sizing machine used for sale

sheet width: 1500 mm plate thickness: 1,5 mm distance between columns: 1500 mm bending angle max.: 135 ° total power requirement: - kW weight of the machine ca.: 0,36 t dimensions of the machine ca.: 1,7 x 0,7 x 1,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: 50 x 50 x 5 mm round steel bars: 30 mm U-iron on the x-axis: 60 x 40 x 6 mm roll diameter - bore: 40 mm roll diameter -toolpieces: 118 - 148 mm turning speeds: 9,3 U/min voltage: 400 V / 50 Hz total power requirement: 1,5 kW weight of the machine ca.: 0,425 t dimensions of the machine ca.: 1,5 x 0,8 x 0,8 m • Machine has got a standard roller set for profiles: flat upright 50 x 10, flat 50 x 15, upright 30, square tube 50 x 50 x 2,5, retangular tube 50 x 25 x 2,5. further roller sets optionally: for exampel: 1 set (6 rolls) for round pipe D = 3/8 + D = 3/4, Surcharge for each extra roller set: € 440,-/set Machine in unused condition. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling capacity in St 60: 40 mm threading in St 60: M 24 mm threading in GG 20: M 30 bore stroke: 120 mm Short spindle: MK 3 throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514 x 360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle - machine table min./max.: 117 / 701 mm feed: 0,10 + 0,20 mm/U spindle turning speed range: 160 - 2250 UpM total power requirement: 1,45 / 1,9 kW height of the machine: 1840 mm weight of the machine ca.: 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection Pos. 25 Coolant device B, consisting of: separate container (33l), Pu ...

GeneralMulti-Axis Machine; Control: Control F31iB with CELOS CharacteristicsMax machining diameter320 mmMax. Turning Length300 mmSpeed max.6000 rpmSpindle speed 2nd Spindle max.6000 rpmMovements X / Z210/810 mmWeight approx.8000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pGuide bushGuide Bushing If the bar material diameter is smaller than the spindle diameter, place an duracon bushing inside the spindle to prevent vibrations. (including the guide spacer) The customer should machine the guide bushing to the required diameter asLeft Spindle) KITAGAWA 8in. Hollow Chuck B208A521B (SK-OP)(Left Spindle) KITAGAWA 8in. Hollow Chuck B208A521B Three-jaw hydraulic chuck ...

width of the strips: 150 mm band length: 2000 mm band speed: 30 m/min grinding range: 150 x 540 mm voltage: 400 V / 50 Hz total power requirement: 3 kW weight of the machine ca.: 110 Kg dimensions of the machine ca.: 1x0,5x1 m Art.-No.16680 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1,25 mm roll-body distance: 250 mm throat: 260 mm distance between roll centers: 62 mm tool adaptor: 26 mm speed: 6,3 m/min total power requirement: 0,7 kW weight: 170 kg range L-W-H: 1020x600x1500 mm Domestic equipments: - motor driven beading machine - 5 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralCTX beta 1250 4A Two spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - counter spindle slide; Control: CELOS X with Siemens 840D SL Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range0-5000 rpmC-Axis Speed2000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWC-Axis Speed2000 rpmTorque (100% DC)280 NmSlide 1Longitudina ...

Carbide coating machine, carbide coating device -Manufacturer: Carbumatic, hard metal coating machine -Type: unfortunately without a type designation -Voltage: 3 x 220-380 V / 50 Hz -Power: 0.4 kWA -Transport dimensions: 470/470/H380 mm -Weight: 49 kg/piece

NOWO NOWOROLL ball fibre machine was built in 1998 in Finland by NOWO Textile Machinery. It is an extremely advanced system designed for the efficient production of polyester fibre balls made of polyester fibre with a length of 32 mm. The fibre ball is an excellent filling for bedroom cushions, furniture pillows, plush toys and other textile products. It is also an ideal ingredient for creating blends with polyurethane foam. The production process begins with careful weighing and opening of the polyester fibre. The fibre prepared in this way is transported by a fan through a piping system with a humidification system directly to the balling module. Here, the process of twisting the fibre into a ball is performed. The finished polyester fibre balls fall into a chamber from which they are extracted by a bagging machine, which packs the product in polypropylene bags. The NOWOROLL ball fi ...

Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Dimensions (length / width): 4800 x 1600 x 2400 mm weight: 1500 kg Götzinger Power Drill Type BF 297 With the Götzinger PowerDrill you can, depending on the type and design: Griffoliven drill on the loose frame part or for finished wings, with multi-spindle drilling head, quick-change, also for milling of the lock case for WK 2 or intermediate gear Ecklager drill on loose frame part, with Mehrspindelbohrkopf, quick-change, corner-oriented over stop or custom made (tilt window) Drill vertically from above for fitting, pre-drill for clip on loose frame part Milling vertically from above for pushers, profile cylinders, 3-D hinges Horizontal drilling with 2 drilling units, different drilling diameters, Dowel drill front and long side, plywood / fighter, sprouts, Corner connection, front door etc. M ...

plate thickness: 2,5 mm roll-body distance: 260 mm throat: 500 mm distance between roll centers: 92 mm tool adaptor: 35 mm speed: 3,5 m/min total power requirement: 1,5 kW weight of the machine ca.: 295 kg dimensions of the machine ca.: 1200x700x1200 mm Domestic equipments: - motor driven beading machine - 3 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralUniversal Milling Machines; Control: DMG MORI SLIMline® Multi-Touch control Working area 1Longitudinal500 mmCross450 mmVertical400 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightDimensions (L x W x H)3,15 x 2,86 x 2,71 (4,14 x 2,91 x 2,71) mWeight approx.5000 KgSwivel Rotary Table Powered B/C AxesSwivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only!Mode for positioning only5. Axes (swivelling range) -5/+110 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeDistance between T-Slots 63 mmNumber of Slots 7Slot width 14 mmMaximum load (table centre) 200 KgTable surface Ø 630 x 500 mmType of Measuring system Direct measuring systemDirect measuring system ...

Travel X/Y/Z: approx. 1020mm/510mm/500mm, table dimensions X/Y: approx. 1150mm/490mm, max. table load: 900kg, tool holder: SK40, tool positions: 22, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2850mm/2200mm/2750mm, weight: approx. 3900kg, control: Heidenhain TNC 410P. Documentation available. An on-site inspection is possible. Individual sale possible.

GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical850 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 Uni milling head with controlled B axis HSK-A 63Universal milling head with controlled B axis HSK-A 63 Continuously positioning universal milling head (B axis) with integrated motor spindle for 5 axes positioning and simultaneous machiningNC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H11 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning o ...

Drilling machine Brand: Flott Type: 6STW Technical data: Drill chuck holder: B12 Drill chuck stroke: 40mm Distance from column to drilling area: 180mm Thickness of the column: 50mm Worktop: 180x260mm Motor: 0.9 kW Speed: 1250-8000 rpm Weight: approx. 20kg Note: The specifications and descriptions are a copy of the order confirmation at that time. Data are for information and are not binding.

x-travel: 800 mm y-travel: 500 mm z-travel: 460 mm table surface area: 1000 x 500 mm spindle taper: SK 40 control: HEIDENHAIN TNC 150 spindle turning speed range: 31,5 - 3150 U/min feeds longditudinal/cross/vertical: 1 - 3000 mm/min rapid traverse longitudinal and cross: 6 m/min rapid traverse vertical: 4 m/min quill stroke: 110 mm distance spindle nose and table: max. 559 mm table load capacity: max. 500 kg total power requirement: 14 kW weight of the machine ca.: 3,1 t dimensions of machine L x W x H: 2,15 x 1,8 x 2,15 m Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 400 mm

