134,096 used machines on RESALE, but how to find them? Machine Search
width of the strips: 100 mm band length: 915 mm dimensions of grinding wheel: 200 mm work table:: 170x125 / 265x150 mm total power requirement: 0,5 kW weight of the machine ca.: 26 Kg dimensions of the machine ca.: 0,6 x 0,5 x 0,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 1 boring of olive 1=yes, 0=no: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm spindle taper ISO: 40 spindle turning speed range: 80 - 4000 U/min transmission ratio: 18 feed range: 0,1 - 2000 mm/min rapid traverse: x = 4 / y = 3 / z = 5 m/min table load capacity: 250 kp voltage: 380 V / 50 Hz spindle drive: 5,5 kW total power requirement: 16 kVA weight of the machine ca.: 2,6 t dimensions of the machine ca.: 3,8 x 4,3 x 2,0 m • CNC-control system 432 E • Operating hours: 37719 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine is in good technical condition, after prior agreement it is possible to test it. with the Siemens Shopturn system, including the feeder, the machine is fully equipped. BASIC PARAMETERS Working space max. turning Ø: ≈ 410–500 mm max. length: 800 mm distance between spindles: approx. 1020 mm swing diameter above the bed: ~700 mm realistic: ideal for shafts, flanges, bodies up to ~800 mm Travels (axes) X: ~480 mm Y: 100 mm Z: ~800–845 mm B axis: 110 (5-axis machining) C axis: 360 (indexing + interpolation) this makes it a full-fledged turn-mill (not a classic lathe) Spindles main spindle speed: ~5000 rpm power: ~25–34 kW passage: approx. 76–87 mm counter spindle speed: ~6000 rpm milling spindle (main difference compared to a classic lathe) speed: up to 12,000 – 20,000 rpm power: ~19–22 kW taper: HSK-A63 or Capto C6 allows: milling drilling tapping 5-axis simultane ...
plate thickness: 1,6 mm pressure: 450 MPa : 150 x 150 x 90° table surface area: 650 x 500 mm : 875 mm cutting angle - upper blade: 4 ° weight of the machine ca.: 75 kg • manual notching machine with lower frame • sheet thickness (steel 450MPa) to 1.6 mm, aluminium to 2.25 mm, plastic to 3.0 mm, • machine for demonstration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gate Sharper Manufacturer Vollmer for Inclined and straight ground
The machine is in good technical condition, after prior agreement it is possible to test it. Maximum size of the machined part mm 1330 x 900 x 595 Max. weight of the machined part kg 5000 Axis travel X/Y/Z/U/V mm 800 / 600 / 400 / 150 / 150 Diameter of the wire used mm 0.15-03 Continuously controlled 4 axes X, Y, U, V Drive system using AC servo drives Max. cut cone 22.5 / 100 mm Accuracy class of ball screws rpm C1 - highest Filtration system capacity l Main tank 1630l, secondary tank (Z=600) 1280 l Max. cutting speed mm/min 250 Dielectric conductivity measurement Auto – 5 ~ 200 kW-cm Dielectric temperature measurement Auto with accuracy 1C Power input kVA 15 Machine footprint mm 4350 x 3600 Height mm 2740 Machine weight approx. kg 8500 • Windows CE control system (described above) • vertical leveling device • paper filter 2 pcs • deionization resin - 1st fill • deionizati ...
SAHINLER HKM 115 hydraulic ironworker machine was built in Turkey by Şahinler Metal Makina Endüstri A.Ş. It is an extremely versatile machine designed for complex machining of structural steel (S235 / S355). It is capable of performing processes such as precise hole and corner punching, as well as shearing flat bars, angle bars and bars. All these operations are performed at 5 individual workstations. Each station is controlled by two hydraulic cylinders and separate foot switch controllers. The use of this solution enables independent or parallel operation of the machine by two operators at two stations simultaneously. The stroke of each cylinder is adjustable in order to increase productivity. All of this makes the offered HKM 115 ironworker machine the perfect solution for increasing production efficiency in production facilities and locksmith workshops. The total weight of the mac ...
