136,842 used machines on RESALE, but how to find them? Machine Search
Key data: 3 mm, 60 mm, 4500 mm
SCM Olimpic K360 - Single-sided edge banding machine - Year of construction 2021 - Immediately available - Top condition
OKUMA TwinStar LT200-M - CNC lathe - Year of construction 2006 - Immediately available
Conveyorized chamber vacuum packaging machine for industrial food processing, This VC999 K7B2 is a conveyorized chamber vacuum packaging machine, built by VC999 Verpackungssysteme in Switzerland, with a stainless steel, all-enclosed construction that avoids sharp edges and corners where dirt could collect. The machine runs two to three cycles per minute and features bi-active sealing bars with electronic temperature control and adjustable contact pressure, allowing secure sealing even with greasy or moist products. The B-version adds a perforation blade with bag waste suction on both sides, so trim is removed automatically during the cycle. Evacuation stops at the evaporation point, protecting product quality throughout the process., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/vc999-k ...
Labeller that applies a label to the top and the bottom, This machine labels a pack on both sides in a single pass. The pack runs along the conveyor; the head above the belt places a label on the lid, the head below the belt presses one onto the base. A good fit for trays and tubs that need a label on each side., It is operated from a touchscreen on a column next to the conveyor. There is no rating plate on the machine, so the make and year of manufacture are unknown., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/top-and-bottom-labelling-machine/, Type: Labelling machine, top and bottom label, Label heads: 2 (above and below the belt), Controls: Touchscreen, Construction: Stainless steel frame on adjustable feet
Marel labeller for the top and the bottom of the pack, This Marel labelling machine puts a label on the top and on the bottom of a pack in one pass. Packs come in on the conveyor with adjustable guides; the head above the belt labels the lid and the head below the belt labels the base., It is operated from a touchscreen next to the conveyor. The rating plate is still on the machine, but only the Marel name can be read, so the model and year of manufacture are unknown., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/marel-top-and-bottom-labelling-machine/ , Type: Labelling machine, top and bottom label, Label heads: 2 (above and below the belt), Infeed: Conveyor with adjustable guides, Controls: Touchscreen
Compact VFFS machine that forms, fills and seals bags, This Audion turns a reel of film into pillow bags: the film is formed around the filling tube, sealed along the seam and closed at the bottom, after which the product drops into the bag from above. Suitable for dry, free-flowing products such as pasta, snacks or cut vegetables, fed by a weigher or doser., It is built compactly on a stainless frame with castors and has a touchscreen with adjustable seal temperatures. We did not find a rating plate with the model or year., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/audion-vertical-form-fill-seal-machine/ , Type: Vertical form fill seal machine (VFFS), Bag style: Pillow bag, Film transport: Two pull belts along the filling tube, Controls: Touchscreen, adjustable seal temperatures, C ...