S375G SAMPUTENSILI "CNC" Horizontal Gear Profile Grinding Machine, suitable for the precision grinding of external spur and helical gears and shafts, as well as internal spur and helical gears and splines. The machine has the added capability of grinding worms, rotors, and other screw-type workpieces of similar profile up to 14.76” (375mm) which was factory OEM standard - but delivered at 15.74" (400mm) diameter, and 34.25” (870mm) in length. The machine is also equipped with the optional” on-board CNC” dressing feature, and the on-board CNC” gear inspection system-feature. Serial No. 2376 (New in 2007) This is a first-class, highly versatile gear grinding machine, in superlative” condition throughout, which may be inspected, in running service, at our customer’s plant facility, by appointment. -The machine would require acquisition & adaptation of an appropria ...

AUERBACH AX 5 B CNC bed milling machine was built in 2009 in Germany by Auerbach Maschinenfabrik GmbH. It is an extremely efficient machine designed for even the most demanding production challenges. The AUERBACH AX5 B enables the machining of large, heavy workpieces that are used, e.g. in the aerospace and automotive industry. The machining process is performed fully automatically on the rotary table by means of a 5-axis swivel workhead. This solution enables comprehensive machining of workpieces in a single work cycle, without the need for repositioning them. The workhead is equipped with an electro-spindle rotating at a maximum speed of 12000 rpm. It provides the excellent dynamics required for both roughing and finishing operations. The cutting tools, on the other hand, are continuously cooled to increase their overall service life. The AUERBACH AX 5B CNC machining center is offered  ...

x-travel: 800 mm y-travel: 450 mm z-travel: 400 mm table surface area: 1385 x 305 mm spindle taper: SK 40 quill stroke: 200 mm spindle turning speed range: 50 - 3500 U/min control: HEIDENHAIN control: TNC 155 total power requirement: 5,8 kW weight of the machine ca.: 2,5 t dimensions: 2,25 x 2,0 x 2,4 m Accessories: electron. handwheeel, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stations: 10 / 22 tool taper: SK 40 control: SIEMENS SIMATIC OP 3 total power requirement: ca. 112 kW = transfer machine Shift drum with 10 workpiece stations, 22 machining units (drilling 7 units, drilling and thread cutting 8 units, drilling and sinking 5 units, drilling, sinking and thread- cutting 2 unit), spindle taper SK 40 each, engine power of the individual units between 4.0 and 4.5 kW, SIEMENS control SIMATIC OP 3, assembly robot ABB Accessories.: chucks (without jaws), chip conveyor, coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stations: 10 / 22 tool taper: SK 40 control: SIEMENS SIMATIC OP 3 total power requirement: ca. 130 kW = transfer machine Shift drum with 10 workpiece stations, 22 machining units (drilling 10 units, drilling and thread cutting 5 units, drilling and sinking 3 units, drilling, sinking and thread- cutting 1 unit, thread cutting 3 units), spindle taper SK 40 each, engine power of the individual units between 4.5 and 5.5 kW, SIEMENS control SIMATIC OP 3, assembly robot ABB Accessories.: chucks (without jaws), chip conveyor, coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 450 mm y-travel: 400 mm z-travel: 320 mm tool taper: HSK 63 spindle turning speed range: 0 - 10000 U/min rapid traverse: 30 m/min System for processing fittings, valve housings, etc. consisting of 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 1-0 / 1-V, YOM 2010, with 2 pcs. 3-axis machining modules, each with 8-pos. tool turret, travel paths module 1: X1 / Y1 / Z1 = 450/400/320 mm, travel paths module 2: X2 / Y2 / Z2 = 450/400/320 mm, tool fixture HSK 63, rotary table with 2 integrated workpiece carriers á 400 mmø (B axis per workpiece carrier 360 x 1 °), coolant through spindle Acc.: chip conveyor, coolant device connected by ABB handling robot with 1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 2-0 / 1-V, YOM 2003, with 3 pcs. 3-axis machining modules, each with 8-po ...

