sk 12 used for sale

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: HAWE, hydraulic unit on chassis with 4 hydraulic jacks -Motor: 0.75 kW -Pressure: up to 350 bar -Flow rate: 2,5 l/min -Individual components: see photos -Dimensions: 1040/460/H880 mm -Weight: 180 kg

Plummer Block Housings, Plummer Block Housings, Bearing Block Plummer Block Housing, Plummer Block Housing Unit, Plummer Block Housing Units, SKF Plummer Block Housing, Plummer Block Unit -Manufacturer: SKF, plummer block housing type SN 212 -Bore diameter: 72 mm -Quantity: 1x bearing housing available -Dimensions: 255/105/H135 mm -Weight: 4.2 kg

Plummer Block Housings, Plummer Block Housings, Bearing Block Plummer Block Housing, Plummer Block Housing Unit, Plummer Block Housing Units, SKF Plummer Block Housing, Plummer Block Unit -Manufacturer: SKF, plummer block housing type SNH 513-611 -Bore diameter: 77 mm -Quantity: 1x bearing housing available -Dimensions: 275/110/H150 mm -Weight: 6.6 kg

Boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, universal drilling head, boring tool, facing head -Manufacturer: Schmid, plan and boring head -Type: S.AdK 6 -Recording: SK50 -Adjustment accuracy: 0.01 mm -Dimensions: 175/150/H305 mm -Weight: 24 kg

Dough rolling and shaping machine, combination rolling machine, rolling machine -Roll width: approx. 600 mm -Rolling thickness: from 0.3 - 30 mm -with round and long wire type: SR0 -flour container -16 A-CEE plug -Connection: 380 V, 0.75 kW -The rolling machine is mobile -Dimensions: 1900/1250/H1900 mm -Weight: 430 kg

Sheeting machine Seewer Rondo SKO 63 for all doughs for rolling out and touring Extendable table left Dough sheeter mobile Connection 400V, 16A-CEE plug Used machine

Sheeter Seewer Rondo SKO 611 for all doughs for rolling out and touring with program control Extendable table left Connection 400V, 16A-CEE plug Used machine

It is a BIESSE Rover A1232 5-axis horizontal milling machine and a BIESSE Skill 15.36 G FT 3-axis horizontal milling machine.

Overview  This complete isobaric filling line was produced in 2014 by the Italian manufacturer Eurostar and is located in Mexico. The line consists of a triblock (rinser, filler and capper), self-adhesive labeler and conveyor belts. It is being sold because a new line with a higher capacity has been purchased. It has already been dismantled. Technical Details  Capacity: Max 6,000 b/h Formats: 0.210L, 0.355L, 0.500L glass bottles 26mm metal crown caps Dimensions: Width: 5,300 mm Depth: 2,630 mm Height: 2,860 mm Weight: 8,000 kg POWER SUPPLY: Main: 460V – 60Hz – 3F+N+T Auxiliary: 24V DC Machine main motor: 4 kW Installed power: 9 kW Scope of Delivery  Triblock (rinser, filler, and capper) Selfadhesive Labeller with 2 stations Conveyors

MBO K 800.2 SKTL/6 AUT year 2007 pallet feeder 6 buckles 2 knives 1 side buckle Navigator control Compressor Palamides Delta 703 year 2006 good condition in production available immediately

General SKU392U1284 LocationBarneveld MakeSKAN Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4401 (316) Filtercheck Filter surface± 0,03 m² Information TypeAFS 002 Year of construction1992 Floor space1,1x0,95 m Total height1,8 m Weight230 kg Extra Specificationsdata vessel: brand: De jong gorredijk B.V. vollume: 100 Ltr. material: 1.4401 pressure: 4bar max temp.: 50°C year: 1992. flow meters: Brand: Endress+hauser type: promag 53 pump: brand: socsil-inter sa Type: A1 24000 nr: 10156 year: 1994 motor: 0,75kW, 220/380Volt 583rpm Miscellaneous filtersSolventsBiotechnologyFine chemicalsSKANFilters > Miscellaneous filtersIndustries > Chemical > SolventsIndustries > Chemical > BiotechnologyIndustries > Chemical > Fine chemicalsBrand > SKAN What you can expect from Foeth: -- Machine is in working condition -- At a r ...

Skov & Weidemann A/S oven, type: E400, number: 3002, 380 V, 3 Ph, 50 Hz, 100 A, 61 kW, 9 integrated floors, dimensions each floor: 930 mm x 920 mm, total dimensions: 1550 mm x 1200 mm x 2900 mm.