Places cups into your packs automatically, This machine by Steven BV of Joure (NL) was built to place small cups, for example with sauce or dressing, into packs automatically. Cups come from the supply bin at the top and are guided down through the chutes. The frame stands on castors and its height is set with a handwheel, so it can be positioned over an existing conveyor., The rating plate shows it was built in July 2016, machine number 16016, supply 400 V., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/steven-bv-cup-dosing-machine/, Type: Cup dosing machine, Power supply: 400 V, Controls: Mitsubishi touchscreen, Dutch menus, Construction: Stainless steel frame on castors, height adjustable with handwheel
Asparagus peeling machine with eight stations, The Hepro Schäl-Automat HSM-180/SAP peels asparagus automatically. Spears are loaded and carried past the peeling heads, which remove the skin evenly. The machine has eight stations that can be switched on or off individually; peeled spears come out onto the side table., The rating plate shows it was built in 2008 by Hepro GmbH in Delbrück (Germany), supply 400 V, 50 Hz, 3 phase, 0.5 kW. The machine stands on castors., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/hepro-hsm-180-sap-asparagus-peeler/, Type: Asparagus peeler (Schäl-Automat), Stations: 8, each switchable, Power supply: 400 V, 50 Hz, 3 phase, 0.5 kW, Construction: Stainless steel, on castors
Used Urschel cutting machine, built entirely in stainless steel, This Urschel cutting machine stands on castors and is built in stainless steel. Product travels from the hopper into the cutting section; whatever has been cut leaves the machine on the other side through the discharge chute. Drive is by electric motor and belts, and the controls sit in their own box on the machine., The type plate is missing, so the year of manufacture and the exact type are not known. Testing with your own product can be arranged., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/urschel-cutting-machine/, Type: Cutting machine, Infeed: Hopper, Drive: Electric motor with belt drive, Controls: Own control box on the machine, Construction: Stainless steel, on castors
This 6-axis CUTLITE PENTA PLUS LM 9030 was manufactured in 2024. It features a powerful 20,000 W RAYCUS fiber laser with an impressive X-axis working range of 9,050 mm and Y-axis working range of 3,050 mm. The machine includes advanced capabilities such as a BEVEL autofocus cutting head and a double pallet system. If you are looking to get high-quality cutting capabilities, consider the CUTLITE PENTA PLUS LM 9030 fiber laser cutting machine. Contact us for further details.
Hydraulic injection moulding machine manufactured in 2019. This Engel Victory 120 BMG features a clamping force of 120 t and a tie-bar-less design, ensuring efficient operation. It includes a high-speed injection unit and an advanced CC300 control system with a 21.5 full HD touchscreen. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 120 BMG machine we have for sale. Contact us for further details regarding this machine.
Key data: 500 , 39 , 25
Presse à injecter électrique BILLION 50T série SELECT 80/50 avec DIXIT III Force de fermeture : 50 T Année : 2011 Diamètre vis : 25 mm Distance entre colonnes : 350 x 300 mm Dimensions des plateaux : 490 x 440 mm Epaisseur mini/maxi du moule : 150 - 400 mm Course d'ouverture : 250 mm Volume injecté : 39 cm3 Pression matière : 2040 bars Interface robot E67 Dimensions : 3,40 x 1,20 x 1,70 m Poids : 2 500 kg
BILLION 50T série SELECT 80/50 avec DIXIT 2 Force de fermeture : 50 T Année : 2011 Diamètre vis : 25 mm Distance entre colonnes : 350 x 300 mm Dimensions des plateaux : 490 x 440 mm Epaisseur mini/maxi du moule : 150 - 400 mm Course d'ouverture : 250 mm Volume injecté : 39 cm3 Pression matière : 2040 bars Interface robot E67 Dimensions : 3,40 x 1,20 x 1,70 m Poids : 2 500 kg
FANUC ROBOCUT α-C800iB Wire EDM Machine Technical Specifications: Max. Workpiece Dimensions: 1,250 × 975 × 300 mm Max. Workpiece Weight: 3,000 kg Wire Diameter: 0.10–0.30 mm Max. Taper Angle: ±30° / 150 mm Max. Wire Spool Weight: 16 kg
