sizing machine used for sale

Free-standing front-loading washing machine Bauknecht WAM 814 A. • Capacity: 8 kg • Maximum spin speed: 1,400 rpm • Energy efficiency class: A • Weighted energy consumption: 47 kWh/100 washing cycles • Weighted water consumption: 48 litres/cycle • Inverter motor and Digital Motion technology • Stain 40° program, anti-allergy and short programs • AutoClean drum cleaning • Display with remaining time display and start time preselection • Multiple water protection and child lock • Spin noise level: 76 dB(A) • Device dimensions H × W × D: approx. 85.0 × 59.5 × 60.5 cm Auction-ID: A1-51488-52

turning diameter: 480 mm turning length: 1000 mm control: Manual Plus Heidenhain total power requirement: - kW weight of the machine ca.: 3 t dimensions of the machine ca.: 3x2x2,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralHorizontal Machining Centre; Control: Fanuc F31iB CharacteristicsSpeed max.-14000 rpmDrive power (100% DC)11 kWDrive power (40% DC)18,5 kWTable size400x400 mmSwivelling range360x1 degreeMaximum load (table centre)400 KgMax. work piece diameter630 mmMax. work piece height900 mmPalett changer with2 PalletMovement X / Y / Z560/560/630 mmRapid feed X / Y / Z50/50/50 m/minTool Magazine with40 PositionsSpindle taperBT 40 Max. tool length400 mmDimensions (L x W x H)2,36 x 3,92 x 2,72 mWeight approx.9600 KgSpecial equipmentJ-011462 Tool holder taper for BT-40 tool holders J-011460 Max. spindle speed 14,000 rpm, 18.5/11 kW J-011470 Scraper-type chip conveyor with drum filter, rear discharge J-007252 CTS (DIN Form B) coolant supply through the spindle J-011461 40-station tool Special equipmentJ-001212 Coolant gun for the operator side J-003686 Manual pulse generator, handwheel (separate typ ...

table length: 3048 mm table width: 1524 mm burner heads: 1 Control: CNC workpiece weight: 911 kg traversing speed: 80 m/min dimensions of the machine ca.: 5600 x 2260 x 1960 mm 1. BodorPower 6 kW laser source 2. BodorGenius laser cutting head with autofocus 3. BodorThinker 3.0 control system 4. Bed with tenon-and-mortise structure 5. Bodor servo motor and driver 6. Bodor oxygen control valve and nitrogen control valve 7. Bodor Lightning perforation technology 8. 21.5-inch touchscreen monitor 9. Automatic cutting gas pressure adjustment 10. Active anti-collision function 11. Intelligent vibration protection 12. Burn-resistant mineral cast housing 13. Bodor Mango® ergonomic remote control 14. Gas-saving nozzles with stable flow 15. Smart maintenance reminder 16. Wi-Fi internet connection 17. Smart alarm for anomalies 18. Water cooling 19. Wear parts kit 20. Exhaust system 21. Nitrogen p ...

General2-Axes Universal Turning Center with driven tools, C-axis; Control: DMG MORI Slimline Multi-Touch Working areaSwing diameter over guide ways950 mmClamping chuck diameter max.500 mmWork spindle (left)Spindle bore141 mmSpindle diametre on front bearing200 mmMain drive 1Drive power (100% DC)33 kWDrive power (40% DC)50 kWSpeed range- 2000 rpmTorque (100% DC)1125 NmMax. torque (40% DC)1700 NmC-Axis Speed-200 rpmSlide 1Longitudinal stroke1300 mmTransverse stroke435 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988050 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)12,5 kWFloor space/WeightDimensions (L x W x H)4,07 x 2,74 x 2,20 (5,33 x 2,74 x 2,20) mWeight approx.10000 KgElectronic handwheelManual movement of individual axes in various increments DMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines wit ...

GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS X with HEIDENHAIN TNC7 Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical850 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools183 Motor spindle HSK-A63 20.000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (95 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) Taper cleaning brushesTaper cleaning unit with rotating brushes for spindle taper HSK Stop block + 3-point-supportStop block + 3-point-support Design according to DECKEL MAHO Standard Tool magazine, wheel, 183 pocketsTool magazine wheel maga ...

tube diameter: 8 - 230 mm workpiece weight: 300 kg weight: 2450 kg dimensions of the machine ca.: 9374 x 1872 x 2285 mm Technical Specifications: Max. diameter of round tubing (mm): 8 - 230 Max. diameter of square tubing (mm): 8 - 230 Rectangular tubing (mm): 8 - 230 Profile (mm) Angle steel: 30 - 140 Channel steel: 50 - 140 I-beams: 100 - 140 H-beams: 100100 - 140140 Max. pipe material length (mm) 6500 Max. cut pipe length (mm) 3000 Max. workpiece weight (kg) / (kg/m) 300 / 46 Max. acceleration 1G Shortest remaining material (mm) 70 Positioning accuracy (mm) 0.05 Repeatability (mm) 0.03 Max. material thickness, carbon steel (mm) 16 Max. material thickness, stainless steel (mm) 12 Configuration 1. BodorPower laser source, 6 kW 2. BodorGenius T high-precision laser head with autofocus 3. BodorThinker Tube control system 4. Pneumatic chuck 5. Bodor Lightning perforation technology 6. Adapt ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 13600 € : 261.12 € : 1300 mm : 150 mm : 150 mm : 250x350 mm : 945 mm : 0.75 kW : 1400 mm : 1000 mm : 1450 mm : 300 kg Easy T is a manually operated deburring machine suitable for various metalworking processes such as grinding, deburring, edge rounding and polishing for various types of materials - stainless steel, steel, copper, brass and aluminum. The grinding head with two rotating tools (grinding wheel or brush) is mounted on a swivel arm. The Easy T is equipped with a freely adjustable speed and a vacuum system, so that workpieces are fixed on the table. It is a cost effective and effective solution for conventional grinding and deburring. All edges of the workpiece are machined from all angles and directions. The grinding head can be swiveled through 180 ° and enables a quick change of the grinding tool. Properties: The grinding  ...

• 2 x veg washing conveyors A pair of vegetable washing conveyors, suitable for washing and moving produce along a packing or processing line. Ask us for dimensions, belt type and drive details to check they will fit your line. We run balers, granulators and shredders on our own site at Wymeswold, near Loughborough, so we can talk you through how a machine like this would suit your material and throughput.

Key data: 2200 mm, 1500 mm, 1000 mm

Description, subject to prior sale. CNC 5-axis gantry milling machine with high dynamics Manufacturer: Parpas Type: Diamond linear Year of manufacture: 2013, Acceptance: 2014 Control: Heidenhain iTNC530 X (longitudinal travel): 2200 mm (+330) Y (transverse travel): 1500 mm (+330) Z (vertical travel): 1000 mm Distance between uprights: 2700 mm Max. distance between table surface and spindle tip with mounted milling head 1220 mm Linear axis feed speed: X and Y axis 0-60 m/min Z-axis 0-40 m/min Table surface: 2300 x 1600 mm Max. weight with optimal distribution: 6000 Kg/m2 T-slots 22 mm, distance between T-slots 200 mm. 5-axis orthogonal milling head with electrospindle Max. spindle speed 20,000 min-1 Spindle cone HSK 63 A A-axis ±105° (torque 830 Nm), C-axis ± 370° (torque 1200 Nm) 42 Stations Tool Changer Tool holder HSK 63A-100 Max. tool∅ 80mm  ...

Offer 24014 Technical data: - Rated power at 50% ED 40 kVA - Max welding power 118 kVA - Adjustable projection 225 - 550 mm - Welding values - sheet steel 4 + 4 mm - Brass sheet 2 + 2 mm - Aluminium sheet 1 + 1 mm - Electrode force adjustable 65 - 390 daN - Required air pressure 6 - 10 bar - Cooling water volume 8 l/min - Control for: Retention time; Current time; - Holding + holding time, and - Pulse + pause time - Drive 380 V - Space requirement approx. W 600 x H 1350 x D 1550 mm - Weight approx. 330 kg - with: - complete electrical + pneumatic equipment - 6-time synchronous control MPS 1036 - Foot switch

1500 x 2500mm plus reposition 45 Station 4 Index Air Blow system Vacuum slug removal Full brush table Under power and can be inspected. Available via our online auction, closing on 19th January 2027 at 15:00 UK Time.