MUBEA PROFI 500 hydraulic ironworker machine was built in Germany by Muhr und Bender Maschinenbau GmbH (Mubea). The machine, designed for complex machining of steel workpieces, is equipped with 4 individual workstations. They are capable of performing such processes as precise hole punching, as well as shearing flat bars, angle bars and bars. Each station is hydraulically controlled. The extremely robust design of the machine additionally ensures maximum process stability during even the most intensive challenges. All of this makes the offered Muhr & Bender PROFI 500 ironworker machine the perfect choice for increasing production efficiency in industrial facilities and locksmith workshops. Technical specifications of the MUBEA PROFI 500 ironworker machine General data - maximum press force: 50 t (500 kN) - number of workstations on the Muhr und Bender PROFI 500 machine: 4 Flat b ...
Belt Strapping Machine Strap Strapping Device Manufacturer Mosca Verpackungstechnik Maschinenfabrik Gerd Mosca GmbH 69429 Waldbrunn Type RO-TR500-4 Year of construction 2001 Current connection 3 AC 400 Volt Current consumption 1.5kW 50Hz 2.5A PLC Siemens Simatic OP7 The machine can work both manually and automatically. The conveyor belt brings the packaged goods to the right place and the machine then strapping. Operating states Machine An automatic Open a frame Cut off tape
PEDDINGHAUS Hydraulic 800 hydraulic punching machine was manufactured in Germany by Paul Ferdinand Peddinghaus GmbH. This highly reliable machine is used for the precision machining of angle bars and flat bars. It enables the punching of square and round holes in structural steel workpieces with a maximum thickness of 25 mm. The machining process is performed with a high press force of up to 80 tonnes by means of punches. The perfectly balanced design of the machine maintains excellent stability even during the most intensive challenges. All of this makes the PEDDINGHAUS Hydraulic 800 an excellent addition to industrial facilities and locksmith workshops. The total weight of the machine is approximately 1500 kg. Technical specifications of the PEDDINGHAUS Hydraulic 800 punching machine General data - maximum press force: 80 t (800 kN) - throat depth: approx. 200 mm - working heigh ...
Code: 0383 Brand: DUE B.ERRE STEMA - ITALY Model: SPINAMATIC GLF HP - CE Standard Machine for applying thick glue and dowels with pneumatic gun for panels, for doors, windows and various - CE Standard Technical data Max insertion capacity 60 dowels per minute Dowel diameter mm 10/12 mm Dowel length mm 25 to 50 mm Max insertion depth 30 mm Machine works with one diameter of dowels at a time Electronic dosing of glue quantity Washing system Flexible arm provided with counterweight that makes the gun lighter during the work cycle (gun weight approx 3 kg) Recommended adhesive type: Water-based emulsion adhesive - Viscosity Brookfield 580 mPa.s - Solids content 30% - Min film formation temperature 3–5 °C - Cleaning with water Wheels on base Voltage 220 V single-phase Max pressure 6 atm Overall dimensions mm 600 x 1000 x 2100 h Weight kg 130
Bore diameter: , mm Number of heads horizontal: , St. Number of heads vertical: , St. SPINAMATIC mod. GLF-HP Dübeleintreibgerät mit Leimangabe für Fensterfertigung ---------------------------------------------------------------- komplett wie folgt : - Fahrbare Ausführung - Dübelzuführung zur Pistole wird durch SPS-Steuerung gesteuert. - 1 Wendelförderer zur Aufnahme von Dübeln mit 1 Zuführung - Leimanlage ist mit Hoch-Druckpumpe 10:1 und Sonderleimspritzdüse für Dickleim (Typ D3 oder D4-Einkomponent) augerüstet - pneumatische Pistole für Dickleim- und Dübeleinsetzen mit Ausrüstungen für nur einen Dübeldurchmesser nach Wahl zwischen : 6 - 8 – 10 oder 12 mm. Dübellänge : min. 25 mm. – max. 60 mm. Tiefeinsetzen = 30 mm. Der Leim wird durch eine Sonderleimspritzdüse, die mit SPS-Steuerung für elektronische Dosierung in Verbindung ist, gespritzt . - Flexibler Arm mit ...
