sk 50 used for sale

Control: Manufacture: FANUC 21-M x-travel: 1020 mm y-travel: 510 mm z-travel: 575 mm table-size: 1200 x 500 mm spindle turning speed range: 60-8000 U/min tool magazin:: 24 weight of the machine ca.: 7.5 t HEIDENHAIN TNC-426 Prepared for the 4th axis www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Wolf Power Systems Model: GTK 50E0 Year of Manufacture: 2021 Type of Machine : CHP UNIT Condition : Never used, never even connected CE Certified: Yes Technical Specifications • Engine Type: Hoeckle HMG 434 S • Generator Type: Marelli MXB-E 225 MA/4 • Fuel: Natural Gas H (Erdgas H) • Electrical Output: 50 kW • Thermal Output: 90 kW • Power Consumption: 146 kW • Gas connection pressure range: 25 to 60 mbar • Maximum operating pressure: 4 bar • Maximum coolant inlet temperature: 90 degrees C • Rated voltage: 400 VAC 3PH 50Hz • Supply fuse: 100 A • Protection class DIN VDE 0470: IP 22 Find more here - / Contact us at -

A compact Trumpf CNC laser welding station is available. Laser source: TruPulse 124, wavelength: 1064nm, max. average power: 140W, min. pulse power: 300W, max. pulse power: 6000W, pulse duration range: 0.3ms-50ms, max. pulse energy: 30J, max. pulse frequency: 833Hz, travel X/Y/Z: 450mm/300mm/300mm, travel speed: 3m/min, positioning accuracy: +/-0.1mm, repeatability: +/-0.02mm, rotary table diameter: 120mm, rotational speed: 80rpm, max. table load: 50kg, machine weight: approx. 650kg. Documentation available. An on-site inspection is possible.

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 50390 € : 952.37 € : 500 mm : 1500 mm : 250 mm : 75 mm : 300 mm : 400 mm : 8 : 80 MK : 3 : 25-100, 100-400, 500-2000 U/Min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 0.5 - 120 mm : 60-1/4 Gänge/ : 0.125 - 30 : 240-1 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 11 kW : 3100 mm : 1250 mm : 1400 mm : 2800 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS:  ...

Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. control: Memory-Funktion Weinig Powermat 500 with grooved table ---------------------------------- The machine arrives at the warehouse and is cleaned and fully inspected. Brief Summary: ---------------------------------- - 5 Spindles - 8,000 rpm - Grooved table for short or difficult-to-guide workpieces, coated with Marathon PowerCoating - One driven roller in the outfeed table, hardened: 210 mm wide - Left and top spindles controlled for width and height - Quick-release spindle nut Detailed Description: ---------------------------------------------------------------------- - Technical Data: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 5 1st Spindle - bottom ----------------------------------------------- Motor with ...

Wickert high-precision hydraulic press WKP 5000 S with sliding table. Total pressing force 5000 kN. Table size 1800 x 1200 mm, installation height min 800 mm, installation height max. 2300 mm. Opening stroke 1500 mm. Sliding table extendable 1500 mm. Year of construction 2011 very good condition. available from week 22/2026.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A used Universum cone winder and pretzel roller is currently for sale and immediately available in our warehouse in Bielefeld. Universum Cone Wrapper / Pretzel Long Roller Type: LWT 3/80 Prem-50J-EB2W/40 More information and pictures on request.

: neu : 2026 : 070152 : prompt, Zwischenverkauf v : Türkei : 4800 € : 1 : 500 kg : 1200 mm : 400 mm : 550 mm : 300 mm : 50 mm : 80 mm : 0.55 kW : 1400 mm : 1200 mm : 1550 mm : 190 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (prices on request): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Absolutely new belt dryer make New Eco Tec Woody 500-100-1.0 SP, built in 2019. Very well preserved, as good as new facility. Immediately available. Suitable for drying fines up to 1.5 to/h. Input moisture up to 50%. Water evaporation up to 500 kg/h! Heating medium warm air 90°C to 110°C. Takeover possible immediately!

