129,000 used machines on RESALE, but how to find them? Machine Search
2pcs 3500 x 2000 x 350 mm price 7000eur/pc
4 pcs 5600 x 1885 x 400 mm price 10500eur/pc
Saw blade diameter: 370 mm cutting capacity at 90°: 115 mm cutting capacity at 45°: 115 mm drive motor: 380 V, 4.5 kW space: 1000 x 1200/2200 x 1500 mm weight: approx. 900 kg
P64 - used appr. 46 m³ / 46,000 litres polyester tank / GRP tank, aboveground, vertical, flat bottom tank, Skoda tank. volume: appr. 46 m³ / 46,000 litres material: polyester / GRP diameter: Ø appr. 3.10 m height: appr. 6.50 m Skoda tank, aboveground, vertically standing tank, flat floor, dome upon the tank body, multiple connections, in- and outlets. Tank as shown on the pictures. The container can be used as a storage tank for many different media, such as water, liquid food, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, rainwater tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar on ...
DATA ON THE MACHINE Machine type: Machine landing gear / Tank rolls Manufacturer: HTS Model: ECO-Skate I30L-I30S / 6t payload Built: 2020 Condition: new Location Warstein , Germany Reference MZ-HTS-ECOSKATE-I30L+S-DP Description We offer you a new transport suspension from the manufacturer HTS / made in Germany consisting of Train drawbar Type:I30L Roll count: 4 / Material PU Height: 110mm Payload: 3t Weight: 14kg And Paralell suspension type: 30S Roll number 4 / Material PU Height: 110mm Connecting rod: 120-880mm Payload: 3t Weight: 14 kg Further technical data on request. Not the chassis you're looking for? We are happy to offer you heavy-duty suspensions in various sizes up to 128t payload. Our offer is aimed at professionals who are covered in accordance with the Trade Code in accordance with Section 14 GewO. The offer is subject to chang ...
Built in 1997 Length conveyor belt approx. 55 m Equipment o drying tower upward o infeed left at the bottom o outfeed 270° at the top ; working condition
Skjold stone mill type H-950/I Nr. 976918, 15 kw up to 1500 rpm, stone diameter 950 mm, technically fully repaired and repainted.
Type SK1300-P6 Working width 1300 mm Min.working length 370 mm Working thickness 5-140mm Polishing roller speed - Frequency control Feeding speed 2.5-12,5 m/min Total motor power 16.87 kW
Skinetta ASK 450 Penalty Banding Machine Machine Purpose The tightening banding machines of the SKINETTA series serve the purpose of tightening individual products or several individual products with polyethylene film. banding (wrapping). In contrast to shrinking machines, the wrapping film is pulled tightly around the container before sealing. This streamlining is the main advantage of the procedure. The result is up to 20% less film consumption. A special advantage of the patented SKINETTA tightening system is the infinitely variable, fine dosing. The sealing (welding) of the film takes place in the smallest of spaces and a clean sealing seam with very small protrusions is created. By connecting a SKINETTAther or SKINETTAshrink heat cover and using a correspondingly wide film, the film protrusion protruding beyond the container can be shrunk laterally. This pre-singing m ...
Dear's Sale, SKL 6NVD 48A-2U complete Engine...………….. 2 pc Piston head close type .. 10pcs Piston head open type ... 6 pcs Conrod... 6 pcs Piston .. 6 pcs Liner ... 10pcs Cranksaft 6cyl .. 2 pc Gavarnor 2 pcs Ready for transport Best Regards Hakan KUSCU info@kscege.com
Screws and small part scoop Brand: Hammer Type: SKP-M-300 Other details: Please see photos All information without guarantee
Machine Type: SK50 Mandrel Manufacturer: KYUSHUKOGU Type: SK50 Condition: used / very good Offer will only be sent if a complete imprint is provided! Price 178,50 Euro incl. VAT and shipping within Germany. Location Warstein , Germany Reference MZ-WER-1223-1 DESCRIPTION We offer you a used alignment mandrel, see pictures. Technical data will follow. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted!