Automatic tool grinding machine

SCHRÖDER MAK3 3000/4.0 sheet metal folding machine was built in 2013 in Germany by Hans Schröder Maschinenbau GmbH. The machine is designed for the precise folding of sheet metal with a maximum length of 3000 mm and a thickness of 4 mm. It enables repeatable bends at a specified angle, making it suitable for the production of sheet metal components with various geometries, used in many industries. The folding process involves clamping the sheet metal against the worktable using a clamping beam, then bending the protruding section with a folding beam. The mechanical drive used provides the force required to effectively fold the sheet metal along the machine’s entire working length. Operation of the machine is facilitated by the SCHRÖDER POS 2000 controller, which enables quick programming of working parameters. The SCHRÖDER MAK3 mechanical folding machine weighs 4150 kg. Tech ...

Year of construction 2020 manual bookbinding machine Tabletop model for manual operation Delivery date: short-term

1991 build. For spares and repairs sold as-is

GLEASON PFAUTER P 60 Hobbing machine GENERAL Project No.: 906016 Quantity: 1 pcs. Manufacturer: GLEASON PFAUTER Type: P 60 Control: Siemens 840 D solutionline Year of Make: 2016 Condition: Used machine Approx. (hrs): 20725 Spindle Approx (Hrs): 14204 DESCRIPTION GEAR CUTTING Max. head circle diameter 80 mm Module 2.5 mm Swivel angle of the milling head -45/+115 degrees Max. diameter hob 118 mm Max. length hob 120 mm Max. speed milling spindle 5000 1/min Max. speed workpiece spindle 3000 1/min Tailstock OTHER EQUIPMENT Splash protection cladding with fully encapsulated working area Lighting in the work area Oil/Emulsion Mist Extraction System Magnetic chip conveyor Coolant Setup Parts Feed Conveyor Parts Discharge Belt Internal loading/unloading portal GENERAL TECHNICAL DATA Machine dimensions (LxWxH) approx. 2700x2180x2310 mm M ...

Vitap Sigma 2TAS Through Drill 3 vertical drilling units of two heads each 2 side spur spindles Spindle spacing 32mm Length of the processed material max 2500mm min 240mm Drilling depth up to 70mm Pneumatic Material Clamps Year of manufacture 2005 CE mark Machine Weight 1600kg Dimensions 390x180x145cmH Net price

The machine is in good technical condition; it can be tested by prior arrangement.

SCM Sandya Win Wide Belt Sander Working width 630 mm Grinding height 3 – 160 mm 1 combi unit Electric height adjustment Optical Oscillation Two types of feed speed 5.5kw main power Net price

Renz Autopunch AP 360 V4 Automatic Perforator - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Renz Autopunch AP 360 V4 Automatic Perforator Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Renz Autopunch AP 360 V4 Automatic Perforator Price: 21000 EUR Download PDF Renz Autopunch AP 360 V4 Automatic Perforator The machine is in very good condition. Manufactured in 2008. Includes a 3:1 perforation tool, a round hole, and a cutout for the hanger. Manufacturer’s description: Perforation machine with a working width of up to 360 mm Designed for continuous operatio ...

