sizing machine used for sale

spindle diameter:120 mm x-travel:1250 mm y-travel:1250 mm z-travel:800 mm W-axis (spindle longitudinal):600 mm Speed of boring spindles:1- 2000 U/min. spindle taper ISO:50 table surface area:1000 x 1000 mm total power requirement:55 kW weight of the machine ca.:18 t with CNC HEIDENHAIN TNC 426 autom. toolchnager 40-pockets coolant attachment

x-travel:30000 mm y-travel:3600 mm z-travel:1900 mm milling head speed:1 - 4000 U/min spindle taper ISO:50 feed speeds:1 - 10000 mm/min rapid traverse:25 m/min milling spindle motor:46 kW total power requirement:85 kW dimensions of the machine ca.:45 x 8,7 x 5,5 ü.F. m with CNC HEIDENHAIN iTNC 530 autom. milling head indexing 2,5° floor plate field 31000 x 2500 mm ( 4 floor plates 6000 x 2500 mm + 1 floor plate 7000 x 2500 mm ) 2 chip conveyors, coolant attachment

x-travel:2000 mm y-travel:1500 mm z-travel:1460 mm milling spindle motor:35/30 kW spindle taper ISO:50 spindle turning speed range:24 - 3000 U/min table surface area:1350 x 1550 mm table load:6 t feed speeds:10 - 3000 mm/min rapid speed:10 m/min total power requirement:48 kW weight of the machine ca.:24 t CNC HEIDENHAIN TNC 426 B-axis table round Horiz. and Vertikal automatic positioning Milling Head diverses accessories

x-travel:16300 mm y-travel:2600 mm z-travel:1600 mm spindle taper ISO:50 spindle turning speed range:22 - 4000 U/min rapid traverse:24 / 36 m/min main drive:37 kW total power requirement:50 kW with CNC HEIDENHAIN TNC 430 automatic Universal Milling Head automatic toolchanger 90-pockets coolant attchament and chip conveyor

grinding length:1250 mm grinding width:600 mm workpiece height:730 mm table surface area:1720 x 500 mm headstock: dist. table - spindle center:900 mm max. longitudinal movement:X-1450 feed range:10 - 20.000 mm/min vertical movement:Y-730 mm feed range:0,2 - 3.000 mm/min cross travel:Z-550 mm feed range:5 - 5.000 mm/min power capacity:1500 U/min.- 44 kW / 8000 U/min. - 38 kW kW grinding wheel turining speeds:50-6.000 U/min cutting speed:max. 80 m/sec. weight of the machine ca.:11 t with CNC SIEMENS 840 C auto. dynamic balncing system integrated in the grinding conus profile grinding unit ( on table mounted ) Diamant profile rollers ( dia. max 140 mm , width max. 200 mm, hole 52 H3 ) speed 3000 rpm two magnetic plates ( 1000 x 400 mm, 1200 x 350 mm ) divers Flanges ect.

Article: pickoff with shaft Manufacturer: Schütte pickoff with shaft for Schutte multi spindle automatic lathe SF67 pickoff C26GF pickoff shaft C26GF9S1 gear WG-67S holder B73GF1S1 Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

polygon turning unit for Schutte AG20, used 1 polygon turning unit type Saco SC 15.22.001-Nr.3 1 cardan shaft type Saco SC 15.52.188.00 1 gear box SC 15.22.001-Nr. 3 Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

automatic switch plate 1x saw unit with saw, head and saw valve 40/80 1x turning unit with turning valve 30/60 with flange 9x units 30/60 with valve normal and flanges 5x units 20/50 with valve normal and flanges 1x oil distributor WK9; 1x bar feeder 4 meters; 1x chip conveyor VR500; 1x hydraulic unit 1 Knoll oil filter Without collets and ejectors, without platform and without tool monitoring. supplied tooling may differ from the pictures. We can send you more pictures. The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

drum diameter:400 mm revolutions per minute:980 U/min total power requirement:2,2 kW Lanner batch wringer ME41-2 for deoiling of metal chips -turnkey delivery and easiest handling -very long service life, operation free of vibrations -compact and easy to maintain, i.e. low maintenance costs and quick return of investment -standard execution consists of lid with pneumatic spring and electro-magnetic lid locking , unbalance detection switch and standstill control -including control cabinet laterally placed, i.e. not in swivel range of crane -drum volume 35 Liter/max. 50 kg -rotation speed max. 980 min-1 -power 2,2 kW Painting: RAL 5012 light blue (batch wringer, crane support) RAL 1003 signal yellow (traverse) RAL 7035 light grey (control cabinet) In each case silk gloss. Changes after consultation. Also included in the scope of delivery: -Crane support with swivel arm: mounted on the side ...

Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Working height: variable from 0,5mm ? 150mm adjustable Working width: 1150 mm Maximum part weight: 300 kg Wide belts with abrasive belt unwinding: 2200 mm As standard with vacuum hold system, optional with magnetic hold system Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 3 internal machining units and an additional external machining unit. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 1350 mm Maximum part weight: 400 kg Wide belts with abrasive belt unwinding: 2620 mm As standard with vacuum hold system, optional with magnetic hold system By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 3 internal machining units and a ...

Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 1150 - 1350 mm Maximum part weight: 500 kg Wide belts with abrasive belt unwinding: 2620 mm As standard with vacuum hold system, optional with magnetic hold system By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 5 internal machining unit ...

Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Machine is suitable for heavy-duty use. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 650 - 1650 mm Maximum part weight: 2000 kg Wide belts with abrasive belt unwinding: 3250 mm As standard with vacuum hold system, optional with magnetic hold system By using 3250 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can acc ...

material width:180 mm coil weight:0,75 t material thickness:2,0 - 6,0 mm coil external diameter:400 - 1250 mm no. of straightening rolls:5 number of draw-in rolls:2 band speed:20 m/min power requirement:4,0 kW weight:2,8 t dimensions (WxDxH):1,4 x 2,45 x 1,85 m snubber roll:pneumatic

material width:500 mm coil weight:2 x 2,0 t material thickness:1,0 - 6,0 mm coil internal diameter:350 - 420 mm coil external diameter:1600 mm no. of straightening rolls:9 straightening roll diameter:50 mm number of draw-in rolls:2 speed:0 - 40 m/min material thickness at 500 mm material width:3,5 mm power requirement:17,5 kW Dimensions (WxDxH):2,3 x 4,2 x 2,4 m straightening machine:RM 5050.4/9 double decoiler:AH 2000/2/M snubber roll:pneumatic interchangeable jaws:130 mm expansion of the inner diameter

material width:800 mm coil weight:12,0 t coil internal diameter:470 - 520 mm coil external diameter:1500 mm material thickness:0,4 - 2,5 mm no. of straightening rolls:8 straightening roll diameter:53 mm number of draw-in rolls:2 inlet roll diameter:160 mm speed:35 m/min material thickness at 150 mm material width:2,5 mm material thickness at 650 mm material width:1,5 mm material thickness at 800 mm material width:1,0 mm straightening machine:RM 8-53/160-800 decoiler:HE 200-1000

material width:250 mm coil weight:2,5 t coil internal diameter:430 - 520 mm coil external diameter:1650 mm material thickness:0,5-6 mm no. of straightening rolls:7 straightening roll diameter:60 mm number of draw-in rolls:2 weight straightener:1,2 t weight decoiler:1,4 t dimensions straightener (WxDxH):1,2 x 1,2 x 2,0 m dimensions decoiler (WxDxH):1,8 x 1,8 x 2,3 m expansion:hydraulic

material width:450 mm material thickness:1,0 - 14,0 mm coil weight:10,0 t coil internal diameter:470 - 520 mm coil external diameter:1100 - 2000 mm no. of straightening rolls:12 straightening roll diameter:2x70 / 2x96 / 8x127 mm number of draw-in rolls:2 inlet roll diameter:160 mm min. material width:100 mm speed:15 m/min power requirement:75,0 kW weight of decoiler:6,4 t weight of straightening machine:12,8 t dimensions decoiler (WxDxH):3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH):2,5 x 3,4 x 2,7 mm straightening machine:RMS-Vario-12-70/96/127-0450 infinitely variable drive:insert drive upper straightening part:hydraulic liftable loop bridge:hydraulic driven threading wedge:hydraulic decoiler:HES 12-650 infinitely variable drive:insert drive lag brake:pneumatic snubber roll:hydraulic; motoric driven expansion:hydraulic coil lifting device:hydraulic cropping shears:HS-150-0450