• Cylindrical grinding machine HTG600 H.Tschudin built in 1975 • CNC universal tool milling machine Deckel FP4A built in 1985 • Fanuc Robocut a-OB CNC Wire EDM Machine built in 1995
For sale is a professional Hexagon Absolute Arm 8530 with AS1 laser scanner. The system was used professionally and is in very good technical and visual condition. Areas of application • Series accompaniment • Incoming goods inspection • Reverse engineering • Tool correction • Initial sampling • Area comparison • Quality inspection Scope of delivery: • Measuring arm 8530 • AS1 Scanner • Control Pack 3 (CP3) • Magnetic mounting plate • Transport and accessory case • Pushbutton set / reference accessories • Power supply, cables and other accessories
Key data: 500 kN, 70 g/PS, 30 mm
1.0 pcs. Injection moulding machine Manufacturer: ENGEL Type: VICTORY 200/50 TECH Year of Make: 2007 Clamping force: 50 tons Spar spacing: SPARLESS Screws DN: 30 mm Moulded part weight 70 g/hp Control: CC200 Equipment: -1 x core pull hydraulic
Single folding machine Heidelberg Postpress, type RFH-82, built in 2005, Delivery and banding machine system, Fabr. Palamides, type Delta 703 Destacker Heidelberg Stahlfolder, Station PD-94-T Pressing and banding delivery Palamides Delta 1005 Folding machine Heidelberg, product 2TD-94, year 2006, 10 bags, Product PD-94, year 2006, Pressing and banding delivery Palamides Delta 1005, built in 2007 Folding machine Heidelberg, product 2TD-94, year 2005, Product SSP-94. D, year 2005, Banding and stacking delivery system Palamides, type BA-900, year 2001 Single mailer machine Stahl GmbH & C, station D 66-M, 8-bag Folding machine Heidelberg Postpress, type RFH-82, built in 2005, Delivery and banding machine system Palamides Delta 703
Year: 2002 New-exhibition machine, never used in production. - flash limit: 0,8 – 2 mm - angle range 30-180 degrees - maximum welding height: 200 mm - maximum welding width: 215 mm (at 90°)
W7042, 420,TH7035,T7042,T7035,TH7042,T9535 Auction-ID: A1-50849-17
Max. welding power: 50kVA See photos for more details Auction-ID: A7-50868-60
Offer 26236 Technical data: - Max. working width 3040 mm - Max. material thickness ST 37 4 mm - Swing-out upper beam - Bending angle adjustment electronically pre-selectable 0 - 135 ° - Max. lifting height of the upper beam 350 mm - Lifting height of the upper beam can be electronically preselected - Adjustability - bending beam 125 mm - The lower beam 125 mm - Upper bolster drive 400 V / 4.0 kW - Bending beam drive 400 V / 5.5 kW - Space requirement approx. W 3950 x H 1600 x D 1200 mm - Weight approx. 4800 kg - with: - Footswitch - Bending rails - Backgauge
Lg.Nr. 26254 Technical data: - Max. working width 1310 mm - Max. material thickness 2 mm - Bending angle approx. 0 - 135 ° - Upper beam is operated with side hand crank - Max. stroke upper beam 85 mm - Max. adjustment bending beam 80 mm - Bending process is supported by eccentric weight - Space requirement approx. W 2250 x H 1250 x D 450 mm - Weight approx. 620 kg
Fully automatic slicer Used machine with digital control Knife size: 330 mm with automatic filing, programmable, Stepless cutting thickness adjustment: 0.5mm to 10mm Carriage for 400 mm clamping length 180cm width with base frame
Year of manufacture: 1986 Machine no.: 16401 Longitudinal stroke (X): 800 mm Cross stroke (Y): 300 mm Vertical stroke (Z): 520 mm Table dimensions: 1200 x 280 mm Weight: 2,150 kg Auction-ID: A1-50714-4080
Code: 0028 Brand: OMG Model: EPM/70 Automatic slotting machine for blinds Technical data Spindle connection mm 10 Drill speed 12000 rpm Simultaneous machining of 2 sections 18 possible pitches with a single toothed rod Slots depth up to 25 mm Drill motor Hp 1,5 Slide motor Hp 1 Up to 20 slots / minute Inclination from from 90 degrees (vertical) to 0 degrees (horizontal) Max section dimensions mm 100 x 120 Automatic stop Overall dimensions: machine mm 1500 x 1000 x 1200 h - kg 490 - Rack mm 3200 x 100 x 200 h - kg 30
