sk 12 used for sale

thickness of jaw: 125 mm tension force: 40 kN machine weight ab.: 40 kg range L-W-H: x x x mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spiral mixer Diosna SP 120 D Diosna Model: SP 120 D Kneading machine mobile 2 timers, 2 gears Stainless Steel Boiler Flour dust hood for max. 120 kg dough Dimensions: 800 x 1270 mm WxD Connection: 400 V, 32A-CEE plug Used machine cleaned Option: Maintenance contract Service Package E-Box for more security! Delivery Instruction & Commissioning

Key data: 430 mm, 1260 mm

Control MORI SEIKI ... MSX-850 MAPS II Turning diameter ... 430mm Turning length ... 1260mm Inclined bed Axis Y ... +- 60mm Spindle bore ... 105mm powered tools ... 10 Axis X ... 280mm Axis Z ... 1370mm Circumferential diameter over bed ... 995mm Circumferential diameter via support ... 825mm Spindle speed ... 1-3000 rpm Axis C ... 0,001° Motor power of driven tools ... 5.5kW Main engine power ... 25/30kW Max. spindle torque ... 1000/1300Nm Machine weight... 8100kg L x W x H ... 4532x2291x2390mm The machine is in good condition, possible to test under power.

A non-automated BITO pallet racking system is available. Bay width: 3600mm, max. shelf load capacity: 2300kg, shelf spacing: 1725mm, upright type: P20, load carrier: Euro pallet, pallet dimensions X/Y: 1200mm/800mm, pallet weight: 500kg, max. bay load at 1725mm buckling length: 16000kg. Documentation available. An on-site inspection is possible.

Transnorm conveyor belt GF 1200-600-500 RA2424 Technical data: Conveyor length (NL): 1200 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,85 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm welded again before sale Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor spe ...

BANDERA BLOWN FILM EXTRUDER, for PE, Bandera extruder with screw diam.90 mm., 250 mm die diam. on original Bandera head, reconditioned (not the one in photo), a.c. drive with inverter, calibrator, haul off unit, corona treatment, single color small printing group, single winding station with manual discharge 1.200 mm., good overall conditions, availability: immediate, working width: 1.200 mm., conditions: good

Besturing: Siemens Sinumerik ( achteraf ingebouwd) Worklength with magnetic table: 2000 mm Grindingwidth: 1250 mm Longitudinal travel X-axis (autom.): 2000 mm Cross-travel Y-axis (autom.): 1250 mm Travel Z-axis (autom.): 1200 mm Dimensions of the table: 1250 x 1250 mm Dimensions magnetic table : 1250 x 1250 mm Motorpower: 30 kW Cooling system: yes

Kemper Spiral Mixer Type: SP 125 A Specifications: 2 Automatic timer switching on and off 2 speeds slow and fast with 3 stainless steel boilers Stainless Steel Boiler and Spiral with flour dust cover square head Boiler capacity approx. 250 litres Machine has been overhauled and repainted Electronics new All bearings new All belts new Friction wheel new Wear parts all new Engine mounts all new New button Wheelchairs new Hydraulic oil new completely repainted

Modular vise, jaw width 125mm Gerardi Modular 125 Stable Machine Vise, Drill Vise Total length approx. 345mm Clamping range approx. 150mm Jaw width 125mm with pull-down jaws Additional prism jaw Mechanical clamping actuation with 19mm wrench or ratchet The machine can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".

Reference Num.: 4242 Brand: Xerox Type: Nuvera 120 EA Impressions: 10 mio Available: directly Status: Not in production Location: Deutschland

Subject to prior sale - errors possible! Internal reference number: D-1143-5

Ice water system

used Forstner slitting line, control left, 0-line right, with motorized cross shear, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run was carried out. Working width: 250 - 1250 mm Sheet thickness steel: 1.5 mm Sheet thickness aluminium: 1.5 mm Colour: blue/yellow Total power requirement: 400 V Machine weight: 775 kg Dimensions: 1500 x 2200 x 1500 mm Coil weight: 2 t without straightening rollers Number of blades: 5 pairs Knife shaft diameter: 100 mm Speed: 25 m/min without bevel cut Coil width (max.): 1250 mm Maschinennummer/Machine number 102728 MST

Gantry type longitudinal planer SN: 185090406.; Working table dimensions 4180 x 1100 mm. Power supply 380 V.