pressure:40 t throat:350 mm material thickness: - 12 mm stamping power-diameter at 12 mm material thickness:24 mm stamping power-diameter at 6 mm material thickness:50 mm power requirement:2,2 kW weight:1,5 t dimensions (WxDxH):0,8 x 1,5 x 1,9 m

material width coil line:600 mm coil weight in kg:2 x 3000 kg coil internal diameter:460 - 630 mm coil external diameter:1500 mm material thickness coil line:0,5 - 3,0 mm Number of Straightening rolls:9 roll diameter:30 mm material cross-cut:1200 mm² weight:9,5 t Dimensions (WxDxH):4,3 x 2,6 x 2,6 m straightening machine:30.600/9 double decoiler:Kohler, 3000.2 ausiliary drive:hydraulic lag brake:pneumatic expansion:hydraulic snubber roll:hydraulic; motoric driven

NOACK Blistering machine type DPN 760, This equipment is ideally designed to condition small batches., Sold with a very wide range of formats., Elec:: 380V / 50 Hz , Air intake:: 8 bar max , Maximum cadence per minute : 240 , Maximum blows per minute: 4, Maximum forging surface area (mm): 155x138 , Maximum forming depth (mm): 25 , Dimensions (mm): 2900x690 H 1590, Weight (Kg): 1017 Kg

CNC Thread rolling and gear burnishing machine ESCOFIER P440 CN CNC Siemens New 2004 - like new 2-roll 2 moving heads workpiece diameter: 100mm max. tool diameter: 180-245mm Swivelling: +/-6°, forward speed: 0.1-20mm/s, reverse speed: 0.1-30mm/s motor power: 8.6kW New: 2004 Condition: like new This machine can be inspected under power in our warehouse in Gussago BS (Italy) Mimu Machine Tools

A used folding machine Horizon 746F 6 pockets 2 Sword 1 side pocket Shed display

Ilapak vertical bag form-, fill- and seal machine, type: VT 2000 OF P, serial number: 0630740047 S 3147 / 14, year of construction: 05/2014, 400 V, 50 Hz, diameter filling pipe: 170 mm, vertical seal length: 440 mm, horizontal seal width: 450 mm, total dimensions: 2250 mm x 1750 mm x 2250 mm.

Koppens belt fryer, type: BR 4500/600, machine number: 1219, year of construction: 1998, 400 V, 3 Ph, 50 Hz, 27 A, 13 kW, s/s belt, belt width: 600 mm, frying length: 4500 mm, total dimensions: 7620 mm x 1620 mm x 1880 mm. Including pallet wiht s/s belt, belt width: 600 mm and s/s switch cabinet, dimensions switch cabinet: 800 mm x 500 mm x 1700 mm. Without transport rollies.

Henkelman mobile double chamber vacuum machine, type: Titaan 2-90, machine number: HTN10190004, year of construction: 2019, 400 V, 3 Ph, 50 Hz, 5.5 kW, seal length: (4x) 850 mm, chamber dimensions: (2x) 850 mm x 900 mm, working hours: 46:32, Busch vacuum pump, type: RD 0360 A 5H3, capacity: 300 m³ per hour, total dimensions: 2500 mm x 1200 mm x 1150 mm. Only 40 working hours.

Stork/Alcoa bottle filling and closing machine with elevating belt, type filling and closing machine: 32 kops vuller + 8 kops sluiter, year of construction: 02-07-2008, dimensions: 3050 mm x 2300 mm x 3000 mm. Dico elevating belt, plastic belt, belt width: 200 mm, divider height: 55 mm, distance between dividers: 130 mm, total dimensions: 2450 mm x 800 mm x 3350 mm.