Stock number: 3291 INDUCTIONS HEATER Manufacturer: SKF, type: TIH-1000E/C650 Machine no.: 060420, year of build: 2006 Specifications: Automatic residual magnetism Max. 100 kVA Temperature control of Max 240 degree Maximum work-piece weight 2500 kg Length: 1250 mm, height: 1850 mm, width: 2870 mm, weight: 2000 kg
Product number: 2896 Type: Battermix skid Serial number: INDK12660 Year of construction: 2018 Never used, new on pallet Mixing tank Tank: 1500 litres, double jacket Mixer: high speed, 965 RPM Power: 3 x 400V, 50Hz, 4.55kW Dimensions: 1400 x 1250 x 2650 mm With Packo Inox pump, level sensor, temperature sensor and CIP Buffer tank Tank: 1500 litres, double jacket Power: 3 x 400V, 50Hz, 2.05kW Dimensions: 1250 x 1250 x 2450 mm With Packo Inox pump, level sensor, temperature sensor and CIP Circulation tank Tank: 1500 litres, double jacket Power: 3 x 400V, 50Hz, 1.5kW Dimensions: 1250 x 1250 x 2450 mm With level sensor, temperature sensor and CIP Packo Inox circulation pup Type: FP2/32-160-552 Serial number: 176593 Year of construction: 2018 Capacity: 2 m³/h Flowmeter: Endress + Hauser Flowphant T DTT31 Power: 3 x 400V, 50Hz, 5.5kW Dimensions: 450 x 800 x ...
Used Kiener Skinetta ASK 450 Overwrap / bundle machine Manufacturer: Kiener Skinetta GmbH ( Germany ) Type: ASK 450 Year: -83 / -89 Control panel Multi-tier Speed: up to 25 cycles / min. Leaflet feeding unit Infeed conveyor: 1200 mm x 180 mm Steel rod conveyor 1000 mm x 450 mm Film width: 40 - 450 mm Film material: PE,PP Sealing width: max 450 mm Sealing height: max 290 mm Power: 380 v., 5 kW Air: 6 bar Heat blower 4 pcs Overall dimensions: 1300 mm x 110 mm x 1900 mm Weight: 300 kg
Machine Type: Circular Saw Manufacturer: Kaltenbach Type: SKL 350 Year of construction:- Condition: used Offer will only be sent if a complete imprint is provided! Price 1.190 Euro incl. VAT Location Warstein , Germany Reference M-KAL-0724 DESCRIPTION We offer you a used circular saw from the manufacturer Kaltenbach. Technical data will follow. Availability: from 01.08 Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!
P187 - 3x used approx. 43 m³ / 43,000 litres polyester tank, GRP-tank, aboveground, vertically standing, flat floor, in good condition. technical details: capacity: approx. 43 m³ / 43,000 litres material: polyester tank / GRP tank manufacturer: Skoda dimensions: Ø approx. 3.00 m x height approx. 6.50 m Used tanks in good condition, by manufacturer Skoda. Upright standing storage tank with flat bottom, lid on the tank body, multiple connections, inlets and outlets. One tank is equipped with a propeller agitator on the side, functionality not yet tested by us. The container can be used as a storage tank for many different media such as water, liquid feed, fodder, whey, molasses, manure, seeping juice, rapeseed oil or as a rainwater collection tank etc. Price upon request. Transport can be arranged at low cost. It is not possible to update all our advertisem ...
We sell the Kaeser SK 25 screw compressor, as a set including compressed air tank and refrigerant dryer The condition of the compressor can be seen in the attached pictures. The unit has been well maintained and is fully functional. Operating hours: 12,324h run and 2,317h load Last inspection 09/22. Until next inspection 1,029h load Technical details: -Operational -Fully automatic - Very soundproofed - Vibration damped - All panels powder-coated - For ambient temperatures up to +45 °C - Easy access to all service points thanks to removable left cover SIGMA CONTROL 2 Specifications: - Working pressure: 7.5 bar - Flow rate: 2.50m³/min - Maximum operating pressure: 8 bar -Rated power: 15.0 kW -Engine speed: 2960 rpm -Ambient temperature: 3 °C to 45 °C
Tool holders SK30 - Approx. 60 spindle tools - Thread compensation holder - Approx. 40 collet holders Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.