Skov & Weidemann A/S oven, type: E400, number: 3036, 380 V, 3 Ph, 50 Hz, 100 A, 61 kW, 9 integrated floors, dimensions each floor: 930 mm x 920 mm, total dimensions: 1550 mm x 1200 mm x 2900 mm.

Key data: 2020 mm, 1600 mm, 350000 mm

Stock number: 4023 LATHE Manufacturer: SKODA, Type: SUT 200 TD x 35000 Machines NO.: ob22780, Year of manufacture: 1984 Specifications: Turning length 35000 mm Turning over transverse slides 1600 mm Ø Gr. turning diameter 2020 mm Max. weight in quill 63000 Kg Spindle Motors Power 2 x 82 kW Total power 2x150 kw kW Accessories: Querschlitte 2 x ( Double ) Universal chuck 2 x 2000 mm mm Ø Rotating bezel 6 Fixed bezel 5 + 2 mm Ø Tailstock 2 x Machine needs be to rebuild - with new control Length: 45,200 mm, Height: 3000, Width: 3500 mm, Weight: 150,000 kg

General SKU409X1229 MakeNetzsch LocationBarneveld CEcheck TypeStativrührer Main Features MaterialStainless steel Volume43 Ltr. Motor1.1 KW Specified Features - Stirring vessel MaterialStainless steel 1.4306 (304L) Open stirring vesselcheck Capacity43 Ltr. Vessel sizesø 300 x 600 mm Conical bottomcheck Flat top sidecheck With covercheck Outletø 30 mm With turbo stirrercheck With dissolver stirrercheck Motor1,1 kW (Ex) Speed mixing shaft1000 rpm Information No.2800170-11 Year of construction2016 Mounted on legscheck Floorspace1,1 x 1 m Total height2,3 m Weight400 kg ATEX compatiblecheck Extra SpecificationsWe have the bottom disk for this one in the box of the Netzsch rs 2/PM is informed, guess spacer is a problem to install : easy / BRFStirring vesselsNetzschStirring vessels > Stirring vesselsBrand > Netzsch What you can expect from Foeth: -- Machine is ...

General SKU254S217 MakeHS Apparatetechnik GmbH (D) TypeRührbehälter LocationBarneveld CEcheck Pressure Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume330 Ltr. Motor1.5 KW Specified Features - Stirring vessel MaterialStainless steel 1.4306 (304L) Closed stirring vesselcheck Capacity330 l. Vessel sizesø 590 x 1050 mm Dished bottomcheck Dished top sidecheck With covercheck Top connectionsDN150, ø 25 mm, 2x ø 15 mm Outletø 50mm With jacketcheck 99 l. Max. temperature200 °C With anchor stirrercheck with scrapers Motor1,5 kW 220—242/380—420 V Speed mixing shaft50 rpm Information No.132/11258/1 Year of construction2011 Mounted on legsSkid With switchgearcheck (as is) Floorspace2,5x2,0 m Total height3,8 m Weight1500 kg Extra SpecificationsIncluding API Heat Transfer plate heat exchanger, type Sigma 25  ...

Verbruggen Satay Skewering Machine – 2021 – As New Condition, For sale: Verbruggen Satay Skewering Machine (Traditional Satay Unit), manufactured in 2021 and presented in as new condition. A high-quality machine designed for the automatic skewering of meat, fish, tofu, vegetables, or fruit onto sticks, ideal for food producers looking to increase efficiency while maintaining an artisanal product appearance., This versatile standalone unit is easy to adapt to different products thanks to its quick-change forming plates and adjustable stick lengths. Built for reliability, simple operation, and easy cleaning., Key Features:, - Year of manufacture: 2021, - Condition: As new, - Suitable for meat, poultry, fish, tofu, vegetables, fruit, - Fast changeover between products, - Adjustable for various stick lengths, - Consistent, high-quality production output, - Hygienic and easy to clean, - R ...

turning diameter over bed: 1790 mm turning diameter over slide rest: 1250 mm turning length: 5000 mm faceplate: 1250 mm workpiece weight: 4500 kg control: Siemens type: System 8 T mm turning speeds: 1,1-300 U/min steady: mm steady: mm total power requirement: 72 kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team T ...

