sk 50 used for sale

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 100 V - 500 V -Installation dimensions: LxWxD approx. 140x140x93 mm -Dimensions: 144/144/H93 mm -Weight: 1 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 100 V - 500 V -Installation dimensions: LxWxD approx. 140x140x80 mm -Dimensions: 144/144/H80 mm -Weight: 0.7 kg

CNC control, control panel, machining center, server cabinet -I/O Control: control panel -Dell: Desktop KXGVD -Dell: Optiplex 390 Tower -Dimensions: 505/640/H1600 mm -Weight: 72 kg

Progressing cavity pump Manufacturer: Wangen Type: KL 505S-50.4 Item #: 900,588 Year of construction: 1995 Pressure: 4-10 bar very good condition with plug & on-off button LBH: 2800 x 300 x 320 mm

DIGGING BUCKET 1,500 mm attachment tool, excavator bucket bucket with teeth

Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings -Needle bearing: roller bearing -Inside: Ø 500 mm -Outer: Ø 549 mm -Width: 175 mm -Weight: 29 kg

Bandwidth.. 1,500 mm Band thickness. 0.7 - 4.0 mm Coil weight... 20 to. Velocity 14 m/min. Working direction right/left

Clever titulator with steam tunnel. 2 pieces available Year of construction 2004 and 2005 Type: GS 501 Capacity: 11,000 fl./h > 18,000 fl./h

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo type DNU-80-500-PPV-A -Piston diameter: 80 mm -Stroke: 500 mm -Max. Pressure: 12 bar -Pneumatic damping: adjustable on both sides -Dimensions: 730/155/H95 mm -Weight: 6.9 kg

Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 500 mm -Piston rod: Ø 20 mm -Number: 2 pieces available -Price: per piece -Dimensions: 685/65/H65 mm -Weight: 4.2 kg

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 500 mm -Length extended: 980 mm -Width: 22 mm/height: 69 mm -Price: per pair (left right) -Number: 2x pairs available -Weight: 4.45 kg

FIS stirred tank 500 liters Manufacturer unknown, boiler is double-walled and can be heated, in a good used and functional condition. The device runs on 400 volts, completely stainless steel, workshop tested, immediately ready for use, Dimensions W/D/H 130/9100170 cm more on request.

HM501, 3-fold head stitch 70. New Beckhoff PLC (Retrofit 2021)

Motor centering flange, motor flange, pump flange, motor centering bell, clutch bell, bellhousing for large pumps, hydraulic pump, oil pump, gear pump -small recess: Ø 75 mm -Large recess: Ø 115 mm -Dimensions: Ø 180/H41 mm -Weight: 0.5 kg

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 150 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Price: per piece -Number: 6 pieces -Dimension: Ø 36 x 300 mm -Weight: 0.95 kg/piece

Available in stock 2 x Used Capstone User Connection Boards. Most commonly used for Microturbines C30. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 1 x Used Capstone ECM Board. Most commonly used for Microturbines C60. The board is complete with all parts. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

SPECIFICATIONS: Length of work table mm: 2700 Width of work table mm: 500

C-shaped screw clamp, screw clamps, steel construction clamps, clamps, clamping tools -Span width: approx. 500 mm -Clamping depth: approx. 200 mm -Dimensions: 650/290/H40 mm -Weight: 5.7 kg

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 50 mm -Piston diameter: 32 mm -Piston rod: 12 mm -End position cushioning: adjustable on both sides -Price: per piece -Number: 4 pieces -Dimension: Ø 38/218 mm -Weight: 0.55 kg/piece

Available in stock 2 x Capstone Dump Valve. Complete with flexible tube. Most commonly used for Microturbines C30. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request. Voltage: 12 VDC Amps: Unit 1 - 0.135 Amps / Unit 2 - 0.750 Amps Power: 9 W Pressure: Unit 1 - 200 PSI Air/Gas / Unit 2 - 140 PSI Air/Gas

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 200 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Dimensions: 345/47/H47 mm -Weight: 1.0 kg

Demolition hammer, chisel hammer, Bosch hammer, mortising hammer -Length: 500 mm -Dimensions: Ø 25 x 500 mm -Weight: 1.5 kg

Available in stock 9 x Used Capstone Gas Fuel Injector. Most commonly used for Microturbines C60. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

85 ton x 2700mm 5 Axis back gauge Laser guards With Tooling

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Surface: very good -Width: 500 mm -Length: 800 mm -Height: 175 mm -Plate thickness: 26 mm -with: support ribs -Weight: 90 kg

Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Piston: Ø 40 mm -Piston housing length: 377 mm -Piston rod: Ø 20 mm -Recording hole: Ø 14 mm -Dimensions: Ø 40 x 530 mm -Weight: 1.5 kg/piece

2 fingers parallel external gripper, pneumatic, 52.81.3.500, FLT, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. 2 Finger Parallel External Gripper, pneumatic, 52.81.3.500 Manufacturer FLT (Fibro Läpple Technologie) Clear width closed 98mm Clear width open 122mm Gripper finger length front 60mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put int ...

