sk 50 used for sale

Handwashing basin, washbasin, weld-in basin, weld-in swivel basin -Stainless steel washbasin -Internal dimensions: 500 x 400 mm -Depth: 250 mm -Edge: 18 mm -Number: 65x available -Price: per piece -Dimensions: 540/440/H250 mm -Weight: 3.7 kg

CONTROLS   PLC SIEMENS S7 300 OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 500 mm   sheet thickness max.: 4 mm   coil weight max.: 10.5 to   feedstock transport direction: right to left COIL CHAIR   coil weight max.: 10.5 to   stroke: 750 mm DECOILER   design: single reel   sheet width max.: 500 mm   sheet width (min): 150 mm   coil weight max.: 10.5 to   max. diameter of coil: 2020 mm   mandrel expansion range from: 470 mm   mandrel expansion range up to: 530 mm   feed velocity max.: 20 m/min LEVELLER UNIT   sheet width max.: 500 mm   sheet width (min): 150 mm   sheet thickness max.: 4 mm   sheet thickness min.: 2 mm   number of leveller rolls: 9   diameter of leveller rolls: 56 mm   diameter of feed rolls: 150 mm   feed velocity min.: 1 m/min   feed velocity max.: 20 m/min CUT-TO LENGTH SHEAR   sheet width max.: 530 mm    ...

Handwashing basin, washbasin, weld-in basin, weld-in swivel basin -Stainless steel washbasin -Internal dimensions: 500 x 400 mm -Depth: 300 mm -Edge: 18 mm -Drain: Ø 60 mm -Number: 26 available -Price: per piece -Dimensions: 540/440/H300 mm -Weight: 4.3 kg

Key data: 500 mm, 200 mm, 77 mm

Binder 500x200 Complete System Electric 220V Magnet Clamping Plate Milling Grinding Total weight approx. 50 to 60 kg. Good used condition, full function. Includes switch and control cabinet. The connection on the control box can be connected directly to 220 volt luminous flux and can therefore also be used universally on the milling machine. The actual magnet has 110 volts. Very long power cord, about 7-8 meters. The rotary switch only works to the right. That is how it should be. Always switches every 180 degrees every function. You will receive an invoice in paper form. Differential taxation according to paragraph 25a of the German VAT Act. Therefore, no VAT is shown on the invoice.

Key data: 730 mm, 730 mm, 740 mm

Mazak HC Nexus 5000-ll CNC Horizontal Machining Center CNC Control Mazatrol Matrix Pallet table size 500 x 500 mm Number of pallets 2 Table load 700 KG Travel X-Y-Z axes 730x 730x740 mm Table Indexing 0.001° Spindle taper DIN 69871A-40 Spindle speed 18,000 1/min Spindle motor 35-26 kW Mazgazin capacity 80 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail.

Transnorm conveyor belt GF 2200-600-500 RA2388 Technical data: Make: Transnorm Conveyor length (NL): 2200 mm Frame width (NB): 600 mm, 700 mm with motor Belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Support feet: optionally available Conveyor speed (v m/s): 0,3-1,2 Drive: SEW geared motor, with Movi-Mot Frequency inverter for stepless speed change Electrical data: 50Hz V380-500, kW 0.37 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2008 condition: good (used) Conveying length in mm: 2200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Movi-Mot KW: 0,37/S1 Conveyor speed m / s: 0,3-1,2 scope of delivery ...

Specifications Cutting width: 4.5 x 40-80 mm Year of Make: 1994 Power connection: 400 V / 7.5 kW Price: on request the safety level DIN 66399: P3 DIN 66399-1 Machine is fully functional after technical supervision. The PREMIUM paint renovation - 470 EUR additional payment If you have any questions, please call us: +48 696 072 985

Transnorm conveyor belt GF 2250-600-500 RA2389 Technical data: Make: Transnorm Conveyor length (NL): 2250 mm Frame width (NB): 600 mm, 700 mm with motor Belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Support feet: optionally available Conveyor speed (v m/s): 0,15-0,80 Drive: SEW geared motor, with Movi-Mot Frequency inverter for stepless speed change Electrical data: 50Hz V380-500, kW 0.37 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2008 condition: good (used) Conveying length in mm: 2250 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Movi-Mot KW: 0,37/S1 Conveyor speed m / s: 0,15-0,80 scope of deli ...

