sk 12 used for sale

Origin Prechamber Spark Plugs for TCG3016 and CAT CG132 Part Numbers 12344841 and 12344843 delivery time about 2 Weeks. Alternativ Spark Plugs on request

Origin Prechamber Spark Plugs MWM CAT Part Number 12344096 Delivery time about 2 Weeks. Alternative Spark Plugs on request

Origin Spark Plug MWM CAT No 12344098 Delivery time about 2 weeks Alternatively, Spark Plug on request.

Origin Spark Plugs MWM ,CAT for TCG2016 ,CG132 Part number 12453546 Delivery time about 2 Weeks Alternatively, Spark Plug on request.

Labeler Manufacturer BBK Type ESB 1207-1832 Suitable for self-adhesive labels The machine is used exclusively for applying lid labels to vials. Documentation available

Key data: 1270 mm, 610 mm, 720 mm

Inv. Num. : 9302 Type: MCV 1270 POWER Producer: MAS Created: 2002 Parameters: Control system: Heidenhain iTNC 530 Operating hours: 1000 h Tool magazine: 24 pieces Maximum vertical spindle speed: 10000 1/min X-axis travel: 1270 mm Y-axis travel: 610 mm Travel distances Z-axis: 720 mm Cone: ISO 50 Machine height: 3300 mm Machine length: 5000 mm Machine width: 3600 mm Machine weight: 11000 kg Equipment: Technical documentation Workpiece probes Tool probe IKZ (15 bar) 10/2020: Machine completely cleaned and repaired Air hoses of the machine replaced Tool/workpiece cooling hoses replaced Piston rod of tool magazine sealed Air/oil clamping distributor sealed Piston seal of tool clamping sealed at the top of the spindle Automatic lubrication of the machine tested 8/2022: Main power module from SIEMENS completely repaired AC/DC converte ...

Suitable for cleaning coolant oil for grinding carbide. Accesories: 2 filter towers, automatic backwash., container content: 800L, flow capacity max: 100L/min., Filter fineness:: greater than 0.003mm, Connected load approx.: 4.0kW (400V/50Hz), Dimensions W x D x H: 1650 x 1000 x 2000 mm, Weight approx.: 1000 kg, colour: Grey

Only 5 hrs. Traded-in from customer who needs more power., Warranty is still applicable., Used Generator Set.; Gross weight [kg]: 1825; Engine: Perkins 1106A-70TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 320

planetary mixer Find more here - .ucymachines/ Contact us at - sales@ucymachines

x-travel: 1200 mm y-travel: 400 mm z-travel: 460 mm table-size: 1500 x 400 mm control: konventionell tool adaptor: SK40 turning speed range: 45 - 2000 U/min quill stroke: ja mm total power requirement: kW weight of the machine ca.: 3,2 t dimensions: 2,8 x 2,5 x 2,1 m Equipment: - ELESTA digital display - Infinitely variable feed - Coolant system - Horizontal milling attachment - Chip guard - Chip trays - Hydraulic machine vice - Machine light - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

STRASSBURGER Cross-Flow Filter MCC 120/6-C17 Features: Length 1100 mm Width 800 mm Total height 2200 mm Output 3,000-5,000 litres per hour, depending on the turbidity content Technical documentation available

Manufacturer: Schmoll Year of manufacture: 2011 Model: LM SERIES, Variant A-LM 2-125 Type of machine: Automatic drill including automatic loading Air pressure: 6.5 to 8.0 bar Air consumption: 260 NL per minute Electrical connection: 13 kVA Nominal voltage: 400V, 50/60 Hz Circuit diagram: QV72KFK9+B36D_K1 The machine has 54,147 operating hours. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Impressions=0 m, Condition= New , Availability= 2026-07-07, Servo Feeder Pre-Folding Section Side Gluing Crash Lock Bottom Bottom Gluing Unit (Left Side) Folding and Closing Section Motorized Trombone Section Folding and Closing Section Pressing Unit KQ” Brand 3 Cold Glue Guns Pneumatic Press LED Display Maximum Carton Weight: 800 g/m² Carton Type: B, N, E & F Flute Maximum Speed: 500 m/min Max. Folded Carton Thickness: 15 mm