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Mecman type: 167-05 5000-1 -Piston: Ø 50 mm -Piston rod: Ø 20 mm -Stroke: 370 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 63/63/600 mm -Weight: 2.75 kg

Available in stock 1 x Used Capstone TET. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 5 x Used Capstone Smart Proportional Valves. We have the following units available: - 3 x SPV Assy P/N 503044-200 complete with gaseous fuel valve P/N 506617-100 (Op. Press. 50 PSIG / Proof Press. 3500 PSIG); - 1 x SPV 25 24VOLTS P/N 511978-100R complete with gaseous fuel valve (Op. Press. 0-100 PSIG); - 1 x GSPV 12VOLTSD P/N 509736-100 complete with gaseous fuel valve (Op. Press. 75 PSIG / Proof Press 3500 PSIG): The unit are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Electric cross-cut saw KUSING SPS-500 Cross-cut saw with all-electric control without the use of pneumatic components. Technical parameters: Main motor power: 3kW / 4kW Diameter of the disc: 500mm Maximum cutting height: 160 mm Standard cycle speed: 4 seconds Option: The lifting speed can be infinitely adjusted depending on the load. Since it is possible to change the lifting speed even with a 3 kW motor, you can cut through high materials. Cycle speed: 2 - 6 seconds Ruler length and rails as needed. Price of the ruler: 85 euro/m Price of mechanical stop: 40 Euro / piece

Speed: 230 m/min, Full Automatic Adjustment Control, Touch & Work Technology, Memory Storage for Folding Programs, Flate Pile Feeder, 4 Pockets, 1 Knife, Anti Noise Hood, Delivery Conveyor, Standard Accessories

SUMAB R-500 MAX Fully automatic block line with concrete batching plant. Block line is in stock and ready for delivery! Technical details: • Automatic control model (with automatic operation equipment, including PLC, sensors, hydraulic valve's switching from manual to electrically operated) • Working pallet dimension: 1400 x 700 mm. • Operation area Max.: 1300 x 650 mm. With the SUMAB R-500 stationary block machine, the following concrete products can be produced in an efficient way: hollow blocks, insulated blocks, paving stones, curb stones and others. Production capacity in 8 h/100%: Hollow blocks: 12960 pieces (20x20x40 cm) Paving stone: 864-1016 m2 (10x20x6 cm)

3 pcs. Pfeiffer Balzers TPU 170 (turbomolecular pump) 3 pcs. Pfeiffer Balzers TCP 120 (controller for TPU 170) 3 pcs. cable for TPU 170 1 pcs. Alcatel Type 5150 (turbomolecular pump) 1 Alcatel CFF 100 (controller for type 5150) 1 Alcatel 5030 CP (turbomolecular pump) Price plus 19% VAT Not tested for functionality. Please see photos for technical data. Can also be picked up.

Eillert Salad spinner Model: MSD-500-V Serial: 188 2008, Stainless salad spinner, with three baskets, 1.5Kw, 3Ph

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -External diameter: 500 mm -Width: 50 mm -Inside diameter: 127 mm -Naxos Union: NK 16/11 P -Weight: 23 kg

Register punch EUROTRON IND-XR 500, year of construction 2004, serial number S1-2004-1, with adjustable X-axis and Y-axis see result Photo of test, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome, by prior appointment, to visit the machine in our house.

Planer Planer COMEVA MB 500 Working width 510mm 4-knife shaft Traditional knives Worktop length 2630mm Sampler tilted at an angle of 45° Engine power 4kw Uttering combs CE Certificate

Metal diesel tank - approx. 500 litres capacity - with frame and hand pump - can be driven under by forklift - - - - - Dispatch: - A Germany-wide transport is possible for an extra charge - In order to be able to give an exact freight price please send me a request with your postal code - - - - - Price: - 850,- € + 19 % VAT = 1.011,50 € - An invoice with VAT is issued - Payment: Prepayment - - - - - Other: - Sale of used machinery in actual condition to traders without warranty

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Outer diameter: 505 mm -Width: 65 mm -Interior diameter: 51 mm -Weight: 32 kg

Sandpaper, emery paper, abrasive cloth, sanding discs, grinding wheels -Outer diameter: 505 mm -Width: 65 mm -Inside diameter: 127 mm -ENR.625 EK-30/3-M-KE -Price: per piece -Number: 3 pieces -Weight: 27 kg

Standard configuration Machine ? Closed machine frame with integrated laser unit ? Motion unit for high precision processing ? Gantry drive in combination with direct linear drives ? Automatic pallet changer ? Longitudinal conveyor for small parts / slag ? Enclosed beam delivery system ? 19? Touch screen ? Working area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine ? Automatic nozzle cleaning Trumpf Laser ? New generation CO2-Laser TruFlow 6000, energy-efficient ? Maintenance-free radial turbine blowers ? Radio-frequency excitation ? Laser control TASC ? Laser power control ? Logbook function Laser Laser cutting head ? Laser cutting head with 250 mm lens ? Universal quick-change device UTI ? LensLine with status control ? ControlLine: Height regulation and sheet edge sensing ? Lens with RFID-chip Control ? Easy shopfloor programmi ...