End mill, end mill, cutter, shell cutter -Manufacturer: Reishauer, end mill with longitudinal groove, 2 pieces -Type: 75 x 75H Sp 5000 KHSS-E 75x75x27 -Hole: Ø 27 mm -Cutting material: HSS-E -Price/Fee: complete -Transport dimensions: 150/75/H75 mm -Weight: 2.9 kg

Manufacturer: Syntegon Model: AFG 5026 Year of Manufacture: 2019 Type of Machine: Filling and Sealing Machine for Vials with Powder Condition: Not used Key Features: - Zoning concept for infeed, filling, outfeed, and drive area - Best accessibility and simplified cleaning procedure - Innovative transport system for continuous and intermittent operations - Vertically rotating mechanism - High output, even with 100% IPC (In-Process Control) - Ideal for wall installation - Optimized Design: - Vertical wall design for best operability - One-side operability for streamlined workflow - Suitable for integration with barrier systems - In-wall installation for space efficiency Find more here - .ucymachines/ Contact us at - sales@ucymachines

Key data: 500 t

DURENDUS 500 T Workshop Press – Single Column Press – 1,600 mm Clear Width, 550 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 46.950 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with X-shaped T-slot 800 × 1,200 × 120 mm Pressure adjustment Lateral displacement of ...

Stock number: 3944 Suction Manufacturer: 3NINE LINA, Type: 500 Oilmist Separator Machines NO.: OLIETAAGE UDSUGER, Specifications: Fence effect 500 m3/hour m/3 Engine power 0.55 Kw Cleaning oil mist (cutting fluid/coolant) Min. / max Grad 5-50 degree C. Height: 840 mm, Width: Dia. 480 mm, Weight: 30 kg

Braumeister Micro Brewery System – 500 L The Braumeister is a fully automated brewing system designed for simplicity of operation, ease of cleaning, and reliable performance. It features a five-step automated control process that streamlines the brewing cycle and ensures consistent results. The 500-liter system is well suited for small commercial applications such as bars, cafés, and pilot breweries, as well as for highly experienced home brewers. The unit is supplied with integrated wheels and a hoist for ease of handling. It has a compact footprint, fully automated operation, and a jacketed vessel for efficient cooling. The system also includes a whirlpool function, making it a comprehensive solution for small-scale commercial brewing. Technical Characteristics Manufacturer Speidel GmbH Model Braumeister 500 Litre Manufacturing year 2016 Capacity approx. 500 l fin ...

Pressing tool, clamping pad, square profile, support profile, alignment pad -Square profile: clamping base, support profile, alignment base -Length: 503 mm -Number: 2x profile available -Price: per piece -Dimensions: 503/97/80 mm -Weight: 27.5 kg/pc.

IDRA OL MG 500 die casting machine Year: 1984 | S/N: 6362 | Used DESCRIPTION: THIS MACHINE IS ON THE PART OUT AND SCRAP LIST This Hot Chamber Die Casting Machine 500 Ton is manufactured by Idra. The control was updated in 2017. Located at our warehouse in Preston, Idaho and is ready for inspection and shipping. We care about the machines we sell and want all of them to enjoy continued productive and profitable service for our remarkable customers. Included specifications are gathered from various sources such as firsthand inspection, owner or operator interviews, manuals, and OEM research. All machinery specifications, condition and details are represented accurately to the best of our knowledge. Confirmation by purchasing entity is recommended and encouraged prior to purchase. Price, location, and specifications are subject to change. SPECIFICATIONS: TONNAGE ...