Serac rotating can filling and closing machine, type: R12 V6 / 1080, serial number: 165, year of construction: 1990, 380 V, 3 Ph, 50 Hz, 6 bar, plastic belt, belt width: 80 mm, 12 and 6 heads, clearance: 230 mm x 130 mm, total dimensions: 4550 mm x 2680 mm x 2770 mm. Including control panel, dimensions control panel: 700 mm x 620 mm x 2140 mm, switch cabinet, dimensions switch cabinet: 1200 mm x 410 mm x 2330 mm, 3 racks with parts, dimensions racks: (3x) 1400 mm x 1000 mm x 1680 mm, 2 pallets with worms and s/s parts, dimensions pallets: (2x) 1200 mm x 800 mm x 450 mm and 2 lid feeders, dimensions: (2x) 1000 mm x 700 mm x 2160 mm.

Procomac rinser for empty bottles, machine: GRIPSTAR, type: 1R 8.32.131, serial number: P573, year of construction: 1986, 415 V, 50 Hz, 1.5 kW, for bottles of 300 and 500 ml, 32 stations, total dimensions: 3100 mm x 2400 mm x 2300 mm. Including pallet with parts and Siemens control, dimensions pallet: 3100 mm x 1200 mm x 500 mm.

Cabinplant rotating filling machine, type: Rotation filler, number: 7395-03, year of construction: 1998, 400 V, 3 Ph, 50 Hz, 8/30/50 A, s/s infeed bunker, plastic belt, belt width: 800 mm, total dimensions: 2200 mm x 1140 mm x 650 mm, s/s vibrating gutter with plastic outfeed belt, belt width: 740 mm, total dimensions: 2100 mm x 700 mm x 280 mm, s/s rotating station, dye: Ø 50 mm, clearance: 340 mm x 360 mm, total dimensions: Ø 2300 mm x 1800 mm, rotating station, dye: 130 mm, plastic belt, belt width: 120 mm, transport belt with s/s belt, belt width: 120 mm, total dimensions: 7700 mm x 5000 mm x 3600 mm. Including 3 pallets with parts.

Avercon packaging machine, type: WRAP AROUND/TRAY PACKER, number: 663, year of construction: 2009, 380 V, 3 Ph, 50 Hz, 25 A, clearance denester: 480 mm x 560 mm, belt with dividers, clearance belt: 350 mm x 290 mm, plastic rollers, roller width: 550 mm, total dimensions: 4100 mm x 2700 mm x 2420 mm. Product: Apple sirup, 2 types of trays: 350 gram, Ø 94 mm, height: 82 mm, speed: 80 pcs / minute and 450 gram, Ø 94 mm, height: 103 mm, speed: 80 pcs/minute,

Imball SRL carton sleever machine, model: Multipack 200 R P340 DX, serial number: 909080040, 400 V, 50 Hz, 11 kW, weight: 2500 kg, clearance: 275 mm x 250 mm, plastic lane with dividers, lane width: 90 mm, distance between dividers: 350 mm, plastic outfeed belt, belt width: 90 mm, with Nordson glue unit, model: Series 3500 V, total dimensions: 7000 mm x 1400 mm x 2500 mm.

Langguth GmbH & Co rotating labelling machine with 3 Herma labelling units and Nordson glue unit, type: moduLAN 812, machine number: 812.003, year of construction: 2015, 12 stations, diameter station: 115 mm, maximum foil width: 245 mm, Nordson glue unit, type: PROBLUE 4, serial number: SA14L09372, 400/230 V, 50/60 Hz, 26 A, total dimensions: 4590 mm x 3000 mm x 2800 mm. Including 7 pallets with parts.

STM Sp. Z o.o. bottle filling machine, model: ARROW PET 9/9/3 NC, machine number: 25_01_2014, year of construction: 2014, 400 V, 3 Ph, 11 kW, capacity: 3300 uph 0.5 l, 9-heads, plastic belt, belt width: 80 mm, bottle diameter: 60 mm, cap diameter: 30 mm, total dimensions:: 2100 mm x 1900 mm x 2400 mm. Including s/s tank and centrifugal pump.

Henkelman mobile double chamber vacuum machine, type: POLAR 2-85, serial number: P500702016, year of construction: 2007, 400 V, 3 Ph, 50 Hz, 20.5 A, 7 kW, Busch vacuum pump, type: RA 0302 D 5Z1 QMXX, capacity: 300 m³/h, seal length: (4x) 830 mm, chamber dimensions: 830 mm x 830 mm, total dimensions: 1900 mm x 1300 mm x 1100 mm.

