sk 50 used for sale

Incubator Manufacturer: Heraeus Type B 5090 E Glass Nominal temperature 70 °C, 220 volts

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 15 kW -Speed: 2930 rpm -Total pressure: 400 da Pa -Volume flow: 5000 m³/h -Connection input: Ø 400 mm -Connection output: 380 x 320 mm -Dimensions: 920/760/H775 mm -Weight: 216 kg

Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 500 mm -Height: 120 mm -Groove: mm -Dimensions: 660/680/H120 mm -Weight: 129 kg

Lippert belt conveyor GF 24500-650-500 RA1462 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 24.500 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 64 mm Drive drum (AT): Ø = 81 mm Belt: Type NNT-10 ENBU Year of construc ...

Key data: 1050 mm, 540 mm, 510 mm

Machine Details Stock-No. 1105-04012 Type of machine Machining Center - Vertical Make DOOSAN DAEWOO Type DN 500 Year of manufacture 2008 Type of control CNC Storage location HAGUENAU FRANCE Country of origin KORREA Delivery time IMMEDIATELY Freight basis Ex works Technical details longitudinal 1020 mm cross 540 mm vertical 510 mm Tool Changer 30 Pos. max. tool length 300 mm max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm Rapid Traverse 36 m/min weight of the machine approx. 7 t power capacity at 100 % load 11 kW power capacity at 40 % load 18 kW turning speed range 12000 1/min tool taper SK 40 table surface area 1200 x 500 mm groove width 18 mm Number of noches 4 St. Additional information direct measuring system, El. handwheel, internal coolant supply package (chipconveyor, cooling trought the spindle, 12,000rpm spindle) fanuc SERIES  ...

Year: 2016 - technically efficient, ready to work - after full service - cutting length: 4000 mm - discs: 500 mm (feed from the rear) - pneumatic inclination of both heads: 90°, 45°, 22.5°, intermediate angles set manually - operator panel with Windows - cooling and lubrication installation for both heads - movable roller feeder - vertical and horizontal pneumatic clamps - automatic disc covers - delivery device for long elements - safety gates

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 400 mm -Length: 502 mm -Height: 120 mm -Plate thickness: 28 mm -with: support ribs -Weight: 50 kg

Key data: 350 mm, 550 mm, 510 mm

Year of construction 07-2017 Mazatrol Smooth X Control Travel range: X-axis: 350 mm Y-axis: 550 mm Z-axis: 510 mm Swivel range A-axis -120° / +30° C-axis swivel range ±360° Max. spindle speed 12,000 rpm Tool magazine with 30 tool positions SK-40, DIN69871 Maximum workpiece height 350 mm Max. distance from spindle nose to top edge of table (horizontal) 560 mm Min. distance spindle nose to top edge of table (horizontal) 50 mm Max. distance spindle nose to table center (vertical) 550 mm Min. distance spindle nose to table center (vertical) 40 mm Max. table load 200 kg Air Blow Out Milling Spindle Maza-Check Mazak Monitoring B, Renishaw RMP 600 High-pressure coolant through the spindle, 15 bar Synchronized Tapping 5-axis simultaneous machining Preparation of chip conveyor, ejection left (without chip conveyor) Height 2,840 mm Width 1,900 mm Length 3,060 mm  ...

x-travel: 4.300 mm y-travel: 1.500 mm z-travel: 1.800 mm Control: HEIDENHAIN TNC 530 table-size: 5.000 x 2.250 mm T-slots: 9 T-slot - distance: 250 mm T-slot - width: 28 mm rapid traverse: 15.000 mm/min feeds: 10.000 mm/min milling head: 45° Automatisch UAD milling head: 0,1 º- 0,1 º conus- taper: ISO-50 DIN 69871 AD-50 number of spindle speeds: 60 - 6.000 U/min/rpm transmission ratio: 2 spindle drive: 28 kW Internal cooling system: 20 bar chip conveyor: Inkl. handwheel: Inkl. total power requirement: 36 kW weight of the machine ca.: 40.1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Laser engraving machine with 60 watt laser power used demonstration machine - with minimum operating hours (approx. 20 hours) - 60 watt MOPA laser (enables colored laser engraving on stainless steel) - incl. 4th axis (rotary unit) - incl. Windows 10pro 64-bit PC system - incl. 22" screen - Everything is fully installed and adjusted - Engraving software in German - Very easy to use - Switch on and get started - Fiber laser source with 60 watts for high-contrast and fast Markings with extremely high resolution (see pictures) - Depth engraving up to 4mm possible (also in hardened steel) - Wobble function, e.g. for cleaning metal components - for engraving on many metals (stainless steel, brass, aluminium, etc.) and a lot of plastics - Heavy industrial quality - Complete system / ready for immediate use - Working space approx. 500 x 600 x 600mm (lxwh) - Clampi ...

Key data: 500 mm, 400 mm, 300 mm

Year of manufacture 1985 with CNC control 432 The machine is in good condition, the second machine is available as spare part machine Two identical machines available !