Key data: 800 KW, 400 V

CHP Power Plant 800 kWe with 2xMWM TCG 2016V08 Gas Gensets Good condition and low operating hour 800 kWe / 400 V / 50 Hz combined heat and power (CHP) plant running on natural gas or biogas. The plant was delivered by MWM in 2011 and it operation was closed in 2021. Thermal energy is in form of hot water at 90°C and currently used for district heating purpose. Due to the low amount of biogas, cogeneration plant worked at low capacity (30-40%), and not around the clock. It has a complete gas treatment and mixing system to utilize biogas from landfilling which has 40 – 55 % of CH4. Power generators are installed in two soundproof containers, TEAM Evo WMW power plant control system and all electric switches and control cabinets are installed in separate control room. Heat recovery system is built next to genset containers. Both units have separate cooling radiators for engine cooling ...

Highest sheet capacity at 400 N/mm2 x 1000x2 16 A plug Length 1.30 m Width 0.4 m Height 1.30 m Weight 250 kg Tools

CRAMMED FEEDING UNIT, reconditioned, This unit can be synchronized to feeding screw from buffer silo and horizontal screw in extruder to grant a uniform, continuous feeding, for light scraps, mounted on a 130 mm extrusion line, totally reconditioned, possible addition of mastebatch feeder, availability: in stock, conditions: reconditioned, type: for up to 700 kg/h extruders

DECOILER   design: twin reel   coil weight max.: 0.5 to   max. diameter of coil: 1600 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 1500 mm   space requirements -front/back-: 2100 mm   total height: 2200 mm   total weight approx.: 1570 kg - Double reel - Load capacity 1600 kg - Spreading range 270 - 550 mm - max. sheet width 150 mm - 3 pressure arms - Speed approx. 20 m/min

Trumpf TruBend Cell 5000Year of manuf. : 2018 Control : ____________Description:Technical dataYear of manufacture:2018Pressing force approx.:3200 kNFolding length approx.:4420 mmControl system:TASC 6000Projection:420 mmFree upright clearance approx.:3680 mmUsable installation height approx.:615 mmMachine weight approx.:23400 kgEquipment:- Sturdy machine frame:- Press beam, stress relieved with high bending strength:- Spherical bearing of the press beam (inclined position):- Electro-hydraulic top drive with 4-cylinder technology:- Optical set-up and positioning aid:- Generous edge clearance:- Flat front covers:- Block hydraulics:- Electronic pressure compensator:- Measuring system with glass scale and deflection compensation:- Hydraulic oil in the machine (lifetime lubrication):- Oil cooler:- Control cabinet cooling via air-to-air heat exchanger:- Modern machine designExtended equi ...

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 7730 € : 149.19 € : 500 kg : 150 mm : 150 mm : 360 kgm : 230 / 50 V / Hz : 0.37 kW : 0.37 kW : 0.1 - 3 U/min : 45 s : 800 mm : M20X6 mm : 640 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating ...

Key data: 5000 kN, 80 mm

SANDRETTO 500 T Series 7 Type: 3270/500 Clamping Force: 500 T Screw Diameter: 80 mm Theoretical Injection Volume: 2110 cm³ Injection Weight (PS): 2050 g Screw Working Length (L/D): 20 m Plasticizing Capacity: 290 kg/h Heating Zones: 4 Total Heating Power: 31 kW Mold Thickness (Min/Max): 250-800 mm Opening Stroke (Platen Travel): 830 mm Distance Between tiebars: 720 x 720 mm Oil Tank Capacity: 500 L Dimensions: 9.0 x 1.80 x 2.50 m Total Weight: 25,000 kg

Lippert belt conveyor GF 5030-570-450 RA2496 Technical data: Conveyor length (NL): 5030 mm frame width (NB): 570 mm, 770 mm with motor belt width (GuB): 450 mm Overall height (BH): 130 mm Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 5030 Nominal / outside width in mm: 570 Belt width in mm: 450 Driven: YES Engine type: SEW Movi-Mot KW: 1,1/S1 Conveyor speed m / s: freely adjustable scope of delivery: without supports and side guides For individual, professio ...

Year: 2017 - technically efficient, ready to work – after full service - split heads - pneumatic drive - maximum profile height: 160 mm - resistance unit lowered under the table - hydraulic lock for reversing the resistance unit

Diesel Generators 1600 kWe / 50Hz with CAT 3516B engines and local control panel We have multiple identical CAT 3516B skid-mounted diesel generating sets available, all manufactured in 2018 and installed in the same HFO power plant, complete with full HFO plant auxiliaries. Each engine is coupled to a 2000 kVA / 415 V / 50 Hz brushless synchronous alternator via a flexible coupling, both mounted on a rigid base frame. These units are optimized for low emissions, high efficiency, and continuous base load operation. The generators have been serviced exclusively by the local CAT dealer and have only 1,500–2,000 operating hours. The standard scope of supply includes: • Engine control panel (EMCP 4) • 24V electric starting system • Radiator cooler Balance of Plant (BOP) equipment is available for customers requiring multiple units. Technical data Engine type CAT  ...

