sk 50 used for sale

Heber conveyor belt GF 34500-600-500 RA2241 Technical data: Conveyor length (NL): 34500 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, RF63DT90L4 Electrical data: 50Hz V380-500, kW 1,5 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 34500 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralan ...

Technical data of the pallet rack crossbar: Shelving system: Dexion Type: Speedlock P90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 130 x 50 mm Truss Type: SLB Agraffe: 5 HK Clear width: 3,500 mm Max. load per pair of trusses 2,500 kg, with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Technical data of the pallet rack stand: Shelving system: Arestant Type: AS The scope of delivery includes: 01x Pallet rack stand, used Material color: blue Profile dimensions: 80 x 77 x 1.8 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) Height: 4,500 mm Depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Compressed air-cleaned dust filter with stainless steel housing, filter area: 10 m², filter media: 4 filter cartridges, incl. ESM-3 control unit and manifold for flange mounting on the underside. Filter was used for dedusting a horizontal mixer for mineral building materials.

NR KATALOGOWY 7958 DANE TECHNICZNE - max wysokość cięcia 120mm - szerokość wału 510mm - średnica wału 75mm - max średnica piły 400mm – z góry: - zapadki/odrzutniki 2 rzędy - wał ciągnący, zębaty - wał ciągnący zębaty, wyprowadzający – z dołu: - zapadki/odrzutniki - 2 wały ciągnące, zębate - wał z piłam - wał ciągnący zębaty, wyprowadzający - 6 rodzajów prędkości posuwu - silnik od hydrauliki (rozsów, posuw, wałki) 3kW - silnik główny 22kW - płynna regulacja prędkości posuwu - wymiar stojaka pulpitu 700x600x1000mm - wymiary całkowite dł/szer/wys 2300x1450x1600mm - waga około 2650kg ATUTY – produkcji tureckiej – solidna konstrukcja – maszyna używana, stan bardzo dobry Cena netto: 37900 PLN Cena netto: 9024 EUR w zależności od ceny 4,20 EUR (Ceny mogą się zmieniać wraz z wyższymi wahaniami)

Key data: 400 KW, 500 kVA, 400 V

The largest model in Electroquell's range. The 500 kVA (400 kW) generator with a Ricardo motor is suitable for shopping malls, industrial plants and large investments. Ricardo Motor ComAp IL-NT AMF25 controller Brushless alternator Weatherproof housing Drip pan Possibility of continuous operation 24 hours a day Power: 500 kVA / 400 kW Voltage: 400 V Current: approx. 722 A Fuel: Diesel EN 590 Additional options: ATS system, remote communication, cooler for 55 degrees Warranty: up to 60 months

1st package of painted props = 3.340,50€ package price 350 x Props painted 1.60 - 3.00m, used = 8.50€/piece 43 x Props painted 2.00 x 3.50m, used = 8.50€/piece Including 8 x stacking rack, used 1st package of galvanized props = 2.040,00€ package price 133 x Galvanized prop, used 1.60- 3.00m = 15.00€/piece 2 x Galvanized prop, used 2.20 - 4.00m = 15.00€/piece 1 x galvanized prop, used 2,50 - 4,50m = 15,00€/piece Including 3 x stacking rack, used Only available in a package! Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. All prices excl. VAT and transport Subject to sale Andreas Becker e. Kfm. VAT ID NUMBER: DE279047055 Phone 07305/9562350 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Company SFS Ulmer Str. 1 89614 Öpfingen Ulm Registration C ...

Square, locksmithsquare, hair square, precision hair square -Angle angle: Leg length 500 x 330 mm -Quantity: 3x angle brackets available -Price: per piece -Dimensions: 510/330/H50 mm -Weight: 4 kg/pc.

