sk 12 used for sale

There are two identical pumps available, nominal suction capacity: 245m³/h, ultimate pressure: 100hPa, ultimate pressure (continuous operation): 200hPa, rated motor power: 5.5kW, rated motor speed: 3000/min, sound pressure level (ISO 3744), 1m distance, at medium load: 75dB(A), oil fill: 1l, gas inlet: G2, gas outlet: R1, length: 1050mm, width: 515mm, height: 450mm, weight: 240kg.

120651 Hoofdgedeelte van de fakkel NIEUW 2405 GEMAAKT IN DE VS 2 stuks op voorraad, NIEUW

General SKU335X748 MakeMöstl Anlagenbau GmbH LocationBarneveld CEcheck Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume128 Ltr. Motor0.18 KW Specified Features - Bioreactor Reactorcheck Capacity128 Ltr. Vessel sizesø 400 x 812 mm Dished bottomcheck Dished top sidecheck Top connectionscheck OutletDN35 with valve With jacket(23 Ltr.) Max. temperature0 / 150 °C With propellor stirrercheck Motor0,18kW, 230/400V, 1360rpm Speed mixing shaft270 With jacketcheck Bioreactors MaterialStainless steel 1.4404 (316L), Stainless steel 1.4435 (316L) General No.1738 Year of construction2019 Floorspace0,70x0,70 m Total height1,60 m Weight255 kg Extra SpecificationsElectrochemical polishing, surface roughness Ra ≤ 0.4 µmEquipped with CIP (Clean-in-Place) system ...

KIP Inc 2X1455 Solenoid Valve 006109 120V 10W

approx. 235 pieces order picking trolleys, Wanzl, 2 sizes – used - : Price for partial quantities (2 intermediate floors per car): Up to 30 pieces: 195.-€ (net) / piece Up to 60 pieces: 185.-€ (net) / piece Up to 120 pieces: 175.-€ (net) / piece Minimum order: 10 pieces Price for complete acceptance: 35.000.-€ (net) incl. loading! The special price is only valid for pick-up until week 41/2026! Type: KT3 1297 Type: KT3 1713 Manufacturer: Wanzl Type: KT3 1297 Year of manufacture: different e.g. 2012 / 2018 Load capacity: 300kg Load capacity per floor: 50kg Most of the cars are 1300 meters long. Some of the wider ones also have 1700 lengths. approx. 185 pieces are all wide (60cm deep) approx. 50 pieces are narrow The equipment with intermediate shelves is sometimes very different (see photos), on average there should be at least 1 – 2 interm ...

RLA 1213 Clean air extraction system 400V 1.5 KW Volume flow max. 1140 m³/h Suction nozzle 120mm Filter area of 5.1 m² Chip collection volume 135 litres mobile Weight of 121 kg G&STÜ-5131201

General SKU335X746 MakeMöstl Anlagenbau GmbH LocationBarneveld CEcheck Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume128 Ltr. Motor0.18 KW Specified Features - Bioreactor Reactorcheck Capacity100 Ltr. (128 Ltr.) Vessel sizesø 400 x 1080 mm Dished bottomcheck Dished top sidecheck Top connectionscheck OutletDN40 (with valve) With jacket(23 Ltr.) Max. temperature0/170 °C With propellor stirrercheck Motor(0,18 kW 3x 230/400V 1360 rpm) Speed mixing shaft270 rpm With jacketcheck Bioreactors MaterialStainless steel 1.4435 (316L) General No.1736 Year of construction2019 Floorspace0,75 x 0,75 m Total height1,5 m Weight250 kg Extra SpecificationsElectrochemical polishing, surface roughness&:nbsp:Ra ≤ 0.4 µmEquipped with&:nbsp:CIP (Clean-in-Place)&:nb ...

Sandblasting system, blasting system, sandblasting cabinet, sandblasting device -Manufacturer: Joisten & Kettenbaum, Sandblasting system, Sandblasting cabinet -Type: 1200 -Operation: with foot pedal -Dimensions: 1400/1060/H2000 mm -Weight: 542 kg

General SKU440W1451 MakeChrist LocationBarneveld CEcheck TypeEpsilon 2-12D Main Features MaterialStainless steel Surface0.95 m2 Specified Features - Freeze dryer Freeze dryercheck Cooling surface0,95 m2 Number of plates6 Plate sizes350x450 mm Between the plates85 mm With condensercheck Condenser capacity2x 11,8 l. With cooling compressorcheck Make2x Bitzer TypeS4T-52Y-40P No.1669205890 Year of construction2005 Capacity2x 19,7 m3 Cooling mediumIsceon 89 Motor380-420 volt, 1450 rpm MaterialStainless steel General No.12303 Year of construction2006 Mounted on framecheck With switchcheck Floorspace1,55x1,40 m Total height1,90 m8 Weight850 kg Extra SpecificationsWith vacuum pump, control, computersFine chemicalsBiotechnologyFreeze dryersFeed additivesCosmeticsFood additivesSolid pharmaceuticsBiopharmaceuticalAPIGeneric medicinesPowdered foodsChristIndustries  ...