Automatic Label Applying Machine with YASKAWA Robot Automatic labeling machine equipped with a YASKAWA robot, designed for automated labeling operations in industrial environments. This installation is intended for the identification and marking of products on the production line. Very little used machine and sold complete with its robot. Features: Type: Automatic Label Applying Machine Built-in robot: YASKAWA Function: Industrial automatic labeling Configuration: sold complete with robot Condition: second-hand – machine very little used Dimensions (L x W x H): 240 x 240 x 220 cm Weight: 1,500 kg Used professional machine in very good general condition. Auction-ID: A1-50714-4008
Manufacturer: KAO FONG MACHINERY CO., LTD. (KAFO) Year: 1990 Type: CNC Vertical Machining Center Numerical Control: FANUC Series 15-M Axes: 3-axis (X, Y, Z) Strokes: X 1030 mm / Y 210 mm / Z 610 mm Spindle: BT40 – up to 6000 rpm – power approx. 11 kW Tool magazine: 20 positions BT40 Weight: approx. 6000 kg Origin: Taiwan Notes: Robust CNC vertical boring milling machine for general machining. Auction-ID: A1-50714-4018
V: 380 A: 1.9 kW: 0.9 Mubea Model 3s/4L Hand lever shears / manual sheet metal shears Auction-ID: A7-50868-61
Max. welding power: 107 kVA Auction-ID: A7-50868-59
Table dimensions: 1067 x 229 mm (42 x 9 inches) T-slots: 3 x 16 mm slots (63.5 mm o.c.) Longitudinal stroke (X): 762 mm Cross stroke (Y): 381 mm Vertical console travel (Z): 406 mm Spindle taper: ISO 40 (or R-8 depending on stock options) Spindle speeds: continuously variable from 60 to 4,250 rpm Duct travel: 127 mm, automatic descents 0.04 / 0.08 / 0.15 mm/rpm Spindle motor: 3 hp (2.2 kW) Weight: approx. 1,450 kg Auction-ID: A1-50714-4065
SMIPACK S560NA – L-shaped wrapping machine with bell SMIPACK S560NA wrapping machine, L-shaped chamber packaging machine designed for the packaging of products in shrink film. This equipment allows film wrapping operations to be carried out to ensure the protection, presentation and packaging of products. It is suitable for industrial, logistics and packaging line environments. Features: Brand: SMIPACK Model: S560NA Type: L-shaped wrapping machine with bell Application: shrink wrapping Use: industrial and professional packaging Dimensions (L x W x H): 201 x 79 x 143 cm Weight: 153 kg Equipment sold as is. Auction-ID: A1-50714-4106
Serial number: 22760 Longitudinal stroke (X): 800 mm Cross stroke (Y): 550 mm Vertical stroke (Z): 500 mm Spindle taper: ISO 40 Spindle speeds: up to 4,000 rpm (or 6,300 rpm depending on transmission/drive versions) Motor power: 7.5 kW Operating voltage: 380 V three-phase, 50/60 Hz Auction-ID: A1-50714-4201
Working parameters: Industrial machine for setting the teeth of band saw blades. Auction-ID: A1-50714-4305
SISMA SARTY 200F – Industrial Laser Machine SISMA SARTY 200F industrial laser machine, designed for welding, repair and precision work applications in industrial and technical environments. This professional equipment is particularly suitable for specialized workshops, precision industries and technical applications requiring the use of laser technology. Features: Brand: SISMA Model: SARTY 200F Type: Industrial Laser Serial Number: L1001764010 Year: 2010 Manufacture: Italy Power supply: 200/240 V – 50/60 Hz Power: 1,400 W Consumption: 0.7 kW Dimensions (L x W x H): 127 x 90 x 210 cm Weight: 196 kg Equipment sold as is. Professional equipment that may show traces of use related to its industrial operation. Auction-ID: A1-50714-4095
ONA – ONA-COMPACT-2 – EDM Machine ONA ONA-COMPACT-2 industrial machine tool, manufactured in 1990, for electrical discharge machining (EDM). This process allows conductive metal parts to be precisely machined by means of controlled electrical discharges. The machine is particularly suitable for the production of parts with complex geometries and for the manufacture of moulds, dies, tools and technical parts. Features: Manufacturer: ONA Model: ONA-COMPACT-2 Year of Manufacture: 1990 Type: EDM / EDM machine Process: EDM machining Materials: conductive materials Application: Molds, dies, tooling, and technical parts Use: industrial and professional Machine sold as is, with the elements, accessories and equipment visible in the photographs. The operating condition, performance and compliance of the equipment have not been verified. The precise technical characteristic ...
