ø 27 x 55 mm -suitable for: tool changer -Sale: only complete -Weight: 3.4 kg

Tool holder, milling holder, milling tool -Number: 2x SK45 holders -Inside mount: Ø 36 x 90 mm -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for: tool changer -Sale: only complete -Weight: 5.4 kg

Tool holder, milling holder, milling tool -Number: 2x SK45 holders -1x recording inside: Ø 28 mm -1x recording outside: Ø 40 mm -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for: tool changer -Sale: only complete -Weight: 4.5 kg

Gear motor, electric motor -Speed: 18.4 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Dimensions: 360/175/H170 mm -Weight: 13.1 kg

Gear motor, electric motor, three-phase motor -Speeds: 119 rpm -Power: 0.12 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: -Dimensions: 340/180/H170 mm -Weight: 11.6 kg

Tool holder, milling holder, milling tool -Number: 2x SK50 holders -Adapter -Adjustment: SK50 -1x tool holder: MK3 -1x tool holder: Ø 20 mm and with CNC pull studs -suitable for: tool changer -Sale: only complete -Weight: 6 kg

SPECIFICATIONS: Machining width: 1350 mm Sanding belt width: 1370 mm Sanding belt length: 1900 mm Steel roller: Ø 150 mm Processing thickness: max. 150 mm Total installed power: 10 hp Variable speed drive: 0.75 hp Predisposition to depressor or aspirator COMPOSITION: 01 Calibration Roller + Buffer Roller Unit 01 Scotch brite aggregate