Legi-Air 4040Z with Zebra110pax4 label printer and pneumatic stamp. RA1933 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status indicator and buttons Print type: thermal transfer printing or direct thermal printing selectable Interfaces: RS 232 Seriel, IEEE 1284 Print media: standard media, tags and RFID media (reading and coding of RFIF labels) label length min: 12,7mm width print media: 16-114mm ribbon width: 25,4-107mm Ribbon length max: 900m Roll size diameter core: 25,4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) dot size 0,125mm x 0,125mm Print speed: 12 inch/second Features: Breite Druckmedium: 16-114mm Breite Farbband: 25,4-107mm Maximale Länge Farbband: 900m Punktgröße: 0,125mm 0,125mm Druckgeschwindigkeit: 12 \/s, 304,8 mm/s Druckertyp: 110Pax4 Druckmedien: Standart, Anhänger und RFID-Etiketten

Bonding/crimping of toe caps; with preheating device; Spray gluing device (latex adhesive) and pressing device

Transnorm curved belt conveyor left bend 180°-650-500 IR600 RA2398 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 180° nominal/external width (NB): 650 mm belt width (GB): 500 mm innerradius (IR): 600 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor Electrical Data: 380-500 V, 0,37 kW Conveying speed: 0,5 m/s Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2012 condition: very good (used) Nominal / inner radius in mm: 600 Nominal / outside width in mm: 650 Belt width in mm: 500 angle: 180° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,5 scope of delivery: withou ...

Glatt GCM 500 film coating machine for tablets, etc., perforated drum, drum diameter 1570 mm, drum opening diameter 550 mm, viewing window diameter 350 mm, max. drum volume 500 l, max. batch size 400 kg (at a bulk density of 0.8 kg/l), drum speed 1.5–15 rpm, spray system with peristaltic pump and 5 spray nozzles for film coating with a nozzle insert diameter of 1.5 mm, incl. inlet and outlett air system with frost protection heating, pre-filter, dehumidifier, dust collector, exhaust fan, electrical connection 400 V/3-phase/50 Hz, protection class IP55, all metal parts made of AISI 316 L stainless steel, spray nozzles made of AISI 316 stainless steel, in mint condition as practically unused.

Manufacturer: Trumpf Model: Trulaser 5060 Type of Machine: CO₂ Laser Cutting Machine Technical Specifications: Working Area: - X-axis: 6000 mm - Y-axis: 2000 mm - Z-axis: 115 mm Max. Workpiece Weight: 2800 kg Speed: - Axis-parallel: 200 m/min - Simultaneous (X and Y): approx. 300 m/min Accuracy: - Smallest programmable increment: 0.001 mm - Position deviation: ±0.1 mm - Average position scatter: ±0.03 mm CNC Control: - Model: Siemens Sinumerik 840D - RAM: 64 MB - Monitor: 12 TFT - Program memory: 500 MB for NC programs - Disk Drive: 3.5 - OS Platform: Windows NT Find more here - .ucymachines/ Contact us at - sales@ucymachines

Inverter welding machine, power source, digital control inverter -Manufacturer, Type: OTC DAIHEN, DP-500 -Welding current range: 500A 60%, 350A 100% -Mains connection: 400 V -Software version: P10499 Ver003. 200,000 Accessories: as shown in the pictures -Dimensions: 700/300/H600 mm -Weight: 57 kg

with additional vacuum insert (sack)

Max. sheet thickness: 2 mm steel Max. blank diameter: 1000 mm Motorized drive via foot switch

Technical data for the pallet racking system: Shelving system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 11,500 mm Number of fields per row of shelves: 06 pcs. Number of levels plus ground level: 05 pcs. Technical data on the volume: Pallet spaces per field: 12 pcs. Number of pallet spaces per row: 72 pcs. Total number of pallet spaces: 72 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): approx. 1,250 kg The scope of delivery includes: 07x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: P173 Profile dimensions: 100 x 75 x 2.00 mm System perforation: 50 / 50 mm Incl. cross and diagonal struts, and footplates The stands are pre-assembled (screwed truss) Hei ...

Perkin Elmer Clarus 500 with autosampler and 2 x FID, currently serviced

Wood and green waste shredder Chippo 5010 CDT #234004 Specification: Category: Mobile Hacker Manufacturer: Komptech Hackbox hours: approx. 7,000 Mileage: 62 368 km Power: 397 kW / 540 hp Weight: approx. 30 500 kg Emission class: Tier 4 Final / Stage IV Chipper rotor with 12 blades Hackbox swivel MAN TGS 35.540 (540 hp) Crane Epsilon Q130ZD96, year of manufacture: 2014, max. weight: 4.010 kg 1 drum speed 400 rpm Transport weight: approx. 31 t Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.