Stock number: 4029 Suction Manufacturer: 3NINE LINA, Type: LINA 500 Oilmist Separator Machine NO.: LI500-65-CC-543, Year of manufacture: 2006 Specifications: Fence effect 500m3/hour m/3 Motor power 0.55 Kw Cleaning oil mist (cutting fluid/coolant) Min./max Degree 5-50 Degree Height: 840 mm, Width: Dia. 480 mm, Weight: 30 kg

Gas forklift built in 2018 in technically and visually very good condition. Technical highlights: Load capacity: 5,000 kg Mast: 5.2 meters triplex (3-fold) with free lift 4-way control block Joystick hydraulic control Factory steel cab with heating Work lights Very good solid rubber tires 4 fork extensions (MEYER 6-5409N) Further data: Engine power: 80.2 hp (59 kW) Drive: Hydrostatic Hours: 1,863 h Weight: 7,350 kg Tyres: 4 wheels

Transnorm belt conveyor GF 4365-600-500 RA2493 Technical data: Conveyor length (NL): 4365 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm belt return roller: Ø = 45 mm Year of manufacture: 2014 Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 4365 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Ampere: 1,30 Co ...

Transnorm Rising falling Incline belt conveyor with leading belt GF 800+4650+560-600-500 RA2494 Technical data: Conveyor length (NL): 6100 mm ( 560 mm arch + 4650 mm riser segment + 800 mm leading ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Conveying length in mm: 6100 ( 8 ...

; Power [PS]: 680; Gross weight [kg]: 14240; Engine: Battery System: LIFePO4; Accessories: Tanker, Control Panel, Wiring port: L1, L2, L3, N, PE, Power Input: , - AC socket: 3P/5W, 1x500kW, 5x16kW , - AC copper: 3P/4W, 500kW , - DC socket: 110kW, Power Output: , - AC socket: 3P/5W, 1x500kW , - AC socket: 1P, 1x16A; 3P, 1x32A , - AC copper: 3P/4

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 44400 € : 848.04 € : 500 mm : 1500 mm : 250 mm : 80 mm : 300 mm : 400 mm : 8 : 80 MK : 21 : 20-2000 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 64 : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 240 - 1 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 7,5 kW : 3100 mm : 1250 mm : 1400 mm : 2820 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.000 mm € 43 420,00 turning length2.000 mm ...

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 500 to : 500 mm : 5.000 x 2.550 mm : 700 mm : 18 mm/s : 3 mm/s : 5000 mm : 5000 mm : 3000 mm : 32000 kg : horizontal verschiebbar : 2550 mm : 1.700 mm : 3.600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...

· Krones Monobloc VK2V 066-103/KK, serial number K090031, built in 1999, capacity 24,000 bottles per hour. · Krones labeller, model 720-18-86-130, serial number K090-C31, built in 1999, output 28,000 bottles per hour. · ZM Jerzy Robak, rinser, model PBSz-01-60, serial number 3.184, year of construction 2014. · Fischer pasteurizer, model 10Pl, serial number 99096, year of manufacture 1999. · Krones crate washer, model KKW-50, serial number 690-095, built in 1995. · Krones crate packer and unpacker, model Linapac, serial number K462-137, built in 1999. · Krones bottle washer, model KES-1-1-190/19-80, serial number 671-214, built in 1998, capacity 28,000 bottles per hour. · Krones conveyor belts with associated control cabinets and control panels

Key data: 1800 KW, 2240 kVA, 415 V

Diesel Generator 5 x CAT 3516B 2000 kVA / 50 Hz – 2023 Never Installed Never installed, surplus CAT 3516B skid mounted diesel generating sets. Engine is coupled with 2000 kVA / 415 V / 50 Hz Leroy Sommer DSG 74L1 brushless synchronous alternator with a flexible coupling, and both mounted on a rigid base frame. These units are designed for standby and prime duty. Main engine control panel EMCP, 24V electric starting system. Technical data Engine type CAT 3516B – 16-cylinder, 1500 rpm diesel engine Alternator Leroy Sommer 2000 kVA / 415V / 50Hz Power factor 0.8 Manufacturing year 2023 Operating hours Zero, never installed Number of units available 5 pcs Prime rating 2000 kVA (1600 kW) Stand by rating 2240 kVA (1800 kW) Control system EMCP 4.2