GAMMAMECCANICA TANDEM SYSTEM 125 mm. 950 kg/h double screening, Throughput rate up to 600-950 kg/h ca, depending on material and feeding rate (0,30-0,40 Kwh/kg), Line suitable for the recycling for heavily printed, high humidity and contaminated materials., High performance degassing chamber for removal of up to 10 times more gas and humidity in the melted material compared to other systems (so you can save on the cost of an agglomerator), The line includes :, Loading conveyor belt, tunnel metal detector, automatic compactor, N.2 Dosing unit for masterbatches and more, 1st extruder with 125 mm. screw Ø 28 L/D, 1st degassing point, FIMIC RAS 500 fully aumatic screenchanger, control cabinet, 2nd extruder with 140 mm. screw Ø 18 L/D, 2nd degassing point, BD-PLAST non-stop screen-changer, TDA6 GM water ring pelletizer, heat exchanging unit, vibrating screen, blower, Water treatment unit ,  ...

Rack oven for rack trolleys 60/100 digital BSC 40 controller with ramp with Vario Pilot with gas burner - Bakery condition not cleaned

Conveyor belt - climbing belt 35 m Manufacturer Horstmann ? Length approx. 35000 mm Belt width 1200 mm Smooth belt troughed. Discharge height approx., 8000 mm Side protection and reinforcement in the feed area Roofing in the wider area. Control box and control In good condition Net price From location 12,000,-- euros I offer as an intermediary on behalf of the owner. The information is non-binding, the prior sale is reserved. Dismantling, loading and shipping on request! I am happy to answer any further questions you may have. Wilfried Goldmann +49 173 6242 600 (also WhatsApp)

Size: 800 x 1200 mm Equipments: Good condition without any damage Maximum stacking height: 1350 mm Minimum stacking height: 650 mm Platform width: 1250 mm

table length: 2400 mm table width: 1200 mm table height: 850 - 900 mm weight of the machine ca.: 0,65 t Welding table / perforated table: with milled and deburred holes Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side panels 165 mm Height adjustable from approx. 880 - 980 mm Ribbed underside for reinforcement. Including floor bearings Accessories optional! Surface flatness 0.2 - 0.4 mm over 1000 mm. The table can be moved with a pallet truck. Pallet truck is not included. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 keer op voorraad nbsp; + geleiding Capacity: 125 kg

Stock 14R5-P / 1250 P - laminating machine year 2004 max. size 1,250 x 1,640 mm min. size 500 x 500 mm paper 100-400 gm2 Solid Board max. 350 g Corrugated board max. 7 mm in production good condition

12 WINDERS, BARMAG CRAFT WINDERS CW6-1200/ 6 ENDS PER CHUCK , max. dia 440mm, stroke 170 mm

Besturing: Siemens Sinumerik (achteraf ingebouwd) Siemens-aandrijving: 6SN1145-1BA00-OCAO Worklength with magnetic table: 1270 mm Longitudinal travel X-axis (autom.): 610 mm Cross-travel Y-axis (autom.): 1310 mm Travel Z-axis (autom.): 565 mm Dimensions of the table: 1215 x 1250 mm Dimensions magnetic table : 1250 x 500 mm Distance between table -- spindlecentre: 680 mm Spindlespeeds: 0 - 2800 rpm Motorpower: 15 kW ACCESSORIES: yes Cooling system: yes

fire: SCM Technology, model: CM 1200 Mobile, Year of construction: 2010, Length: 11.000 mm, Width: 2.700 mm, box: 8.000 mm, Engine: Diesel engine, Cutting: 1000 x 900 mm, Stamper: 1 x 200 tons, General conditions: working, Cutting force: 1200 tons, Weight of machine: 53 tons