General SKU200W694 MakeInotec LocationBarneveld CEcheck Main Features MaterialStainless steel Volume12000 Ltr. Motor2.2 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity14.400 l, (netto 12.000 l) Vessel sizesDia. 2300x3600 mm Dished bottomcheck Dished top sidecheck ManholeDn500 Top connectionscheck OutletDN150 Max. temperature55°C With propellor stirrercheck Motor2,2 kW, 230/400 volt, 1465 rpm Speed mixing shaft20-120 rpm MaterialStainless steel 1.4404 (316L) General No.IN289/17045 Year of construction2017 Floorspace2,82 x 2,82 m Total height4,7 m Weight1800 kg Extra SpecificationsHanging vessel&:nbsp:&:nbsp:&:nbsp:&:nbsp:Fine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleo ...

Professional Glycerin Boiling Kettle / Double Jacket Kettle 120 Liters M&M Digital Indu 50+S – Stainless Steel 1.4301 For sale is a used, fully functional glycerine boiling kettle (Kocioł glicerynowy) of the brand M&M from Poland. Technical data according to the nameplate: • Model: KOCIÓŁ GLICERYNOWY 120 l Digital Indu 50+S • Order number: 120IO/Digital I50+S/237 • Year of construction: 02/2019 • Net capacity: 120 litres • Material: Stainless steel 1.4301 (complete) • Power: 2 × 6 kW • Connection: 400 V • Weight: approx. 110 kg • CE marking available Condition: • Used, but fully functional • Easily soiled • Easy to clean • Ready to use Features & Benefits: • Double-jacket design with glycerine filling as heat transfer medium • Uniform heating over the entire surface – no burning of the product • Digital Temperature Cont ...

Linear drive, toothed belt axis, stroke1500, EGC-120-1500-TB-KF-0H-GV, 556815, Festo, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition with traces of storage! The part was bought from a spare parts warehouse of a company, was there for some time in stock but never in operation and has little storage traces Festo linear drive, toothed belt axis, linear module, EGC-120-1500-TB-KF-0H-GV, 556815, Overall dimensions: 2050x120x120mm, approx. 60kg, carriage 300x70mm, stroke 1500mm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for  ...

Linear actuator + planetary gearbox, stroke 1500, EGC-120-1500-TB-KF-0H-GV, 556815 +.., Festo, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition with traces of storage! The part was bought from a spare parts warehouse of a company, was there for some time in stock but never in operation and has little storage traces Delivery consists of: 1) Festo toothed belt axis, liner drive, linear slide EGC-120-1500-TB-KF-0H-GV, 556815, Overall dimensions: 2050x290x120mm, 70kg, slide 300x70mm, stroke 1500mm, A blue cap at the front and a black round cover at the rear will be supplied later 2) Neugart planetary gearbox, PLE080-005-SSSB3AE-E19/40/95/115/B5/M8, 42631, Festo number 552195, transmission ratio 5:1, 6 months warranty We give you 6 months warranty for these goods from the date of invoi ...

HAKO Citymaster 1250 Municipal equipment carrier with winter maintenance equipment - KIF Keil Vario snow plough with 145cm clearing width - KIF box spreader - Tipper platform This Hako Citymaster 1250 was first commissioned in 2015, has only about 444 total operating hours according to the meter and is in good general condition with the usual signs of use and wear, fresh from the small customer service, immediately ready for use. The sale is made as a used machine under exclusion of return, guarantee and warranty. - Net price 27.900,-€ // Gross price 33.201,-€ - Inspection / test drive possible - Shipping can be organized nationwide, the costs depend on the distance! - We would be happy to have an attractive leasing / financing offer prepared for you by our leasing partner!

Adjusting nut for die-casting machine IDRA3300, TR330x10, 121311, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Adjustable nut, Tr330x10, D500x375mm high. 340kg Incl. bronze inlet ring Adjusting nut for die casting machine IDRA 3300 The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

with Fanuc 0i TF Plus Capacity : Max. Swing Slide 1350 mm Max.Turning Dia x Height 1250 x 150 mm Standard turning Dia x Height 800 x 835 mm Max. Job weight including Fixture / Chuck 2000 kg 1.2 Table Spindle Drive with Gear Box: Spindle Tapper Straight locating Dia 160 mm Front bearing diameter Dia 500 mm, Dia 300 mm Spindle speed range 10 - 250 rpm Spindle power, S1 / S3 22 / 30 kW Spindle Torque S1 / S3 2495 / 3400 Nm Spindle range for spindle constant power 84 - 250 rpm 1.3 Axes Drive : Traverse X/Z 675 / 850 mm Rapid Traverse rate 16 m/min 1.4 Turret (Hydraulic) : Turret number of station 12 Nos. Tool Shank 32 mm Boring Tool Holder Dia 60 mm IFTD with boring bars in adjacent pocket 260 mm IFTD with boring bars at 60deg pocket No Tool in adjacent pockets 560 mm 1.5 General Details : Coolant tank capacity 300 ltr Hydraulic power pack  ...