Standard configuration ? Closed machine frame with integrated laser unit ? Laser unit: CO2 laser TLF 5000, radio-frequency excited, maintenance-free turbo radial blowers, chiller, logbook function ? Automatic pallet changer and longitudinal conveyor for small parts / slag ? HI-LAS high pressure cutting ? Plasma sensor system PSS ? Automatic sheet edge detection ? APC Advanced Process Control ? PCS Process Control System ? Programmable power cycles ? Microweld ? Automatic nozzle cleaning ? Programmable cutting gas pressure setting ? Laser cutting head with 5? lens and laser cutting head with 7,5? lens ? Cutting head quick-change device ? NitroLine ? Positioning laser diode ? PlasmaLine ? SprintLine ? ContourLine ? ControlLine ? PierceLine ? FocusLine ? Laser power control ? Oil spray device for reliable thick plate machining ? Automatic shutdown ? Work area lighting ? Sinumerik 840D con ...

Standard configuration ? Solid machine frame with integrated laser unit ? CO2 laser TLF 2700, radio-frequency excitation, chiller ? Motors: maintenance-free 3-phase servo motors ? NitroLine High pressure cutting ? High-speed processing with SprintLine ? Programmable cutting gas pressure ? Laser cutting head with 5 lens, DIAS III ? Cutting head-quick change device ? ControlLine ? Laser power control ? Laser logbook function ? Automatic shutdown ? Work area lighting ? Sinumerik 840D control: Open PC-based control system, easy to use, Online help, diagnostic functions, maintenance logbook, technology data,Teleservice, 3.5 floppy drive, RJ45/BNC network connection ? Safety: Multi-beam light barriers, completely encapsulated and purged beam delivery, monitoring system, multi-chamber exhaust system and compact dust extractor, safety cabin with Macrolon panels ? Part removal station PRS 3001  ...

Standard configuration ? Stable C-frame ? Coordinate guide with integrated linear magazine, 18 tool stations, automatic tool changer, 3 clamps ? Automatic parts chute 500 x 500 mm ? Parts container ? Drives: Maintenance-free, three-phase servo motors ? Programmable presser foot for repositioning ? Punching head: Hydraulic single tool adapter, 360? rotation of all tools, automatic tool length compensation, spray tool lubrication, 2nd lubricant container, programmable stripper movement, vacuum slug removal, swarf bucket ? Control: 32 bit microprocessor control TRUMAGRAPH CC 220 S, 10.4 color screen, programmable logic controller, easy to use, diagnostic functions, graphic programming TRUMAGRAPH, integrated 3.5 disk drive, RJ45 network connection ? Safety: CE marking, multi-beam light barriers, rapid hydraulic shutdown Additional equipment ? Function MultiTool ? Pneumatic repositioning  ...

Loading device LoadMaster including loading station with fanning magnets Loading Sheet size: 3000 mm x 1500 mm Min. sheet size : 1000 mm x 1000 mm Max. sheet thickness: 25 mm Max. sheet weight: 900 kg

Clamping plate, plate field, welding table, welding table, plate boring mill, straightening plate, tool holder -with: holes -Width: 400 mm -Length: 500 mm -Height: 30 mm -Weight: 45 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Drive from forklift: Still type EFG 1.0 / 5002 -Motor: 24 V -Power: 4 kW -Pole circle: O 270 mm M16 -Dimensions: 740/405 / H375 mm -Weight: 157 kg

Standard configuration Machine ? Closed machine frame with integrated laser unit ? Motion unit for high precision processing ? Gantry drive in combination with direct linear drives ? Automatic pallet changer ? Longitudinal conveyor ? Enclosed beam delivery system ? One cutting head strategy ? Working area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine Trumpf Laser ? CO2-Laser TruFlow 6000 with optimized stand-by mode ? Maintenance-free radial turbine blowers ? Radio-frequency excitation ? Laser control TASC 3 ? Laser power control ? Logbook function Laser Laser cutting head ? Laser cutting head with 250 mm lens ? Universal quick-change device UTI ? LensLine with condition checking ? ControlLine: Height regulation and sheet edge sensing Control ? SIEMENS Sinumerik 840D ? Technology data is integrated ? Colour screen ? Automatic shu ...