MUBEA PROFI 500 hydraulic ironworker machine was built in Germany by Muhr und Bender Maschinenbau GmbH (Mubea). The machine, designed for complex machining of steel workpieces, is equipped with 4 individual workstations. They are capable of performing such processes as precise hole punching, as well as shearing flat bars, angle bars and bars. Each station is hydraulically controlled. The extremely robust design of the machine additionally ensures maximum process stability during even the most intensive challenges. All of this makes the offered Muhr & Bender PROFI 500 ironworker machine the perfect choice for increasing production efficiency in industrial facilities and locksmith workshops. Technical specifications of the MUBEA PROFI 500 ironworker machine General data - maximum press force: 50 t (500 kN) - number of workstations on the Muhr und Bender PROFI 500 machine: 4 Flat b ...

Qty. 1 Second-hand sandwich panel production line Line manufacturing of insulated metal panels for sectional doors (garage). Mfc.: METECNO Technology SPA; FASPAR Built: 1994 Reconditioned and commissioning: 2006 Useful working width: 500/610 - 10 mm Panel door thickness: 40 mm Sheet thickness: 0.37/0.70 mm Capacity: 1,500,000 m panels/year

Manufacturer: IMA Steckprofileindrückmaschine, Type: Nowimat/I/G80/500, Year: 2001, Control: Ima, Work piece width min-max mm: ca.60, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 10-45, Min-max feed m/min: ca.20, automatischer Einzug: yes, Premilling: 4 X 2,2 kw, Coil magazine: 2 Stück Stegprofil, Mitre stations: yes, radius milling: Eindrückstation Profil, Work piece refeeding: yes, Hover cussion table: yes, Hover cussion table: yes, Year :2001

BOSCH U-HD 500 steam boiler was built in 2017 in Germany by Bosch Industriekessel GmbH. The unit is ideal as a source of high-quality steam for use in both technological processes and for heating purposes. The steam is generated by heating water with gas or oil. The fuel combustion process is environmentally friendly, thanks to a highly advanced torch and firing system that reduces the emission of pollutants. The work chamber, on the other hand, is lined with high-performance thermal insulation materials in order to maintain a constant temperature throughout the entire work cycle. The BOSCH U-HD 500 is operated from a PLC-based control system with the highest level of operating data transparency. The versatility of the machine, combined with its certification in accordance with the Pressure Equipment Directive (PED), makes the offered BOSCH U-HD steam boiler suitable for use in many indu ...

Stock# U2443-4 Used stainless steel jet stream mixer by Ystral Gmbh (DE) type Y12.500L.LL/LDT-4DA GMP. Agitator is directly driven by el motor 12.5 / 3.5 kW, 1465/725 rpm, 400 V, 50 hz. Shaft has working length 1100 mm. Cage has internal diameter 245 mm. Three blade propeller has diameter 200 mm.

Manufacturer: Bargstedt Aufstapelanlage, Type: TBH 500 , Year: 2005, Control: Bargstedt, Program: yes, Stacking device: yes, Work piece length max mm: 3000, Work piece length min mm: 280, Work piece width min-max mm: 250-1200, Min.-max. workpiece height in mm: 12-60, Stack height in mm: 1600, Number of stacks: 2, Workpiece weight/stack position in kg: 60, Outlet roller conveyor mm: yes, Cycles approx.: 15, Year :2005

Manufacturer: Bargstedt Abstapelanlage, Type: TSH 500/Q/30/12S, Year: 2005, Control: Homag, Work piece width min-max mm: 1200, Min.-max. workpiece length in mm: 280-3000, Min.-max. workpiece height in mm: 12-60, Longitudinal feeding: yes, Stacking pattern, single-row: yes, Stacking pattern, double-row: yes, Number of stacks: 2, Stack height in mm: 1600, Removal of protective boards: yes, Erection in a pit: no, Year :2005

