sk 50 used for sale

chamber volume: 170 liter useable volume: -- liter friction: -- motor drive power: 800 kW Condition: used - Specification: internal mixer used as additional option: Rubicon batch-off plant - capacity approx.: 170 litres - rotor model: tangential design - drive controller: Allen Breadley - Control: Mitsubishi - Motor speed: 1,000 rpm - Gearbox: Panamax 9000 make Sumitomo - Rotor speed: 5.6 - 55.6 rpm - Chamber hardness: 45 -50 HRC - Motor: 800 kW - 1000 rpm - 380 V, 50 Hz - Moror make: Teco - Output: 27 tons/day - Cycle time approx.: 4 - 8 min - Height approx.: 7,500 mm - Weight approx.: 35,000 kg, incl. gearbox and motor Available as an option: - Batch-off system Make: Rubikon / Mattech - Cooling bars max.: 300 mm / 2x 80 mm The data for this ad was created with ModulMWS - the software solution  ...

Diesel particle filter cleaner, diesel particle cleaner, particle cleaner, particle filter -Air heater: Leister type 8D5 -Power: Air heater 5000 1x380-440V~ 7500-10000W max.23A -Side channel compressor -Quantity: 2 pieces of soot filter regenerator available -Price: piece

Combi sheeter Seewer Rondo SKO68 Seewer Rondo SKO 68 Sheeter - Seewer Rondo dough sheeter - with 2 bands - right left rotation -left strap extendable -Hinged straps - mobile on wheels - Machine is functionally tested and cleaned

Tool holder, milling holder, milling tool -Number: 8x SK40 holders -1x: Tapping chuck, compensating chuck -35: Mount MK2, compensating chuck -suitable for: tool changer -Sale: only complete -Weight: 58 kg

Tool holder, milling holder, milling tool -Number: 4x holder SK40 -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -is only sold complete -Weight: 5 kg

Tool holder, milling tool holder -Number: 6x SK50 recording -various versions -Ø 56 x 110 mm -Ø 46 x 130 mm -Ø 52 x 90 mm -Ø 42 x 80 mm -Ø 42 x 55 mm -Ø 32 x 60 mm -End milling cutter -Price/Sale: complete -Total weight: 24 kg

Tool holder, milling tool holder -Number: 13x SK50 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -only sold as a complete set -Weight: 54 kg

Tool holder, milling holder, milling tool -Number: 17x SK50 mounts -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -is only sold complete -Weight: 70 kg

Tool holder, milling tool holder -Number: 9x SK30 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -with transport box -Price/Sale: complete -Weight: 10 kg

Inv. Num. : 6637 Type: SRM 125-4000 Producer: Škoda Generated: Parameters: Control system: SIEMENS SINUMERIK 828 D Maximum turning length: 4000 mm Maximum turning diameter over bed: 1250 mm Maximum turning diameter over support: 900 mm Maximum workpiece weight: 14000 kg Turning diameter: 1030 mm Travel speed of the Z-axis and X-axis: 2000 mm/min Rapid traverse X: 3000 mm/min Rapid traverse Z: 6000 mm/min Equipment: Feed drives Siemens DRO Heidenhain

Tool holder, milling tool holder -Number: 4x SK40 recording -various versions -Collet: Ø 8/10/12/20 mm -Sale/Price: complete -Weight: 4 kg

We have for sale milling and borig heads for Skoda HBM IV25, IR100, IFW1, IFW2, IFW3, IFH, IOT steady rest for W200 price from 1000-5000eur

milling device for Skoda lathe SUT160

Manafacture: Skoda Type: E25OB23941 Year: 1989 Part weight: up to 25t Dimensions: 2,000 x 2,000 mm electr. adjustable Weight: 10t

1 boring mill turntable Make: Skoda Model: S 60 Year of construction: 1987 Table size: 4000 x 3600 mm Table load: 60 tons. Rotatable. 360 degrees Longitudinal travel: 1100 mm Weight: 38 to.

2 clamping brackets Dimensions: 3000 x 1200 mm

Tool holder, milling tool holder -Number: 14x SK50 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Price/Sale: complete -Dimensions: 800/320/H540 mm -Weight: 58 kg

Tool holder, milling tool holder -Number: 8x SK50 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -only sold as a complete set -Weight: 26 kg

Tool holder, milling tool holder -Number: 14x SK50 recording -Tool holder: Ø 36 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Price/Sale: complete -Dimensions: 800/315/H650 mm -Weight: 62 kg

Tool holder, milling tool holder -Number: 14x SK50 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Price/Sale: complete -Dimensions: 800/315/H740 mm -Weight: 66 kg

Tool carrier for SK 30 holders -made of: polypropylene copolymer -Impact and scratch resistant, insensitive to heat -resistant to: mineral oil and various chemicals -Price: complete

Tool holder for SK 40 chucks -made from: Polypropylene copolymer Impact and scratch resistant, heat resistant -resistant to: mineral oil and various chemicals Price: complete

Card holder for Eurocard, screw terminal -Connection type: 4 mm² solid wire -Mounting type: snap-on to mounting rail (EN 60715) or screw-on -Quantity: 6 available -Price: per piece -Dimensions: 137/60/H160 mm -Weight: 0.24 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Flat gear -Speed: 120 rpm -Power: 1.5 kW -Construction: B3 -Hollow shaft: Ø 30 x 120 mm -Protection class: IP 54 -Dimensions: 410/290/H215 mm -Weight: 29 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 6.5 rpm -Power: 0.12 kW -Diameter shaft: Ø 25 mm -Brake: 4 Nm -Construction: B3 -Protection class: IP 54 -Dimensions: 480/184/H205 mm -Weight: 21 kg