Complete powerful planing mill with WACO 6 shaft planing machine, double cut-off band saw Möhringer, complete mechanization, moisture measurement, control, etc. etc. Output approx. 2,500 m3/month and shift. Depending on the dimension Facility consists of: Tilt destacking, single piece allocation, Brookhuis moisture measurement, Braun Canali double band saw, small coil bundling with Böhl small coil formation and feeding to stacking machine, 2 x stacking machines with battening, complete packaging line with film dispenser, package press with lower squared timber insertion. The complete Siemens control system, the entire steel substructure, all cabling, pipes, etc. Very well maintained plant for the production of slats, spring groove, 2 by dimension lumber etc.

saw blade diameter: 70 - 230 mm sawblade width: 12 mm hole of sawblade: 10 - 50 mm grinding wheel diameter: 120 mm grinding wheel width: 6 mm grinding wheel hole diameter: 32 mm no. of teeth: 30 - 400 total power requirement: 0,33 kW weight of the machine ca.: 350 kg dimensions of the machine ca.: 0,80 x 0,70 x 1,70 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 30 mm throat: 320 mm bore stroke: 135 mm thread dia.: M 20 mm spindle turning speed range: 72 - 2600 U/min feeds: 0,1 - 0,2 - 0,3 mm/U spindle taper: MT 3 table surface area: 370 x 360 mm Distance spindle/table max.: 850 mm distance spindle/base plate: 1400 mm voltage: 400 V / 50 Hz total power requirement: 1,0 - 1,5 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,2 x 0,7 x 2,3 m • with cooling device • threading attachment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Professional vacuum machine Webomatic C 50-W is designed for vacuum packaging and hermetic sealing of food products in butcher shops, restaurants, processing plants, supermarkets and professional kitchens. This model is an ideal solution for users who require high working capacity, reliable performance and extended product shelf life in daily professional use. The vacuum system removes air from the packaging, preserving freshness, quality, aroma and product structure. The machine is suitable for packaging meat, cured meat products, cheese, fish, ready meals and many other food items. Model C 50-W is equipped with a powerful Busch vacuum pump with 100 m3/h capacity, ensuring fast and efficient operation even with larger packaging volumes. The chamber size of 700 x 460 mm provides enough space for different product types and package sizes. Sealing bars sized 1 x 450 mm and 1 x 695 mm al ...

grinding wheel diameter: 350 mm no. of working stations: 2 grinding wheel width: max. 125 mm work piece support: jeweils 470 x 260 mm dimensions l/w/h: 1,32 x 0,78 x 1,3 m - work piece support can be swivelled - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2020 mm plate thickness: 1,5 mm distance between columns: 2050 mm Daylight opening: 100 mm total power requirement: 0,75 kW weight of the machine ca.: 1 t dimensions of the machine ca.: 2,7 x 1 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Professional vacuum machine Webomatic C 50-W is designed for vacuum packaging and hermetic sealing of food products in butcher shops, restaurants, processing plants, supermarkets and professional kitchens. This model is an ideal solution for users who require high working capacity, reliable performance and extended product shelf life in daily professional use. The vacuum system removes air from the packaging, preserving freshness, quality, aroma and product structure. The machine is suitable for packaging meat, cured meat products, cheese, fish, ready meals and many other food items. Model C 50-W is equipped with a powerful Busch vacuum pump with 100 m3/h capacity, ensuring fast and efficient operation even with larger packaging volumes. The chamber size of 700 x 460 mm provides enough space for different product types and package sizes. Sealing bars sized 1 x 450 mm and 1 x 695 mm al ...