spindle diameter:180 mm x-travel:6.000 mm y-travel:2.900 mm total power requirement:95 kW weight of the machine ca.:130 mit Zubehör t z-travel:1.250 Ram mm w-axis:1000 Spindel mm ram stroke:1250 mm dimension of the ram:450 x 450 mm bore spindle stroke:1000 mm bore spindle turning speed range:920 1/min powered rotary table: IOS 40 CNC 2 Achsen B u.V Rotary-table:3000 x 3500 mm Rotary-table: CNC-IOS 40 NC mm stepless adjustable, relative to diameter:Index 4x 90° -360000 Winkel =0,001 Grad mm travel - cross:Längs 1230 mm table load of rotary table max.:40 Tonnen clamping plate:3 x 8000 x 2000 mm CNC Ram-Type Floor Boring and Milling machine, dismantled and stored The headstock sliding guides were recoated and scraped.

pressure:160 t distance between columns:1340 mm stroke:300 mm Distance table/ram, max. stroke up, adjustment up:620 mm table surface area:1300 x 900 mm table height over floor:930 mm side window:600 mm ram surface:1300 x 900 mm speed down:367 mm/s speed up:390 mm/s working speed:58 mm/s power requirement:30,0 kW weight:15,0 t Dimensions (WxDxH):2,5 x 2,2 x 4,0 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 foundation pit:not necessary

nominal force:2500 t stroke:600 mm cycle time:13 - 18 s distance between columns:1720 mm Distance table/ram, max. stroke up, adjustment up:2600 mm table surface area:1720 x 1800 mm allowed max. force:4000 t blow die to die:5000 t ram surface:2100 x 1320 mm capacity of ejector in table:40 t ejector stroke in table:250 mm ejector surface area in table:900 x 820 mm capacity of ejector in ram:6 t ejector stroke in ram:40 mm spindle diameter:425 mm power requirement:900,0 kW weight:335,0 t Dimensions (WxDxH):3,4 x 4,6 x 9,7 m height over floor:8,3 m fully-automated forging line:to produce axle shaft

pressure:160 t distance between columns:1360 mm stroke:300 mm Distance table/ram, max. stroke up, adjustment up:620 mm table surface area:1300 x 900 mm table height over floor:950 mm side window:640 mm ram surface:1300 x 900 mm power requirement:45,0 kW weight:16,0 t Dimensions (WxDxH):2,5 x 2,1 x 4,1 m cutting impact cushioning:hydraulic

General SKU357X1335 MakeNetzsch-Condux TypeCGS 16/V-DA DSF / CFS 8/HD S No.7043 Year of construction1998 Main Features Motor3.7 KW Inlet diameter180 mm Specified Features - Jet Mill Motor1,5 kW (380 volt, 12.000 rpm) With variable speed drivecheck Information Mounted on framecheck LocationBarneveld With switchgearcheck (as is) Floor space4 x 1,4 m Total height4,5 m Weight3300 kg CEcheck Extra SpecificationsTechnical specs (CGS 16/V-DA DSF — :opposed jet mill): Throughput: ca. 10 kg/h Classifier wheel outer diameter: 120 mm Dip tube diameter: 45 mm Max classifier speed: 12,000 min⁻¹ Max gas temperature: 60 °C Drive power: 1.5 kW Drive speed range: 3,000–12,000 min⁻¹ Inlet diameter: Dip tube diameter 45 mm Technical specs (CFS 8/HD-S — :fine classifier): Min speed: 600 min⁻¹ Max speed: 12,000 min⁻¹ Max operating temperature (T_max): 60  ...

Overview  This semi-automatic 20 hL brewing system was manufactured in 2018 and is equipped with a steam-powered heating system. It includes a complete brewhouse, a steam generator, a CIP station, fermentation tanks and a KEG cleaning system. Technical details  Wort yield: 20 hL per brew Control: Semi-automatic Heating: Steam Scope of delivery  Steam generator | Certuss | Junior TC-300 | 2018 Capacity: 300 kg/h Including water treatment plant Brewhouse | SKRLJ DOO | BH-3 | 2018 Mash & lauter tun Kettle Whirlpool Hot water tank | 4.586 L | steam heated jacket Cold water tank | 4.400 L | glycol cooled jacket 2 stage heat exchanger Grist bin 500kg Semi-automatic CIP station | SKRLJ DOO | CIP 2x500L | 2018 500 Litre Acid tank 500 Litre Caustic tank insulated, electric heating 1x sanitary centrifugal pump PLC for pump/temperature control Full stainless steel construction Keg washer | SIFA  ...