Key data: 1200 t, 1000 mm

Hydraulic Press Gigant 1200 ton Year of construction: 1993 Dimension table: 3700 x 2700 mm Dimension lower table: 3700 x 2700 mm removable Light max: 1590 mm Light min: 610 mm Slide stroke: 1000 mm Cushion stroke: 400 mm Side upright clearance: no

Siemens Megalix CAT 125/15/40/80-121 GW Focal spot 0.3/0.6/1.0 Tube Housing Model No. 5764522 Tube Model No. 3800351 • Before taking over, all devices or systems have been tested on site for their functionality. • The tube is located in our warehouse in Freiberg / Germany. • You buy the tube in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system component must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Working hours : 21.447 h Clamping force: 125 tons Tie-bar spacing (horizontal × vertical): 470 mm × 470 mm   Platen size (mould plate) approx: 745 mm × 770 mm   Minimum mould height (installation height): approx 300 mm   Mould opening (stroke): 600 mm   Maximum daylight between plates: approx 900 mm   Screw diameter: 40 mm   Injection volume: ~ 204 cm³ (≈185 g PS) in one similar spec sheet   Motor power / drive: 18.5 kW drive power (pump drive)   Heating power: around 11 kW  

: 1250 mm tank diameter / tank height: 1000 / 350 mm turning speed range: 920 / 1415 U/min voltage: 380 V volumn: 125 Liter power requirement: 1,9 kW weight of the machine ca.: 600 kg dimensions: 1,4 x 0,9 x 1,5 m Complete vibratory finishing system with conveyor unit See images The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Siemens Megalix CAT 125/15/40/80-122 GW Focal spot: 0.3/0.6/1.0 Tube Model No. 3800351 • Before taking over, all devices or systems have been tested on site for their functionality. • The tube is located in our warehouse in Freiberg / Germany. • You buy the tube in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system component must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Siemens Megalix CAT 125/15/40/80-122 GW Focal spot: 0.3/0.6/1.0 Tube Model No. 10144179 • Before taking over, all devices or systems have been tested on site for their functionality. • The tube is located in our warehouse in Freiberg / Germany. • You buy the tube in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system component must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

CTP plate setter Advantage DL+ Plate developing machine VPP 68 Find more here - / Contact us at -

Manufacturer: FRECH Model: DAW 125 S RC Year of Manufacture:1998 Type of Machine : zinc die-casting system Condition : The machine is fully functional and was used to manufacture bathroom accessories (shower handles). After just over a year of downtime, an oil change is required. Locking Force: 1250 kN Working Pressure: 105 bar Machine Weight: 6000 kg Rated Current: 40 A Rated Voltage: 3×400 V Control Voltage: 24 V Frequency: 50 Hz Find more here - / Contact us at -

Paletchanger 2 tafels Hoge druk koeling 15 bar Schroottransportband Maximale werkstukafmetingen: 3240 x 880 x 640 mm X-axis: 3000 mm Y-axis: 800 mm Z-axis: 585 mm Table dimensions: 3240 x 750 mm Max weight on the table: 3 ton Passage between uprights: 860 mm Admission in spindle (ISO): ISO 50 Power on the spindle: 30 kW Control : Mazatrol 640 Toolchanger: yes Number of toolholders: 40 positions Number of rotations: max 6000 rpm Number of pallets: (2x) 750 x 3240 mm Length: 3274 mm Depth: 8100 mm Height: 3546 mm Weight: 19 ton