One semi new EVG ATT mesh welding line Flexible welding line for the production of standard and special reinforcement panels, from small batches up to large production runs Automatic feeding of longitudinal and transverse wires from coils via synchronised multi-track RA-XE-type rotor straightening lines with single or double wire feeding, equipped with up to 10 rotors Automatic feeding of the cross-wires from rolls via a multiple-needle system specific to the equipment Producción «just in time» de distintos tipos y geometrías de paneles High production speed combined with short changeover times No need to flip panels, as the cross-wires are fed and welded either above or below the longitudinal wires

The machine must be dismantled and loaded by the buyer himself. The transport and loading equipment that may be required for this purpose must be organized and provided by the buyer himself. The collection must take place by 11.12.2026 at the latest. If the machine has not been picked up by this date, it will be relocated or, if necessary, disposed of at the buyer's expense. machine Manufacturer: MAHO Type: MH 700 C Machine Type: CNC Milling Machine data Travel X/Y/Z: 700 / 450 / 500 mm Tool holder: ISO 40 Quill stroke: 100 mm Speed range: 20–3150 rpm Feed X/Y/Z: 1–3000 mm/min Rapid traverse X/Y/Z: 6 m/min Feed force X/Z: 8000 N, Y: 24000 N Dimensions Weight: approx. 3900 kg Length: 3400 mm Width: 3430 mm Height: 2200 mm Electrical details Voltage: 220/380 V Total connected load: 40 kVA Auction-ID: A7-51502-120

Incl. accessories consisting of: e.g. various buttons Clamping plate (red) Control panel Control cabinet, dimensions (LxWxH) approx: 800x800x850 mm 1 desk, dimensions (LxWxH) approx: 1120x800x850 mm 1 office swivel chair 2 computers HP workstation b2699 1 monitor FUJITSU 1 HP keyboard 1 HP printer Auction-ID: A1-51205-12

With wire feeder. Control board is missing. Auction-ID: A1-51529-65

Auction-ID: A1-51529-109

It is a multifunctional fatigue testing machine suitable for samples, structures, and full-scale parts. It is a type of suspended actuator with a wide test space, so it is ideal for various types of environmental tests, such as those performed in corrosion tanks or constant temperature tanks. THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according ...

Manufacturer: CLEANCUT Model: SA-600 Year of manufacture: 2001 X-axis travel: 610 mm Y-axis travel: 630 mm Z-axis travel: 350 mm Dimensions: approx. 1900 x 1900 x 2700 mm Table: 950 x 500 mm Transport dimensions: approx. 1900 x 1900 x 2700 + 1 pallet Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51153-10

Weight approx. 66 kg, Load capacity approx. 2000 kg at 500 mm, Fork dimensions approximately: 990x80x40 mm, Incl. pallet Auction-ID: A1-51519-1076

Machine Type Radial Drilling Machine Manufacturer MAS Kovosvit Model VO50 Origin Czech Republic (Sezimovo Ústí) Serial Number 1123 Machine Type Heavy-duty industrial radial drill Working Capacity Item Specification Max Drilling Capacity (Steel) Ø50 mm Max Tapping Capacity approx. M42 Spindle Taper Morse Taper MT5 Spindle Stroke (Quill Travel) approx. 250 – 315 mm Machine Geometry Item Specification Column Diameter approx. 350 – 400 mm Arm Length (Column to Spindle) approx. 1000 – 1600 mm Max Spindle to Base Distance approx. 1600 mm Min Spindle to Base Distance approx. 300 mm Spindle & Feeds Item Specification Spindle Speed Range approx. 25 – 2000 rpm Number of Speeds 12 – 18 gearbox speeds Feed Rates Mechanical automatic feeds Feed Steps Multiple (gearbox controlled) Movements Axis Specification Arm Vertical Movement Motorized Arm Rotation 360° around column Head Trave ...

Magnet dimensions: 600x1250mm. Power: 25 kW. Incl. 1 spare grinding wheel. 1 workbench. Auction-ID: A1-51529-28

MATABOSCH H-6 – Hydraulic Vertical Baling Press Manufacturer: J. Matabosch S.A. Model: H-6 Year of Manufacture: 1985 Country of Origin: Spain Condition: Used Technical Specifications Description Specification Manufacturer J. Matabosch S.A. Model H-6 Machine Type Vertical Hydraulic Baling Press Year of Manufacture 1985 Pressing Force 10 Tons Motor Power 2 HP (CV), approx. 1.47 kW Electrical Supply 380 V Drive System Hydraulic Press Configuration Vertical Loading System Front Loading Chamber Hydraulic Cylinder Vertical Operation Manual Hydraulic Controls Bale Ejection To be confirmed Machine Serial Number 2676 Construction Heavy-Duty Steel Frame Manufacturer Location Barcelona, Spain Auction-ID: A1-51153-101