Frey Maschinenbau vacuum filling machine with lifter for 200 liter meat bins, type: F-Line F223, machine number: F223PT1092864, year of construction: 2014, 400 V, 50/60 Hz, 10.45 kW, Busch vacuum pump, type: RC 0021 C 3Z3, serial number: D18180231, year of construction: 2018, capacity: 24 m³ per hour, total dimensions: 2000 mm x 1300 mm x 2100 mm. Including box with various parts.

Ilapak vertical bag form-, fill- and seal machine, type: VT 2000 300 S, serial number: S 1806 06, year of construction: 06/2006, 400 V, 50 Hz, 5000 W, diameter filling pipe: 185 mm, vertical seal length: 435 mm, horizontal seal width: 300 mm, total dimensions: 2350 mm x 1500 mm x 1960 mm. Broken doors.

Manter bag filling and closing machine, type: WB-Le SA, serial number: 215-258, year of construction: 11-2015, 400 V, 3 Ph, 50 Hz, 9 A, weight: 350 kg, filling clearance: 100 mm x 150 mm, plastic belt, belt width: 300 mm, bag width: 240 mm, with Kwik Lok corporation automatic bag closing machine, type: 865A, model: AKM57NRPL, serial number: 94950-2012, total dimensions: 1500 mm x 1420 mm x 2040 mm. Including Busch vacuum pump, type: RA 0063 F 503, serial number: D15240221, year of construction: 2015, Vmax: 76 m³/h, dimensions: 750 mm x 380 mm x 540 mm.

Cimbria S.r.l. colour sorting machine, model: CHROMEX-3 TN-TR, serial number: CX3-TN-TRC1680-17, year of construction: 2017, 230 V, 1 Ph, 50-60 Hz, weight: 1060 kg, 6 digital color cameras and additionally 3 NIR and 3 NIR InGaAs cameras for best possible detection, 2 CCD cameras per chute for real color detection, 4,048 pixels, camera resolution 0.07 mm/pixel, number of nozzles: 162, nozzle spacing: 5 mm, automatic interval cleaning of the detection system, chute width: from 810 mm, total dimensions: 1800 mm x 1100 mm x 2300 mm. Including 3 pallets with parts.

Horizon AFC 566 ACT Year of man. unknown Format (max.) 558 x 850 mm Format (min.) 128 x 148 mm

Grinding area 500 x 200 mm, automatic vertical infeed and SINUS magnet

very well preserved AVIA with 600 x 400 mm travel, stepless feed, Heidenhain display

Key data: 1000 mm, 400 kg

infinitely variable with STOBER control gear, various tools

Ref. -No.: 10400 Manufacturer: SCHIESS FRORIEP Year of construction: 1978 Type of control: Digital Storage location: Mülheim an der Ruhr Country of origin: Germany Machine-No.: 130XX Major overhaul: 2000 Support sleeve diameter: 390 mm X-Travel: 20000 mm Y-Travel: 3700 mm Z-Travel: 1400 mm V-axis travel: 1000 mm C-Axis: 360 ° Bed length: 21500 mm Bed width: 5000 mm Bore Spindle Diameter: 150 mm Working Spindle Diameter: 1400 mm Milling Spindle Diameter: 240 mm Turning Speed Range - Stepless: 2 - 795 RPM Turning Speed Range - Stepless: 3 - 1800 mm / min Rapid Traverse X-Axis: 1800 m / min Rapid Travel Y-Axis: 1400 m / min Creep Feed: 75 mm / min Drive Capacity - Spindle Motor: 51 kW Bore Depth: 1400 mm Weight Of The Machine Ca.: 100 t Further information: - Floor plates 5,000 mm wide x 21,500 mm long - Turntable is available 2,000 mm x 1,800 mm + V-axis 1,000 mm Currently, 15-meter-long ...