IN-CAP – Automatic capsule filling machine Automatic IN-CAP machine designed for dosing and filling powders or granules into capsules. This equipment automates capsule filling and packaging operations. In particular, it can be adapted to pharmaceutical, nutraceutical or cosmetic production environments, depending on its configuration and use. Features: Brand: IN-CAP Type: Automatic capsule filling machine Products: powders or granules Application: dosing and filling of capsules Use: industrial and professional Dimensions (L x W x H): 90 x 72 x 170 cm Weight: 176 kg Equipment sold as is. Auction-ID: A1-50714-4081
Date of Manufacture: 08-2021 Serial No.: M150140000 Dimensions: 856 x 648 x 551 mm (34 x 25.5 x 22 inches) Empty Weight: 50 kg (110 lbs) Loaded Water Mass: 180 kg (400 lbs) Maximum Flow Rate: 1.9 L/min (0.5 gal/min) at 27.5 MPa (4,000 psi) Maximum Pressure: 27.5 MPa (4,000 psi) Maximum Water Temperature: 54 °C Maximum inlet pressure: 0.86 MPa (125 psi) Main unit: 100-240 VAC, 50/60 Hz, 2.0 A, 100 W, IP 32 Total power (unit + pump): 1.8 kW at 110 V / 2.3 kW at 220 V Auction-ID: A1-50714-4206
Control: Grundig Numerik NC Pilot Table dimensions: 800x360 mm The machines are generally offered without documentation. If documents are available, they are attached to the respective machine. Auction-ID: A7-50868-3
3 pcs different design see photos for more details Auction-ID: A7-50868-105
Max. welding power 33 kVA , see photos for more details Auction-ID: A7-50868-57
Longitudinal Stroke (X): 850 mm Transverse Stroke (Y): 275 mm Vertical Stroke (Z): 370 mm Auction-ID: A1-50714-4203
Manufacturer: LAGUN Year: 1991 Type: CNC universal milling machine Numerical control: Heidenhain TNC 355 Axes: 3 axes (X, Y, Z) Strokes: X 1100 mm / Y 600 mm / Z 600 mm Table: 1200 x 550 mm Spindle: 50 to 3000 rpm – motor power 20 kW Equipment: HURON universal head type, coolant system Remarks: Robust CNC universal milling machine for heavy and versatile milling. Auction-ID: A1-50714-4069
Details see photos The machines are generally offered without documentation. If documents are available, they are attached to the respective machine. Auction-ID: A7-50868-6
Working parameters: Manual industrial machine for sharpening and grinding cutting tool profiles. Equipment included: vertical grinding wheel with protective housing, adjustable tool holder, work table, manual movement and adjustment via handwheels, coolant/cooling device and metal protective screen. Notes: Robust construction on metal frame. Auction-ID: A1-50714-4312
Welding power. 107 kVA see photos for more details Auction-ID: A7-50868-62
Manufacturer: CME Year: 1991 Type: CNC Universal Milling Machine Numerical Control: Heidenhain TNC 124 Axes: 3 Axes (X, Y, Z) Strokes: X 1100 mm / Y 700 mm / Z 500 mm Table: 1400 x 450 mm Spindle: ISO / SK 40 – 40 to 1800 rpm – motor power 10.6 kW Dimensions: 2400 x 2150 x 2100 mm Weight: approx. 3800 kg Notes: Robust universal CNC milling machine made in Spain. Auction-ID: A1-50714-4076
maximum number of results exceeded
please refine your search
150 € 