Specifications: Manufacturer: 3M ESPE Type: Lava CNC 500 Control: Beckhoff Year of Make: 2008 Compressed air: 6.5 bar Rated power: 1 kW Rated mains frequency: 50/60 Hz Weight Weight: 620 kg Condition Condition: Used Functional: Tested and fully functional

Demonstration and trade fair machine. including suction line. Equipment: European safety regulations (sign C.E.) olimpic 500 - Version "HP T-ER2" (40) Volt 400 EU Frequency 50 Hz Control console "eye-S" (control panel) Human-Machine Surface Software (HMI) "Maestro active edge" Maestro connect: Preparation without gateway for subsequent installation Fine milling and radius pulling blade unit radius = 1 mm Fine milling and radius drawing blade unit radius = 2 mm Electronic positioning of the upper pressure beams Spacers on the inlet ruler Kit "SAV€NERGY" Interior lighting of the cab and the gluing area "Nesting" sensing rollers Release Agent Spray Unit "AAR" Sprayer for finishing the edge Sprayer for sensitive edges Joining unit "RT-V1" "EASY SIZE" device Glue unit "VC-VM" Ceramic lamp with infrared rays Electronic positioning of the pressu ...

Tumbler with cooling system Manufacturer: Gunther Model: GPA 500K Made of stainless steel Dimensions: 2200 x 1650 x 2550mm Volume: 500 liters Electric power: 3.5kW

Technical data of the pallet rack crossbar: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 100 x 50 mm Truss type: SLB 100|13 Agraffe: 5 HK Clear width: 2,800 mm 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

: 585/600 mm : 465/480 mm : 385/400 mm : 900x500 mm : 1200x250 mm : 40-2000 U/min : SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - Max. load capacity 5000 kg - Max. clamping diameter 1800 mm - Face plate dimensions 1200 x 1200 mm - Rotary movement electr. Infinitely variable - Right + Left – Run - E. - Remote Controller - Welding current transmission approx. 650 A - Drive 400 V / 2.2 kW - Space requirement approx. W 1500 x H 1650 x D 1300 mm - Weight approx. 2500 kg

table diameter: 500 mm table load capacity: 420 kg table height: 185 mm centre height: 315 mm center hole: MK 5 mm indexing: 15 ° weight: 275 kg dimensions of the machine ca.: 600 x 850 x 200 m Rotary table in excellent condition for for horizontal and vertical use. - Serial No.: P56030 - for vertical or horizontal use - Indexing every 15° or continiously variable by clamping - mech. Hand wheel with scale - Center bore taper MT 5 - Hand Lever with 3x indexing discs The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3 : 900 mm centre distance: 2x 4mm mm Distance between centres: 1x 5 mm mm capacity: 600 kp : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Centrax 501 KB57 DLE Gas Turbine-Generator Package engine overhaul in 2017 at 24 000 hours 372 start service hours 23 000

Strapping machine, packaging machine -Through hole: 500 x 500 mm -Strapping band: 5 mm -Core diameter: 60 mm -Coil width: 120 mm -Pressing the pedal triggers the automatic strapping.

ALLCOMP UNICUT CC 5018 automatic cutting machine was built in 2015 in Poland by ALLCOMP POLSKA Sp. z o.o. The machine designed for the manufacture of clothing and all types of sewing products enables the cutting of single and multi-layered materials. It is distinguished by the use of state-of-the-art technology, which enables full automation of the cutting process while reducing material losses. The cutting process is performed by means of a robust oscillating knife, which is automatically sharpened during operation. This solution minimises the number of undercuts and ensures high repeatability of the cut regardless of the type of material being cut. Thanks to the high oscillation speed of the knife at 6000 cycles per minute, all operations are performed rapidly with the highest cutting quality. The UNICUT CC50 automatic cutting machine is controlled by dedicated software, which al ...

Key data: 50 t, 1600 mm, 200 mm

CNC Press Brake COLLY 502/A Numerical Command: CYBELEC type DNC 32 P-CM Capacity: Maxi length 2000 mm x 50 T Throat depth: 200 mm Distance between uprights: 1600 mm Back Gear Gauge 1 axe Defective cylinder Right cylinder joint to change Machine functional (only right cylinder joint to change) Voltage: 380 V Length: 2500 mm Depth: 2100 mm Total height: 2400 mm Weight: approx 4 T

Used homogenizer made by Brogli + CIE Basel Switzerland, type: MH 500 B, capacity: 500 liters with heating jacket, frame mixer, teflon scrapers, dispersing mixer and comb homogenizer.