Gear motor, electric motor -Speed: 114 rpm -Power: 0.75 kW -Construction: B3 angle -Diameter shaft: Ø 20 mm -Protection class: IP 65 -Price: per piece -Number: 2x available -Dimensions: 430/230/H185 mm -Weight: 18.7 kg

Electric motor, three-phase motor -Power: 0.37 kW -Speed: 1380 rpm -Shaft diameter: 14 mm -Construction: B14G -Protection class: IP 54 -Number: 11x motors available -Price: per piece -Dimensions: 240/160/H185 mm -Weight: 6.2 kg

Gear motor, electric motor -Speed: 120 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 370/215/H170 mm -Weight: 13.1 kg

Tool holder, milling holder, milling tool -Number: 2x SK40 holders -Adapter -Take: SK40 -1x mounting tool: Ø 13 x 22 mm -1x mounting tool: Ø 27 x 55 mm -suitable for: tool changer -Sale: only complete -Weight: 3.4 kg

Tool holder, milling holder, milling tool -Number: 2x SK45 holders -Inside mount: Ø 36 x 90 mm -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for: tool changer -Sale: only complete -Weight: 5.4 kg

Tool holder, milling holder, milling tool -Number: 2x SK45 holders -1x recording inside: Ø 28 mm -1x recording outside: Ø 40 mm -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for: tool changer -Sale: only complete -Weight: 4.5 kg

Gear motor, electric motor -Speed: 18.4 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Dimensions: 360/175/H170 mm -Weight: 13.1 kg

Gear motor, electric motor, three-phase motor -Speeds: 119 rpm -Power: 0.12 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: -Dimensions: 340/180/H170 mm -Weight: 11.6 kg

Tool holder, milling holder, milling tool -Number: 2x SK50 holders -Adapter -Adjustment: SK50 -1x tool holder: MK3 -1x tool holder: Ø 20 mm and with CNC pull studs -suitable for: tool changer -Sale: only complete -Weight: 6 kg

Gear motor, electric motor, three-phase motor -Speed: 12.1 rpm -Power: 0.04 kW -Construction: B14 -Diameter shaft: 16 mm -Protection class: IP 44 -Dimensions: 310/110/H155 mm -Weight: 7.7 kg

Tool holder, milling holder, milling tool -Number: 2x SK50 holders -Adapter -Adjustment: SK50 -Tool holder: MK3 -Total length: mm -Sale: only complete -Weight: 4.8 kg

Tool holder, milling holder, milling tool -Number: 5x SK50 holders -different recording sizes see pictures -Reducing sleeves, cutter head, shell end mill -Sale: only complete -Weight: 19.7 kg

Tool holder, milling holder, milling tool -Number: 7x SK50 holders -different recording sizes see pictures -Reducing sleeves, cutter head, shell end mill -Sale: only complete -Weight: 28 kg

Gear motor, electric motor, electric gear motor -Speed: 50 rpm -Power: 0.37 kW -Construction: B14 angle -Diameter hollow shaft: 25 mm -Protection class: IP 55 -Number: 1x motors available -Price: per piece -Dimensions: 330/180/H170 mm -Weight: 11 kg/piece

Gear motor, electric motor -Speed: 18 rpm -Power: 0.18 kW -Construction: B3/5 angle -Shaft diameter: Ø 12 mm -Protection class: IP 55 -Dimensions: 290/130/H170 mm -Weight: 5.7 kg

Gear motor, electric motor, three-phase motor -Speeds: 120 rpm -Power: 0.12 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Dimensions: 335/175/H180 mm -Weight: 11.1 kg

Gear motor, electric motor, electric gear motor -Speed: 50 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 430/140/H200 mm -Weight: 13.2 kg/piece

Gear motor, electric motor, electric gear motor -Speed: 95/190 rpm -Power: 0.3/0.43 kW -Diameter shaft: Ø 20 mm -Construction: B3 -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 360/185/H175 mm -Weight: 13.2 kg

Gear motor, electric motor, three-phase motor -Speeds: 119 rpm -Power: 0.09 kW -Construction: B5 -Diameter shaft: Ø 20 mm -IP protection -Number: 1x motors available -Price: per piece -Dimensions: 355/165/H190 mm -Weight: 11.5 kg/piece

Gear motor, electric motor -Speed: 107 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Number: 2x motor available -Price: per piece -Dimensions: 360/170/H170 mm -Weight: 13.7 kg

Tool holder, milling holder, milling tool -Number: 2x adapter mounts SK50/SK45 -Number: 22x SK45 holders -different designs -Drill chucks, flat chucks, reducing sleeves, cutter heads, shell end mills -Sale: only complete -Weight: 90.2 kg

geared motor, electric motor -Speed: 133 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 20 mm -Protection class: IP 44 -Dimensions: 370/200/H185 mm -Weight: 13.4 kg

Geared motor, electric motor, electric geared motor -Speed: 70 rpm -Power: 0.12 kW -Shaft diameter: Ø 20 mm -Design: B3 angle -Protection class: IP 54 -Dimensions: 305/170/H140 mm -Weight: 9 kg

gear motor, electric motor -Engine Manufacturer: Nord SK71L/4 -Speed: 53 rpm -Engine power: 0.37 kW -Type: B3 -Drive shaft: Ø 20 mm -Protection class: IP 54 -Dimensions: 430/140/H200 mm -Weight: 14 kg

Gear motor, electric motor, electric gear motor -Speed: 11.2/22.6 rpm -Power: 0.37/0.55 kW -Shaft diameter: Ø 30 mm -Construction: B5 angle -Protection class: IP 54 -Dimensions: 490/230/H240 mm -Weight: 33 kg