Number of boring spindles: 1 St. Boring depth max.: 150 mm Motor output: 1,8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 25 mm throat: 240 mm bore stroke: 110 mm turning speeds: 125 - 2850 U/min : 310 x 320 mm distance drilling head - clamping area: max. 650 mm total power requirement: 0,75 / 400 kW / Volt weight of the machine ca.: 0,175 t dimensions: 0,95x0,8x1,75 inkl. Tisch m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 150 mm band length: 2000 mm band speed: 33 m/sec total power requirement: 4 kW weight of the machine ca.: 100 t dimensions of the machine ca.: 1,2 x 0,5 x 0,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
connected load frequency: 230 V output: 1,2 KW taper diameter: 19mm mm turning speeds: 1000 - 3000 U/min roll surface width: max. 100 mm roll length: max. 120 mm weight: 2,8 kg range L-W-H: 430 x 280 x 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 16 mm throat: 170 mm bore stroke: 50 mm : 16 mm spindle taper: MK2 spindle turning speed range: 50 - 2250 U/min : 320 mm : 145 mm table surface area: 500 x 140 mm connected load frequency: 230 V total power requirement: 0,5 kW weight of the machine ca.: 90 Kg dimensions of the machine ca.: 0,5 x 0,45 x 0,84 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We ask for self-dismantling. Machinery List: 1 x rack oven with oil burner Heuft type. nonplusultra Bj. 2009 with fireplace 1 x rack oven with oil burner Heuft type. nonplusultra Bj. 2009 with fireplace 1 x rack oven with oil burner Heuft type. nonplusultra Bj. 2009 with fireplace 1 x rack oven with oil burner Heuft type. nonplusultra Bj. 2009 with fireplace 1 x rack oven with oil burner Heuft type. nonplusultra Bj. 2009 with fireplace 1 x rack oven with oil burner Heuft type. nonplusultra Bj. 2009 with fireplace including oil feed pump for all 6 furnaces 1 x basket washing system built in 2009 1 x Apricot and glaze line Dojatec 2009 1 x Proofer for 10 rack trolleys trays 60x 40 Koma BJ. 2009 including chiller 1 x Proofer for 10 rack trolleys trays 60x 40 Koma BJ. 2009 1 x Proofer for 10 rack trolleys trays 60x 40 Koma BJ. 2009 1x large Carrier freezer 50 pallet ...
tire mounting machine -Plate diameter: 475 mm -pneumatic tire press -Folding arm -Weight: 208 kg
sheet width: 1000 mm plate thickness: 5,0 mm distance between columns: 1070 mm diameter of upper rolls: 130 mm total power requirement: 4,0 KW weight of the machine ca.: 1,15 t dimensions of the machine ca.: 2,55 x 0,65 x 1,1 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1000 mm y-travel: 300 mm z-travel: 400 mm table-size: 1320 x 360 mm spindle taper ISO: 40 spindle turning speed range: 58 - 1800 U/min total power requirement: 4 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,1 x 2,1 x 1,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 75 mm band length: 2000 mm band speed: 37 m/sec total power requirement: 3 kW weight of the machine ca.: 0,105 t dimensions of the machine ca.: 1,2 x 0,5 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 25 mm band length: 762 mm dimensions of grinding wheel: 125 mm Table tiltable up to: 45 Grad table surface area: 130 x 130 mm connected load frequency: 230 V total power requirement: 0,3 kW weight of the machine ca.: 9 Kg dimensions of the machine ca.: 650 x 360 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding range: 2 - 20 mm sharp cornered angle min./max.: 90 - 135 Grad connected load: 230 V weight of the machine ca.: 8,6 Kg dimensions of the machine ca.: 0,35 x 0,2 x 0,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Deburring machine, pipe deburrer, bore deburrer, deburring device, brush deburring machine, wire brush -Manufacturer: wrt, deburring machine with base -Drive: 3.0 kW / 2800 rpm -Brush: Ø 250 mm -Shaft: Ø 80 x 110 mm -Dimensions: 660/430/H1200 mm -Weight: 101 kg