Impressions=0 m, Condition= Good , Availability= 2026-07-07, With chases and frames In a good condition Can be seen in our warehouse in Istanbul Available on October 2021

Key data: 1320 KW, 400 V

MTU Gas CHP 12V4000 GS Gas electricity and heat generator from 2015, 64,000 operating hours, with control, without heat exchanger. 1,287 KWel x 1,500 rpm, 400 V / 50 Hz. AC generator: Stamford PE734F2, 1,935 KVA Manufacturer: MTU Model: 12V4000 GS Type: Gas CHP Serial Number: 94030700109 Power [KWel]: 1,287 Engine: MTU 12V4000 L33F Engine Serial Number: 526 108 959 Engine power [KW]: 1,320 Year of Make: 2015 Hours: 64,000 Weight [kg]: 12,000 Dimensions LxWxH [m]: 5.00 x 1.80 x 2.35 AC Generator Stamford PE734F2 Manufacturer: Stamford Model No.: PE734F2 Type: AC Synchronous Generator Serial number: A15H321210 Power [KVA]: 1,935 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 2.792 Year of Make: 2015 Hours: 64,000

Year of Make: 1992 Line 1 (PS, PP) Extruder screw diameter: 120/90/45mm Maximum gross plant output: 500 kg/h Film thickness range: 0.20–2.00 mm Maximum winding speed, 76 mm core 40 m/min. Maximum winding speed, 152 mm core 40 m/min. Maximum winding speed, 200 mm core 40 m/min. Available film structures: C/AAB, C/BAB, C/BAA Legend: A – Main extruder B – Co-Extruder C – Co-extruder (gloss layer) Additional function: The system is capable of winding two film webs at the same time.

General SKU268U459 MakeBunting Titanium No.F7827 Year of construction1990 Mounted on legscheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialTitanium Volume1200 Ltr. Motor0.55 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity±1300 Ltr. Vessel sizesDia: 1150x1800mm Conical bottomcheck Dished top sidecheck Manholecheck Top connectionsDia: 47mm(4x), 70mm (3x), 100mm OutletDia: 70mm With jacketcheck With propellor stirrerdouble Motor0,55kW, 230/400 Volt, 675 rpm With jacketcheck Stainless Steel Reactors MaterialYttrium, Titanium Beta C, Stainless steel 1.4306 (304L), Titanium General LocationBarneveld Floorspace1,5x1,5m Total height3m Weight1300kgPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechno ...

Overview This cold glue labeling machine was manufactured in 2000 by Krones. The machine is designed for the application of cold glue labels on bottles. The machine is equipped with three labeling aggregates (front, back, and neck/seal label) and operates with a 20-head rotary table, making it suitable for medium-speed beverage production lines. The unit includes an integrated Krones Checkmat inspection system for quality control and comes with 11 bottle formats (0.5 – 1.0 L). Maintenance was performed as required. Technical data Capacity: up to approx. 15,000 bph Formats: 0.5 L – 1.0 L, 11 formats Application: Cold glue labeling of bottles Configuration: 20-head rotary table, 3 labeling aggregates Label positions: Front, back, neck/seal label Utilities: Standard Krones control system Incl. 3 glue pumps for cold glue system, Inspection system (Krones Checkmat), Format parts, D ...