Manufacturer: IONTO Model: SKIN ABRASION COMFORT Type of Machine : microdermabrasion device Technical Specifications - Power Supply: 230 V / 50-60 Hz - Dimensions (W x H x D): 34.5 x 23.5 x 30.5 cm - Weight: approx. 10 kg Included - IONTO-SKIN ABRASION Comfort main unit - IONTO-SKIN ABRASION Premium handpiece - 2 x Standard glass tips - 1 kg Micro crystal sand - 1 kg Macro crystal sand - Protective goggles Find more here - / Contact us at -

Used SMI SK 602F shrink wrapper 40.000 BPHTechnical Specifications & Performance DataThis SMI Shrink Wrapper model SK602 F is a robust automatic bundling solution designed for high-speed industrial packaging in beverage production and food applications. As a second hand machine from a leading manufacturer, it offers dependable performance for used bottling line upgrades and capacity expansions. Built in 2004 and CE marked, it accommodates PET, glass, and aluminum can containers, delivering stable operation at high throughput.Manufacturer: SMIModel: SK602 FYear of manufacture: 2004Maximum speed: up to 40,000 units/hour (format dependent)Current working format: 1,000 ml (1.0L)Machine pitch: 545 mmMaximum container height: 340 mmPackaging type: Film only (no tray)Number of lanes: 6Max film reel diameter: 500 mmNumber of reels: 2Operator side: RightWorking table height: 1,250 mmElectrical su ...

Used ELOPAK sks-s60S shikoku monoblockTechnical Specifications & Performance DataThis aseptic carton filling monoblock is engineered for high hygiene beverage packaging within a used bottling line or second hand industrial packaging environment. Manufactured by Shikoku Kakoki, it is built for reliability and precise dosing in beverage production applications where asepsis and product integrity are critical.Manufacturer: Elopak Shikoku KakokiModel: SKS-S60SYear: 2007Operating hours: 3339Operating mode: AsepticSupported formats: Compatible with 0.5L, 0.75L, 1.0L carton packagesContainer type: Designed for Carton handlingMachine weight: 6000 kgElectrical: 400 V, 50 Hz, 3-phaseCompressed air: Min. 550 kPa, Max. 930 kPa, Consumption approx. 2,460 NL/minAdvanced Automation & Control SystemsThe monoblock integrates precise filling control for aseptic operations, ensuring accurate volumes across ...

Used ELOPAK sks-s60S shikoku filling lineTechnical Specifications & Performance DataThis aseptic gable-top carton filling machine is engineered for high-integrity beverage packaging, delivering reliable performance for long-life products. Manufactured by Shikoku Kakoki in 2007, it operates with low accumulated hours and supports multiple carton formats for flexible production planning in industrial packaging and beverage production environments.Manufacturer: Elopak Shikoku KakokiModel: SKS-S60SYear of manufacture: 2007Operating hours: 3339Filling mode: AsepticContainer type: Gable-top cartonsCompatible formats: 0.5L, 0.75L, 1.0LElectrical supply: 400 V, 50 Hz, 3-phaseCurrent draw: 114 ACompressed air pressure: 550–990 kPaAir consumption: 2460 NL/minAdvanced Automation & Control SystemsDesigned for aseptic operation, this machine supports precision filling in a controlled sterile env ...

Used Rinsing Machine Kompass SK481 8000 bph Used Rinsing Machine Kompass SK481 8000 bphGeneral Features of the Used Rinsing Machine Kompass SK481 8000 bph The Used Rinsing Machine Kompass SK481 8000 bph rinses bottles with a diameter of 45 mm and delivers a nominal output of 8000 bottles per hour. Kompass manufactured this machine in 2009 to serve medium-speed bottling lines. In particular, the SK 481 model offers a compact, efficient solution for plants that prioritize line compatibility and consistent performance. As a result, it suits both new installations and retrofitting projects.This unit is configured to work specifically with 0.1275-liter PET bottles, making it ideal for producers handling small-format plastic containers. Operation and Mechanical Configuration of this used rinsing machine This rinsing unit rotates counterclockwise, while bottles enter from right to left. Therefo ...