Ref. -No.: 10604 Manufacturer: UNION Year of construction: 2004 Type of control: CNC-Steuerung Control: SINUMERIK 840 D Powerline Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 1250 mm Z-Travel: 1000 mm W-Axis: 550 mm Table Height: 1050 mm Spindle Diameter: 110 mm Table Dimensions (Lengthxwidth): 1600 x 1250 mm Number of T-slots: 10 Max. Workpiece Weight: 6000 kg Clamping Area: 1250 mm T - groove width: 22 mm T - slot spacing: 125 mm Tool Taper: ISO 50 Max. Torque: 1639 Nm Feed Speeds X/Y/Z Axis: 6000 mm / min Rapid Traverse X-Axis: 15000 m / min Rapid Travel Y-Axis: 15000 m / min Rapid Traverse Z-Axis: 15000 m / min Feed Capacities X/Y/Z: 16000 x 16000 x 20000 N swivel angle: 360 ° Further information: Includes angle head 0,001° The machine can be viewed under power.

Ref. -No.: 10621 Manufacturer: PAMA Year of construction: 2008 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840 D PL Storage location: Halberstadt Country of origin: Italy X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 2200 mm W-Axis: 800 mm Bore Spindle Diameter: 160 mm Table Load: 12000 kg Tool Taper: ISO 50 BIG PLUS Turning Speeds: 3500 RPM Max. Torque: 2.765 Nm Rapid Travel X/Y/Z: 25000 mm / min Drive Capacity - Spindle Motor: 46 kW Internal cooling: 15 / 45 bar External cooling: 50 / 4 bar Table surface: 1600 x 2000 mm Spindle speed gear stage 1: 2.120 1 / min Spindle speed gear stage 2: 2.765 1 / min Further information: Automatic tool changer SK50 DIN 69871, 80 positions. Automatic angle milling head TS 35 with 360 positions, speed 2,000 rpm and torque 2,000 Nm. Automatic universal milling head TU25C (2-axis), speed 3,000 rpm and torque 800 Nm. Automatic accessory chan ...

Ref. -No.: 10636 Manufacturer: TOS VARNSDORF Year of construction: 2013 Type of control: CNC-Steuerung Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1400 RPM Spindle Speed: 2000 RPM Table size: 1800 x 2200 mm Further information: - The control system was converted to a HEIDENHAIN 530i in 2013. - All drives were upgraded to digital. Thrust bearing replacement on the tower also renewed in 2013. - Accessories: - 3D probe - Heidenhain, large spindle support - 1x Heidenhain axis module (completely overhauled), - 1 new axis module is installed in the machine. - Newly packaged spare parts, covers from the machine. - All bearings have been replaced on the machine in recent years. - Tools and milling cutter heads are  ...

Ref. -No.: 10658 Manufacturer: SCHARMANN Year of construction: 1973 Type of control: CNC Control: Heidenhain Storage location: Halberstadt Country of origin: Germany Machine-No.: 162XXX X-Travel: 3.000 mm Y-Travel: 2.000 mm Z-Travel: 1.250 mm Spindle Diameter: 140 mm Spindle Taper: ISO 50 Table Dimensions (Lengthxwidth): 1800 x 1500 mm Table Load: 15000 kg Turning Speeds: 2,3 - 810 RPM Spindle stroke: max.800 mm Total Power Requirement: 30 kW Table size: 2.000 x 1.500 mm Machine length: 7300 mm Machine width: 5600 mm Machine Height: 4000 mm Weight Of The Machine Ca.: 31 t Further information: - Faceplate with NC face slider and NC rotary table - Heidenhain digital readout - Various tool holders - Various clamping devices The machine can be viewed while powered on by prior arrangement.

Ref. -No.: 10548 Manufacturer: MONFORTS Year of construction: 1998 Type of control: CNC-Steuerung Control: Monforts Storage location: Halberstadt Country of origin: Germany Machine-No.: 303XXXX Chuck diameter: 250 mm Centre Distance: 1080 mm Spindle Diameter In Front Bearing: 100 mm Spindle head according to DIN 55027 (size): Gr. 8 Circumferential diameter over radial slide: 290 mm Max swing diameter: 500 mm travel of the cross slide: 265 mm Tailstock outside diameter of the quill: 80 mm Tailstock maximum quill stroke: 160 mm Tailstock inner cone: MK 5 Type Material flow max.: 70 mm Turning Speed Range: 2 - 2800 rpm Further information: The machine can be viewed under power by arrangement.