Mazak Quick Turn Smart 250M L Turning-Milling Center CNC Model Hersteller [manufacturer]: Mazak Germany Type [ type]: Quick Turn Smart 250M L Control unit: Mazatrol smart Incl. handwheel Baujahr[construction year]: 10/2016 Weight [weight]: 6500kg Approx. (L x D x H): 3.4m x 2.0m x 2.0m Full documentation is available. Various accessories after consultation. Top Zustand / condition From first hand, from Germany. Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Price, from stock here plus VAT. Condition: good - ready for demonstration Delivery: from stock - as seen Payment: purely net - upon receipt of invoice Prior sale, errors excepted. We ask for your order. Other machines and systems available from stock – please inquire. We look forward to seeing you.

bore diameter: 550 mm Spindle diameter: 100 mm bore depth: 320 mm turning speeds: 10 70 U/min feed stepless: 0 - 12 mm/min voltage: 380 V / 50 Hz total power requirement: 3 kW weight of the machine ca.: 1.35 t dimensions of the machine ca.: 1,0 x 2,5 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 150 mm y-travel: 300 mm z-travel: 350 mm table surface area: 350 x 200 mm spindle turning speed range: 475 - 20000 U/min total power requirement: 0,4 kW weight of the machine ca.: 0,46 t dimensions of the machine ca.: 1,2 x 1 x 1,4 m • without templates The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 105 mm x-travel: 1200 mm y-travel: 1000 mm z-travel: 325 mm adjustment of cross-rail: 785 mm distance between columns: 1600 mm distance spindle - column min./max.: 215 / 1100 mm spindle feeds - stepless: 1 - 6000 mm/min spindle taper: ISO 40 spindle turning speed - stepless: 40 - 1800 U/min table surface area: 900 x 1500 mm workpiece weight: 2000 kg spindle drive: 5 kW total power requirement: KVA weight of the machine ca.: 6 t dimensions of the machine ca.: 3,3 x 3,0 x 2,8 m dimensions of the machine ca.: 3,3 x 3,0 x 2,9 m • with RENISHAW -detector OMP 40, • mechanical refurbishing and new control HEIDENHAIN TNC 410 in year 2002 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This ingredient handling system is a modernized weighing and dosing unit designed for precise gravimetric processing of bulk materials. The installation has been upgraded to include an advanced weighing function, ensuring accurate batching and efficient material handling. Manufactured by Zeppelin Systems, the system combines robust mechanical construction with reliable pneumatic conveying technology, making it suitable for continuous industrial operation. Key Features Gravimetric weighing system for precise dosing (up to 25 kg per batch) Pneumatic conveying via pressure vessels Two weighing hoppers with integrated discharge systems Compact modular frame design Combination of mechanical, electrical, and pneumatic components Suitable for powders, granulates, and bulk solids Technical Specifications General Data Manufacturer: Zeppelin Systems Year of main installation: 09/ ...

Dowson bread slicer Model: B51C Fully automatic bread slicer, Constructed to handle a variety of loaves, up to 100 loaves per minute, comes with two different cutting heads, overall length 2800mm, 3Ph

Lamination Machine

Bore diameter: , Number of heads horizontal: , Number of heads vertical: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Granulating machine Manufacturer FREWITT Type MG 203 Serial No. 037/933 Capacity up to 1000 kg/h incl. 3x sieve inserts Dimensions of the machine: height approx. 1,000 mm, length approx. 880 mm, width approx. 710 mm, Screen size: 492 mm x 492 mm Net weight: approx. 200 kg The granulating machine is suitable for dry pelletizing, screening, crushing, wet pelletizing, granulating in sausage shape. The granules produced are extremely regular. The grain size is determined by using the appropriate sieves. The machine is driven by a three-phase motor 220/380 volts, 1 hp, via a continuously variable transmission. This adapts the speed of the rotor to the material to be processed. This achieves the maximum possible performance of the machine.