# HIDROBRASIL 50 T Heating Press with Sliding Table (600x600mm) If the press does not exactly meet your requirements, please request an individual offer exactly according to your wishes with one click: HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly low prices! 50 T top piston heating press, in double column brackets suitable for continuous shift operation, with these basic data: - With a heating level - Idle speed up to 10 mm/sec (adjustable via rotary control) - Opening speed up to 40 mm/sec - Starting pressing speed 8 mm/sec - Table size/heating plate size 522 mm deep, x522mm wide - Plunger size/heating plate size 498 mm deep, x498mm wide - 2 heating plates, electrically heated, up to 200 degrees - Oil temperature monitoring - Circulating oil cooling on the hydraulics - Pressure Holding Valve 0 to 3600 sec - Pressure adjustment from  ...

Current delivery time: approx. 10-15 working days Ordered goods Technical data for the shelf trolley: Shelving system: Kimer Number of levels: 05 pcs. The scope of delivery includes: 02x Shelf stand, new Material colour: RAL 5003 sapphire blue Profile dimensions: 50 x 55 x 1.50 mm unassembled, incl. base plates Shelf depth: 400 mm Shelf height: 2,500 mm 10x Shelf trusses, new Material colour: RAL 2004 orange Truss length: 1,350 mm 20x Kimer Safety Pins Material colour: sendzimir galvanised 05x Particleboard, used Thickness: 22 mm Width: 1,340 mm Depth: 395 mm Version: multi-part 10x deep webs, new Material colour: sendzimir galvanised Shelf depth: approx. 400 mm 04x swivel castors, new swivel (360 degrees) Loadable up to 250 kg General information about the article: This item is only available for pickup. Any additional transport or shipment o ...

roller conveyor, conveyor track, roller conveyor belt, roller track -Roll width: 2000 mm -Conveyor length: 5000 mm -Roller drive: via conveyor chain

Inv. Num. : 7637 Type: Robot 500 Produzent: Vemag Erzeugt: Parametern: Portionsgewicht: 5-30.000 g Kapazität: 2800 kg/h

Stedler SAM-BA-MAT E 500 Shrink Wrapping Machine Manufacturer: Stedler Type: SAM-BA-MAT E 500 Shrink Wrapping Machine Operating voltage: 230 V Connected load: 0.75 kW Dimensions: (LxWxH) 1500 x 1170 x 1300 mm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

PC CPU, control card, output card, control unit, edgebander, edgebander -Manufacturer: HOMAG HOMATIC -Type: PC-CPU-2-083-01-5003 -Type: PC CPU 2083015003 -Number: 1x tax card available -Dimensions: 20/195/H265 mm -Weight: 0.31 kg

CPU Umlade-Ram auxiliary storage, control card, output card, control, edge banding machine, edge banding machine -Manufacturer: HOMAG HOMATIC -Type: 2-083-01-5004 -Type: 2083015004 -Number: 3x control cards available -Price: per piece -Dimensions: 20/195/H265 mm -Weight: 0.31 kg

Granulator for heavy duty Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw

Granulator for high loading (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw

Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Connection: 565 x 310 mm -Connection: Ø 500 mm -Material: sheet steel -Dimensions: 870/650/H650 mm -Weight: 38 kg

Fire basket, fire baskets, fire pit, fire bowl -Square -Material: Steel -painted: Black -Number: 2 baskets available -Price: per piece -Dimensions: 500/500/H560 mm -Weight: 22 kg

Granulator for high loading (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw

3000 x 1500mm 5000w With auto pallet changer & LiftMaster

Atlas copco GA50vsd screw air compressor good as new.

Inline homogenizer Manufacturer: Ystral Type: Z 5.500 S/W3DGA-124P Machine No.: 208490703 Year of Manufacturing: 2003 Power: 5.5 kW very good condition mixing tools as good as new mounted on stainless steel frame LWH: 1050 x 600 x 560 mm

Inline homogenizer Manufacturer: Ystral Type: Z 5.500 S Machine No.: 200731001 Power: 5.5 kW very good condition Mixing tool as good as new mounted on stainless steel frame LBH: 1050 x 600 x 560 mm

Hand wash basins, wash basins, built-in basins -Stainless steel sink -Interior dimensions: 500 x 400 mm -Depth: 250 mm -Edge: 40 mm -Drainage: Ø 50 mm -Number: 4x available -Price: per piece -Dimensions: 580/480/H250 mm -Weight: 5.1 kg

Müro paper milling machine A4; with frame; suitable for Müro 5000/A4. Müro paper mill; with frame; used for Müro 5000/A4.

Inv. Num. : 7718 Type: GL MATIC 500 Producer: OMAS Generated: Parameters: The machine is in good condition.