Various Machine Tools and Measuring Instruments Type: Assorted machine tools and precision measuring equipment Contents: Mixed lot including micrometers, internal measuring rods, dial indicators, tool holders and gauge blocks Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51153-85

Wire feeder type: Terrix Drive 4 ROB. Auction-ID: A1-51529-58

Brand: Iseki Model: SRA 600 Briggs & Stratton combustion engine Hydrostatic transmission Belly cutting deck Cutting height adjustment Studded tires Keyed start Counter: 79 hours Manufacturer's warranty: 2 years, depending on the seller Used twice for demonstrations. According to the salesperson, the ignition remained engaged in the store without using the machine, which explains the number of hours displayed on the counter. Auction-ID: A3-46114-35358

FRIEDRICH DECKEL SOE – Optical Single-Lip Tool & Cutter Grinder Manufacturer: Deckel Model: SOE Machine Type: Optical Single-Lip Tool & Cutter Grinding Machine Country of Origin: Germany Condition: Used Year of Manufacture: Not specified Technical Specifications Specification Details Grinding Spindle Speed 4,500 rpm Grinding Motor Power 0.55 kW / 0.75 HP Motor Speed 2,800 rpm Grinding Wheel Dimensions 100 × 50 × 20 mm Tool Clamping Diameter 0.5 – 18 mm Maximum Tool Diameter with Special Holder 25 mm Lateral Adjustment 10 mm in both directions Longitudinal Adjustment 40 mm Maximum Relief Angle 45° Indexing Head Fine Adjustment 15 mm Indexing Positions 12 Compatible Taper Collets MT1, MT2, GA Compatible Taper Adapters MT1, MT2, MT3 Optical Projector Magnification 8× (optional equipment) Microscope Magnification 20× (optional equipment) Machine Dimensions (L × W × H) 660 × 570 ...

Finn-Power A5-25 FB Punching Machine Type: Punching machine Manufacturer: Finn-Power Model: A5-25 FB Year of manufacture: 1999 Punching capacity: 23 t Max. sheet thickness: 4 mm Approx. machine weight: 12,000 kg Approx total dimensions (L x W x H): 6000 x 6000 x 2000 mm X/Y-axis feed rates: 2500/1250 mm JETCAM software Tools: Included Brush table Max. hydraulic pressure: 300 bar Power supply: 3 x 400 V, 50 Hz Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51153-6

Control: RS15. Auction-ID: A1-51529-108

CRETEL ST 350 professional machine for skinning/peeling in the food processing sector, especially for applications in the fish market and production halls. Robust construction suitable for professional use, with stainless steel surfaces and work elements. Features: • Brand: CRETEL • Type: ST 350 • Year of manufacture: 1991 • Working width: approx. 350 mm • Power supply: 3 x 220 V • Professional construction • Stainless steel structure and work area • Electrically driven work roller • Foot pedal control allows the operator to keep their hands free • Control button on the machine • Emergency stop • Adjustable roller guards and guides • Machine installed on stainless steel frame/support • Bottom shelf for storage • Mobile set on wheels • Cable and electrical outlet present • Manufacture CRETEL, Eeklo – Belgium The machine is in good general visual  ...