Overview  This vacuum filler was built in 1998 by Italian manufacturer GAI. In 2024 the machine was fully refurbished and is available immediately.   Technical Details    Effective Capacity: approx. 4,500-5,000 bottles/hour  Machine equipped for the following bottle formats: Bordeaux 75cl (diameter 78mm) - Burgundy 75 - 37.5cl - Magnums  Rinser with 20 clamps, inspected  Filler with 20 taps and vacuum system (new turbine) - taps inspected, new gaskets. New seating springs.  AROL Saturno Capper with 4 heads and vacuum - semi-new jaws in perfect condition - new vacuum pump and circuit  New wine inlet solenoid valve  Plug for feed pump  Machine newly refurbished (solenoid valve, jaws, vacuum turbine, gaskets, vacuum pump)  Electrical supply: 400 Volts / 50 Hz, 3 phases  Dimensions:  Long 380cm x Wide 140cm x High 250cm  Weight: 3500 kg   

These 4-axis Starrag Heckert HEC 500 H/V were manufactured in 2008 and 2009. They features a swivelling head configuration, with an X-axis travel of 800 mm, Y-axis travel of 800 mm, and Z-axis travel of 680 mm. The second machine features a swivelling head configuration, with an X-axis travel of 800 mm, Y-axis travel of 650 mm, and Z-axis travel of 680 mm. The machines include a pallet size of 500 x 500 mm and a maximum load per pallet of 1000 kg. If you are looking to get high-quality machining capabilities, consider these Starrag Heckert HEC 500 H/V horizontal machining centres we have for sale. Contact us for further details.

Overview  The Gesete XT 500 bottle drying system was manufactured in 2014 and is designed for drying bottles upstream of a labeling machine (Etima). It removes residual moisture to ensure good label adhesion. Technical details Manufacturer: Gesete Model: XT 500 Year of manufacture: 2014 Application: Bottle drying before labeling (Etima)

: neu : ca. 6-8 Wochen ab Auftrag : Polen : 26880 € : 513.41 € : 1 : 1 : 30 mm : 60 ° : 500-2920 U/min : 50 - 150 m/min : 3 mm/min : 100 mm : 7.5 kW : 1216 mm : 1275 mm : 850 kg continuous adjustment of spindle speed and feed rate make it suitable for different types of steel and aluminum high speed rotary milling head equipped with 10 inserts cutting inserts for various materials 3D contact wheel control for proper workpiece alignment ergonomic ball roller bench swarf drawer BASIC SET: SBM-500 stationary bevelling machine set of tools user manual in ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used lathe with numerical control HEIDENHEIM PLUS Basic parameters: Diameter: 490 mm, Length 1000 mm Max. diameter over cross slide 280 mm Bed width: 350 mm Spindle bore 65 mm Main motor 12/16 kW Max. speed 2500 /min Feed range 0.01 - 3 mm/rev. Quill stroke 160 mm Quill bore 70 mm Dimensions 2800 x 1800 x 1400 mm Weight 3.2 tons

General SKU049C230 MakeHaagen & Rinau Bremen TypeHSM-50 K No.8803827 Year of construction1989 LocationBarneveld Pressure Working pressure0 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume65 Ltr. Motor24 KW Specified Features - Paddle dryer Turbulent dryerHochleistungs-Wirbel-Schnellkneter (1x) Capacity65 l (useful 18-42 l) Trough sizesø 420 x 460 mm Manholecheckinspection hatch 345 x 195 mm Outlet250 x 190 mm With jacketcheck 13 l Max. temperature100°C. Motor24,0 kW, 380 Volt (Ex) With variable speed drivecheck MaterialStainless steel 1.4571 (316Ti) Information With switchgearcheck Floorspace3,0 x 1,0 m Total height1,9 m Weight1900 kg ATEX compatiblecheckCatalysts & fillersFeed additivesDiscountOther pharmaceuticsCosmeticsSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmace ...