W 200G with Siemens AC main motor. modernized the main drive by instalation of Siemens AC motor with SIMODRIVE 611. Original built ISO 60 taper and 630 rpm Main data: X=8000 mm Y=4150 mm Z =1600 mm W=2000 mm Spindle dia 200mm ISO 60 spindle speed max 800 rpm Accessories: DRO Philips available as original rotary table E 20 extra cost milling head IFH 1 and IV25, IFW 1, IFW2 IFW 3 NO floor plates
: 1100x1000 mm : 900 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Skoda W200H - CNC Plate Boring Machine – Bearing Sleeve (RAM) Year of construction : 1992 Electrical & Electronics Overhaul : 2021 Spindle : 200 mm ( Ø ) ISO 60 X : 7,800 mm Y : 5,400 mm W : 900 mm ( spindle ) Z : 900 mm ( Carrying sleeve / RAM 520 x 520 mm ) Z1 : 2,000 mm (table) CNC rotary table : 2500 x 2000 mm – 40 T Spindle speed : 0.8 - 800 rpm Rapid traverse speed : 6000mm/min Spindle motor : 75 kw Total power : 140 kW Machine weight : 84 T (approx.) Control : FAGOR 8055 Processing heads 3 pieces 1.Angular translation head 2. Vertical milling head 3.Horizontal milling head Base plate : 4,480 mm x 1,145mm Conveyor
machine has live spindle for drilling and grinding face plate diameter mm 800 max. workpiece diameter mm 1000 max. workpiece height mm 750 max. diameter of external working mm 1000 Z axe mm 630 face plate revolutions 1 5 – 500 rpm main motor output kW 30 (40) machine dimensions length mm 4900 height mm 3830 width mm 4485 machine weight kg 16000 machine had DRO Tesla NS 642
Center height 660 mm Distance between the centers length 12000 mm Turning diameter 1320 mm Turning max. via support 950 mm Clamping max. 1200 Power 55 KW Torque 35000 Nm Bezel I 200-630 mm Workpiece weight 21 to Accessories: Conveyor
Center height 660 mm Center width 11000 mm Turning diameter 1320 mm Turning max. via support 950 mm Power 55 KW Torque 35000 Nm Clamping max. 1200 Workpiece weight 14 to Accessories: Bezel 200-630 mm
central lubrication unit, MKU1-BW3-20015+428, SKF, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, Technical data: - Central lubrication unit, MKU1-BW3-20015+428, SKF, new - Container capacity 2.7 L - Pump 230V 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian la ...
Flat slider for drilling rig for mounting in the drilling spindle Tool holder SK50
Two unused tables from paller horizontal borer Skoda W180NC 2240x2240cm of clamping surface and the weight of one table is 6500kg
6pcs of Skoda floor plates 6400x1885x400mm pirce 12000eur/pc 4pcs of Skoda floor plates 5600x1885x400mm price 10500eur/pc 2pcs of Skoda floor plates 3200x1885x400mm price 6000eur/pc
Lot of 180 roller bearings stamps, SKF, FAG, INA , mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, An exceptional special price of €3.50 per item, excluding VAT. The original price is at least 10 to 15 times higher. We can divide the bearings into 3 groups: 1) Approx. 90 pieces in original cardboard packaging 2) Approx. 30 pieces in original foil packaging 3) Approx. 60 pieces open, unused, fully functional bearings. See stock list on photo. Minor defects of 1-2% possible. These are brand-name products only. Due to the extremely low package price, we cannot offer any guarantee/warranty in this ...
Rotary table E20 Table working surface 2000x2000mm Table height 910 mm The biggest load of the workpiece table 200000N Movement for sleigh bed 1200 mm Longitudinal feed 2,8-8-22.4 mm min-1 Circular shift on average of 2000 mm 5.8-16.4-48.1 mm min-1 Rapid longitudinal 1245 mm min-1 Rapid circular diameter of 2000 mm to 2600 mm min-1 4kW electric engine for the displacements Floor surface 3000x2765mm Table weight 9350 kg
dimensions 820x540x70 capacity 1 to daylight 2337 mm
Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collet sleeves -Clamping sleeves: 6 pieces -Recording: SK50 -Various sizes: 6-32 mm -Sale: only to be sold as a complete set -Box dimensions: 280/220/H155 mm -Weight: 13 kg
maximum number of results exceeded
please refine your search