Inv. Num. : 7719 Type: VK-500G Producer: PSG Plus Created: 2020 Parameters: Internal dimensions of the machine (LxWxH): 400 x 200 mm

Hand wash basin with sink, wash basin -Stainless steel sink -Upper basin size: 390 x 285 x 120 mm -Lower basin size: 400 x 400 x 200 mm -Number: 6x pools available -Price: per piece -Dimensions: 700/500/H445 mm -Weight: 9.1 kg

Handwashing basin, washbasin, weld-in basin, weld-in swivel basin -Stainless steel washbasin -Internal dimensions: 500 x 400 mm -Depth: 300 mm -Edge: 24 mm -Drain: Ø 64 mm -Quantity: 4 available -Price: per piece -Dimensions: 550/450/H300 mm -Weight: 4.2 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 500 x 400 mm -Depth: 250 mm -Edge: 18 mm -Drainage: Ø 97 mm -Number: 12x available -Price: per piece -Dimensions: 540/440/H250 mm -Weight: 4.3 kg

Herbold Fine Mill PU 500 Suitable for fine grinding of plastics and soft to medium-hard materials Drive power 55 kW Grinding disc diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Herbold Fine Mill PU 500 Suitable for fine grinding of plastics and soft to medium-hard materials Drive power 55 kw Grinding disc diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Position transducer, actuator for valves, valve drive, actuator, servomotor -Type: T 100 a 502 -Weight: 0.3 kg

Height 1850 mm Width 950 mm Length 2650 mm Capacity 500 l Power supply: 400V 50Hz 3N Total power 12.5 kW Main Material Stainless steel, acid-resistant Stirrer Type Spiral Agitators Product ejection Pneumatic bottom flaps, product ejection from below Loading No loading, it is possible to buy a pillar loading for the machine Mixer Type Open Mixer

Dryer HERBOLD T 508 Rotor diameter: 500 mm Rotor width: 1200 mm kW: 30

Position computer, position scanner -Voltage: 220 V 50 Hz -Dimensions: 310/340/H210 mm -Weight: 12 kg

Position computer, position scanner -Voltage: 220 V 50 Hz -Dimensions: 310/340/H210 mm -Weight: 12 kg

Roller conveyor, conveyor belt, roller track -not powered -Roller conveyor: on wheels -Roller width: 500 mm -Transport length: 1500 mm -Roller diameter: 80 mm -Roller spacing: 200 mm -Total height of roller conveyor: 210 mm -Dimensions: 1500/625/H210 mm -Weight: 42 kg

Fully automatic cross strapping line Mosca RO-TRI-5 & RO-TR-500-4 Condition: overhauled, serviced, fully functional, ready for use Equipped for 8 mm polypropylene strapping Tape feeding and tape insertion into frames automatically Welding system: Heat wedge welding/welding tongue

Used Roll Splitting Machine Manufacturer: KLANKE Type: RGS-50A Year of manufacture: 03/2013 specifications: Roll width: max. approx. 3,000 mm Roll diameter: max. approx. 2,100 mm Cutting force: approx. 60 t (2 x 30 t) Operating pressure: max.: 200 bar Drive power: 7.5 kW Machine weight: approx. 15,500 kg Oil tank volume: approx. 140 Ltr. including frequency converters including: - Steel plate belt as feed belt Type: TLK 3000 Conveyor width: 3,000 mm Length: 5,520 mm Drive power: 3.0 kW Speed: 0.1 m/s Conveyor chain: FV 140 Steel plate: 8.0 mm with tube 60 x 40 x 4 mm - Steel plate tape as take-off belt Type TLK 3000 Conveyor width: 3,000 mm Length: approx. 3,500 mm Drive power: 3.0 kW Speed: 0.1 m/s Conveyor chain: FV 140 Steel plate: 8.0 mm with tube 60 x 40 x 4 mm including frequency converters  ...

Offer 24289 Specifications: - Max. cutting width 3060 mm - Max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1.50 ° - Cutting gap - adjustment via adjustment screws - Number of hold-downs 15 pcs - Stroke rate 23 to 43 rpm - Front angle stop -Mot. Positioning-controlled back gauge 15 - 850 mm - Cut line illumination - E – Footswitch - Drive 400 V / 7.5 kW - Space requirement approx. W 3900 x H 1600 x D 2400 mm - Weight approx. 4.5 t

Roller conveyor, roller conveyor, roller conveyor -Roll width: 500 mm -Conveying length: 1200 mm -Diameter roller: 50 mm -Roller conveyor height: 280 mm -Dimensions: 650/1350/H280 mm -Weight: 70 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Take shaft: Ø 15 mm -Tool: mm -Dimensions: 190/70/H85 mm -Weight: 1.8 kg

Original Danfoss frequency converter 1,5 kW 2,2 kW and many more

Surplus/Never used or installed, High suction pressure compression unit of 5000 PSI, speed of 1000 RPM, 3550 HP, 10 MMSCFD flow rate. This compressor package consist of: One (1) Caterpillar G3612 LE, one Ariel Compressor JGD/6, Murphy Controls, Cooler and all auxiliary components. This unit was manufactured in 2015, but the project was cancelled. The compressor unit was never used or installed, having undergone a preservation maintenance in 2019. Recently inspected by Enerflex. It was found in excellent conditions!

Component slide unit, pneumatic cylinder, air cylinder, pneumatic plunger, air plunger -Stroke travel: 50 mm -Air inlet and outlet: adjustable -Weight: 3 kg