Overview  This cold glue labelling machine was manufactured in 2004 by German company KHS. The machine was running until January 2025 and is now stored in the company. The labeller has a camera system for the orientation of the labels in the neck area for swing-top glass bottles. Technical data  Capacity: Up to 26,000 bottles per hour Working direction: anticlockwise Formats: 330 ml Longneck glass bottles 330 ml Steinie glass bottles 330 ml Swing-top glass bottles 500 ml NRW glass bottles Label positions: Front (up to 2 labels) Back (up to 1 label) With a Siemens S7 control New HMI touch panel in 2019

Technical Specifications & Performance Data The Used Case Erector Ape 1994 is a robust secondary-packaging solution from APE Impianti, model Form 1200 HM. Designed to erect corrugated cases for downstream packing, it supports beverage and food applications where consistent case integrity is crucial for high uptime in a used bottling line or broader industrial packaging environment. Manufacturer: APE Impianti Model: Form 1200 HM Year of manufacture: 1994 Category: Case Erector (secondary packaging) Closure system: Configured for hot-melt adhesive sealing (per HM designation); tape or other options subject to configuration Operational status: In storage; manuals available for setup, operation, and maintenance Typical application: Case forming for packing PET bottles, glass bottles, aluminum cans, or mixed formats for water, juice, beer, wine, and other beverages Throughput: Format- and mat ...

Used Compressor Siad 1999 Looking for a reliable compressor to meet your high-pressure needs? We have just the machine for you: a SIAD MS2/1242-B2 compressor, manufactured in 1999, with only 238 operating hours. This compressor is an excellent choice for those requiring powerful, dependable, and high-pressure-capable machinery. The SIAD is equipped with a single stage and delivers a pressure output of 50 bar, with a power output of 299.9 kW. It’s ideal for heavy-duty, high-pressure applications in a range of industrial processes. The compressor comes with built-in safety features, and manuals are provided for troubleshooting if required. This compressor is currently in storage and has been well-maintained. With dimensions of L: 5900 mm, W: 3000 mm, H: 2500 mm, it fits well in any industrial space. It is a versatile machine that can handle various applications, making it suitable for us ...

Technical Specifications & Performance Data The PakTech CCA 120 is a compact, high-reliability can holder applicator designed to apply plastic carriers to beverage cans with consistent accuracy. As part of a used bottling line or canning line, this second hand unit brings proven PakTech engineering to industrial packaging environments seeking dependable multipack presentation. Manufacturer: PakTech Model: CCA 120 Year: 2016 Machine type: Can Holder Applicator Nominal speed: up to 120 cans per minute (format and line conditions dependent) Container types: Aluminum beverage cans Formats: Compatible with common PakTech carrier styles and multipack configurations (subject to tooling and kit; verify in manuals) Dimensions: Width 2440 mm, Length 1230 mm, Height 1500 mm Electrical: 220V Safety features: Integrated guarding and protections Documentation: Manuals available Advanced Automation & C ...

  - Build with double hirth coupling - T slot 22 with Jump off 200 mm - Diameter off center hole 50 mm

- Fixed steady rest 4 units - Fixed table dresser for stone dressing - Face plate head and rear support ca 800 mm - Stone grinding speed 27-24 M/Sec - Coolant and filtration system - In feed stone 0,0025 mm - Acurite Dro with Heidenhain scales - Maximum segment wheel 1600 mm

The SAFAN H-Brake 120-3100 TS1 is a robust hydraulic press brake designed for consistent accuracy, high uptime and fast changeovers. With 120 tons of pressing force and 3100 mm bending length, this model delivers reliable performance for demanding production environments. As a used SAFAN H-Brake 120-3100 TS1 from 2005, this second hand machine combines proven SAFAN build quality with smart options that keep your shop productive. What this means for you - Capacity and flexibility. 120 T pressing force and 3100 mm bending length handle a wide range of parts in steel, stainless and aluminum. - Accuracy across the full length. Wila CNC Crowning and a throat depth of 400 mm help maintain consistent angles and reduce rework. - Fast setup. Wila New Standard hydraulic tool clamping speeds up tool changes and shortens lead times. - Controlled precision. Independent Y1 and Y2 with X, Z1, Z2 and ce ...