General SKU266U441 MakeBioengineering TypeLP351 No.D574 Year of construction1988 Mounted on legscheck Pressure Working pressure2.5 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume50 Ltr. Motor4.9 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity50 Ltr. (max. 75 Ltr.) Vessel sizesdia. 345x870 mm Dished bottomcheck Top connectionsdia. 80mm, 20mm (7x) Outletdia. 20 mm With jacketcheck 15 Ltr. Max. temperature150 °C With propellor stirrercheck (double) Rushton-turbine Motor4,9 kW, 260 volt, 3250 rpm Speed mixing shaft1083 rpm Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information LocationBarneveld With switchcheck With switchgearcheck (as is) Floorspace0,8x0,85 m Total height1,9 m Weight450 + 220 + 210 kg Extra SpecificationsThis is a st ...

General SKU288N443 MakeConstructiebedrijf Verkouille No.A9673 Year of construction1997 Mounted on legscheck Pressure Working pressure3 Bar Working pressure jacket8 Bar Main Features MaterialStainless steel Volume5000 Ltr. Motor2.2 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4401 (316) Stainless Steel Reactors Reactorcheck Capacity5000 Ltr Vessel sizesdia.1700mm x2200mm Dished bottomcheck Dished top sidecheck Manholedia.500mm, dia.200mm Top connections(2x)dia.100mm, dia.80mm, dia.25mm Outletdia.80mm Half coil jacketedcheck With paddle stirrercheck Motor2,2 KW, 230/400 Volt (EExd II) Information LocationBarneveld Floorspace2,0x1,8 M Total height+/- 4,5 M Weight3250 KGCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoSolid pharmaceuticsDyes & pigmentsAPIMinerals & inorganicPlastic &  ...

General SKU201P110 LocationBarneveld MakeAlfred Bolz Gmbh&Co. KG TypeMF 500 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket3 Bar Technical specs Max. temperature100 °C Main Features MaterialStainless steel Volume11000 Ltr. Motor15 KW Specified Features - Conical dryer Conical dryercheck Capacity11000 Ltr (5000 Ltr nett capacity) Largest cone diameter2687mm Cone height4400mm Dished topcheck ManholeDN600 Stainless steel armwith mechanical seals Top drivecheck Motorscrew, 15,0 kW, 380 Volt (Ex) Motorarm, 1,35 Kw, 220/380 Volt (Ex) Bottom bearing pintle bearingcheck With jacketcheck (1100 Ltr.) Max. temperature100°C. Outlet with sliding valvecheck MaterialStainless steel 1.4404 (316L) Information Mach.No.WK 109923A / WK 340369 Year of construction1988 Floorspace3,1x3,0 M Total height5,5 M Weight+/- 7000 KGCatalysts & fillersF ...

General SKU253N183 MakeJohann Kreuziger Maschinenfabrik TypeRDH 500 RERE No.21159 Year of construction1986 LocationBarneveld Pressure Working pressure0 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume450 Ltr. Motor80 KW Specified Features - Planetary mixer Planetary mixercheck 1 Mixing/kneading shaftmixer arm and dissolver disc With scrapercheck Motor57 kW (mixer): 20 kW (dissolver) With variable speed drivecheck With gear boxcheck With panø 950 x 650 mm (on wheels) Capacity450 l Outlet75 mm With hydraulic liftingcheck (3,6 kW) MaterialStainless steel Information With switchgearcheck (as is) Floorspace3,6 x 1,8 m Total height3,4 m Weight6000 kgCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicOther chemicalPlanetary mixersFine chemicalsOintmentsPaints & coatings ...

General SKU361T1082 MakeFerrum LocationBarneveld CEcheck TypeDSZ-OR/T 1000/500 Main Features MaterialStainless steel Motor11 KW Inlet diameter50 mm Specified Features - Basket centrifuge Basket centrifugecheck Rubber linedhallar chamber Perforated basketcheck Capacity200 Ltr. Basket sizesDia 1000x500 mm Max. loading weight250 kg Hydraulic operatedcheck Liquid outletDia. 100 mm With hydraulic unitcheck Wandfluh HN10-6nvh, motor: 0,75 kW, 230/400 volt, 1380 rpm Motor11kW, 400/690 volt, 1475 rpm Max. basket speed1200 rpm MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) Information No.414-092 396 Year of construction2001 Mounted on foundation platecheck Floorspace1,8x2,2 m Total height1,7 m Weight2400 kg ATEX compatiblecheck Extra SpecificationsRevised machine! Including: new motor, pulleys, belts, shaft seal, and bearings. Filter area 1.57 m². C ...