: 50 (500) mm : 45 (500) mm L-beam: 80 x 80 x 8 (800) mm T - beam - web outwards: 80 x 9 (800) mm Axis diameter: 60 mm work speed: 5,0 m/min Tool diameter: 195 mm total power requirement: 3 kW weight of the machine ca.: 1,0 t dimensions of the machine ca.: 1,2 x 0,9 x 1,2 m Profile bending machine with: - Foot pedal right / left - Recording: wave 50mm - with digital display - hardened special steel shafts - 1 set of standard rollers - Lower rollers are driven - Upper roll up and down hydraulically deliverable - Horizontal and vertical operation - Engine with braking device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Counting and banding machine ATS US 2000 FSB-DBN-T; State as is; should be installed by ATS Customer Service; suitable for processing banknotes; Rontech MF-360 RAV counting feeder; 1x Banderolier ATS US 2000 AD bandwidth 40mm and frame 260x260mm; 1x Banderolier ATS US 2000 AD Bandwidth 30mmund Frame 260x120mm; Turning unit installed. Count and banding machine ATS US 2000 FSB-DBN-T; condition as is; should be installed by the support of ATS; used for banknotes; count feeder Rontech MF-360 RAV; 1x banding machine ATS US 2000 AD with band width 40mm and frame 260x260mm; 1x banding machine ATS US 2000 AD with band width 30mm and frame 260x120mm; turning station.
width of the strips: 100 mm band length: 1220 mm band speed: 1140 m/min. : 0,62 x 0,4 x 0,35 cm total power requirement: 1,5 kW weight of the machine ca.: 0,04 t dimensions: 0,97 x 0,67 x 0,37 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 3200 mm swing diameter: 3500 mm turning height: 2200 mm Control: Typ 840 D sl total power requirement: 51 kW weight of the machine ca.: 86 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 800 mm y-travel: 500 mm z-travel: mm Control: Heidenhain tool taper: SK 40 : 13,5 kw turning speeds: 3150 U/min total power requirement: kW weight of the machine ca.: 3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 406 mm, 584 mm
Inv. Num. : 9153 Type: DS-30SSY Producer: HAAS Created: 2015 Parameters: Hours: 3002 h Maximum turning length: 584.2 mm Maximum turning diameter: 406.4 mm Maximum turning diameter over bed: 807.7 mm X-axis travel: 317.5 mm Y-axis travel: 50.6 mm Travel Z-axis: 584 mm Maximum main spindle power: 14 kVA Maximum spindle speed: 4800 1/min Number of all tools: 24 pieces Spindle bore: 88.9 mm Weight: 7259 kg Equipment: Chip conveyor Pick-up spindle C-axis Bar Feeder Tool Alignment System System for removing parts after cutting Driven Axial Holder ER32 (Heimatec) Driven radial bracket ER32 (Heimatec) Holders for rotary tools, other holders and jaws
turning diameter: 630 mm turning length: 2000 mm control: Zyklen gesteuert steady: 2 Stk. total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: 700 kN injection volume: 103 cm³ screw diameter: 30 mm platen size: 432 x 310 mm closing stroke: 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: -- kN injection volume: 230 cm³ screw diameter: 40 mm platen size: 475 x 475 mm Condition: used, Specification: Horizontal injection moulding machine, injection unit: - Screw diameter: 40 mm - Cylinder diameter: 40 mm - Spraying volume: 230 cm³. Clamping unit: - tie bar distance: 475 x 475 mm - Operating hours approx.: 30000 h - Air valve - Core pull - 12-way hot runner controller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
RAFAMET KCH 360/450 vertical turret lathe was built in 1987 in Poland by Fabryka Obrabiarek RAFAMET. The machine is used for precise machining of large and heavy workpieces whose size does not allow effective machining with standard machines. RAFAMET KCH 360/450 is distinguished by its stable design, equipped with two vertical supports and one side support. Machining is performed on a work table with a diameter of 3600 mm by means of a reliable vertical spindle. The work table offers 20-position speed adjustment in the range of 0.6 to 50 rpm, enabling precise adjustment of the parameters to the production requirements. The position of the head in all linear axes is continuously monitored by state-of-the-art SONY digital readout, which ensures high precision measurement. All this makes the offered KCH 360/450 vertical turret lathe an excellent choice for, among others, the energy, ship ...
Jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, -Table dimensions: 700 x 405 mm -Travel paths: Z 330 mm/Y 410 mm/X 630 mm -Quick stroke: 155 mm -Recording: MK4 -Speeds: 31 - 1500 rpm -Dimensions: 1570/1800/H2600 mm -Weight: 2600 kg
x-travel: 600 mm y-travel: 400 mm z-travel: 420 mm Control: Heidenhain Tnc table-size: 900 x 460 mm turning speeds: 4000 U/min total power requirement: kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 3 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: 4200 kN injection volume: 572 - 1716 cm³ screw diameter: 90 mm platen size: 1040 x 1040 mm closing stroke: 620 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Manufacturer: Fronius, remote control RCU5000i Univ.SD -Art.No.: 4,046,098 -Voltage: U1 24 V -Dimensions: 180/260/H50 mm -Weight: 1.5 kg
Multifunctional punch, punch press, hole punch, pneumatic hole punch -operated: pneumatically -Year of manufacture: 1995
cross-section width:: -- mm cross-section heigth:: -- mm feed:: -- mm speed of feed:: 0,4 - 20 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cross-section width:: 85 mm cross-section heigth:: 25 - 40 mm feed:: 1 - 999,999,9 mm speed of feed:: 60 m/min cuts max.:: 100 - 120 Schnitte/m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cross-section width:: 5 Schläuche 3-5 mm cross-section heigth:: 3 - 20 mm feed:: 1,5 - 50 mm Condition: used, very good condition only approx. 1 year in production Specification: circular knife cutting machine for slices and rings - small cutting machine with high-speed rotating circular knife - feed and knife movement, pneumatic - Tube or strand diameter min.: 3 mm - Tube or strand diameter min.: 20 mm - Feed (ring or strand length): 1.5 - 50 mm - Output depending on material max.: 60 strokes/min - Optionally, the following can be cut 5 tubes or strands: diameter 3 mm to 5 mm 4 tubes or strands: diameter 5 mm to 7 mm 3 hoses or strands: diameter 7 mm to 12 mm 2 hoses or strands: diameter 12 mm to 15 mm 1 hose or string: diameter 15 mm to 20 mm - Power requirement approx.: 0.37 kW - Air supply min.: ...
max. wheel diameter: 275 mm gear width: 55 mm max. module: 6 min. module: 1,5 control: Sinumerik 840C tooth width: 5,5 mm spiral angle: 0/60 ° max. number of teeth: 120 min. number of teeth: 5 transmission ratio max.: 1:10 transmission ratio min.: 1:1 spindle speeds: max. 110 mm blade head turning speeds: 20-110 1/min total power requirement: 100 kW weight of the machine ca.: 16700 kg dimensions of the machine ca.: 5200x2300x2400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Super clean 1993 Bridgeport EZ trak SX 2 axis mill. Machine is in very nice condition. It has none of the usual battle scars from use and appears to have been used very little. The control boots up as it should and both axis motors work smoothly. SPECIFICATIONS: Capacity 9" x 48" Table Size 9" x 48" Longitudinal Travel 30" Cross Travel 12" Vertical Knee Travel 16" Spindle Speeds (Variable) 60-4200 RPM Spindle Taper R-8 Spindle Quill Travel 5" Positioning Speed (X-Y Axis) 100 IPM Feed Rate (X-Y Axis, Variable) 0.1-100 IPM Spindle Quill Feeds (3) 0.0015" - 0.003" - 0.006" Ram Travel 12" Distance, Table To Spindle Nose 2 1/2" - 18 1/4" Throat Distance 6 3/4" - 18 3/4"
maximum number of results exceeded
please refine your search