BOND RX fully automated research stainer. Make that next big breakthough with confidence. From IHC to ISH, FISH, CTC, Multiplexing and more System with LEICA Bond Rx , computer (no software, only computer) , scanner , and printer label code Auction-ID: A1-51527-25

Bridgeport Interact 1 CNC Milling Machine Type: CNC milling machine Manufacturer: Bridgeport Model: Interact 1 X-axis travel: 457 mm Y-axis travel: 305 mm Z-axis travel: 365 mm T-slot table size: 410 x 1065 mm Speed range: up to 4000 rpm Machine weight: 1600 kg Dimensions (L x W x H): approx 1700 x 1300 x 2300 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51153-19

Universal cylindrical/internal grinding machine with motorized spindle, workhead/chuck and manual controls. Used condition, suitable for repair, refurbishment or workshop use. Manufacturer and model not visible; specs to be confirmed. Auction-ID: A1-51153-81

Professional pneumatic drilling machine for natural-stone quarrying and block production. Rail-mounted configuration with single pneumatic rock drill, vertical drilling mast, automatic/adjustable drill thrust, pneumatic travel along the rails and adjustable drilling-head mounting for drilling at different angles. Equipped with rail system, adjustable levelling supports, pneumatic rock drill, drill feed mechanism, pneumatic drive, separate Pellegrini Slim Bar Super control unit, pressure regulator/gauge, air hoses and connections. Operating/maintenance and spare-parts manual included. Approximate assembled dimensions: 3,400 × 1,200 × 3,200 mm (L × W × H). Manufacturer-specified standard rail length 3.4 m. Machine weight approx. 250 kg including rock drill. Condition: used. Main mechanical components appear present from the photographs. Operational condition has not been independen ...

Cegonheira conventional centre lathe with chuck, toolpost, tailstock and screwcutting gearbox. Used industrial lathe; centre distance, spindle bore and operation to be confirmed. Auction-ID: A1-51153-7

Jitem P-50 Wire EDM & Eroding Machine Type: Wire EDM and eroding machine Manufacturer: Jitem Model: P-50 X-axis travel: 400 mm Y-axis travel: 300 mm Z-axis travel: 400 mm Approx. dimensions (L x W x H): 2220 x 2300 x 2150 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51153-29

Automatic stone edge polishing / profiling line Rated power: 29.8 kW Voltage: 400 V Frequency: 50 Hz Weight: 3,000 kg Industrial automatic edge-processing and polishing machine manufactured by Marmo Meccanica, designed for continuous processing of natural and engineered stone slabs and strips. The machine is configured as a horizontal conveyor-type production line with multiple motorized processing stations. Material is transported through the machine on the integrated conveyor while the successive processing heads perform edge grinding, profiling and polishing operations. Good used industrial condition. Operational performance, tooling condition, individual spindle condition and accuracy have not been independently verified. Auction-ID: A1-51282-10

KraussMaffei 50-190 C1 Injection Moulding Machine Type: Injection moulding machine Manufacturer: KraussMaffei Model: 50-190 C1 Year of manufacture: 1994 Serial number: 44236 Screw diameter: 30 mm Closing force: 500 kN Mould opening stroke: 350 mm Ejector stroke: 100 mm Injection pressure bar: 2222 Ejector force: 22 kN Electric connection: 400 V Approx. machine weight: 2300 kg Approx total dimensions (L x W x H): 3191 x 1500 x 1887 mm Tie bar spacing (H x V): approx. 321 x 321 mm Mould height range (min-max): ~200 mm - 550 mm Max. shot weight: ~66 g PS (polystyrene equivalent) Platen size: ~540 mm × 540 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51153-44

1 control MS1000. Auction-ID: A1-51529-142

Weight approx. 66 kg, Load capacity approx. 2000 kg at 500 mm, Fork dimensions approximately: 1190x80x40 mm, Incl. pallet Auction-ID: A1-51519-1078

Mixed lot of professional pipe-working and threading equipment, predominantly RIDGID, including a RIDGID 300 power drive/threading machine, multiple threading die heads, manual threading equipment, pipe supports/clamps and assorted installation accessories. Supplied with heavy steel storage crate. Main machine: Manufacturer: RIDGID / Ridge Tool Model: RIDGID 300 Type: stationary electric pipe threading power drive Heavy cast-metal construction Front pipe chuck/clamping assembly Rear centering/clamping mechanism Twin support bars Electric drive RIDGID foot-operated control pedal included Power lead and plug included Auction-ID: A1-51282-55