- New hydraulics 2015 - Bed length 3540 mm - Stroke in X 1200 mm - Stroke in Z   300 mm - Speeds 18 steps from 6 to 675 Rpm

- Vario matic Rotation / Angle - Remote control with Dro - Very littles used - incl. 2000 mm false chuck  - CE-Marked 

Overview  This PET filler was manufactured in 1999 by Germany-based KRONES. It is suitable for filling carbonated soft drinks in PET bottles and is equipped with a Pick&Place neckhandling system. The machine is immediately available and can be inspected upon request. Technical data  Capacity: 27,000 b/h at 1.0l PET 25,000 b/h at 1.5l PET 22,500 b/h at 2.0l PET Formats: 1.0l, 1.5l, 2.0l PET bottles Closure: PCO 1881, plastic screw caps Filling system: Isobaric Number of filling valves: 126 Capper: Screw capper 720-18-126 (Alcoa) Running direction: Right-Left (anti-clockwise) Neckhandling with Pick&Place-System Product: Carbonated soft drinks (8 g/l CO₂, 20°C) Machine pitch: 144 Machine safety: Full guarding – lifting version Control Unit: Siemens S7 Accessories: Krones Checkmat Scope of Delivery Krones Sensometic VP-I-PET filler Screw capper by Alcoa (720-18-126) Krones Checkmat Pi ...

Overview This self-adhesive labelling machine was manufactured in 2000 by Germany KRONES. The Autocol 1200-20 TA is designed for the application of self-adhesive labels on bottles. The machine is configured with three labelling stations (front, back, and neck/seal label) and includes a Taxomat label feed system. It is suitable for standard beverage packaging applications and is equipped with an integrated Checkmat inspection system for quality control. The machine is currently still installed and will be available from February 2027. The unit is described as used and maintained based on operational requirements. Technical data Capacity: up to approx. 15,000 bph Formats: 0.5 L – 1.0 L (15 formats) Application: Self-adhesive labelling of bottles Configuration: 3 labelling stations (front / back / neck/seal) Label positions: Front, back, neck/seal Incl. Inspection syst ...

A Sandern vacuum calibration and cooling tank is offered. Max. pipe diameter: 125mm, tank length: 6000mm, number of chambers: 2. Dimensions X/Y/Z: 6500mm/1000mm/1500mm, weight: 1500kg. Inspection by appointment possible.

Printing Specifications Printing process Flexographic Number of colours: 8 Maximum material width: 1280 mm Maximum print width: 1200 mm Minimum repeat length: 380 mm Maximum repeat length: 840 mm Maximum machine speed: 300 m/min Equipment Drive system: Fully automatic, gearless Ink pump system: Phonematic with AutoWash Web guiding / Camera system: FIFE Anilox Rollers Quantity: 8 Face length: 1260 mm Engrave length: 1240 mm Outside diameter (OD): 171.88 mm Inside diameter (ID): 149,722 mm Printing Sleeves Quantity: 8 Inside diameter (ID): 114,708 mm Face length: 1210 mm

work piece width: 1.200 mm workpiece height: 500 mm bore diameter: 8 - 40 mm Number of drilling agregates: 3 Stk. spindle speed:: 150 - 1.100 U / min tool changer: 15 Stk saw blade diameter: 1.430 mm cutting speed: 8 - 30 m/min total power requirement: 43 kW weight of the machine ca.: 20 t dimensions of the machine ca.: m Working Capacity Angle sections: 80 × 65 × 10 mm to 250 × 250 × 28 mm Channel sections: 80 × 45 mm to 400 × 110 mm I-beams: 80 × 46 mm to 600 × 220 mm Wide flange beams (HE): 100 × 100 mm to 1,008 × 302 mm Special wide flange and welded T-beams: up to 1,200 × 500 mm Workpiece Data Max. workpiece width: 1,200 mm Max. workpiece height: 500 mm Drilling Unit Number of drilling spindles: 3 (1 vertical, 2 horizontal) Drilling diameter: 8 – 40 mm Spindle speed: 150 – 1,100 rpm Drilling feed: 0 – 500 mm/min Rapid approach: 3,850 mm/min Rapid return: 8,000 mm/mi ...