E-chain hoist, electric hoist, crane DEMAG type DK5-500-K-V1F4Fabr. No.: 63314301 Year of construction: 1992Load capacity 1000 kgHook travel 4.1 metersDistance suspension to load hook 480 mmMain lifting speed 4 m/min. Fine stroke speed 1 m/min. Cable length of operating bottle approx. 1.8 metersMains connection 400 volts, 50 Hz.2 load trains = 1000 kg- emergency stopWeight 43 kggood condition; used

Electric motor, three-phase motor, vibration motor, industrial vibration motor -Manufacturer: OLI MVE, Electric Vibration Motor -Type: MVE 500/15N-4OAO -Power: 0.25 kW -Speed: 1400 rpm -Protection rating: IP66 -Dimensions: 330/175/H195 mm -Weight: 20.9 kg

Fine boring head, spindle tool, boring head, bridge tool, fine boring headBoring tool, spindle headBoring tool, spindle headBoring rodReceptacle for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731 200Boring head for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-010Boring block for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-500Counterweight for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-600Tool holder: GRAFLEX Holder size G7 = 46 mmProcessing diameter: 200-280 mmAdjustment accuracy: 0.01

Roboter ABB Robotics IRB 7600-500/2.55 M2004 Rob. Item no. 7600-103651 The 7600 is part of ABB's heaviest line of high-performance industrial robots. Payload 400 kg for 2550 mm extension. The IRB 7600 is ideal for heavyweight applications, regardless of the industry. Typical areas can include handling heavy fixtures, turning bodies, lifting engines, handling heavy parts in foundries or forges, loading and unloading machine cells, and handling large and heavy pallet layers. This robot comes with the IRC5 M2004 controller (fifth generation of the ABB control system), which offers: FlexPendant The FlexPendant features a clear, full-color touchscreen-based design and a 3D joystick for intuitive interaction. Powerful support for customized applications allows you to load RAPID programming language RAPID programming offers the perfect combination of simplicity, flexibility and ...

4 pieces of adjustable jaws INGERSOLL for face plateChuck jaws for lathe chuck, mechanical clamping device, clamping blockNo: 39.02.10000 / 501.397Jaw width 70 mmJaw length 180 mmJaw carrier height 150 mmBase plate 325 x 265 mm- Step jaws for turning as rotary and drilling jaws- Jaw adjustment via trapezoidal threaded spindle- Jaw support with 6 recesses 40 x 30 mm for fastening- Distance between recesses 280 x 133 and 220 x 90 mm (center)Dimensions L x W x H 325 x 265 x 215 mmWeight per jaw 36.5

Roboter ABB Robotics IRB 7600-500/2.55 M2004 Rob. No. 76-63756 The 7600 is part of ABB's most powerful range of heavy-duty industrial robots. Payload 500 kg at 2550 mm radius. The IRB 7600 is ideal for demanding applications in all industries. Typical areas of application are the handling of heavy fixtures, the turning of car bodies, the lifting of engines, the handling of heavy parts in foundries or forges, the loading and unloading of machine cells and the handling of large and heavy pallet layers. This robot is equipped with the IRC5 M2004 controller (fifth generation of the ABB control system), which has the following features: FlexPendant The FlexPendant features a clear, full-color touchscreen design and a 3D joystick for intuitive operation. Powerful, customizable application support allows you to load RAPID programming language RAPID Programming offers the perfec ...

Roboter ABB Robotics IRB 7600-500/2.55 M2004 Rob. No. 76-63750 (28670 operating hours) The 7600 is part of ABB's most powerful range of heavy-duty industrial robots. Payload 500 kg at 2550 mm radius. The IRB 7600 is ideal for demanding applications in all industries. Typical areas of application are the handling of heavy fixtures, the turning of car bodies, the lifting of engines, the handling of heavy parts in foundries or forges, the loading and unloading of machine cells and the handling of large and heavy pallet layers. This robot is equipped with the IRC5 M2004 controller (fifth generation of the ABB control system), which has the following features: FlexPendant The FlexPendant features a clear, full-color touchscreen design and a 3D joystick for intuitive operation. Powerful, customizable application support allows you to load RAPID programming language RAPID Programm ...