General SKU040Z169 MakeHaagen & Rinau / Unimix TypeSH-500 No.301166/2 Year of construction2002 LocationBarneveld Main Features MaterialStainless steel Motor22 KW Rotor150 mm Specified Features - Inline mixer MaterialStainless steel 1.4306 (304L) Continuous reactorcheck In-line homogeniser Rotor sizesø 150 x 150 mm Inlet120 mm Outlet75 mm Number of stages:3 Capacitymax. 36 m3/h With mechanical sealcheck Motor22,0 KW, 400 Volt With frequency controllercheck Rotor speed2900 rpm Information With switchcheck With switchgearcheck Floorspace0,8 x 0,5 m Total height0,5 m Weight300 kg CEcheck Extra Specifications- mirror polished rotor and stator - stator with mechanical seal DiscountInline high shear mixersHaagen & RinauDiscountMixers > Inline high shear mixersBrand > Haagen & Rinau What you can expect from Foeth: -- Machine is in working condition -- At a reduced ...

General SKU011Y102 MakeMirodur SpA. Aprilia TypeTurbomill 50HP No.128 Year of construction1992 LocationBarneveld Main Features MaterialStainless steel Volume10 Ltr. Motor37 KW Specified Features - Sand mill Vertical sandmillImmersion mill (1x) Capacitybasket 10 Ltr, Basket dia. 430mm Motorhydraulic drive unit 37,0 KW, 380/660 Volt MaterialStainless steel Information With switchgearcheck Floorspacemill 2,4x0,8 M Total heightmill 2,7 M Extra Specifications- Dim. hydraulic unit: 2,3x0,8x1,3 Mtr (LxWxH) - Shaft length ± 1150mm (incl. basket) - Distance between shaft and frame ± 700mm DiscountSand millsMirodur SpaDiscountMills > Sand millsBrand > Mirodur Spa What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The ...

General SKU360S873 LocationBarneveld MakeTrennso Technik (D) TypeSIK 500-1200-2-O No.0600117 Main Features MaterialMild steel Surface0.5 m2 Size length1200 mm Sizes width440 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0,5 m2 Number of sieve decks:2 Sieve sizes440x1200mm Inlet190x190mm Outletdia 200mm (2x), dia. 250mm (1x) Drive excentercheck Motor0,75 kW 220-240/380-420 volt Sieve perforationdia. 10mm, 1x1mm With ball cleaningcheck MaterialMild steel Information Year of construction2011 Mounted on mild steel framecheck With switchcheck Floor space2,1x1,3 M Total height2,3 M Weight950 KgFeed additivesPaper & otherOther pharmaceuticsOrganicsE-waste & metalSugarAnimal feedOther feedSolid pharmaceuticsPlastic & rubberMinerals & inorganicPlastic & polymersRubberOther chemicalStarchVibro sievesGeneric medicinesPowdered foodsConsumer wasteTren ...

General SKU042Y538 MakeStilmas TypePSG-500 DTS No.3797/86 Year of construction1986 Mounted on framecheck Pressure Working pressure10 Bar Working pressure jacket10 Bar Working pressure tubes6 Bar Main Features Capacity1.35 Ltr./Hr. Specified Features - Distillation Distillation installationcheck Pure Steam Generator Vessel sizesø 320 x 1800: ø 280 x 1300 mm Number of columns:2 Electric heatedcheck MaterialStainless steel 1.4401 (316) Information LocationBarneveld With switchgearcheck Floorspace1,5 x 0,7 m Total height2,7 m Weight600 kg Extra SpecificationsStilmas Pure Steam Generator type PSG-500 DTS produces saturated, dry, pyrogen-free pure steam, used as heating fluid for industrial systems. Pure steam production: adjustable (operating range stated) up to 8 bar. Steam consumption (heating steam to pure steam): 1.35 kg/kg of pure steam. DiscountDistillation ...

General SKU274P408 LocationBarneveld MakeHellmich Behälter- und Apparatebau (DE) No.4973 Pressure Working pressure6 Bar Working pressure jacket2.5 Bar Main Features MaterialStainless steel Volume10500 Ltr. Motor15 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4541 (321) Stainless Steel Reactors Reactorcheck Capacity13300 Ltr (netto ±10.500 Ltr.) Vessel sizesdia.2300mm x2700mm Dished bottomcheck Dished top sidecheck Manholedia.500mm Top connections(8x)dia.80mm, (3x)dia.50mm, dia.100mm Outletdia.100mm Half coil jacketed(488 Ltr) Max. temperature120°C. With paddle stirrertype FGRLR-80D Motor15 KW, 290/500 Volt Speed mixing shaft59 rpm Information Year of construction1998 Mounted on legscheck Floorspace2,6x2,6 m Total height5,5 m Weight6000 kgCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceu ...