Manufacturer: Weeke, Type: BHX 500, Year: 2007, Work piece width min-max mm: 70 - 1.000, Work piece length min-max mm: 200 - 2.500, Work piece thickness min-max mm: 4 - 80, Working range X: 2.500, Working range Y-axis: 1.000, Working range Z: 80, Vertical drilling station from below: 32, Vertical drilling station from above: 32, Drilling supports horizontal: 2, Horizontal drills-X: 2 x 8, Drill horizontal Y: 2 x 2, Number of spindles: 1.500 - 7.500, Number of spindles: 1.500 - 7.500, Year :2007

Manufacturer: Wagner, Type: Finisch 500, Year: ca.2005, Wasserbasierend Lacke: yes, 2K-Lacke möglich: yes, Elektr. pump: yes, Laquer reservoir litres: ca.10 Liter, Flushing circuit: yes, Movable: yes, Spray gun manufacturer: Wagner, Spraying stations: 1, Fast exchange system spray gun carrier: yes, Laquer circles: 1, Laquer system - airless: yes, Electrical power consumption kW: 2,8, Transmission ratio: 250 bar, Conveying output l/min: 5,7, Delivered checked: yes, Wight approx. kg: 52, FREE TEXT: 220 Volt/2,8 Kw/Gewicht 52 Kilo/zusätzliche Schläuche/2 Stück Sprühlanzen/ , Year :ca.2005

Manufacturer: MBusch, Type: MB LA 500, Year: ca.1997, Working widht mm: 600, Working hight mm: 80, Workstations: 4, Glue jets: 4, Schlitz und Zapfenbeleimung: yes, Pneumatical work piece clamping: yes, Fusspedal Takt: yes, Wasseranschluss zum reinigen: yes, Leimpumpe: yes, Movable: yes, Automatical glue supply: yes, Compressed air bar: 6, Year :ca.1997

Technical data of the pallet rack crossbar: Shelving system: Nedcon Type: NS The scope of delivery includes: 01x Pallet rack crossbar, used Material color: blue Box profile: 130 x 50 mm Clasp: 7 HK (hooks) Clear width: 3,700 mm Max. load per pair of trusses 3,000 kg at the same weight. Distributed load 02x Locking pin, used Material colour: sendzimir galvanised For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump, rotary vane pump -Manufacturer: Busch, rotary vane vacuum pump -Type: RC 0025 E 501 -Drive: 0.75 kW / 1410 rpm -Vacuum: 20 mbar -Dimensions: 560/440/H340 mm -Weight: 37.5 kg

5-axis machining center Mori Seiki NHX 5000 Year of construction 2011 (bought new in 2013) Hours10768 Processing time 7172 hours Electricity one hour 29288 With few operating hours, used only for single part to small series production, mainly for special mechanical engineering The specifications are as follows: Travels: Cylinder Ø 500 x 700 Control M730BM (Mapps2) Speed 10,0000 rpm. Tool holder SK40 DIN 69871 Tool changer 60-fold Pallet changer 2-fold Accessories: Documentation Internal cooling Knoll 50 bar Conveyor Activation to 400 tool positions Pine pallet with long zero point clamping system Lang tensioning tower approx. 100 pieces of tool holders SK40 An on-site inspection is possible at any time by appointment.

High-pressure pump for baler HSM 500.1 VL with 7.5 kW motor

Key data: 1500 KW, 1490 1/min

Siemens 1.5MW DC Motor with Watercooler incl. Simovert Masterdrive (Watercooled) Description attached

Technical data of the pallet rack crossbar: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 2004 orange Box profile: 80 x 50 mm Truss Type: PNB0488 Agraffe: 4 HK (hooks) Clear width: 2,500 mm Max. load per pair of trusses 1,000 kg with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

A pad printing machine from Teca Print is being sold. The machine is available 3x. Price per machine. The machine can and should be viewed and tried out on site, as warranty or guarantee is excluded. Price is net Loading facilities available All information without guarantee.