Roller conveyor with drive SFB conveyor technology type ITF / R-KT 50Roller conveyor with driven carrier rollers, roller conveyorMachine- No: 201800954/2 Year of construction 2019Roller conveyor length: 2000 mmUsable roller width: 500 mmRoller diameter: 50 mmNumber of rollers: 21 piecesRoller spacing: 100 mmConveyor speed: approx. 8 meters/minMotor power: 0.12 kWNet connection: 400 volts, 50 Hz- chain drive via SEW gear motor- all rollers driven with freewheel in both directions- ball-bearing steel rollers- Frame profile made of 3 mm U-steel with

Motor-driven circular shears FASTI type 502 - 10 - 2Masch. No. 9252 009 Year of construction 1992Material thickness max. 2 mm (400N/mm²)Maximum blank diameter 1000 mmMinimum blank diameter 100 mmCutting shaft speed 60 and 120 rpmCutting speed 12 and 24 m/min. Knife holder 20 mmKnife diameter 65 mmProjection of the clamping plate 720 mmProjection of the cutting wheel 280 mmMotor power 1.1 / 1.4 kWWeergized connection 380 volts, 50 Hz- 2 motor speeds- mechanical clamping tip-

; Gross weight [kg]: 4830; Engine: Cummins 6ZTAA13-G4; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 800

; Gross weight [kg]: 18290; Engine: Caterpillar 3516B HD; Accessories: Control Panel, Caterpillar 3516B HD Genset from the official CAT Rebuild Program., Engine is completely rebuild by CAT or even unused/surplus., All other components are usually new., Comes with the standard CAT factory warranty.

; Gross weight [kg]: 1414

Decoiler Coil weight: 2,5 ton Material width: 50 - 500 mm Coil exterior diameter: 1400 mm Expansion range: 420 - 520 mm Leveller / Straightener Material width : 500 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 50 mm Number of pinch rolls: 2 pcs. Material thickness: 6 mm Cross section: 3000 sq mm Feeding speed: 6 - 24 m / min

pressure: 500 t passage width: 750 mm stroke: 120 mm total power requirement: 57 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Power [PS]: 170; Gross weight [kg]: 2750; Engine: Battery System: LIFePO4; Accessories: Battery, Stahldach

Motor output: - kW Dimensions (L/W/H): - mm Vertikal stroke: - mm Table dimensions: - mm Dust suction hood: - mm Diameter of the saw arbor: - mm Length of the rolling table: - mm Sawblade tiltable: - ° milling stroke vertical: - mm total power requirement: - kw Weight: - kg Spindle diameter: - mm Length of the planing table: - mm Number of heads vertical: St. Number of heads horizontal: St. Number of milling agregates: St. Number of knives: St. Number of sanding units: st. Number of spindles: St. Number of spindle head vertical: St. Number of spindles head horizontal: St. Number of milling spindles: St. 0: St. Number of tools: St. Working width: mm Year: 0 Speed of boring spindles: U/min. Required air-pressure: bar Dowel insertingunits: St. Electrical height adjustment: 0 Working height: mm Workpiece length min.: mm Air consumption: m³/h Positions adjustment of boring unit: mm Position ...

max. grinding diameter: 300 mm grinding length: 500 mm workpiece length: mm Number of axles: 6 St. centre height: 220 mm centre distance: 500 mm x-axis: 500 mm y-axis: 320 mm z-axis: 320 mm total power requirement: 5 kW weight of the machine ca.: t dimensions of the machine ca.: m Height of centres 200 mm Distance between centres / clamping length 750 / 500 mm Table size 290 x 1,600 mm Intermediate table 110 x 1,200 mm X / Y / Z axes 500 / 320 / 320 mm Feed speeds, X, Y & Z axes 0.005 - 5 m/min Grinding head swivelling, vertical axis (B axis) 300 ° Grinding head tilting (C axis) +/- 30 ° Speed range of R axis 0 - 50 rpm Grinding spindle speeds, approx. 5,000 - 10,000 rpm Workpiece holding fixture 50 ISO Indexing 1 - 999 ° Leads 0.5 - 10,000 mm Spindle drive 4 kW Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight, approx. 4,000 kg Accessories / Special Features SCHÜTTE CNC ...

; Power [PS]: 170; Gross weight [kg]: 5500; Engine: Battery System: LIFePO4; Accessories: Battery, Stahldach