Hydraulic injection moulding machine manufactured in 2001. This Krauss Maffei 125-520 C1 features a clamping force of 125 T and a screw diameter of 45 mm. It has a shot volume of 275 cm³ and a platen size of 745 x 770 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 125-520 C1 machine we have for sale. Contact us for further details.

working width: 1000 mm container volume: l battery: 24 V Number of working hours: h working area:: m²/Std. weight of the machine ca.: 0,75 t dimensions of the machine ca.: 1,7 x 1,0 x 1,4 m Ride-on sweeper - incl. charger The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1270 mm, 610 mm, 720 mm

Inv. Num. : 9330 Type: MCV 1270 R Producer: MAS Generated: Parameters: Work table length: 1500 mm Work table width: 670 mm Maximum table load (uniform): 1200 kg X-axis travel: 1270 mm Y-axis travel: 610 mm Travel distances Z-axis: 720 mm Machine height: 3330 mm Machine length: 5000 mm Machine width: 3600 mm Machine weight: 11800 t Equipment: Grips Vise

Shelf press for veneering SIPA 2500×1280 Shelf length 2500mm Shelf width 1280mm Load height 440mm Operating pressure 120bar Press on 4 cylinders Shelves heated with boiler water

Dima rolvormlijn voor de productie van Hibond 55 profielen - voor betonnen vloeren. De Hibond 55 is een 55 mm diep trapeziumvormig vloerprofiel dat wordt gebruikt als lichtgewicht vloeroplossing. Diktebereik: 0,75 gt; 1,5 mm Maximale plaatbreedte: 1200 mm Rolvormlijn: - 13 + 10 stands - asdiameter: 100 mm - center-center afstand tussen rollen: 180 gt; 350 mm

A Konica Minolta digital monochrome production printing system is available. Print resolution: 1200dpi/1200dpi, max. print speed per minute A4/A3: 120pages/70pages, grayscale: 256, max. paper dimensions X/Y: 324mm/483mm, max. paper size: SRA3, max. media weight: 350g/m². Machine dimensions X/Y/Z: approx. 3800mm/1100mm/1500mm, weight: approx. 1000kg, total counter: approx. 9.3 million. Including 3 large-capacity paper trays, RU paper transfer unit, FS stapling and hole-punch unit, and one large-capacity output tray. Documentation available. An on-site inspection is possible.

1200 litre process vessel Manufacturer Prai HiPurity Systems Ltd. Type IMV – 1200 W, H – 14471 unused Year of construction 2015 electro-polished Double-jacket, pressure-resistant Product room 3 bar Double jacket 4 bar Operating temperature 165° C Magnetic agitator on the underbody, Fabr. Merck Millipur Type GMP Drive 2000 Extensive documentation available, including qualification documents

TECHNICAL DATA: Working dimensions: max. 1200 x 100 x 65 mm 05 Spindles with M10 right-hand thread 02 Spindle motors Complete with feeding device 03 Vertical Pressure Devices 03 Horizontal Pressure Devices Installed power: 6 kW

Scoring unit: - kW Dimensions (L/W/H): mm machine weight ab.: 900 kg Rear feed width: mm Cutting length: 5300 mm Motor output: 4,6 kW Cutting height: 2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting length: 4.300 mm Cutting height: 1.800 mm Motor output: kW Scoring unit: - kW Dimensions (L/W/H): mm machine weight ab.: ca. 600 kg kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used MBF Synchrofil LV filling monoblock 7000 BPHTechnical Specifications & Performance DataThis MBF filling monoblock delivers reliable performance for beverage production within a used bottling line or as a standalone station in industrial packaging environments. Built for hot and cold filling processes, it provides steady output and quality control for second hand bottling operations seeking dependable equipment.Manufacturer: MBFModel code: LV 1200-35 / 240-4VYear of manufacture: 2001Production speed: 7000 bphFiller configuration: 35 valvesFilling technology: Gravity with light vacuum (low vacuum)Capping: alluminio MCA 28x15 mmRotation direction: ClockwiseWorked formats: Compatible with 0.5L and 1.0L bottle formatsDesigned for bottle handling: Cylindrical containersElectrical supply: 380 V, 50 HzCompressed air consumption: 200 Nl/min at 0.6 MPaMachine weight: 4000 kgSafety features: I ...