General SKU335X749 MakeMöstl Anlagenbau GmbH LocationBarneveld CEcheck Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume128 Ltr. Motor0.18 KW Specified Features - Bioreactor Reactorcheck Capacity128 l. Vessel sizesDia. 400x1080 mm Dished bottomcheck Dished top sidecheck ManholeDN400 Top connectionscheck OutletDN40 (with valve) With jacket( 23l.) Max. temperature0/170°C With propellor stirrercheck Motor(0,18 kW, 230/400V, 1360 rpm) Speed mixing shaft270 rpm With jacketcheck Bioreactors MaterialStainless steel 1.4435(316L) General No.1739 Year of construction2018 Floorspace0,75x0,75 m Total height1,5 m Weight250 kg Extra SpecificationsElectrochemical polishing, surface roughness&:nbsp:Ra ≤ 0.4 µmEquipped with&:nbsp:CIP (Clean-in-Place)&:nbsp:sys ...

General SKU335X747 MakeMöstl Anlagenbau GmbH LocationBarneveld CEcheck Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume128 Ltr. Motor0.18 KW Specified Features - Bioreactor Reactorcheck Capacity128 l. Vessel sizesDia. 400x1080 mm Dished bottomcheck Dished top sidecheck ManholeDN400 Top connectionscheck OutletDN40 (with valve) With jacket( 23l.) Max. temperature0/170°C With propellor stirrercheck Motor(0,18 kW, 230/400V, 1360 rpm) Speed mixing shaft270 rpm With jacketcheck Bioreactors MaterialStainless steel 1.4435 (316L) General No.1737 Year of construction2019 Floorspace0,75x0,75 m Total height1,5 m Weight255 kg Extra SpecificationsElectrochemical polishing, surface roughness&:nbsp:Ra ≤ 0.4 µmEquipped with&:nbsp:CIP (Clean-in-Place)&:nbsp:sy ...

Inlet size: 1.370 x 990 mm - Rotor W x Dia.: 1.250 x 1.300 mm - With 200 kW Electrical motor

Inlet size: 1.200 x 900 mm - With electrical motor, Inlet and many spare-parts

Size: 1.300 (1.250) x 650 mm - MA220 (380V. / 16A. / 0,6 kW) Magnetic vibrator - With steel wear plates - Included Thyristor controller

Working width: 6000mm, max. sheet thickness: 1.25mm, control panel: Siemens SIMATIC HMI, including electric rotary shear, an on-site inspection is possible.

OVERHAULED - Size: 1.600 x 1.200 mm - 2 Pcs. SE 1,5 / 4 (0,8 kW / 1.400 RPM) (220 / 380V. - 3,7 / 2,15A) Unbalance Motors - Rubber protection

UNUSED - Size: 1.250 x 900 mm (Stainless steel) - Magnetic Vibrator: MV E (3 kW / 1.500 U/min) - With Tyristor controller

Magnet L x W X H: (1.200 + 1.200=) 2.400 x 1.200 x 400mm. (130mm. Transportmagnet) . Belt: 1.400mm. - AA.: Ca. 3.050mm. - Weight: 4.850KG

Hydraulic injection moulding machine manufactured in 2013. This SUMITOMO SHI DEMAG Systec 120/470-430 features a clamping force of 120 t and a screw diameter of 40 mm. It offers a maximum metering volume of 231 cm³ and a distance between tie bars of 470 x 470 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 120/470-430 machine we have for sale. Contact us for further details.

Technical Data: Working width: 1200 mm Materials: BOPP, OPP, CPP, PET, OPA Parent roll diameter: 800 mm Final roll diameter: 600 mm Maximum speed: 300 m/min Web guiding system: Yes Knife type: Razor & rotary blades Trim exhauster: Included

General SKU409X1232 MakeBeltron LocationBarneveld CEcheck TypeUV-Trockner BE 20 / 120 W / II Dimensions Belt width220 mm Belt length1050 mm General No.0130128 Year of construction2018 Mounted on mild steel frameand wheels With switchcheck Floorspace1,10x1,10 m Total height1,37 m Weight150 kg Extra SpecificationsType:&:nbsp:UV continuous conveyor dryerLamp type:&:nbsp:2 × medium-pressure mercury lampsLamp power:&:nbsp:Max. 120 W/cmConveyor speed:&:nbsp:0.5 – 12 m/min (variable) (motor: 5 kW)Adjustable lamp height:&:nbsp:20 – 150 mmCooling:&:nbsp:Forced-air, central exhaust fanOperating temperature:&:nbsp:19 – 23 °CExhaust connection:&:nbsp:To outdoor vent, max. 7 m ductAdditional information:Siemens touchscreen control, type&:nbsp:Simatic HMIExhaust fan:&:nbsp:0.14 kW,&:nbsp:2550 rpm, airflow&:nbsp:10.1 m³/minStarchAgrochemicalsSpicesPlastic & polymersCatalysts  ...