All original spare parts+engines Lombardini from stock ready to ship the following motors available from stock immediately: LDW602/ 1003 / 1204/1204T/ 1404 MIW Ltd. Engine Repair Plant North-West Ring 8 D-2704 zeven-Germany Phone: 0049 (0) 4281-950583 Fax: 0049 (0) 4281-950585 Mail=info@miw-zeven.de

<b>Technical data:</b> Manufacturers; Interroll Condition: Good (Used) Max Payload: 50Kg Belt speed: 1.0 m/s Stroke time: 0.3s Rated voltage: 24V/48V Drive motor and lifting motor Control: Multi Control <b>Tailor-made solutions for your intralogistics</b> We are your competent contact for roller conveyors, belt conveyors, inclined conveyors or telescopic telescopic applications for loading and unloading your goods! We are happy to prepare your individual offer or advise you on the conception or assembly questions. Simply let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, the craft sector and the electronics industry. Togethe ...

article nr.: 1282939-0000 Roller for PT 8 Tetra Pak Pull Tab Applicator

Following Winches For Sale Mkae:SEC Type:EAMW-62-120 & EMW 120

table length: 1200 mm table width: 1200 mm table height: 840 - 890 mm weight of the machine ca.: 0,32 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Marcel Spiedo 1200 Machine Spiedo 1200 produces a high quality product which is kebab. The skewers are perfect in every way, ensuring high quality and handmade appearance. The machine is equipped with two drums to load meat, receiving the tape (200 mm) trolley for example: the additional tools (1750 x 690 x 620 mm) Specification: Brand: Marcel Spiedo Model: 1200 Unit size: 1490 x 1050 x 2600 (mm) Weight: 500 kg Power supply: 400V 50 Hz 3N Total power: 0.5 kW Made of stainless steel

Nut bumper head for attachment to a machine with SK40 tool holder. The tool is suitable for pushing grooves. Manufacturer: ETS Perez 69 VILL.NNE BREVET19015 TYPE127745 How spiral groove works Accessories various groove shock steels M.3, M.4, M.6, M8 T.45, M8 T80, M10 T.80, M10 T80, M12 T.80, M.16 T.82 Special price

Tool holder, milling holder, milling tool -Adjustment: SK50 -Test pin: 50 x 125 mm -Number: 1x recordings available -Price: per piece -Weight: 4.6 kg/piece

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Number: 36x spindle tools -Take: SK40 -with: CNC pull studs -different shaft sizes: 30-125 mm -Price: complete -Weight: 86 kg

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Number: 9x spindle tools -Take: SK40 -different shaft sizes: 85-125 mm -Price: complete -Weight: 17 kg

Tool holder, milling holder, milling tool, test mandrel -Test mandrel: Ø 50 mm -Recording: SK50 -Shaft: R=25,000 / L=120,068 mm -Dimensions total: Ø 98 x 255 mm -Weight: 4.4 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 125 mm -Number of teeth: 6 -Indexable inserts: Carbide -Recording: SK50 -Weight: 10 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Sandvik Coromant, face milling cutter head corner milling cutter 2 pieces -Type: 490-125Q40-14M 725386 -Adapter: SK50x40x40 -Delivery/Price: complete -Dimensions: Ø 125 x245 mm -Weight: 6.8 kg/piece

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Gewefa Sandvik Coromant, face milling cutter head 5 pieces -Type: 1x Ø100 / 2x Ø125 / 2x Ø160 mm different versions, see photos -Adapter: SK50x40x40 -Delivery/Price: complete -Transport dimensions. 280/270/H230mm -Weight: 40 kg

: Plant used separation / separation system Manufacturer: Schauenburg Type: MAB 125 Engine type: 1130-1190 Year of construction: 1992 Power: 125 m ³/h Speed: 1000 rpm KW: 2.7

1. CUTTER HAED WITH KNIVES FOR KRÄMER + GREBE - K+G WETTER SA 120 2. CUTTER HAED NO KNIVES FOR KRÄMER + GREBE - K+G WETTER SA 120 Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Raw steel DN 1000 wall thicknesses from 11.9-15.7 mm PE coated inside coated length: 1-3 m in short pieces 5-18 m long pieces Inside length 18 m coated steel pipes DN 1200 PE-jacketed

Material: Stainless steel V2A Drive: 2,2 KW.

see picture in the appendix

Rotary vane vacuum pump 2 Stage State: Absolutely new indoors and outdoors, General ueberholt and repainted Performance: 12 months Manufacturer: Pfeiffer Type: DUO 120 engine: 400V DS equipment: mineraloel Inclusive: user manual oel mist separator optional delivery time: on request photo is available at night.

Rotary vane vacuum pump 2 Stufig state indoor and outdoor absolute condition, Rebuilt and repainted Warranty: 12 months Manufacturer: Pfeiffer Type: DUO 120 Motor: 400V DS resources: petroleum Includes: User manual oil mist eliminator optional Delivery time: on request photo is adjusted retrospectively.; ready for operation