CONTROLS   PLC OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 500 mm   sheet thickness max.: 4 mm   coil weight max.: 10.5 to   feedstock transport direction: right to left COIL CHAIR   coil weight max.: 10.5 to   stroke: 750 mm DECOILER   design: single reel   sheet width max.: 500 mm   sheet width (min): 150 mm   coil weight max.: 10.5 to   max. diameter of coil: 2020 mm   mandrel expansion range from: 470 mm   mandrel expansion range up to: 530 mm   feed velocity max.: 20 m/min CROP SHEAR   sheet thickness max.: 4 mm   working width max.: 530 mm   stroke rate (max.): 20 /min LEVELLER UNIT   sheet width max.: 500 mm   sheet width (min): 150 mm   sheet thickness max.: 4 mm   sheet thickness min.: 2 mm   number of leveller rolls: 9   diameter of leveller rolls: 56 mm   diameter of feed rolls: 150 mm   feed velocity max.: 20 m ...

Joint cutter, diesel joint cutter, asphalt cutter -Saw blades: 2 -Saw blade diameter: 500 mm -Cutting depth: approx. 180 mm -Working width: 425 mm -Hatz diesel engine: 25 kW -E-Start -infinitely variable feed

AVIA FNE 50N CNC milling machine was built in 1998 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A. The machine is fully operational and has been regularly serviced throughout its service life. The AVIA FNE 50N was designed for precision machining of workpieces made of, e.g. steel, cast iron or aluminium. The machining process is performed inside a large work space by means of a reliable spindle with stepless rotational speed adjustment. When removed from the head, the spindle can operate both vertically and horizontally, with the same parameters. The work table with a length of approximately 1250 mm and a width of 500 mm, on the other hand, has T-slots for easy mounting of workpieces and tooling. All this is complemented by an intelligent HEIDENHAIN controller, offering convenient operation and access to many advanced functions. The AVIA FNE toolroom milling machine weighs 3000 ...

Key data: 5000 kN, 80 mm

KM 500/2700C2 Specifications Closing page: Clamping force: 5000 kN Wooden dimension h x v: 900 x 800 mm Min. installation height: 480 mm Plate spacing max.: 1650 mm Centering: 200 mm Tool weight: 7900 kg Splash Side: Screw diameter: 80 mm Capacity: 1433 cc Spray pressure: 1829 bar Equipment: MC 4 Control Core moves: 2+2

Key data: 500 mm, 125 mm

Safe-Solid-Fast The compact, simple, robust and innovative machine guarantees maximum safety, flexibility and reliability. Standard accessories: - Automatic protection and pressure device - Ergonomically positioned 2 hand control - Protective shield rigid - 1 meter roller conveyor to the right of the saw, with galvanized rollers. Load capacity 230 kg, diameter 60 mm, distance 250 mm, Width 350 mm. Including rear 100 mm high stop ruler. - 1 meter roller conveyor to the left of the saw, with galvanized rollers. Load capacity 230 kg, diameter 60 mm, distance 250 mm, Width 350 mm. Including rear 100 mm high stop ruler with scale. - 1 piece of pneumatically swivelling stop with 200 mm Length and control switch on the saw frame - 1 piece HM saw blade 500 mm, Z = 108 Technical data: Maximum Cutting Range: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW  ...

dishwasher for dishes, Electrolux ELE 506065 type EPPWEASMS, 400 V, 13.5 kW BJ 2018, basket size 50×50 cm, automatic lowering and raising of the hood, 3 washing programs and 1 x continuous washing, self-cleaning cycle, digital display, electrical preparation for automatic washing Washing-up liquid – rinse aid dispenser, original price €17286.00 Dimensions 83x89x176 cm, minus 35% discount

Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: heavy version -Material: Cast iron -Quantity: 16x mounting cubes available Price: per piece -Dimensions: 500/700/H500 mm -Weight: 277 kg