max. wheel diameter: 275 mm gear width: 55 mm max. module: 6 min. module: 1 Control: 840 C Siemens total power requirement: 100 kW weight of the machine ca.: 16,7 t dimensions of the machine ca.: 5,2 x 2,3 x 2,4 m m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 0 nein boring of olive 1=yes, 0=no: 1 ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Highly flexible filling and sealing machine GMP Execution Manufacturer: Zellwag Type Z-201 S-2 Machines No. 1050 Year of construction 12/2017 Commissioning 03/2019 The machine is equipped with : Circular multi-format prism transport system Filling module with 2 rotary lobe pumps and immersion nozzle system 1 set of dosing volume 10-35 ml 1 set of dosing volume 30-155 ml Sorting and feeding system for stoppers Sorting and feeding system for screw caps or pill-proof caps Stopper setting station 2-fold Screwdriving station 2-fold Pill proofing station 2-fold Bottle height 74.2mm – 142.9mm, technical limit 160mm, Bottle diameter 29.0mm – 61.7mm, technical limit 65mm Output up to 50ml - 40-50 pcs/min up to 125ml - 30-35 pcs/min. up to 250ml - 25-30 pcs./min. complete documentation incl. requirement profile/URS; FAT; Qualification plan DQ; Risk ana ...

Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Götzinger Power Drill in special version with dübelleim and press-in station With the Götzinger PowerDrill, you can choose: - Drill the front and long sides - Doweling of doors, seatings, fighters - The drilling patterns are freely programmable - You can: Grip handle and corner bearing, with quick-change Multi-spindle drilling heads - You can: lock casings, pusher and PZ as well as 3D tapes and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, Save and recall POWER DRILL - drilling and milling machine Universal drilling machine for drilling olives, corner bearings, dowel work On the front and the front, milling, lock boxes, tapes, etc. Base in stable design, covered with sheet metal Table top 1800 x 200 mm  ...

Table dimensions: - mm Motor output: 7,5 kW Spindle diameter: 40 mm reus: 6000 U/min Weight: 300 kg Year: 2018 Universal profiler Götzinger UP 1730 Machine for frontal and cross-side machining. Different application technology for wood products First-class surface quality of machined workpieces due to high speed, Particularly stable bearing of the milling shaft and through synchronous milling. Rapid tool change through one-sided mounted cutter shaft and through swiveling clamping device. The whole work process, such as clamping, pneumatic-hydraulic table feed with speed control (stepless) and fast reverse. By exchanging the milling segments and by changing the attachment points can be up to ten different with a single profile milling set Create profile companies. Technical specifications: Cutting depth max .: 30 mm Milling height max .: 150 mm Voltage cross section per stroke max. Softw ...

IDRA OL MG 500 die casting machine Year: 1984 | S/N: 6362 | Used DESCRIPTION: THIS MACHINE IS ON THE PART OUT AND SCRAP LIST This Hot Chamber Die Casting Machine 500 Ton is manufactured by Idra. The control was updated in 2017. Located at our warehouse in Preston, Idaho and is ready for inspection and shipping. We care about the machines we sell and want all of them to enjoy continued productive and profitable service for our remarkable customers. Included specifications are gathered from various sources such as firsthand inspection, owner or operator interviews, manuals, and OEM research. All machinery specifications, condition and details are represented accurately to the best of our knowledge. Confirmation by purchasing entity is recommended and encouraged prior to purchase. Price, location, and specifications are subject to change. SPECIFICATIONS: TONNAGE ...

The machine is in good technical condition, after prior agreement it is possible to test it. Tools A, B, C, D Number of stations in the turret 6 (size D) Number of rotary stations 3 Max. number of tools 60 of which rotary - continuously 360 30 Maximum punch diameter (size D) – single 81 mm Maximum punch diameter in magazine XMTE4M 4 x 31.7 mm Maximum punch diameter in magazine XMTE6M 6 x 24.0 mm Maximum punch diameter in magazine XMTE10M 2 x 24, 8 x 12.7 mm Working range in Y axis (with Multitool) 1300 mm Working range in Y axis (single tool) 1250 mm Working range in X axis (with Multitool) 2550 mm Numerically controlled stroke depth 0.1 – 31 mm Automatic clamp repositioning in X axis up to 10,000 mm Max. positioning speed in Y+X axis 80 m/min. Axis acceleration 10 m/sec Number of strokes – (step 1.0mm) 1000/min USB port 6 Weight 7800 kg Max. jaw opening 11 mm Max. stroke 31 mm Pow ...