Cauhe S-IV A 120×160 Hot Stamping Press - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Cauhe S-IV A 120×160 Hot Stamping Press Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Cauhe S-IV A 120×160 Hot Stamping Press Price: 37500 EUR Download PDF Cauhe S-IV A 120×160 Hot Stamping Press The machine is fully operational, like new. Made in Spain. Format: 1200x1600mm Weight: 10,000kg Power supply: 380V Motor: 11 kW Impact force: 2 Tm/dm² Equipment: – Pneumatic clutch and brake – Control panel – Full-format heating plate with 3 heating sections – 3 operating modes: continuous, time ...

Baumann Wohlenberg BSW3-1200 Pile Turner - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Baumann Wohlenberg BSW3-1200 Pile Turner Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Baumann Wohlenberg BSW3-1200 Pile Turner Price: 16250 EUR Download PDF Baumann Wohlenberg BSW3-1200 Pile Turner This machine is like new, fully functional, and ready to work. The most equipped turner offered by the German manufacturer Baumann Wohlenberg. This is the currently produced model. Year of manufacture: 2017. Technical specifications: Plate format: 1440 x 850 mm Stack height: 1450 mm Load capacity: 1200 k ...

TINSMACAL brand stainless steel reactor of 1200 liters. Year 2006. Three-blade helix agitation. Motor 2.2 kw 955 rpm 50 hz 220 v Manhole of 350 mm diameter. On 3 labels. Equipment Setup Agitator About Labels Stirring System Two-height three-blade helix agitation Equipment dimensions Inner diameter 1190 mm Body height 1400 mm Transportation Information Width 1800 mm Height 2750 mm Weight 980 Kg In your state

Csepel RF50/1250 Radial Drilling Machine Robust and proven radial drilling machine of the quality manufacturer "Csepel" model RF50/1250. The machine is characterized by its solid construction and is ideal for locksmiths, workshops or demanding do-it-yourselfers. Technical data (according to nameplate): Manufacturer: Csepel (Budapest) Type: RF50/1250 Type of current: 3~ (three-phase current / 380 V) Frequency: 50 Hz Control voltage: 220 V Operating current: 10 A Required fuse: 16 A slow blow More items - new and used - can be found in our shop! International shipping costs on request!

A complete Facma/Cerquetani hazelnut harvesting and processing line for processing hazelnuts from crop reception through sorting, cleaning and grading is available. 1) Facma hazelnut harvester. 2) Ditta Cerquetani Antonio collection and transport trailer. 3) Facma combined processing, cleaning, rotary screen and screening unit. 4) Facma washing and wet cleaning unit. 5) Drying system with drying silo, blower and electrical control cabinet. 6) Facma inclined conveyor with feed hopper. 7) Facma horizontal conveyor and selection belt. 8) Facma sorting, inspection and grading table. Including various peripheral equipment and accessories. Documentation available. Inspection on site is possible.

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 7753; Engine: Perkins 4008-30TAG3; Accessories: Battery, Control Panel, Including : coolant heater and battery charger

Key data: 1250 mm, 1 mm

Qty. 1 Second-hand cut-to-length line including straightening, polishing and grinding units Manufacturer: UNGERER / GEORG, EMG, IMEAS Built: 1986 / 1997 /1998 / 2009 still in operation Material: stainless steel Strip width: 500 – 1.250 mm Thickness: 0.40 – 1.00 mm Coil weight – DECOILER max.: 10.0 t RECOILER max.: 5.0 t Coil ID – Ø 500 mm OD – Ø 1.500 mm Sheet length: 500 – 6.000 mm Stacking weight max.: 4.000 kg Working speed – grinding max. 20 m/min. Working speed – grinding + brushing: 4 – 12 m/min. Working speed – brushing: 4 – 6 m/min. Working speed – cutting max.: 20 m/min. Working direction right ⇒ left Length tolerance ± 0.40 – 3.000 mm