plate width: 125 mm plate thickness: 2 mm straightening feed: 5-30 m/min total power requirement: 1,5 kW weight of the machine ca.: 460 kg dimensions of the machine ca.: m - Belt infeed height: 1,250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data of the pallet rack crossbar: Shelving system: META Thyssen The scope of delivery includes: 01x Pallet rack crossbar, used Material color: RAL2001 orange Truss type: HN 120|20 Box profile: 120 x 50 mm Agraffe: 4 HK (hooks) Clear width: 2,700 mm Max. load per pair of trusses 2,700 kg, with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Manufacturer: Burkhardt + Weber BW Model: MC 120 Year of Make: 1999 Condition: Used Control: Siemens Sinumerik 840C Pallet sizes: 4 pieces 1000 x 1000 mm, 2 pieces 1250 x 1000 mm, 13 pieces 1600 x 1000 mm Pallet system length: 47000 mm Clamping area: 630 x 800 mm Table load: 1500 kg Spindle taper: DIN 50 Spindle speed: 6000 rpm Engine power: 37 kW B-axis travel: 360° Tool magazine: 144 positions Fuel tank capacity: 230 l Spindle bearing and spindle housing overhauled 09/2024.

120 mm diameter pile driver suitable for Hammer HM100

100 mm diameter pile driver suitable for Hammer HM100

NEW, 140 cm wide, with Martin M10 mount, 123 kg net weight, suitable for 5.6 - 9.0 t excavators

2450 h, with 3 hyd. Side brush, 3-cylinder diesel engine, high dump, sweeping width: 1.52 m, maximum theoretical sweeping capacity 30,500 sqm / h, 1810 kg net weight, dimensions approx. 2480 x 1440 x 2030 mm

MODUL ZFWZ 1250x14I gear hober (can do 1580 mm) Max. Diameter: 1250 mm Cutting width: 600 mm Module 2-16 Maximum size of the hob: 240 x 280 mm Table diameter: 1020 mm Speeds: 28 – 200 rpm Axial feed rates: 0.28 – 8 mm/min Radial feed rates: 0.1 – 2 mm/min Tangential feeds: 0.16 – 4 mm/min Stand tilt – left/right: +/- 45 Main motor power: 5 / 19.5 kW Power of the rapids motor: 12,5 kW Max. diameter of the part without tailstock: 1,250 mm Max. diameter of the part with tailstock: 800 mm Weight of the machine : 16 t Machine dimensions approx. 4.5 x 2.1 x h 3.3 m EQUIPMENT: Extended driven shaft for gear cutting up to Ø 1580 mm Capability to work with hob cutters Ø 235 mm and length 380 mm. Inverter control of the main electric motor. Expanded set of change gears

cantilevered mixer 120l when filled with water approx. 100l usable volume with control box with stud work with ball segment valve as outlet 0 operating hours at the end customer

Total connected load 21.7 kW Bj Ud Devu Dncevycolp Pump motor 18.50 KW Weight 7,400 KG

1 gebr. Boiler -------------------------------- Manufacturer : LOOS Gunzenhausen Type : UL-S 1250 Heating surface approx. : 25 sqm Capacity : 1,000 kg/h Operating overpressure : 13.0 bar Increased test pressure : 24.7 bar Ab. Operating temperature : 195° C Water content up to NW approx. : 1.785 l Water content full approx. : 2.320 l CE marking : CE 0036 Year of manufacture : 2006 equipped with Weishaupt gas/oil burner GL5/1-D/ ZMD, separate control cabinet, gas control system, feed water pump, and the existing coarse and fine fittings.

1 gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD 1250 Heating surface approx. : 20 m² Boiler capacity max. : 1.250 kg/h Operating overpressure : 10.0 bar Increased test overpressure : 18.5 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of construction : 2008 CE mark : 0036 equipped with Weishaupt gas burner G7/1-D, ZMD, 300-1,750 kW, 15-500 mbar, gas control section, Control cabinet with touch panel, feed water pump, ECO and the existing coarse and fine fittings.

Recon Part Number: 527 140 06 08 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 527 140 03 08 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Clamping Force: 1000 ton // Shot Weight (Max): 6995 g

Volume (Ml): 125 ml // Format: Slim

Output: 15000 U/h // Bottle Size: 1500 ML