General SKU056C286 MakeGlatt AG Pratteln Switzerland TypeGC-490/500/600/750 No.101.196 Year of construction1994, Alterations in 2004 (Ref. 601.196-02) LocationBarneveld Main Features MaterialStainless steel Motor1.5 KW Inlet diameter750 mm Specified Features - Coating pan MaterialStainless steel 1.4435 (316L) Coating installationDrum coater with 7 drums (1x) Capacity5,6/11/21/51 Ltr Pan diameter490/500/600/750mm Motor1,5 KW, 400 Volt (Ex) With frequency controllercheck Pan speed± 2-20 Rpm With steam heatingcheck (84 KG/Hr), Steam boiler is not included With fancheck (2x, Intake and exhaust air) Capacity1200 m3/Hr Motor5,3 KW, 400/690 Volt + 1,5 KW, 400 Volt With spraying armcheck (2x), Dosing pump is missing Information With switchgear/air handling unit Floorspace2,5x1,7 m Total height2,2 m ATEX compatiblecheck Extra Specifications- Number of drums: 2x dia. ...

General SKU356S847 MakeEnco Energie Componenten GmbH (AT) LocationBarneveld Type509 ltr Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume509 Ltr. Motor0.55 KW Pressure6 Bar Vacuumcheck Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4571 (316Ti) Stainless Steel Reactors Reactorcheck Capacity509 Ltr. Vessel sizesdia.800 x900mm Dished bottomcheck Dished top sidecheck ManholeHand hole DN200 Top connectionsDN125, DN100, (3x)DN80, DN50 OutletDN80 Half coil jacketed(64 lLtr.) Max. temperature-29/160 Degr.C, With propellor stirrercheck Motor0.55 kW 230/400 volt (Ex) Speed mixing shaft356 Rpm Notified body(Tuv) Capacity509 Ltr Vessel sizesdia.800 x900mm Dished bottomcheck With covercheck ManholeDN200 Top connectionsDN125, DN100, (3 ...

General SKU201P111 MakeAlfred Bolz Gmbh&Co. KG TypeMF 500 Mach.No.M1180 Year of construction1988 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket3 Bar Technical specs Max. temperature100 °C Main Features MaterialStainless steel Volume11000 Ltr. Motor15 KW Specified Features - Conical dryer Conical dryercheck Capacity5000 Ltr. (max. 11000 Ltr.) Largest cone diameter2687mm Cone height4400mm Dished topcheck ManholeDN600 Stainless steel armcheck (with mechanical seals) Top drivecheck Motorarm: 1,5 kW (Ex): screw: 16 kW (Ex) Bottom bearing pintle bearingcheck With jacketcheck (1100 Ltr.) Max. temperature100 °C Outlet with sliding valvecheck MaterialStainless steel 1.4404 (316L) Information LocationBarneveld Floorspace3,1x3,0 m Total height5,5 m Weight± 7000 kgCatalysts & fillersFeed additivesPaper & otherOther pharmaceuticsSuga ...

General SKU122N606 MakeNetzsch TypeLMJ 2 (506.02) No.204 842 Year of construction1983 LocationBarneveld Material Housing materialStainless steel Main Features MaterialStainless steel Volume2.5 Ltr. Motor4 KW Specified Features - Sand mill MaterialStainless steel Horizontal sand mill(1x) Capacity2,5 Ltr. With jacketcheck Motor± 4 KW, Ex With variable speed drivecheck Capacity5-50 Ltr./Hr. With pumpcheck Motor0,25 KW Information With switchgear(0,6x0,3x0,9 M) Floorspace1,1x0,8 M Total height1,5 MDiscountSand millsNetzschDiscountMills > Sand millsBrand > Netzsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Manufacturer: Gurki Model: GPS-5030LW Year of Manufacture: 2021 Type of Machine : Angle welding machine Frequency: 50 Hz Phase: 3 Power: 15 kW CE Certified Find more here - / Contact us at -