Agfa ST 125SX Plate Stacker

Inv. Num. : 8807 Type: PROVITE 2000/120 Producer: Plastmashines Germany Created: 2011 Parameters: Capacity: 400 kg/h Line mounting: Main control panel and monitoring system Mixing/homogenizing tanks Engines Extruder Vacuum pump for degassing Melt filter Closed Water Cooling and Pellet Drying System Unloading silo BOCO PARDUBICE Machines Corner Conveyor Belt Mercedes

Engine Brand: MTU, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 600 Kw, Rated Speed: 1800 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/mtu-12v2000-r80-new/150, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Empty weight: 2.468 kg, Type number: 12V2000-R80

Engine Brand: MTU, Condition: CORE, Nominal Power @ Nominal Rpm: 218 Kw, Nominal Rpm @ Nominal Power: 1500 Rpm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: No Flywheel , Turbo Type: None Mounted , Exhaust System: Not Mounted , ECU Present?: no , Starter Voltage: No Starter Present , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/mtu-12v183-aa51-218-core/4 22, , = More information =, , Type: Engine, Empty weight: 895 kg, Type number: 12V183-AA51-218

Engine Brand: MTU, Conditie: NEW, Engine Cooling Type: Exchanger (on engine) , Engine Color: Grey , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 2040 Kw, Rated Speed: 2100 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/mtu-12v4000-m90-new/431, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 12V4000 M90; Transport weight [kg]: 5890

Engine Brand: MTU, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Core , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: No Starter Present , Rated Power: 680 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/mtu-12v2000-used/183, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 12V2000; Transport weight [kg]: 2450

Engine Brand: MTU, Condition: RECONDITIONED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 1 , Flywheel SAE: No Flywheel , Engine Condition: Core , Turbo Type: None Mounted , Exhaust System: Not Mounted , ECU Present?: no , Starter Voltage: No Starter Present , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/mtu-12v1600-reconditioned- longblock/238, , = More information =, , Type: Engine, Year of construction: 1010, Type number: 12V1600; Transport weight [kg]: 1420

Engine Brand: MTU, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Core , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/mtu-12v1600-used/797, , = More information =, , Type: Engine, Year of construction: 1010, Type number: 12V1600; Transport weight [kg]: 1740

Engine Brand: DETROIT DIESEL, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 835 Kw, Rated Speed: 1800 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/detroit-diesel-12v2000-use d/566, , = More information =, , Type: Engine, Year of construction: 1010, Type number: 12V2000; Transport weight [kg]: 2200

Key data: 4300 mm, 1925 mm

Connected load 380V 7A Cutting length 4300 mm Cutting height 1925 mm Frame height 2210 mm Machine height 2500 mm Room height 2540 mm Edging height 1870 mm Passage height 1940 mm

Pos. 5 – 1 1000 MT Press Mfc.: Yejing Force: 1000 T Type: LH Press Built: 2016 Billet: dia. 127 x 580 mm Auxiliary Built: 2020 Mfc.: Jiangshun Water Tank + Air Cooling Cooling bed: 38 m x 7.5 m Pos. 5 – 2 1000 MT Press Mfc.: Yejing Force: 1000 T Type: RH Press Built: 2016 Billet: dia. 127 x 580 mm Auxiliary Built: 2020 Mfc.: Jiangshun Water Tank + Air Cooling Cooling bed: 38 m x 7.5 m Pos. 5 – 3 1000 MT Press Mfc.: Yejing Force: 1000 T Type: LH Press Built: 2016 Billet: dia. 127 x 580 mm Auxiliary Built: 2020 Mfc.: Jiangshun Water Tank + Air Cooling Cooling bed: 38 m x 7.5 m Pos. 5 – 4 1000 MT Press Mfc.: Yejing Force: 1000 T Type: RH Press Built: 2016 Billet: dia. 127 x 580 mm Auxiliary Built: 2020 Mfc.: Jiangshun Water Tank + Air Cooling Cooling bed: 38 m x 7.5 m Pos. 1 – 4 1000 MT Press Mfc.: Yejing Force: 1000 T Type: RH Press Built: ...